From f13200bb63748918c63ac6a4c8ea554803359343 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Thu, 30 Jan 2020 15:52:40 +0900 Subject: [PATCH] dt-bindings: phy: socionext: Add Pro5 support and remove Pro4 from usb3-hsphy This adds compatible string for Pro5 SoC that needs to manage gio clock and reset. And Pro4 SoC uses USB2 PHY instead of USB3 HS-PHY, so this removes Pro4 description from usb3-hsphy. Signed-off-by: Kunihiko Hayashi Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt | 13 +++++++++---- .../devicetree/bindings/phy/uniphier-usb3-hsphy.txt | 6 +++--- .../devicetree/bindings/phy/uniphier-usb3-ssphy.txt | 5 +++-- 3 files changed, 15 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt index 1889d3b..3cee372 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt @@ -5,14 +5,19 @@ PCIe controller implemented on Socionext UniPhier SoCs. Required properties: - compatible: Should contain one of the following: + "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY - reg: Specifies offset and length of the register set for the device. - #phy-cells: Must be zero. -- clocks: A phandle to the clock gate for PCIe glue layer including - this phy. -- resets: A phandle to the reset line for PCIe glue layer including - this phy. +- clocks: A list of phandles to the clock gate for PCIe glue layer + including this phy. +- clock-names: For Pro5 only, should contain the following: + "gio", "link" - for Pro5 SoC +- resets: A list of phandles to the reset line for PCIe glue layer + including this phy. +- reset-names: For Pro5 only, should contain the following: + "gio", "link" - for Pro5 SoC Optional properties: - socionext,syscon: A phandle to system control to set configurations diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt index e8d8086..093d4f0 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt @@ -7,7 +7,7 @@ this describes about High-Speed PHY. Required properties: - compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-hsphy" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC @@ -16,13 +16,13 @@ Required properties: - clocks: A list of phandles to the clock gate for USB3 glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain the following: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro5 SoC "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. "phy", "link" - for others - resets: A list of phandles to the reset control for USB3 glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain the following: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro5 SoC "phy", "link" - for others Optional properties: diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt index 490b815..9df2bc2 100644 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt +++ b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt @@ -8,6 +8,7 @@ this describes about Super-Speed PHY. Required properties: - compatible: Should contain one of the following: "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC + "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC @@ -16,13 +17,13 @@ Required properties: - clocks: A list of phandles to the clock gate for USB3 glue layer. According to the clock-names, appropriate clocks are required. - clock-names: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoC "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. "phy", "link" - for others - resets: A list of phandles to the reset control for USB3 glue layer. According to the reset-names, appropriate resets are required. - reset-names: - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoC "phy", "link" - for others Optional properties: -- 2.7.4