From f8a15a9650694feaa0dabf197b0c94d37cd3fb42 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 26 May 2016 17:23:29 +0200 Subject: [PATCH] usb: host: ehci-tegra: Grab the correct UTMI pads reset There are three EHCI controllers on Tegra SoCs, each with its own reset line. However, the first controller contains a set of UTMI configuration registers that are shared with its siblings. These registers will only be reset as part of the first controller's reset. For proper operation it must be ensured that the UTMI configuration registers are reset before any of the EHCI controllers are enabled, irrespective of the probe order. Commit a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") introduced code that ensures the first controller is always reset before setting up any of the controllers, and is never again reset afterwards. This code, however, grabs the wrong reset. Each EHCI controller has two reset controls attached: 1) the USB controller reset and 2) the UTMI pads reset (really the first controller's reset). In order to reset the UTMI pads registers the code must grab the second reset, but instead it grabbing the first. Fixes: a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") Acked-by: Jon Hunter Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 4031b37..c1c1024 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -89,7 +89,7 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) if (!usb1_reset_attempted) { struct reset_control *usb1_reset; - usb1_reset = of_reset_control_get(phy_np, "usb"); + usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); if (IS_ERR(usb1_reset)) { dev_warn(&pdev->dev, "can't get utmi-pads reset from the PHY\n"); -- 2.7.4