From f84224402bddea8e2762869f4eaebc3b46be2aa0 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Sat, 1 Mar 2014 21:15:57 +0100 Subject: [PATCH] ath9k_htc: use ath9k_cmn_beacon_config_sta Signed-off-by: Oleksij Rempel Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 84 +------------------------ 1 file changed, 2 insertions(+), 82 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c index 9ff9e6e..fc16c10 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c @@ -62,97 +62,17 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv) } } - static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv, struct ath_beacon_config *bss_conf) { - struct ath_common *common = ath9k_hw_common(priv->ah); struct ath9k_beacon_state bs; enum ath9k_int imask = 0; - int dtimperiod, dtimcount; - int bmiss_timeout; - u32 nexttbtt = 0, intval, tsftu; __be32 htc_imask = 0; - u64 tsf; - int num_beacons, offset, dtim_dec_count; int ret __attribute__ ((unused)); u8 cmd_rsp; - memset(&bs, 0, sizeof(bs)); - - intval = bss_conf->beacon_interval; - bmiss_timeout = (ATH_DEFAULT_BMISS_LIMIT * bss_conf->beacon_interval); - - /* - * Setup dtim parameters according to - * last beacon we received (which may be none). - */ - dtimperiod = bss_conf->dtim_period; - if (dtimperiod <= 0) /* NB: 0 if not known */ - dtimperiod = 1; - dtimcount = 1; - if (dtimcount >= dtimperiod) /* NB: sanity check */ - dtimcount = 0; - - /* - * Pull nexttbtt forward to reflect the current - * TSF and calculate dtim state for the result. - */ - tsf = ath9k_hw_gettsf64(priv->ah); - tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; - - num_beacons = tsftu / intval + 1; - offset = tsftu % intval; - nexttbtt = tsftu - offset; - if (offset) - nexttbtt += intval; - - /* DTIM Beacon every dtimperiod Beacon */ - dtim_dec_count = num_beacons % dtimperiod; - dtimcount -= dtim_dec_count; - if (dtimcount < 0) - dtimcount += dtimperiod; - - bs.bs_intval = TU_TO_USEC(intval); - bs.bs_nexttbtt = TU_TO_USEC(nexttbtt); - bs.bs_dtimperiod = dtimperiod * bs.bs_intval; - bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount * bs.bs_intval; - - /* - * Calculate the number of consecutive beacons to miss* before taking - * a BMISS interrupt. The configuration is specified in TU so we only - * need calculate based on the beacon interval. Note that we clamp the - * result to at most 15 beacons. - */ - bs.bs_bmissthreshold = DIV_ROUND_UP(bmiss_timeout, intval); - if (bs.bs_bmissthreshold > 15) - bs.bs_bmissthreshold = 15; - else if (bs.bs_bmissthreshold <= 0) - bs.bs_bmissthreshold = 1; - - /* - * Calculate sleep duration. The configuration is given in ms. - * We ensure a multiple of the beacon period is used. Also, if the sleep - * duration is greater than the DTIM period then it makes senses - * to make it a multiple of that. - * - * XXX fixed at 100ms - */ - - bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100), - intval)); - if (bs.bs_sleepduration > bs.bs_dtimperiod) - bs.bs_sleepduration = bs.bs_dtimperiod; - - /* TSF out of range threshold fixed at 1 second */ - bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD; - - ath_dbg(common, CONFIG, "intval: %u tsf: %llu tsftu: %u\n", - intval, tsf, tsftu); - ath_dbg(common, CONFIG, "bmiss: %u sleep: %u\n", - bs.bs_bmissthreshold, bs.bs_sleepduration); - - /* Set the computed STA beacon timers */ + if (ath9k_cmn_beacon_config_sta(priv->ah, bss_conf, &bs) == -EPERM) + return; WMI_CMD(WMI_DISABLE_INTR_CMDID); ath9k_hw_set_sta_beacon_timers(priv->ah, &bs); -- 2.7.4