From f5f1b06eeaa66f5eb4b030cff63118cea33293fa Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Wed, 1 Jun 2016 17:39:21 +0900 Subject: [PATCH] drm/nouveau/clk/gk20a: setup slide once during init Slide setup needs to be performed only once, during init. Also use the proper parameters for different clock speeds. Signed-off-by: Alexandre Courbot Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.c | 46 +++++++++++++++++++++---- drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.h | 2 ++ drivers/gpu/drm/nouveau/nvkm/subdev/clk/gm20b.c | 4 +++ 3 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.c b/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.c index d633669..166f51c 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.c @@ -274,12 +274,6 @@ gk20a_pllg_slide(struct gk20a_clk *clk, u32 n) if (n == ((val >> GPCPLL_COEFF_N_SHIFT) & MASK(GPCPLL_COEFF_N_WIDTH))) return 0; - /* setup */ - nvkm_mask(device, GPCPLL_CFG2, 0xff << GPCPLL_CFG2_PLL_STEPA_SHIFT, - 0x2b << GPCPLL_CFG2_PLL_STEPA_SHIFT); - nvkm_mask(device, GPCPLL_CFG3, 0xff << GPCPLL_CFG3_PLL_STEPB_SHIFT, - 0xb << GPCPLL_CFG3_PLL_STEPB_SHIFT); - /* pll slowdown mode */ nvkm_mask(device, GPCPLL_NDIV_SLOWDOWN, BIT(GPCPLL_NDIV_SLOWDOWN_SLOWDOWN_USING_PLL_SHIFT), @@ -581,6 +575,42 @@ gk20a_clk_tidy(struct nvkm_clk *base) { } +int +gk20a_clk_setup_slide(struct gk20a_clk *clk) +{ + struct nvkm_subdev *subdev = &clk->base.subdev; + struct nvkm_device *device = subdev->device; + u32 step_a, step_b; + + switch (clk->parent_rate) { + case 12000000: + case 12800000: + case 13000000: + step_a = 0x2b; + step_b = 0x0b; + break; + case 19200000: + step_a = 0x12; + step_b = 0x08; + break; + case 38400000: + step_a = 0x04; + step_b = 0x05; + break; + default: + nvkm_error(subdev, "invalid parent clock rate %u KHz", + clk->parent_rate / KHZ); + return -EINVAL; + } + + nvkm_mask(device, GPCPLL_CFG2, 0xff << GPCPLL_CFG2_PLL_STEPA_SHIFT, + step_a << GPCPLL_CFG2_PLL_STEPA_SHIFT); + nvkm_mask(device, GPCPLL_CFG3, 0xff << GPCPLL_CFG3_PLL_STEPB_SHIFT, + step_b << GPCPLL_CFG3_PLL_STEPB_SHIFT); + + return 0; +} + void gk20a_clk_fini(struct nvkm_clk *base) { @@ -617,6 +647,10 @@ gk20a_clk_init(struct nvkm_clk *base) nvkm_mask(device, GPC2CLK_OUT, GPC2CLK_OUT_INIT_MASK, GPC2CLK_OUT_INIT_VAL); + ret = gk20a_clk_setup_slide(clk); + if (ret) + return ret; + /* Start with lowest frequency */ base->func->calc(base, &base->func->pstates[0].base); ret = base->func->prog(&clk->base); diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.h b/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.h index 13c4674..028c272 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.h +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.h @@ -62,4 +62,6 @@ int gk20a_clk_calc(struct nvkm_clk *, struct nvkm_cstate *); int gk20a_clk_prog(struct nvkm_clk *); void gk20a_clk_tidy(struct nvkm_clk *); +int gk20a_clk_setup_slide(struct gk20a_clk *); + #endif diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gm20b.c b/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gm20b.c index 274a74c..a34acaf 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gm20b.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/clk/gm20b.c @@ -144,6 +144,10 @@ gm20b_clk_init(struct nvkm_clk *base) struct nvkm_device *device = subdev->device; int ret; + ret = gk20a_clk_setup_slide(clk); + if (ret) + return ret; + /* Set the global bypass control to VCO */ nvkm_mask(device, BYPASSCTRL_SYS, MASK(BYPASSCTRL_SYS_GPCPLL_WIDTH) << BYPASSCTRL_SYS_GPCPLL_SHIFT, -- 2.7.4