From fc4bee183024a35d0e730a5ca309a694a6df6774 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 19 Feb 2022 17:08:46 -0600 Subject: [PATCH] usb: ehci-omap: Remove OMAP_EHCI_PHYx_RESET_GPIO from Kconfig With the omap-ehci driver now using the phy subsystem to enable and disable reset, the driver no longer needs to know which GPIO's are used, and they can be removed from Kconfig. Signed-off-by: Adam Ford --- drivers/usb/host/Kconfig | 34 ---------------------------------- 1 file changed, 34 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f0fb66a..8f77412 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -198,40 +198,6 @@ config USB_EHCI_OMAP Enables support for the on-chip EHCI controller on OMAP3 and later SoCs. -if USB_EHCI_OMAP - -config HAS_OMAP_EHCI_PHY1_RESET_GPIO - bool "PHY #1 requires a GPIO hold to it in RESET while PHY settles" - help - Enable this to be able to configure the GPIO number used to hold the - PHY in RESET for enough time until the PHY is settled and ready. - -config OMAP_EHCI_PHY1_RESET_GPIO - int "GPIO number to hold PHY #1 in RESET" - depends on HAS_OMAP_EHCI_PHY1_RESET_GPIO - -config HAS_OMAP_EHCI_PHY2_RESET_GPIO - bool "PHY #2 requires a GPIO hold to it in RESET while PHY settles" - help - Enable this to be able to configure the GPIO number used to hold the - PHY in RESET for enough time until the PHY is settled and ready. - -config OMAP_EHCI_PHY2_RESET_GPIO - int "GPIO number to hold PHY #2 in RESET" - depends on HAS_OMAP_EHCI_PHY2_RESET_GPIO - -config HAS_OMAP_EHCI_PHY3_RESET_GPIO - bool "PHY #3 requires a GPIO hold to it in RESET while PHY settles" - help - Enable this to be able to configure the GPIO number used to hold the - PHY in RESET for enough time until the PHY is settled and ready. - -config OMAP_EHCI_PHY3_RESET_GPIO - int "GPIO number to hold PHY #3 in RESET" - depends on HAS_OMAP_EHCI_PHY3_RESET_GPIO - -endif - config USB_EHCI_VF bool "Support for Vybrid on-chip EHCI USB controller" depends on ARCH_VF610 -- 2.7.4