From f4d86223771533c68f1a6692d499f7ef0025f733 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 23 Aug 2015 22:49:32 +0200 Subject: [PATCH] spi/bcm63xx-hsspi: add support for dual spi read/write Add support for dual read/writes on spi-bcm63xx-hsspi. This has been tested with a s25fl129p1 dual read capable spi flash, with a nice speed improvement: serial read: root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 2032+0 records in 2032+0 records out real 0m 4.39s user 0m 0.00s sys 0m 1.55s dual read: root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 2032+0 records in 2032+0 records out real 0m 3.09s user 0m 0.00s sys 0m 1.56s Signed-off-by: Jonas Gorski Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx-hsspi.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c index f5ca6dc..55789f7 100644 --- a/drivers/spi/spi-bcm63xx-hsspi.c +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -76,6 +76,7 @@ #define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200) +#define HSSPI_OP_MULTIBIT BIT(11) #define HSSPI_OP_CODE_SHIFT 13 #define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT) #define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT) @@ -171,9 +172,12 @@ static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t) if (opcode != HSSPI_OP_READ) step_size -= HSSPI_OPCODE_LEN; - __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT | - 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT | - 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff, + if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) || + (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL)) + opcode |= HSSPI_OP_MULTIBIT; + + __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT | + 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff, bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select)); while (pending > 0) { @@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) master->num_chipselect = 8; master->setup = bcm63xx_hsspi_setup; master->transfer_one_message = bcm63xx_hsspi_transfer_one; - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | + SPI_RX_DUAL | SPI_TX_DUAL; master->bits_per_word_mask = SPI_BPW_MASK(8); master->auto_runtime_pm = true; -- 2.7.4