From eea9b97b4504607a0805c71b20d2c3e93c8711a7 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 8 Mar 2019 09:43:36 -0800 Subject: [PATCH] drm/v3d: Add support for V3D v4.2. No compatible string for it yet, just the version-dependent changes. They've now tied the hub and the core interrupt lines into a single interrupt line coming out of the block. It also turns out I made a mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D itself -- the bridge is going away in favor of an external reset controller in a larger HW module. v2: Use consistent checks for whether we're on 4.2, and fix a leak in an error path. v3: Use more general means of determining if the current 4.2 changes are in place, as apparently other platforms may switch back (noted by Dave). Update the binding doc. v4: Improve error handling for IRQ init. Signed-off-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-2-eric@anholt.net Reviewed-by: Dave Emett --- .../devicetree/bindings/gpu/brcm,bcm-v3d.txt | 11 ++++-- drivers/gpu/drm/v3d/v3d_drv.c | 21 ++++++++-- drivers/gpu/drm/v3d/v3d_drv.h | 2 + drivers/gpu/drm/v3d/v3d_gem.c | 12 +++++- drivers/gpu/drm/v3d/v3d_irq.c | 45 ++++++++++++++++------ 5 files changed, 71 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt index c907aa8..b2df82b 100644 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt @@ -6,15 +6,20 @@ For V3D 2.x, see brcm,bcm-vc4.txt. Required properties: - compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" - reg: Physical base addresses and lengths of the register areas -- reg-names: Names for the register areas. The "hub", "bridge", and "core0" +- reg-names: Names for the register areas. The "hub" and "core0" register areas are always required. The "gca" register area - is required if the GCA cache controller is present. + is required if the GCA cache controller is present. The + "bridge" register area is required if an external reset + controller is not present. - interrupts: The interrupt numbers. The first interrupt is for the hub, - while the following interrupts are for the cores. + while the following interrupts are separate interrupt lines + for the cores (if they don't share the hub's interrupt). See bindings/interrupt-controller/interrupts.txt Optional properties: - clocks: The core clock the unit runs on +- resets: The reset line for v3d, if not using a mapping of the bridge + See bindings/reset/reset.txt v3d { compatible = "brcm,7268-v3d"; diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c index f9906ca..89b7567 100644 --- a/drivers/gpu/drm/v3d/v3d_drv.c +++ b/drivers/gpu/drm/v3d/v3d_drv.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -264,10 +265,6 @@ static int v3d_platform_drm_probe(struct platform_device *pdev) v3d->pdev = pdev; drm = &v3d->drm; - ret = map_regs(v3d, &v3d->bridge_regs, "bridge"); - if (ret) - goto dev_free; - ret = map_regs(v3d, &v3d->hub_regs, "hub"); if (ret) goto dev_free; @@ -282,6 +279,22 @@ static int v3d_platform_drm_probe(struct platform_device *pdev) v3d->cores = V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_NCORES); WARN_ON(v3d->cores > 1); /* multicore not yet implemented */ + v3d->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(v3d->reset)) { + ret = PTR_ERR(v3d->reset); + + if (ret == -EPROBE_DEFER) + goto dev_free; + + v3d->reset = NULL; + ret = map_regs(v3d, &v3d->bridge_regs, "bridge"); + if (ret) { + dev_err(dev, + "Failed to get reset control or bridge regs\n"); + goto dev_free; + } + } + if (v3d->ver < 41) { ret = map_regs(v3d, &v3d->gca_regs, "gca"); if (ret) diff --git a/drivers/gpu/drm/v3d/v3d_drv.h b/drivers/gpu/drm/v3d/v3d_drv.h index bb58ecb..b5efac7 100644 --- a/drivers/gpu/drm/v3d/v3d_drv.h +++ b/drivers/gpu/drm/v3d/v3d_drv.h @@ -33,6 +33,7 @@ struct v3d_dev { * and revision. */ int ver; + bool single_irq_line; struct device *dev; struct platform_device *pdev; @@ -41,6 +42,7 @@ struct v3d_dev { void __iomem *bridge_regs; void __iomem *gca_regs; struct clk *clk; + struct reset_control *reset; /* Virtual and DMA addresses of the single shared page table. */ volatile u32 *pt; diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c index 0a83268..449d01e 100644 --- a/drivers/gpu/drm/v3d/v3d_gem.c +++ b/drivers/gpu/drm/v3d/v3d_gem.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -70,7 +71,7 @@ v3d_idle_gca(struct v3d_dev *v3d) } static void -v3d_reset_v3d(struct v3d_dev *v3d) +v3d_reset_by_bridge(struct v3d_dev *v3d) { int version = V3D_BRIDGE_READ(V3D_TOP_GR_BRIDGE_REVISION); @@ -90,6 +91,15 @@ v3d_reset_v3d(struct v3d_dev *v3d) V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT); V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_1, 0); } +} + +static void +v3d_reset_v3d(struct v3d_dev *v3d) +{ + if (v3d->reset) + reset_control_reset(v3d->reset); + else + v3d_reset_by_bridge(v3d); v3d_init_hw_state(v3d); } diff --git a/drivers/gpu/drm/v3d/v3d_irq.c b/drivers/gpu/drm/v3d/v3d_irq.c index 29d746c..b8aea2d 100644 --- a/drivers/gpu/drm/v3d/v3d_irq.c +++ b/drivers/gpu/drm/v3d/v3d_irq.c @@ -27,6 +27,9 @@ V3D_HUB_INT_MMU_CAP | \ V3D_HUB_INT_TFUC)) +static irqreturn_t +v3d_hub_irq(int irq, void *arg); + static void v3d_overflow_mem_work(struct work_struct *work) { @@ -112,6 +115,12 @@ v3d_irq(int irq, void *arg) if (intsts & V3D_INT_GMPV) dev_err(v3d->dev, "GMP violation\n"); + /* V3D 4.2 wires the hub and core IRQs together, so if we & + * didn't see the common one then check hub for MMU IRQs. + */ + if (v3d->single_irq_line && status == IRQ_NONE) + return v3d_hub_irq(irq, arg); + return status; } @@ -159,7 +168,7 @@ v3d_hub_irq(int irq, void *arg) int v3d_irq_init(struct v3d_dev *v3d) { - int ret, core; + int irq1, ret, core; INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work); @@ -170,17 +179,29 @@ v3d_irq_init(struct v3d_dev *v3d) V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS); V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS); - ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), - v3d_hub_irq, IRQF_SHARED, - "v3d_hub", v3d); - if (ret) - goto fail; - - ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1), - v3d_irq, IRQF_SHARED, - "v3d_core0", v3d); - if (ret) - goto fail; + irq1 = platform_get_irq(v3d->pdev, 1); + if (irq1 == -EPROBE_DEFER) + return irq1; + if (irq1 > 0) { + ret = devm_request_irq(v3d->dev, irq1, + v3d_irq, IRQF_SHARED, + "v3d_core0", v3d); + if (ret) + goto fail; + ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), + v3d_hub_irq, IRQF_SHARED, + "v3d_hub", v3d); + if (ret) + goto fail; + } else { + v3d->single_irq_line = true; + + ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0), + v3d_irq, IRQF_SHARED, + "v3d", v3d); + if (ret) + goto fail; + } v3d_irq_enable(v3d); return 0; -- 2.7.4