From f679056b2fdd4e9b7c8eb42ba447cd9646236305 Mon Sep 17 00:00:00 2001 From: =?utf8?q?G=C3=A1bor=20Stefanik?= Date: Mon, 10 Aug 2009 21:23:08 +0200 Subject: [PATCH] ssb: Implement the remaining rev.8 SPROM vars needed for LP-PHY MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Also add a "SPEX32" macro for extracting 32-bit SPROM variables. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- drivers/ssb/pci.c | 53 ++++++++++++++++++++++++++++++++++- include/linux/ssb/ssb.h | 44 ++++++++++++++++++++++++----- include/linux/ssb/ssb_regs.h | 66 +++++++++++++++++++++++++++++++++++++++----- 3 files changed, 148 insertions(+), 15 deletions(-) diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 40ea417..593fc61 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -169,8 +169,14 @@ err_pci: /* Get the word-offset for a SSB_SPROM_XXX define. */ #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ -#define SPEX(_outvar, _offset, _mask, _shift) \ +#define SPEX16(_outvar, _offset, _mask, _shift) \ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) +#define SPEX32(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ + in[SPOFF(_offset)]) & (_mask)) >> (_shift)) +#define SPEX(_outvar, _offset, _mask, _shift) \ + SPEX16(_outvar, _offset, _mask, _shift) + static inline u8 ssb_crc8(u8 crc, u8 data) { @@ -480,6 +486,8 @@ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, SSB_SPROM8_ANTAVAIL_A_SHIFT); SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, @@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, SSB_SPROM8_ITSSI_A_SHIFT); + SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); + SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, + SSB_SPROM8_MAXP_AL_SHIFT); SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, SSB_SPROM8_GPIOA_P1_SHIFT); SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, SSB_SPROM8_GPIOB_P3_SHIFT); + SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); + SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, + SSB_SPROM8_TRI5G_SHIFT); + SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); + SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, + SSB_SPROM8_TRI5GH_SHIFT); + SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); + SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, + SSB_SPROM8_RXPO5G_SHIFT); + SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); + SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, + SSB_SPROM8_RSSISMC2G_SHIFT); + SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, + SSB_SPROM8_RSSISAV2G_SHIFT); + SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, + SSB_SPROM8_BXA2G_SHIFT); + SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); + SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, + SSB_SPROM8_RSSISMC5G_SHIFT); + SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, + SSB_SPROM8_RSSISAV5G_SHIFT); + SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, + SSB_SPROM8_BXA5G_SHIFT); + SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); + SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); + SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); + SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); + SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); + SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); + SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); + SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); + SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); + SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); + SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); + SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); + SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); + SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); + SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); + SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 5ae8fa2..17ffc1f 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -27,24 +27,54 @@ struct ssb_sprom { u8 et1mdcport; /* MDIO for enet1 */ u8 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; u16 pa0b1; u16 pa0b2; u16 pa1b0; u16 pa1b1; u16 pa1b2; + u16 pa1lob0; + u16 pa1lob1; + u16 pa1lob2; + u16 pa1hib0; + u16 pa1hib1; + u16 pa1hib2; u8 gpio0; /* GPIO pin 0 */ u8 gpio1; /* GPIO pin 1 */ u8 gpio2; /* GPIO pin 2 */ u8 gpio3; /* GPIO pin 3 */ - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u16 boardflags_lo; /* Boardflags (low 16 bits) */ - u16 boardflags_hi; /* Boardflags (high 16 bits) */ + u8 tri2g; /* 2.4GHz TX isolation */ + u8 tri5gl; /* 5.2GHz TX isolation */ + u8 tri5g; /* 5.3GHz TX isolation */ + u8 tri5gh; /* 5.8GHz TX isolation */ + u8 rxpo2g; /* 2GHz RX power offset */ + u8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; + u8 bxa2g; /* 2GHz BX arch */ + u8 rssisav5g; /* 5GHz RSSI params */ + u8 rssismc5g; + u8 rssismf5g; + u8 bxa5g; /* 5GHz BX arch */ + u16 cck2gpo; /* CCK power offset */ + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ + u16 boardflags_lo; /* Board flags (bits 0-15) */ + u16 boardflags_hi; /* Board flags (bits 16-31) */ + u16 boardflags2_lo; /* Board flags (bits 32-47) */ + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the @@ -58,7 +88,7 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; /* Information about the PCB the circuitry is soldered on. */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index a01b982..9ae9082 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -162,7 +162,7 @@ /* SPROM shadow area. If not otherwise noted, fields are * two bytes wide. Note that the SPROM can _only_ be read - * in two-byte quantinies. + * in two-byte quantities. */ #define SSB_SPROMSIZE_WORDS 64 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) @@ -327,8 +327,11 @@ #define SSB_SPROM5_GPIOB_P3_SHIFT 8 /* SPROM Revision 8 */ -#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ -#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ +#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ +#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ +#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ +#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ +#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ @@ -354,14 +357,63 @@ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM8_GPIOB_P3_SHIFT 8 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ -#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ +#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ +#define SSB_SPROM8_RSSISMF2G 0x000F +#define SSB_SPROM8_RSSISMC2G 0x00F0 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4 +#define SSB_SPROM8_RSSISAV2G 0x0700 +#define SSB_SPROM8_RSSISAV2G_SHIFT 8 +#define SSB_SPROM8_BXA2G 0x1800 +#define SSB_SPROM8_BXA2G_SHIFT 11 +#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ +#define SSB_SPROM8_RSSISMF5G 0x000F +#define SSB_SPROM8_RSSISMC5G 0x00F0 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4 +#define SSB_SPROM8_RSSISAV5G 0x0700 +#define SSB_SPROM8_RSSISAV5G_SHIFT 8 +#define SSB_SPROM8_BXA5G 0x1800 +#define SSB_SPROM8_BXA5G_SHIFT 11 +#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ +#define SSB_SPROM8_TRI5G_SHIFT 8 +#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ +#define SSB_SPROM8_TRI5GH_SHIFT 8 +#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ +#define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ #define SSB_SPROM8_ITSSI_BG_SHIFT 8 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ -#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ +#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ +#define SSB_SPROM8_PA0B1 0x10C4 +#define SSB_SPROM8_PA0B2 0x10C6 +#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ #define SSB_SPROM8_ITSSI_A_SHIFT 8 +#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ +#define SSB_SPROM8_MAXP_AL_SHIFT 8 +#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ +#define SSB_SPROM8_PA1B1 0x10CE +#define SSB_SPROM8_PA1B2 0x10D0 +#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ +#define SSB_SPROM8_PA1LOB1 0x10D4 +#define SSB_SPROM8_PA1LOB2 0x10D6 +#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x10DA +#define SSB_SPROM8_PA1HIB2 0x10DC +#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { -- 2.7.4