From fa0cd34b38729a59a40fa946fc621df3ef0924cd Mon Sep 17 00:00:00 2001 From: Jim Meyering Date: Sun, 10 Jun 2012 22:03:49 +0200 Subject: [PATCH] maint: grammar fixes: s/all these/all of these/ Run this command: git grep -li '\' \ |xargs perl -pi -e 's/\b([Aa])ll these\b/${1}ll of these/' --- NEWS | 2 +- doc/automake-history.texi | 6 +++--- doc/automake.texi | 24 ++++++++++++------------ doc/fdl.texi | 2 +- lib/texinfo.tex | 2 +- old/ChangeLog.01 | 2 +- old/ChangeLog.11 | 2 +- t/tap-whitespace-normalization.sh | 2 +- 8 files changed, 21 insertions(+), 21 deletions(-) diff --git a/NEWS b/NEWS index cf45836c4..fd52dea3e 100644 --- a/NEWS +++ b/NEWS @@ -1632,7 +1632,7 @@ New in 1.8: rule for this target. Running `automake -Woverride' will diagnose all such overriding definitions. - It should be noted that almost all these targets support a *-local + It should be noted that almost all of these targets support a *-local variant that is meant to supplement the automake-defined rule (See node `Extending' in the manual). The above rule should be rewritten as diff --git a/doc/automake-history.texi b/doc/automake-history.texi index 5cb368595..7bbdeb49b 100644 --- a/doc/automake-history.texi +++ b/doc/automake-history.texi @@ -560,7 +560,7 @@ sights on automake@dots{} and now it has arrived! -- Tom Tromey It's only the beginning: in two months he will send 192 patches. Then he would slow down so Tom can catch up and review all this. Initially -Tom actually read all these patches, then he probably trustingly +Tom actually read all of these patches, then he probably trustingly answered OK to most of them, and finally gave up and let Akim apply whatever he wanted. There was no way to keep up with that patch rate. @@ -570,7 +570,7 @@ sourcequake; I have yet to figure where the relevant passage has been moved :) -- Alexandre Duret-Lutz @end quotation -All these patches were sent to and discussed on +All of these patches were sent to and discussed on @email{automake@@gnu.org}, so subscribed users were literally drowning in technical mails. Eventually, the @email{automake-patches@@gnu.org} mailing list was created in May. @@ -581,7 +581,7 @@ fragments. In 1.4, lots of @file{Makefile} rules are being emitted at various places in the @command{automake} script itself; this does not help ensuring a consistent treatment of these rules (for instance making sure that user-defined rules override Automake's own rules). -One of Akim's goal was moving all these hard-coded rules to separate +One of Akim's goal was moving all of these hard-coded rules to separate @file{Makefile} fragments, so the logic could be centralized in a @file{Makefile} fragment processor. diff --git a/doc/automake.texi b/doc/automake.texi index 939fe4425..120dbea84 100644 --- a/doc/automake.texi +++ b/doc/automake.texi @@ -540,7 +540,7 @@ illustration of the GNU Build System in action. @cindex @file{amhello-1.0.tar.gz}, use cases In this section we explore several use cases for the GNU Build System. -You can replay all these examples on the @file{amhello-1.0.tar.gz} +You can replay all of these examples on the @file{amhello-1.0.tar.gz} package distributed with Automake. If Automake is installed on your system, you should find a copy of this file in @file{@var{prefix}/share/doc/automake/amhello-1.0.tar.gz}, where @@ -1567,7 +1567,7 @@ when you execute @command{make}. @command{autoreconf} is a script that calls @command{autoconf}, @command{automake}, and a bunch of other commands in the right order. If you are beginning with these tools, it is not important to figure -out in which order all these tools should be invoked and why. However, +out in which order all of these tools should be invoked and why. However, because Autoconf and Automake have separate manuals, the important point to understand is that @command{autoconf} is in charge of creating @file{configure} from @file{configure.ac}, while @@ -2868,7 +2868,7 @@ make reference to @samp{$file} as @samp{$@{file@}} (i.e., in a way that is compatible with @command{make}'s syntax) and furthermore use @code{AC_SUBST} to ensure that @samp{$@{file@}} is meaningful in a @file{Makefile}, then @command{automake} will be able to use -@samp{$@{file@}} to generate all these rules. For instance, here is +@samp{$@{file@}} to generate all of these rules. For instance, here is how the Automake package itself generates versioned scripts for its test suite: @@ -3560,7 +3560,7 @@ lot of people, because @command{aclocal} was not so strict in the past and many third party macros are underquoted; and we have to apologize for this temporary inconvenience. The reason we have to be stricter is that a future implementation of @command{aclocal} (@pxref{Future of -aclocal}) will have to temporarily include all these third party +aclocal}) will have to temporarily include all of these third party @file{.m4} files, maybe several times, including even files that are not actually needed. Doing so should alleviate many problems of the current implementation, however it requires a stricter style from the @@ -3626,7 +3626,7 @@ will be almost impossible to share macros between packages. @vindex ACLOCAL_AMFLAGS The second possibility, which we do recommend, is to write each macro -in its own file and gather all these files in a directory. This +in its own file and gather all of these files in a directory. This directory is usually called @file{m4/}. To build @file{aclocal.m4}, one should therefore instruct @command{aclocal} to scan @file{m4/}. From the command line, this is done with @samp{aclocal -I m4}. The @@ -7790,7 +7790,7 @@ This is a convenience variable that is defined as @samp{$(pyexecdir)/$(PACKAGE)}. @end vtable -All these directory variables have values that start with either +All of these directory variables have values that start with either @samp{$@{prefix@}} or @samp{$@{exec_prefix@}} unexpanded. This works fine in @file{Makefiles}, but it makes these variables hard to use in @file{configure}. This is mandated by the GNU coding standards, so @@ -7856,7 +7856,7 @@ can be installed with @samp{make install-dvi}, @samp{make install-ps}, documentation installed by default as well as all the above optional formats. -All these targets can be extended using @samp{-local} rules +All of these targets can be extended using @samp{-local} rules (@pxref{Extending}). @cindex Texinfo flag, @code{VERSION} @@ -11410,7 +11410,7 @@ If you have ever used Gettext in a project, this is a good example of how third-party @file{Makefile}s can be used with Automake. The @file{Makefile}s @command{gettextize} puts in the @file{po/} and @file{intl/} directories are handwritten @file{Makefile}s that -implement all these targets. That way they can be added to +implement all of these targets. That way they can be added to @code{SUBDIRS} in Automake packages. Directories that are only listed in @code{DIST_SUBDIRS} but not in @@ -11611,7 +11611,7 @@ built from @file{Makefile.am} by @command{automake}, and rely on the definitions of the M4 macros put in @file{aclocal.m4} as well as the behavior of the auxiliary tools installed. -Because all these files are closely related, it is important to +Because all of these files are closely related, it is important to regenerate all of them when upgrading to a newer Automake release. The usual way to do that is @@ -11631,7 +11631,7 @@ autoreconf -vfi The use of @option{--force-missing} ensures that auxiliary tools will be overridden by new versions (@pxref{automake Invocation}). -It is important to regenerate all these files each time Automake is +It is important to regenerate all of these files each time Automake is upgraded, even between bug fixes releases. For instance, it is not unusual for a bug fix to involve changes to both the rules generated in @file{Makefile.in} and the supporting M4 macros copied to @@ -11768,7 +11768,7 @@ Or people use a script to fix the timestamp after a checkout (the GCC folks have such a script). @item Or @file{configure.ac} uses @code{AM_MAINTAINER_MODE}, which will -disable all these rebuild rules by default. This is further discussed +disable all of these rebuild rules by default. This is further discussed in @ref{maintainer-mode}. @end itemize @@ -12398,7 +12398,7 @@ every target in a @file{Makefile.in}. Using variables like this gives you full control over the ordering of the flags. For instance, if there is a flag in $(WARNINGCFLAGS) that you want to negate for a particular target, you can use something like -@samp{prog1_CFLAGS = $(AM_CFLAGS) -no-flag}. If all these flags had +@samp{prog1_CFLAGS = $(AM_CFLAGS) -no-flag}. If all of these flags had been forcefully appended to @code{CFLAGS}, there would be no way to disable one flag. Yet another reason to leave user variables to users. diff --git a/doc/fdl.texi b/doc/fdl.texi index 38bfdd23a..d9d28ea86 100644 --- a/doc/fdl.texi +++ b/doc/fdl.texi @@ -151,7 +151,7 @@ COPYING IN QUANTITY If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the -copies in covers that carry, clearly and legibly, all these Cover +copies in covers that carry, clearly and legibly, all of these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present diff --git a/lib/texinfo.tex b/lib/texinfo.tex index 0f3a0960c..c2901b923 100644 --- a/lib/texinfo.tex +++ b/lib/texinfo.tex @@ -6150,7 +6150,7 @@ end % Same as \defaultparindent. \newdimen\tocindent \tocindent = 15pt -% Now for the actual typesetting. In all these, #1 is the text and #2 is the +% Now for the actual typesetting. In all of these, #1 is the text and #2 is the % page number. % % If the toc has to be broken over pages, we want it to be at chapters diff --git a/old/ChangeLog.01 b/old/ChangeLog.01 index cb7b37a41..f8b413f6c 100644 --- a/old/ChangeLog.01 +++ b/old/ChangeLog.01 @@ -4558,7 +4558,7 @@ contents. (dist-all, dist-bzip2, dist-zip, dist-tarZ): New conditional targets. - And BTW, all these guys are phony. + And BTW, all of these guys are phony. * automake.in (&handle_dist_worker): As its name doesn't indicate, output distributions. (&handle_dist): As its name doesn't indicate, don't. diff --git a/old/ChangeLog.11 b/old/ChangeLog.11 index ce9d2b8ad..f6a14542a 100644 --- a/old/ChangeLog.11 +++ b/old/ChangeLog.11 @@ -9096,7 +9096,7 @@ tests: optimize `instspc-*.test' for speed After the split of `instspc.test' into various generated tests, the running time of the testsuite has noticeably increased, since - all these new generated tests must run aclocal, autoconf and + all of these new generated tests must run aclocal, autoconf and automake, whereas previously they were run only once (at the beginning of `instspc.test'). But luckily, since the new tests share the same input files for the autotools, this situation can diff --git a/t/tap-whitespace-normalization.sh b/t/tap-whitespace-normalization.sh index a43d29a1f..3108fc667 100755 --- a/t/tap-whitespace-normalization.sh +++ b/t/tap-whitespace-normalization.sh @@ -15,7 +15,7 @@ # along with this program. If not, see . # TAP support: whitespace normalization (or lack thereof) in the testsuite -# progress output on console. We keep all these checks here in a single +# progress output on console. We keep all of these checks here in a single # script so that a potential cosmetic change in the output format won't # force us to tweak dozens of other tests (hopefully). # See also related test 'tap-todo-skip-whitespace.test'. -- 2.34.1