From f6cc45c854da0c964d1541712bb3326c72020a1c Mon Sep 17 00:00:00 2001 From: Pascal van Leeuwen Date: Mon, 19 Aug 2019 16:40:26 +0200 Subject: [PATCH] crypto: inside-secure - add support for using the EIP197 without vendor firmware Until now, the inside-secure driver required a set of firmware images supplied by the silicon vendor, typically under NDA, to be present in /lib/firmware/inside-secure in order to be able to function. This patch removes the dependence on this official vendor firmware by falling back to generic "mini" FW - developed specifically for this driver - that can be provided under GPL 2.0 through linux-firmwares. Signed-off-by: Pascal van Leeuwen Acked-by: Antoine Tenart Signed-off-by: Herbert Xu --- drivers/crypto/inside-secure/safexcel.c | 194 ++++++++++++++++++++++++-------- drivers/crypto/inside-secure/safexcel.h | 12 ++ 2 files changed, 161 insertions(+), 45 deletions(-) diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c index dfe22d2..e12a2a3 100644 --- a/drivers/crypto/inside-secure/safexcel.c +++ b/drivers/crypto/inside-secure/safexcel.c @@ -108,44 +108,143 @@ static void eip197_trc_cache_init(struct safexcel_crypto_priv *priv) writel(val, priv->base + EIP197_TRC_PARAMS); } -static void eip197_write_firmware(struct safexcel_crypto_priv *priv, - const struct firmware *fw, int pe, u32 ctrl, - u32 prog_en) +static void eip197_init_firmware(struct safexcel_crypto_priv *priv) { - const u32 *data = (const u32 *)fw->data; + int pe, i; u32 val; - int i; - /* Reset the engine to make its program memory accessible */ - writel(EIP197_PE_ICE_x_CTRL_SW_RESET | - EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR | - EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR, - EIP197_PE(priv) + ctrl); + for (pe = 0; pe < priv->config.pes; pe++) { + /* Configure the token FIFO's */ + writel(3, EIP197_PE(priv) + EIP197_PE_ICE_PUTF_CTRL(pe)); + writel(0, EIP197_PE(priv) + EIP197_PE_ICE_PPTF_CTRL(pe)); + + /* Clear the ICE scratchpad memory */ + val = readl(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe)); + val |= EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_TIMER | + EIP197_PE_ICE_SCRATCH_CTRL_TIMER_EN | + EIP197_PE_ICE_SCRATCH_CTRL_SCRATCH_ACCESS | + EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_ACCESS; + writel(val, EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe)); + + /* clear the scratchpad RAM using 32 bit writes only */ + for (i = 0; i < EIP197_NUM_OF_SCRATCH_BLOCKS; i++) + writel(0, EIP197_PE(priv) + + EIP197_PE_ICE_SCRATCH_RAM(pe) + (i<<2)); + + /* Reset the IFPP engine to make its program mem accessible */ + writel(EIP197_PE_ICE_x_CTRL_SW_RESET | + EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR | + EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR, + EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe)); + + /* Reset the IPUE engine to make its program mem accessible */ + writel(EIP197_PE_ICE_x_CTRL_SW_RESET | + EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR | + EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR, + EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe)); + + /* Enable access to all IFPP program memories */ + writel(EIP197_PE_ICE_RAM_CTRL_FPP_PROG_EN, + EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe)); + } + +} - /* Enable access to the program memory */ - writel(prog_en, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe)); +static int eip197_write_firmware(struct safexcel_crypto_priv *priv, + const struct firmware *fw) +{ + const u32 *data = (const u32 *)fw->data; + int i; /* Write the firmware */ for (i = 0; i < fw->size / sizeof(u32); i++) writel(be32_to_cpu(data[i]), priv->base + EIP197_CLASSIFICATION_RAMS + i * sizeof(u32)); - /* Disable access to the program memory */ - writel(0, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe)); + /* Exclude final 2 NOPs from size */ + return i - EIP197_FW_TERMINAL_NOPS; +} + +/* + * If FW is actual production firmware, then poll for its initialization + * to complete and check if it is good for the HW, otherwise just return OK. + */ +static bool poll_fw_ready(struct safexcel_crypto_priv *priv, int fpp) +{ + int pe, pollcnt; + u32 base, pollofs; + + if (fpp) + pollofs = EIP197_FW_FPP_READY; + else + pollofs = EIP197_FW_PUE_READY; - /* Release engine from reset */ - val = readl(EIP197_PE(priv) + ctrl); - val &= ~EIP197_PE_ICE_x_CTRL_SW_RESET; - writel(val, EIP197_PE(priv) + ctrl); + for (pe = 0; pe < priv->config.pes; pe++) { + base = EIP197_PE_ICE_SCRATCH_RAM(pe); + pollcnt = EIP197_FW_START_POLLCNT; + while (pollcnt && + (readl_relaxed(EIP197_PE(priv) + base + + pollofs) != 1)) { + pollcnt--; + } + if (!pollcnt) { + dev_err(priv->dev, "FW(%d) for PE %d failed to start\n", + fpp, pe); + return false; + } + } + return true; +} + +static bool eip197_start_firmware(struct safexcel_crypto_priv *priv, + int ipuesz, int ifppsz, int minifw) +{ + int pe; + u32 val; + + for (pe = 0; pe < priv->config.pes; pe++) { + /* Disable access to all program memory */ + writel(0, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe)); + + /* Start IFPP microengines */ + if (minifw) + val = 0; + else + val = EIP197_PE_ICE_UENG_START_OFFSET((ifppsz - 1) & + EIP197_PE_ICE_UENG_INIT_ALIGN_MASK) | + EIP197_PE_ICE_UENG_DEBUG_RESET; + writel(val, EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe)); + + /* Start IPUE microengines */ + if (minifw) + val = 0; + else + val = EIP197_PE_ICE_UENG_START_OFFSET((ipuesz - 1) & + EIP197_PE_ICE_UENG_INIT_ALIGN_MASK) | + EIP197_PE_ICE_UENG_DEBUG_RESET; + writel(val, EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe)); + } + + /* For miniFW startup, there is no initialization, so always succeed */ + if (minifw) + return true; + + /* Wait until all the firmwares have properly started up */ + if (!poll_fw_ready(priv, 1)) + return false; + if (!poll_fw_ready(priv, 0)) + return false; + + return true; } static int eip197_load_firmwares(struct safexcel_crypto_priv *priv) { const char *fw_name[] = {"ifpp.bin", "ipue.bin"}; const struct firmware *fw[FW_NB]; - char fw_path[31], *dir = NULL; + char fw_path[37], *dir = NULL; int i, j, ret = 0, pe; - u32 val; + int ipuesz, ifppsz, minifw = 0; if (priv->version == EIP197D_MRVL) dir = "eip197d"; @@ -155,51 +254,56 @@ static int eip197_load_firmwares(struct safexcel_crypto_priv *priv) else return -ENODEV; +retry_fw: for (i = 0; i < FW_NB; i++) { - snprintf(fw_path, 31, "inside-secure/%s/%s", dir, fw_name[i]); - ret = request_firmware(&fw[i], fw_path, priv->dev); + snprintf(fw_path, 37, "inside-secure/%s/%s", dir, fw_name[i]); + ret = firmware_request_nowarn(&fw[i], fw_path, priv->dev); if (ret) { - if (priv->version != EIP197B_MRVL) + if (minifw || priv->version != EIP197B_MRVL) goto release_fw; /* Fallback to the old firmware location for the * EIP197b. */ - ret = request_firmware(&fw[i], fw_name[i], priv->dev); - if (ret) { - dev_err(priv->dev, - "Failed to request firmware %s (%d)\n", - fw_name[i], ret); + ret = firmware_request_nowarn(&fw[i], fw_name[i], + priv->dev); + if (ret) goto release_fw; - } } } - for (pe = 0; pe < priv->config.pes; pe++) { - /* Clear the scratchpad memory */ - val = readl(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe)); - val |= EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_TIMER | - EIP197_PE_ICE_SCRATCH_CTRL_TIMER_EN | - EIP197_PE_ICE_SCRATCH_CTRL_SCRATCH_ACCESS | - EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_ACCESS; - writel(val, EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe)); + eip197_init_firmware(priv); - memset_io(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_RAM(pe), 0, - EIP197_NUM_OF_SCRATCH_BLOCKS * sizeof(u32)); + ifppsz = eip197_write_firmware(priv, fw[FW_IFPP]); - eip197_write_firmware(priv, fw[FW_IFPP], pe, - EIP197_PE_ICE_FPP_CTRL(pe), - EIP197_PE_ICE_RAM_CTRL_FPP_PROG_EN); + /* Enable access to IPUE program memories */ + for (pe = 0; pe < priv->config.pes; pe++) + writel(EIP197_PE_ICE_RAM_CTRL_PUE_PROG_EN, + EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe)); - eip197_write_firmware(priv, fw[FW_IPUE], pe, - EIP197_PE_ICE_PUE_CTRL(pe), - EIP197_PE_ICE_RAM_CTRL_PUE_PROG_EN); + ipuesz = eip197_write_firmware(priv, fw[FW_IPUE]); + + if (eip197_start_firmware(priv, ipuesz, ifppsz, minifw)) { + dev_dbg(priv->dev, "Firmware loaded successfully"); + return 0; } + ret = -ENODEV; + release_fw: for (j = 0; j < i; j++) release_firmware(fw[j]); + if (!minifw) { + /* Retry with minifw path */ + dev_dbg(priv->dev, "Firmware set not (fully) present or init failed, falling back to BCLA mode\n"); + dir = "eip197_minifw"; + minifw = 1; + goto retry_fw; + } + + dev_dbg(priv->dev, "Firmware load failed.\n"); + return ret; } diff --git a/drivers/crypto/inside-secure/safexcel.h b/drivers/crypto/inside-secure/safexcel.h index 2db2a96..33e5f66 100644 --- a/drivers/crypto/inside-secure/safexcel.h +++ b/drivers/crypto/inside-secure/safexcel.h @@ -136,8 +136,10 @@ #define EIP197_PE_IN_TBUF_THRES(n) (0x0100 + (0x2000 * (n))) #define EIP197_PE_ICE_SCRATCH_RAM(n) (0x0800 + (0x2000 * (n))) #define EIP197_PE_ICE_PUE_CTRL(n) (0x0c80 + (0x2000 * (n))) +#define EIP197_PE_ICE_PUTF_CTRL(n) (0x0d00 + (0x2000 * (n))) #define EIP197_PE_ICE_SCRATCH_CTRL(n) (0x0d04 + (0x2000 * (n))) #define EIP197_PE_ICE_FPP_CTRL(n) (0x0d80 + (0x2000 * (n))) +#define EIP197_PE_ICE_PPTF_CTRL(n) (0x0e00 + (0x2000 * (n))) #define EIP197_PE_ICE_RAM_CTRL(n) (0x0ff0 + (0x2000 * (n))) #define EIP197_PE_EIP96_TOKEN_CTRL(n) (0x1000 + (0x2000 * (n))) #define EIP197_PE_EIP96_FUNCTION_EN(n) (0x1004 + (0x2000 * (n))) @@ -228,6 +230,11 @@ #define EIP197_DxE_THR_CTRL_EN BIT(30) #define EIP197_DxE_THR_CTRL_RESET_PE BIT(31) +/* EIP197_PE_ICE_PUE/FPP_CTRL */ +#define EIP197_PE_ICE_UENG_START_OFFSET(n) ((n) << 16) +#define EIP197_PE_ICE_UENG_INIT_ALIGN_MASK 0x7ff0 +#define EIP197_PE_ICE_UENG_DEBUG_RESET BIT(3) + /* EIP197_HIA_AIC_G_ENABLED_STAT */ #define EIP197_G_IRQ_DFE(n) BIT((n) << 1) #define EIP197_G_IRQ_DSE(n) BIT(((n) << 1) + 1) @@ -503,6 +510,11 @@ struct safexcel_command_desc { * Internal structures & functions */ +#define EIP197_FW_TERMINAL_NOPS 2 +#define EIP197_FW_START_POLLCNT 16 +#define EIP197_FW_PUE_READY 0x14 +#define EIP197_FW_FPP_READY 0x18 + enum eip197_fw { FW_IFPP = 0, FW_IPUE, -- 2.7.4