From f1266c4eba8a5d852259d1c415c39dfa475b05d2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 26 Mar 2022 12:14:55 -0300 Subject: [PATCH] ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue [ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ] On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec on the SoM is often not detected and the following error message is seen when the sgtl5000 driver tries to read the ID register: sgtl5000 1-000a: Error reading chip id -6 The reason for the error is that the MCLK clock is not provided early enough. Fix the problem by describing the MCLK pinctrl inside the codec node instead of placing it inside the audmux pinctrl group. With this change applied the sgtl5000 is always detected on every boot. Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM") Signed-off-by: Fabio Estevam Reviewed-by: Tim Harvey Acked-by: Max Krummenacher Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 30fa349..a696873 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -286,6 +286,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -516,8 +518,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -810,6 +810,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 -- 2.7.4