From fc153c8f283bf5925615195fc9d4056414d7b168 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Tue, 12 Jul 2022 21:52:29 -0500 Subject: [PATCH] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO H6 requires I/O bias configuration on both of its PIO devices. Previously it was only done for the main PIO. The setting for Port L is at bit 0, so the bank calculation needs to account for the pin base. Otherwise the wrong bit is used. Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6") Reviewed-by: Jernej Skrabec Tested-by: Heiko Stuebner Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20220713025233.27248-3-samuel@sholland.org Signed-off-by: Linus Walleij --- drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 1 + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c index 487a76c..3aba0ae 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c @@ -106,6 +106,7 @@ static const struct sunxi_pinctrl_desc sun50i_h6_r_pinctrl_data = { .npins = ARRAY_SIZE(sun50i_h6_r_pins), .pin_base = PL_BASE, .irq_banks = 2, + .io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL, }; static int sun50i_h6_r_pinctrl_probe(struct platform_device *pdev) diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index d9327d7..3c5e713 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -622,7 +622,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl, unsigned pin, struct regulator *supply) { - unsigned short bank = pin / PINS_PER_BANK; + unsigned short bank; unsigned long flags; u32 val, reg; int uV; @@ -638,6 +638,9 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl, if (uV == 0) return 0; + pin -= pctl->desc->pin_base; + bank = pin / PINS_PER_BANK; + switch (pctl->desc->io_bias_cfg_variant) { case BIAS_VOLTAGE_GRP_CONFIG: /* @@ -655,8 +658,6 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl, else val = 0xD; /* 3.3V */ - pin -= pctl->desc->pin_base; - reg = readl(pctl->membase + sunxi_grp_config_reg(pin)); reg &= ~IO_BIAS_MASK; writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin)); -- 2.7.4