From f8179c89d7b1b3acb92460594b9adf1fbdf5a424 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Thu, 15 Sep 2022 18:34:29 -0500 Subject: [PATCH] arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size Wrap the usb and sata controllers in an intermediate simple-bus and use it to constrain the dma address size of these usb controllers to the 40 bits that they generate toward the interconnect. This is required because the SoC uses 48 bits address sizes and this mismatch would lead to smmu context faults because the usb generates 40-bit addresses while the smmu page tables are populated with 48-bit wide addresses. Suggested-by: Robin Murphy Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 90 ++++++++++++++------------ 1 file changed, 49 insertions(+), 41 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index e406499..132d7893 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -710,47 +710,55 @@ QORIQ_CLK_PLL_DIV(2)>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - usb3-lpm-capable; - }; - - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - usb3-lpm-capable; - }; - - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - usb3-lpm-capable; - }; - - sata: sata@3200000 { - compatible = "fsl,ls1046a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = ; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(2)>; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + usb3-lpm-capable; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + }; }; msi1: msi-controller@1580000 { -- 2.7.4