From edf62cdf8ab08e6949db589b331c7610cd984b90 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Fri, 3 Dec 2010 16:17:28 +0100 Subject: [PATCH] usb: add ehci adapter This patch finally merges the EHCI host adapter aka USB 2.0 support. Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci EHCI has a long out-of-tree history. Project was started by Mark Burkley, with contributions by Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed bugfixes. /me (Gerd Hoffmann) picked it up where it left off, prepared the code for merge, fixed a few bugs and added basic user docs. Cc: David S. Ahern Cc: Jan Kiszka Cc: Kevin Wolf Cc: Vincent Palatin Signed-off-by: Gerd Hoffmann --- Makefile.objs | 1 + default-configs/pci.mak | 1 + docs/usb2.txt | 38 + hw/pci_ids.h | 1 + hw/usb-ehci.c | 2037 +++++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 2078 insertions(+) create mode 100644 docs/usb2.txt create mode 100644 hw/usb-ehci.c diff --git a/Makefile.objs b/Makefile.objs index 4478c61..90838f6 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -193,6 +193,7 @@ hw-obj-$(CONFIG_PCSPK) += pcspk.o hw-obj-$(CONFIG_PCKBD) += pckbd.o hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o +hw-obj-$(CONFIG_USB_EHCI) += usb-ehci.o hw-obj-$(CONFIG_FDC) += fdc.o hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o diff --git a/default-configs/pci.mak b/default-configs/pci.mak index 0471efb..22bd350 100644 --- a/default-configs/pci.mak +++ b/default-configs/pci.mak @@ -3,6 +3,7 @@ CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO=y CONFIG_USB_UHCI=y CONFIG_USB_OHCI=y +CONFIG_USB_EHCI=y CONFIG_NE2000_PCI=y CONFIG_EEPRO100_PCI=y CONFIG_PCNET_PCI=y diff --git a/docs/usb2.txt b/docs/usb2.txt new file mode 100644 index 0000000..b283c13 --- /dev/null +++ b/docs/usb2.txt @@ -0,0 +1,38 @@ + +USB 2.0 Quick Start +=================== + +The QEMU EHCI Adapter does *not* support companion controllers. That +implies there are two completely separate USB busses: One USB 1.1 bus +driven by the UHCI controller and one USB 2.0 bus driven by the EHCI +controller. Devices must be attached to the correct controller +manually. + +The '-usb' switch will make qemu create the UHCI controller as part of +the PIIX3 chipset. The USB 1.1 bus will carry the name "usb.0". + +You can use the standard -device switch to add a EHCI controller to +your virtual machine. It is strongly recommended to specify an ID for +the controller so the USB 2.0 bus gets a individual name, for example +'-device usb-ehci,id=ehci". This will give you a USB 2.0 bus named +"ehci.0". + +I strongly recomment to also use -device to attach usb devices because +you can specify the bus they should be attached to this way. Here is +a complete example: + + qemu -M pc ${otheroptions} \ + -drive if=none,id=usbstick,file=/path/to/image \ + -usb \ + -device usb-ehci,id=ehci \ + -device usb-tablet,bus=usb.0 \ + -device usb-storage,bus=ehci.0,drive=usbstick + +This attaches a usb tablet to the UHCI adapter and a usb mass storage +device to the EHCI adapter. + +enjoy, + Gerd + +-- +Gerd Hoffmann diff --git a/hw/pci_ids.h b/hw/pci_ids.h index ea3418c..d9457ed 100644 --- a/hw/pci_ids.h +++ b/hw/pci_ids.h @@ -100,6 +100,7 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_82441 0x1237 #define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415 +#define PCI_DEVICE_ID_INTEL_82801D 0x24CD #define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab #define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 #define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 diff --git a/hw/usb-ehci.c b/hw/usb-ehci.c new file mode 100644 index 0000000..f63519e --- /dev/null +++ b/hw/usb-ehci.c @@ -0,0 +1,2037 @@ +/* + * QEMU USB EHCI Emulation + * + * Copyright(c) 2008 Emutex Ltd. (address@hidden) + * + * EHCI project was started by Mark Burkley, with contributions by + * Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, + * Jan Kiszka and Vincent Palatin contributed bugfixes. + * + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or(at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * + * TODO: + * o Downstream port handoff + */ + +#include "hw.h" +#include "qemu-timer.h" +#include "usb.h" +#include "pci.h" +#include "monitor.h" + +#define EHCI_DEBUG 0 +#define STATE_DEBUG 0 /* state transitions */ + +#if EHCI_DEBUG || STATE_DEBUG +#define DPRINTF printf +#else +#define DPRINTF(...) +#endif + +#if STATE_DEBUG +#define DPRINTF_ST DPRINTF +#else +#define DPRINTF_ST(...) +#endif + +/* internal processing - reset HC to try and recover */ +#define USB_RET_PROCERR (-99) + +#define MMIO_SIZE 0x1000 + +/* Capability Registers Base Address - section 2.2 */ +#define CAPREGBASE 0x0000 +#define CAPLENGTH CAPREGBASE + 0x0000 // 1-byte, 0x0001 reserved +#define HCIVERSION CAPREGBASE + 0x0002 // 2-bytes, i/f version # +#define HCSPARAMS CAPREGBASE + 0x0004 // 4-bytes, structural params +#define HCCPARAMS CAPREGBASE + 0x0008 // 4-bytes, capability params +#define EECP HCCPARAMS + 1 +#define HCSPPORTROUTE1 CAPREGBASE + 0x000c +#define HCSPPORTROUTE2 CAPREGBASE + 0x0010 + +#define OPREGBASE 0x0020 // Operational Registers Base Address + +#define USBCMD OPREGBASE + 0x0000 +#define USBCMD_RUNSTOP (1 << 0) // run / Stop +#define USBCMD_HCRESET (1 << 1) // HC Reset +#define USBCMD_FLS (3 << 2) // Frame List Size +#define USBCMD_FLS_SH 2 // Frame List Size Shift +#define USBCMD_PSE (1 << 4) // Periodic Schedule Enable +#define USBCMD_ASE (1 << 5) // Asynch Schedule Enable +#define USBCMD_IAAD (1 << 6) // Int Asynch Advance Doorbell +#define USBCMD_LHCR (1 << 7) // Light Host Controller Reset +#define USBCMD_ASPMC (3 << 8) // Async Sched Park Mode Count +#define USBCMD_ASPME (1 << 11) // Async Sched Park Mode Enable +#define USBCMD_ITC (0x7f << 16) // Int Threshold Control +#define USBCMD_ITC_SH 16 // Int Threshold Control Shift + +#define USBSTS OPREGBASE + 0x0004 +#define USBSTS_RO_MASK 0x0000003f +#define USBSTS_INT (1 << 0) // USB Interrupt +#define USBSTS_ERRINT (1 << 1) // Error Interrupt +#define USBSTS_PCD (1 << 2) // Port Change Detect +#define USBSTS_FLR (1 << 3) // Frame List Rollover +#define USBSTS_HSE (1 << 4) // Host System Error +#define USBSTS_IAA (1 << 5) // Interrupt on Async Advance +#define USBSTS_HALT (1 << 12) // HC Halted +#define USBSTS_REC (1 << 13) // Reclamation +#define USBSTS_PSS (1 << 14) // Periodic Schedule Status +#define USBSTS_ASS (1 << 15) // Asynchronous Schedule Status + +/* + * Interrupt enable bits correspond to the interrupt active bits in USBSTS + * so no need to redefine here. + */ +#define USBINTR OPREGBASE + 0x0008 +#define USBINTR_MASK 0x0000003f + +#define FRINDEX OPREGBASE + 0x000c +#define CTRLDSSEGMENT OPREGBASE + 0x0010 +#define PERIODICLISTBASE OPREGBASE + 0x0014 +#define ASYNCLISTADDR OPREGBASE + 0x0018 +#define ASYNCLISTADDR_MASK 0xffffffe0 + +#define CONFIGFLAG OPREGBASE + 0x0040 + +#define PORTSC (OPREGBASE + 0x0044) +#define PORTSC_BEGIN PORTSC +#define PORTSC_END (PORTSC + 4 * NB_PORTS) +/* + * Bits that are reserverd or are read-only are masked out of values + * written to us by software + */ +#define PORTSC_RO_MASK 0x007021c5 +#define PORTSC_RWC_MASK 0x0000002a +#define PORTSC_WKOC_E (1 << 22) // Wake on Over Current Enable +#define PORTSC_WKDS_E (1 << 21) // Wake on Disconnect Enable +#define PORTSC_WKCN_E (1 << 20) // Wake on Connect Enable +#define PORTSC_PTC (15 << 16) // Port Test Control +#define PORTSC_PTC_SH 16 // Port Test Control shift +#define PORTSC_PIC (3 << 14) // Port Indicator Control +#define PORTSC_PIC_SH 14 // Port Indicator Control Shift +#define PORTSC_POWNER (1 << 13) // Port Owner +#define PORTSC_PPOWER (1 << 12) // Port Power +#define PORTSC_LINESTAT (3 << 10) // Port Line Status +#define PORTSC_LINESTAT_SH 10 // Port Line Status Shift +#define PORTSC_PRESET (1 << 8) // Port Reset +#define PORTSC_SUSPEND (1 << 7) // Port Suspend +#define PORTSC_FPRES (1 << 6) // Force Port Resume +#define PORTSC_OCC (1 << 5) // Over Current Change +#define PORTSC_OCA (1 << 4) // Over Current Active +#define PORTSC_PEDC (1 << 3) // Port Enable/Disable Change +#define PORTSC_PED (1 << 2) // Port Enable/Disable +#define PORTSC_CSC (1 << 1) // Connect Status Change +#define PORTSC_CONNECT (1 << 0) // Current Connect Status + +#define FRAME_TIMER_FREQ 1000 +#define FRAME_TIMER_USEC (1000000 / FRAME_TIMER_FREQ) + +#define NB_MAXINTRATE 8 // Max rate at which controller issues ints +#define NB_PORTS 4 // Number of downstream ports +#define BUFF_SIZE 5*4096 // Max bytes to transfer per transaction +#define MAX_ITERATIONS 20 // Max number of QH before we break the loop +#define MAX_QH 100 // Max allowable queue heads in a chain + +/* Internal periodic / asynchronous schedule state machine states + */ +typedef enum { + EST_INACTIVE = 1000, + EST_ACTIVE, + EST_EXECUTING, + EST_SLEEPING, + /* The following states are internal to the state machine function + */ + EST_WAITLISTHEAD, + EST_FETCHENTRY, + EST_FETCHQH, + EST_FETCHITD, + EST_ADVANCEQUEUE, + EST_FETCHQTD, + EST_EXECUTE, + EST_WRITEBACK, + EST_HORIZONTALQH +} EHCI_STATES; + +/* macros for accessing fields within next link pointer entry */ +#define NLPTR_GET(x) ((x) & 0xffffffe0) +#define NLPTR_TYPE_GET(x) (((x) >> 1) & 3) +#define NLPTR_TBIT(x) ((x) & 1) // 1=invalid, 0=valid + +/* link pointer types */ +#define NLPTR_TYPE_ITD 0 // isoc xfer descriptor +#define NLPTR_TYPE_QH 1 // queue head +#define NLPTR_TYPE_STITD 2 // split xaction, isoc xfer descriptor +#define NLPTR_TYPE_FSTN 3 // frame span traversal node + + +/* EHCI spec version 1.0 Section 3.3 + */ +typedef struct EHCIitd { + uint32_t next; + + uint32_t transact[8]; +#define ITD_XACT_ACTIVE (1 << 31) +#define ITD_XACT_DBERROR (1 << 30) +#define ITD_XACT_BABBLE (1 << 29) +#define ITD_XACT_XACTERR (1 << 28) +#define ITD_XACT_LENGTH_MASK 0x0fff0000 +#define ITD_XACT_LENGTH_SH 16 +#define ITD_XACT_IOC (1 << 15) +#define ITD_XACT_PGSEL_MASK 0x00007000 +#define ITD_XACT_PGSEL_SH 12 +#define ITD_XACT_OFFSET_MASK 0x00000fff + + uint32_t bufptr[7]; +#define ITD_BUFPTR_MASK 0xfffff000 +#define ITD_BUFPTR_SH 12 +#define ITD_BUFPTR_EP_MASK 0x00000f00 +#define ITD_BUFPTR_EP_SH 8 +#define ITD_BUFPTR_DEVADDR_MASK 0x0000007f +#define ITD_BUFPTR_DEVADDR_SH 0 +#define ITD_BUFPTR_DIRECTION (1 << 11) +#define ITD_BUFPTR_MAXPKT_MASK 0x000007ff +#define ITD_BUFPTR_MAXPKT_SH 0 +#define ITD_BUFPTR_MULT_MASK 0x00000003 +} EHCIitd; + +/* EHCI spec version 1.0 Section 3.4 + */ +typedef struct EHCIsitd { + uint32_t next; // Standard next link pointer + uint32_t epchar; +#define SITD_EPCHAR_IO (1 << 31) +#define SITD_EPCHAR_PORTNUM_MASK 0x7f000000 +#define SITD_EPCHAR_PORTNUM_SH 24 +#define SITD_EPCHAR_HUBADD_MASK 0x007f0000 +#define SITD_EPCHAR_HUBADDR_SH 16 +#define SITD_EPCHAR_EPNUM_MASK 0x00000f00 +#define SITD_EPCHAR_EPNUM_SH 8 +#define SITD_EPCHAR_DEVADDR_MASK 0x0000007f + + uint32_t uframe; +#define SITD_UFRAME_CMASK_MASK 0x0000ff00 +#define SITD_UFRAME_CMASK_SH 8 +#define SITD_UFRAME_SMASK_MASK 0x000000ff + + uint32_t results; +#define SITD_RESULTS_IOC (1 << 31) +#define SITD_RESULTS_PGSEL (1 << 30) +#define SITD_RESULTS_TBYTES_MASK 0x03ff0000 +#define SITD_RESULTS_TYBYTES_SH 16 +#define SITD_RESULTS_CPROGMASK_MASK 0x0000ff00 +#define SITD_RESULTS_CPROGMASK_SH 8 +#define SITD_RESULTS_ACTIVE (1 << 7) +#define SITD_RESULTS_ERR (1 << 6) +#define SITD_RESULTS_DBERR (1 << 5) +#define SITD_RESULTS_BABBLE (1 << 4) +#define SITD_RESULTS_XACTERR (1 << 3) +#define SITD_RESULTS_MISSEDUF (1 << 2) +#define SITD_RESULTS_SPLITXSTATE (1 << 1) + + uint32_t bufptr[2]; +#define SITD_BUFPTR_MASK 0xfffff000 +#define SITD_BUFPTR_CURROFF_MASK 0x00000fff +#define SITD_BUFPTR_TPOS_MASK 0x00000018 +#define SITD_BUFPTR_TPOS_SH 3 +#define SITD_BUFPTR_TCNT_MASK 0x00000007 + + uint32_t backptr; // Standard next link pointer +} EHCIsitd; + +/* EHCI spec version 1.0 Section 3.5 + */ +typedef struct EHCIqtd { + uint32_t next; // Standard next link pointer + uint32_t altnext; // Standard next link pointer + uint32_t token; +#define QTD_TOKEN_DTOGGLE (1 << 31) +#define QTD_TOKEN_TBYTES_MASK 0x7fff0000 +#define QTD_TOKEN_TBYTES_SH 16 +#define QTD_TOKEN_IOC (1 << 15) +#define QTD_TOKEN_CPAGE_MASK 0x00007000 +#define QTD_TOKEN_CPAGE_SH 12 +#define QTD_TOKEN_CERR_MASK 0x00000c00 +#define QTD_TOKEN_CERR_SH 10 +#define QTD_TOKEN_PID_MASK 0x00000300 +#define QTD_TOKEN_PID_SH 8 +#define QTD_TOKEN_ACTIVE (1 << 7) +#define QTD_TOKEN_HALT (1 << 6) +#define QTD_TOKEN_DBERR (1 << 5) +#define QTD_TOKEN_BABBLE (1 << 4) +#define QTD_TOKEN_XACTERR (1 << 3) +#define QTD_TOKEN_MISSEDUF (1 << 2) +#define QTD_TOKEN_SPLITXSTATE (1 << 1) +#define QTD_TOKEN_PING (1 << 0) + + uint32_t bufptr[5]; // Standard buffer pointer +#define QTD_BUFPTR_MASK 0xfffff000 +} EHCIqtd; + +/* EHCI spec version 1.0 Section 3.6 + */ +typedef struct EHCIqh { + uint32_t next; // Standard next link pointer + + /* endpoint characteristics */ + uint32_t epchar; +#define QH_EPCHAR_RL_MASK 0xf0000000 +#define QH_EPCHAR_RL_SH 28 +#define QH_EPCHAR_C (1 << 27) +#define QH_EPCHAR_MPLEN_MASK 0x07FF0000 +#define QH_EPCHAR_MPLEN_SH 16 +#define QH_EPCHAR_H (1 << 15) +#define QH_EPCHAR_DTC (1 << 14) +#define QH_EPCHAR_EPS_MASK 0x00003000 +#define QH_EPCHAR_EPS_SH 12 +#define EHCI_QH_EPS_FULL 0 +#define EHCI_QH_EPS_LOW 1 +#define EHCI_QH_EPS_HIGH 2 +#define EHCI_QH_EPS_RESERVED 3 + +#define QH_EPCHAR_EP_MASK 0x00000f00 +#define QH_EPCHAR_EP_SH 8 +#define QH_EPCHAR_I (1 << 7) +#define QH_EPCHAR_DEVADDR_MASK 0x0000007f +#define QH_EPCHAR_DEVADDR_SH 0 + + /* endpoint capabilities */ + uint32_t epcap; +#define QH_EPCAP_MULT_MASK 0xc0000000 +#define QH_EPCAP_MULT_SH 30 +#define QH_EPCAP_PORTNUM_MASK 0x3f800000 +#define QH_EPCAP_PORTNUM_SH 23 +#define QH_EPCAP_HUBADDR_MASK 0x007f0000 +#define QH_EPCAP_HUBADDR_SH 16 +#define QH_EPCAP_CMASK_MASK 0x0000ff00 +#define QH_EPCAP_CMASK_SH 8 +#define QH_EPCAP_SMASK_MASK 0x000000ff +#define QH_EPCAP_SMASK_SH 0 + + uint32_t current_qtd; // Standard next link pointer + uint32_t next_qtd; // Standard next link pointer + uint32_t altnext_qtd; +#define QH_ALTNEXT_NAKCNT_MASK 0x0000001e +#define QH_ALTNEXT_NAKCNT_SH 1 + + uint32_t token; // Same as QTD token + uint32_t bufptr[5]; // Standard buffer pointer +#define BUFPTR_CPROGMASK_MASK 0x000000ff +#define BUFPTR_FRAMETAG_MASK 0x0000001f +#define BUFPTR_SBYTES_MASK 0x00000fe0 +#define BUFPTR_SBYTES_SH 5 +} EHCIqh; + +/* EHCI spec version 1.0 Section 3.7 + */ +typedef struct EHCIfstn { + uint32_t next; // Standard next link pointer + uint32_t backptr; // Standard next link pointer +} EHCIfstn; + +typedef struct { + PCIDevice dev; + qemu_irq irq; + target_phys_addr_t mem_base; + int mem; + int num_ports; + /* + * EHCI spec version 1.0 Section 2.3 + * Host Controller Operational Registers + */ + union { + uint8_t mmio[MMIO_SIZE]; + struct { + uint8_t cap[OPREGBASE]; + uint32_t usbcmd; + uint32_t usbsts; + uint32_t usbintr; + uint32_t frindex; + uint32_t ctrldssegment; + uint32_t periodiclistbase; + uint32_t asynclistaddr; + uint32_t notused[9]; + uint32_t configflag; + uint32_t portsc[NB_PORTS]; + }; + }; + /* + * Internal states, shadow registers, etc + */ + uint32_t sofv; + QEMUTimer *frame_timer; + int attach_poll_counter; + int astate; // Current state in asynchronous schedule + int pstate; // Current state in periodic schedule + USBPort ports[NB_PORTS]; + uint8_t buffer[BUFF_SIZE]; + uint32_t usbsts_pending; + + /* cached data from guest - needs to be flushed + * when guest removes an entry (doorbell, handshake sequence) + */ + EHCIqh qh; // copy of current QH (being worked on) + uint32_t qhaddr; // address QH read from + + EHCIqtd qtd; // copy of current QTD (being worked on) + uint32_t qtdaddr; // address QTD read from + + uint32_t itdaddr; // current ITD + + uint32_t fetch_addr; // which address to look at next + + USBBus bus; + USBPacket usb_packet; + int async_complete; + uint32_t tbytes; + int pid; + int exec_status; + int isoch_pause; + uint32_t last_run_usec; + uint32_t frame_end_usec; +} EHCIState; + +#define SET_LAST_RUN_CLOCK(s) \ + (s)->last_run_usec = qemu_get_clock_ns(vm_clock) / 1000; + +/* nifty macros from Arnon's EHCI version */ +#define get_field(data, field) \ + (((data) & field##_MASK) >> field##_SH) + +#define set_field(data, newval, field) do { \ + uint32_t val = *data; \ + val &= ~ field##_MASK; \ + val |= ((newval) << field##_SH) & field##_MASK; \ + *data = val; \ + } while(0) + + +#if EHCI_DEBUG +static const char *addr2str(unsigned addr) +{ + const char *r = " unknown"; + const char *n[] = { + [ CAPLENGTH ] = " CAPLENGTH", + [ HCIVERSION ] = "HCIVERSION", + [ HCSPARAMS ] = " HCSPARAMS", + [ HCCPARAMS ] = " HCCPARAMS", + [ USBCMD ] = " COMMAND", + [ USBSTS ] = " STATUS", + [ USBINTR ] = " INTERRUPT", + [ FRINDEX ] = " FRAME IDX", + [ PERIODICLISTBASE ] = "P-LIST BASE", + [ ASYNCLISTADDR ] = "A-LIST ADDR", + [ PORTSC_BEGIN ... + PORTSC_END ] = "PORT STATUS", + [ CONFIGFLAG ] = "CONFIG FLAG", + }; + + if (addr < ARRAY_SIZE(n) && n[addr] != NULL) { + return n[addr]; + } else { + return r; + } +} +#endif + + +static inline void ehci_set_interrupt(EHCIState *s, int intr) +{ + int level = 0; + + // TODO honour interrupt threshold requests + + s->usbsts |= intr; + + if ((s->usbsts & USBINTR_MASK) & s->usbintr) { + level = 1; + } + + qemu_set_irq(s->irq, level); +} + +static inline void ehci_record_interrupt(EHCIState *s, int intr) +{ + s->usbsts_pending |= intr; +} + +static inline void ehci_commit_interrupt(EHCIState *s) +{ + if (!s->usbsts_pending) { + return; + } + ehci_set_interrupt(s, s->usbsts_pending); + s->usbsts_pending = 0; +} + +/* Attach or detach a device on root hub */ + +static void ehci_attach(USBPort *port) +{ + EHCIState *s = port->opaque; + uint32_t *portsc = &s->portsc[port->index]; + + DPRINTF("ehci_attach invoked for index %d, portsc 0x%x, desc %s\n", + port->index, *portsc, port->dev->product_desc); + + *portsc |= PORTSC_CONNECT; + *portsc |= PORTSC_CSC; + + /* + * If a high speed device is attached then we own this port(indicated + * by zero in the PORTSC_POWNER bit field) so set the status bit + * and set an interrupt if enabled. + */ + if ( !(*portsc & PORTSC_POWNER)) { + ehci_set_interrupt(s, USBSTS_PCD); + } +} + +static void ehci_detach(USBPort *port) +{ + EHCIState *s = port->opaque; + uint32_t *portsc = &s->portsc[port->index]; + + DPRINTF("ehci_attach invoked for index %d, portsc 0x%x\n", + port->index, *portsc); + + *portsc &= ~PORTSC_CONNECT; + *portsc |= PORTSC_CSC; + + /* + * If a high speed device is attached then we own this port(indicated + * by zero in the PORTSC_POWNER bit field) so set the status bit + * and set an interrupt if enabled. + */ + if ( !(*portsc & PORTSC_POWNER)) { + ehci_set_interrupt(s, USBSTS_PCD); + } +} + +/* 4.1 host controller initialization */ +static void ehci_reset(void *opaque) +{ + EHCIState *s = opaque; + uint8_t *pci_conf; + int i; + + pci_conf = s->dev.config; + + memset(&s->mmio[OPREGBASE], 0x00, MMIO_SIZE - OPREGBASE); + + s->usbcmd = NB_MAXINTRATE << USBCMD_ITC_SH; + s->usbsts = USBSTS_HALT; + + s->astate = EST_INACTIVE; + s->pstate = EST_INACTIVE; + s->async_complete = 0; + s->isoch_pause = -1; + s->attach_poll_counter = 0; + + for(i = 0; i < NB_PORTS; i++) { + s->portsc[i] = PORTSC_POWNER | PORTSC_PPOWER; + + if (s->ports[i].dev) { + usb_attach(&s->ports[i], s->ports[i].dev); + } + } +} + +static uint32_t ehci_mem_readb(void *ptr, target_phys_addr_t addr) +{ + EHCIState *s = ptr; + uint32_t val; + + val = s->mmio[addr]; + + return val; +} + +static uint32_t ehci_mem_readw(void *ptr, target_phys_addr_t addr) +{ + EHCIState *s = ptr; + uint32_t val; + + val = s->mmio[addr] | (s->mmio[addr+1] << 8); + + return val; +} + +static uint32_t ehci_mem_readl(void *ptr, target_phys_addr_t addr) +{ + EHCIState *s = ptr; + uint32_t val; + + val = s->mmio[addr] | (s->mmio[addr+1] << 8) | + (s->mmio[addr+2] << 16) | (s->mmio[addr+3] << 24); + + return val; +} + +static void ehci_mem_writeb(void *ptr, target_phys_addr_t addr, uint32_t val) +{ + fprintf(stderr, "EHCI doesn't handle byte writes to MMIO\n"); + exit(1); +} + +static void ehci_mem_writew(void *ptr, target_phys_addr_t addr, uint32_t val) +{ + fprintf(stderr, "EHCI doesn't handle 16-bit writes to MMIO\n"); + exit(1); +} + +static void handle_port_status_write(EHCIState *s, int port, uint32_t val) +{ + uint32_t *portsc = &s->portsc[port]; + int rwc; + USBDevice *dev = s->ports[port].dev; + + DPRINTF("port_status_write: " + "PORTSC (port %d) curr %08X new %08X rw-clear %08X rw %08X\n", + port, *portsc, val, (val & PORTSC_RWC_MASK), val & PORTSC_RO_MASK); + + rwc = val & PORTSC_RWC_MASK; + val &= PORTSC_RO_MASK; + + // handle_read_write_clear(&val, portsc, PORTSC_PEDC | PORTSC_CSC); + + *portsc &= ~rwc; + + if ((val & PORTSC_PRESET) && !(*portsc & PORTSC_PRESET)) { + DPRINTF("port_status_write: USBTRAN Port %d reset begin\n", port); + } + + if (!(val & PORTSC_PRESET) &&(*portsc & PORTSC_PRESET)) { + DPRINTF("port_status_write: USBTRAN Port %d reset done\n", port); + usb_attach(&s->ports[port], dev); + + // TODO how to handle reset of ports with no device + if (dev) { + usb_send_msg(dev, USB_MSG_RESET); + } + + if (s->ports[port].dev) { + DPRINTF("port_status_write: " + "Device was connected before reset, clearing CSC bit\n"); + *portsc &= ~PORTSC_CSC; + } + + /* Table 2.16 Set the enable bit(and enable bit change) to indicate + * to SW that this port has a high speed device attached + * + * TODO - when to disable? + */ + val |= PORTSC_PED; + val |= PORTSC_PEDC; + } + + *portsc &= ~PORTSC_RO_MASK; + *portsc |= val; + DPRINTF("port_status_write: Port %d status set to 0x%08x\n", port, *portsc); +} + +static void ehci_mem_writel(void *ptr, target_phys_addr_t addr, uint32_t val) +{ + EHCIState *s = ptr; + int i; +#if EHCI_DEBUG + const char *str; +#endif + + /* Only aligned reads are allowed on OHCI */ + if (addr & 3) { + fprintf(stderr, "usb-ehci: Mis-aligned write to addr 0x" + TARGET_FMT_plx "\n", addr); + return; + } + + if (addr >= PORTSC && addr < PORTSC + 4 * NB_PORTS) { + handle_port_status_write(s, (addr-PORTSC)/4, val); + return; + } + + if (addr < OPREGBASE) { + fprintf(stderr, "usb-ehci: write attempt to read-only register" + TARGET_FMT_plx "\n", addr); + return; + } + + + /* Do any register specific pre-write processing here. */ +#if EHCI_DEBUG + str = addr2str((unsigned) addr); +#endif + switch(addr) { + case USBCMD: + DPRINTF("ehci_mem_writel: USBCMD val=0x%08X, current cmd=0x%08X\n", + val, s->usbcmd); + + if ((val & USBCMD_RUNSTOP) && !(s->usbcmd & USBCMD_RUNSTOP)) { + DPRINTF("ehci_mem_writel: %s run, clear halt\n", str); + qemu_mod_timer(s->frame_timer, qemu_get_clock_ns(vm_clock)); + SET_LAST_RUN_CLOCK(s); + s->usbsts &= ~USBSTS_HALT; + } + + if (!(val & USBCMD_RUNSTOP) && (s->usbcmd & USBCMD_RUNSTOP)) { + DPRINTF(" ** STOP **\n"); + qemu_del_timer(s->frame_timer); + // TODO - should finish out some stuff before setting halt + s->usbsts |= USBSTS_HALT; + } + + if (val & USBCMD_HCRESET) { + DPRINTF("ehci_mem_writel: %s run, resetting\n", str); + ehci_reset(s); + val &= ~USBCMD_HCRESET; + } + + /* not supporting dynamic frame list size at the moment */ + if ((val & USBCMD_FLS) && !(s->usbcmd & USBCMD_FLS)) { + fprintf(stderr, "attempt to set frame list size -- value %d\n", + val & USBCMD_FLS); + val &= ~USBCMD_FLS; + } +#if EHCI_DEBUG + if ((val & USBCMD_PSE) && !(s->usbcmd & USBCMD_PSE)) { + DPRINTF("periodic scheduling enabled\n"); + } + if (!(val & USBCMD_PSE) && (s->usbcmd & USBCMD_PSE)) { + DPRINTF("periodic scheduling disabled\n"); + } + if ((val & USBCMD_ASE) && !(s->usbcmd & USBCMD_ASE)) { + DPRINTF("asynchronous scheduling enabled\n"); + } + if (!(val & USBCMD_ASE) && (s->usbcmd & USBCMD_ASE)) { + DPRINTF("asynchronous scheduling disabled\n"); + } + if ((val & USBCMD_IAAD) && !(s->usbcmd & USBCMD_IAAD)) { + DPRINTF("doorbell request received\n"); + } + if ((val & USBCMD_LHCR) && !(s->usbcmd & USBCMD_LHCR)) { + DPRINTF("light host controller reset received\n"); + } + if ((val & USBCMD_ITC) != (s->usbcmd & USBCMD_ITC)) { + DPRINTF("interrupt threshold control set to %x\n", + (val & USBCMD_ITC)>>USBCMD_ITC_SH); + } +#endif + break; + + + case USBSTS: + val &= USBSTS_RO_MASK; // bits 6 thru 31 are RO + DPRINTF("ehci_mem_writel: %s RWC set to 0x%08X\n", str, val); + + val = (s->usbsts &= ~val); // bits 0 thru 5 are R/WC + + DPRINTF("ehci_mem_writel: %s updating interrupt condition\n", str); + ehci_set_interrupt(s, 0); + break; + + + case USBINTR: + val &= USBINTR_MASK; + DPRINTF("ehci_mem_writel: %s set to 0x%08X\n", str, val); + break; + + case FRINDEX: + s->sofv = val >> 3; + DPRINTF("ehci_mem_writel: %s set to 0x%08X\n", str, val); + break; + + case CONFIGFLAG: + DPRINTF("ehci_mem_writel: %s set to 0x%08X\n", str, val); + val &= 0x1; + if (val) { + for(i = 0; i < NB_PORTS; i++) + s->portsc[i] &= ~PORTSC_POWNER; + } + break; + + case PERIODICLISTBASE: + if ((s->usbcmd & USBCMD_PSE) && (s->usbcmd & USBCMD_RUNSTOP)) { + fprintf(stderr, + "ehci: PERIODIC list base register set while periodic schedule\n" + " is enabled and HC is enabled\n"); + } + DPRINTF("ehci_mem_writel: P-LIST BASE set to 0x%08X\n", val); + break; + + case ASYNCLISTADDR: + if ((s->usbcmd & USBCMD_ASE) && (s->usbcmd & USBCMD_RUNSTOP)) { + fprintf(stderr, + "ehci: ASYNC list address register set while async schedule\n" + " is enabled and HC is enabled\n"); + } + DPRINTF("ehci_mem_writel: A-LIST ADDR set to 0x%08X\n", val); + break; + } + + *(uint32_t *)(&s->mmio[addr]) = val; +} + + +// TODO : Put in common header file, duplication from usb-ohci.c + +/* Get an array of dwords from main memory */ +static inline int get_dwords(uint32_t addr, uint32_t *buf, int num) +{ + int i; + + for(i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + cpu_physical_memory_rw(addr,(uint8_t *)buf, sizeof(*buf), 0); + *buf = le32_to_cpu(*buf); + } + + return 1; +} + +/* Put an array of dwords in to main memory */ +static inline int put_dwords(uint32_t addr, uint32_t *buf, int num) +{ + int i; + + for(i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + uint32_t tmp = cpu_to_le32(*buf); + cpu_physical_memory_rw(addr,(uint8_t *)&tmp, sizeof(tmp), 1); + } + + return 1; +} + +// 4.10.2 + +static int ehci_qh_do_overlay(EHCIState *ehci, EHCIqh *qh, EHCIqtd *qtd) +{ + int i; + int dtoggle; + int ping; + int eps; + int reload; + + // remember values in fields to preserve in qh after overlay + + dtoggle = qh->token & QTD_TOKEN_DTOGGLE; + ping = qh->token & QTD_TOKEN_PING; + + DPRINTF("setting qh.current from %08X to 0x%08X\n", qh->current_qtd, + ehci->qtdaddr); + qh->current_qtd = ehci->qtdaddr; + qh->next_qtd = qtd->next; + qh->altnext_qtd = qtd->altnext; + qh->token = qtd->token; + + + eps = get_field(qh->epchar, QH_EPCHAR_EPS); + if (eps == EHCI_QH_EPS_HIGH) { + qh->token &= ~QTD_TOKEN_PING; + qh->token |= ping; + } + + reload = get_field(qh->epchar, QH_EPCHAR_RL); + set_field(&qh->altnext_qtd, reload, QH_ALTNEXT_NAKCNT); + + for (i = 0; i < 5; i++) { + qh->bufptr[i] = qtd->bufptr[i]; + } + + if (!(qh->epchar & QH_EPCHAR_DTC)) { + // preserve QH DT bit + qh->token &= ~QTD_TOKEN_DTOGGLE; + qh->token |= dtoggle; + } + + qh->bufptr[1] &= ~BUFPTR_CPROGMASK_MASK; + qh->bufptr[2] &= ~BUFPTR_FRAMETAG_MASK; + + put_dwords(NLPTR_GET(ehci->qhaddr), (uint32_t *) qh, sizeof(EHCIqh) >> 2); + + return 0; +} + +static int ehci_buffer_rw(uint8_t *buffer, EHCIqh *qh, int bytes, int rw) +{ + int bufpos = 0; + int cpage, offset; + uint32_t head; + uint32_t tail; + + + if (!bytes) { + return 0; + } + + cpage = get_field(qh->token, QTD_TOKEN_CPAGE); + if (cpage > 4) { + fprintf(stderr, "cpage out of range (%d)\n", cpage); + return USB_RET_PROCERR; + } + + offset = qh->bufptr[0] & ~QTD_BUFPTR_MASK; + DPRINTF("ehci_buffer_rw: %sing %d bytes %08x cpage %d offset %d\n", + rw ? "writ" : "read", bytes, qh->bufptr[0], cpage, offset); + + do { + /* start and end of this page */ + head = qh->bufptr[cpage] & QTD_BUFPTR_MASK; + tail = head + ~QTD_BUFPTR_MASK + 1; + /* add offset into page */ + head |= offset; + + if (bytes <= (tail - head)) { + tail = head + bytes; + } + + DPRINTF("DATA %s cpage:%d head:%08X tail:%08X target:%08X\n", + rw ? "WRITE" : "READ ", cpage, head, tail, bufpos); + + cpu_physical_memory_rw(head, &buffer[bufpos], tail - head, rw); + + bufpos += (tail - head); + bytes -= (tail - head); + + if (bytes > 0) { + cpage++; + offset = 0; + } + } while (bytes > 0); + + /* save cpage */ + set_field(&qh->token, cpage, QTD_TOKEN_CPAGE); + + /* save offset into cpage */ + offset = tail - head; + qh->bufptr[0] &= ~QTD_BUFPTR_MASK; + qh->bufptr[0] |= offset; + + return 0; +} + +static void ehci_async_complete_packet(USBDevice *dev, USBPacket *packet) +{ + EHCIState *ehci = container_of(packet, EHCIState, usb_packet); + + DPRINTF("Async packet complete\n"); + ehci->async_complete = 1; + ehci->exec_status = packet->len; +} + +static int ehci_execute_complete(EHCIState *ehci, EHCIqh *qh, int ret) +{ + int c_err, reload; + + if (ret == USB_RET_ASYNC && !ehci->async_complete) { + DPRINTF("not done yet\n"); + return ret; + } + + ehci->async_complete = 0; + + DPRINTF("execute_complete: qhaddr 0x%x, next %x, qtdaddr 0x%x, status %d\n", + ehci->qhaddr, qh->next, ehci->qtdaddr, ret); + + if (ret < 0) { +err: + /* TO-DO: put this is in a function that can be invoked below as well */ + c_err = get_field(qh->token, QTD_TOKEN_CERR); + c_err--; + set_field(&qh->token, c_err, QTD_TOKEN_CERR); + + switch(ret) { + case USB_RET_NODEV: + fprintf(stderr, "USB no device\n"); + break; + case USB_RET_STALL: + fprintf(stderr, "USB stall\n"); + qh->token |= QTD_TOKEN_HALT; + ehci_record_interrupt(ehci, USBSTS_ERRINT); + break; + case USB_RET_NAK: + /* 4.10.3 */ + reload = get_field(qh->epchar, QH_EPCHAR_RL); + if ((ehci->pid == USB_TOKEN_IN) && reload) { + int nakcnt = get_field(qh->altnext_qtd, QH_ALTNEXT_NAKCNT); + nakcnt--; + set_field(&qh->altnext_qtd, nakcnt, QH_ALTNEXT_NAKCNT); + } else if (!reload) { + return USB_RET_NAK; + } + break; + case USB_RET_BABBLE: + fprintf(stderr, "USB babble TODO\n"); + qh->token |= QTD_TOKEN_BABBLE; + ehci_record_interrupt(ehci, USBSTS_ERRINT); + break; + default: + fprintf(stderr, "USB invalid response %d to handle\n", ret); + /* TO-DO: transaction error */ + ret = USB_RET_PROCERR; + break; + } + } else { + // DPRINTF("Short packet condition\n"); + // TODO check 4.12 for splits + + if ((ret > ehci->tbytes) && (ehci->pid == USB_TOKEN_IN)) { + ret = USB_RET_BABBLE; + goto err; + } + + if (ehci->tbytes && ehci->pid == USB_TOKEN_IN) { + if (ehci_buffer_rw(ehci->buffer, qh, ret, 1) != 0) { + return USB_RET_PROCERR; + } + ehci->tbytes -= ret; + } else { + ehci->tbytes = 0; + } + + DPRINTF("updating tbytes to %d\n", ehci->tbytes); + set_field(&qh->token, ehci->tbytes, QTD_TOKEN_TBYTES); + } + + qh->token ^= QTD_TOKEN_DTOGGLE; + qh->token &= ~QTD_TOKEN_ACTIVE; + + if ((ret >= 0) && (qh->token & QTD_TOKEN_IOC)) { + ehci_record_interrupt(ehci, USBSTS_INT); + } + + return ret; +} + +// 4.10.3 + +static int ehci_execute(EHCIState *ehci, EHCIqh *qh) +{ + USBPort *port; + USBDevice *dev; + int ret; + int i; + int endp; + int devadr; + + if ( !(qh->token & QTD_TOKEN_ACTIVE)) { + fprintf(stderr, "Attempting to execute inactive QH\n"); + return USB_RET_PROCERR; + } + + ehci->tbytes = (qh->token & QTD_TOKEN_TBYTES_MASK) >> QTD_TOKEN_TBYTES_SH; + if (ehci->tbytes > BUFF_SIZE) { + fprintf(stderr, "Request for more bytes than allowed\n"); + return USB_RET_PROCERR; + } + + ehci->pid = (qh->token & QTD_TOKEN_PID_MASK) >> QTD_TOKEN_PID_SH; + switch(ehci->pid) { + case 0: ehci->pid = USB_TOKEN_OUT; break; + case 1: ehci->pid = USB_TOKEN_IN; break; + case 2: ehci->pid = USB_TOKEN_SETUP; break; + default: fprintf(stderr, "bad token\n"); break; + } + + if ((ehci->tbytes && ehci->pid != USB_TOKEN_IN) && + (ehci_buffer_rw(ehci->buffer, qh, ehci->tbytes, 0) != 0)) { + return USB_RET_PROCERR; + } + + endp = get_field(qh->epchar, QH_EPCHAR_EP); + devadr = get_field(qh->epchar, QH_EPCHAR_DEVADDR); + + ret = USB_RET_NODEV; + + // TO-DO: associating device with ehci port + for(i = 0; i < NB_PORTS; i++) { + port = &ehci->ports[i]; + dev = port->dev; + + // TODO sometime we will also need to check if we are the port owner + + if (!(ehci->portsc[i] &(PORTSC_CONNECT))) { + DPRINTF("Port %d, no exec, not connected(%08X)\n", + i, ehci->portsc[i]); + continue; + } + + ehci->usb_packet.pid = ehci->pid; + ehci->usb_packet.devaddr = devadr; + ehci->usb_packet.devep = endp; + ehci->usb_packet.data = ehci->buffer; + ehci->usb_packet.len = ehci->tbytes; + + ret = usb_handle_packet(dev, &ehci->usb_packet); + + DPRINTF("submit: qh %x next %x qtd %x pid %x len %d (total %d) endp %x ret %d\n", + ehci->qhaddr, qh->next, ehci->qtdaddr, ehci->pid, + ehci->usb_packet.len, ehci->tbytes, endp, ret); + + if (ret != USB_RET_NODEV) { + break; + } + } + + if (ret > BUFF_SIZE) { + fprintf(stderr, "ret from usb_handle_packet > BUFF_SIZE\n"); + return USB_RET_PROCERR; + } + + if (ret == USB_RET_ASYNC) { + ehci->async_complete = 0; + } + + return ret; +} + +/* 4.7.2 + */ + +static int ehci_process_itd(EHCIState *ehci, + EHCIitd *itd) +{ + USBPort *port; + USBDevice *dev; + int ret; + int i, j; + int ptr; + int pid; + int pg; + int len; + int dir; + int devadr; + int endp; + int maxpkt; + + dir =(itd->bufptr[1] & ITD_BUFPTR_DIRECTION); + devadr = get_field(itd->bufptr[0], ITD_BUFPTR_DEVADDR); + endp = get_field(itd->bufptr[0], ITD_BUFPTR_EP); + maxpkt = get_field(itd->bufptr[1], ITD_BUFPTR_MAXPKT); + + for(i = 0; i < 8; i++) { + if (itd->transact[i] & ITD_XACT_ACTIVE) { + DPRINTF("ISOCHRONOUS active for frame %d, interval %d\n", + ehci->frindex >> 3, i); + + pg = get_field(itd->transact[i], ITD_XACT_PGSEL); + ptr = (itd->bufptr[pg] & ITD_BUFPTR_MASK) | + (itd->transact[i] & ITD_XACT_OFFSET_MASK); + len = get_field(itd->transact[i], ITD_XACT_LENGTH); + + if (len > BUFF_SIZE) { + return USB_RET_PROCERR; + } + + DPRINTF("ISOCH: buffer %08X len %d\n", ptr, len); + + if (!dir) { + cpu_physical_memory_rw(ptr, &ehci->buffer[0], len, 0); + pid = USB_TOKEN_OUT; + } else + pid = USB_TOKEN_IN; + + ret = USB_RET_NODEV; + + for (j = 0; j < NB_PORTS; j++) { + port = &ehci->ports[j]; + dev = port->dev; + + // TODO sometime we will also need to check if we are the port owner + + if (!(ehci->portsc[j] &(PORTSC_CONNECT))) { + DPRINTF("Port %d, no exec, not connected(%08X)\n", + j, ehci->portsc[j]); + continue; + } + + ehci->usb_packet.pid = ehci->pid; + ehci->usb_packet.devaddr = devadr; + ehci->usb_packet.devep = endp; + ehci->usb_packet.data = ehci->buffer; + ehci->usb_packet.len = len; + + DPRINTF("calling usb_handle_packet\n"); + ret = usb_handle_packet(dev, &ehci->usb_packet); + + if (ret != USB_RET_NODEV) { + break; + } + } + + /* In isoch, there is no facility to indicate a NAK so let's + * instead just complete a zero-byte transaction. Setting + * DBERR seems too draconian. + */ + + if (ret == USB_RET_NAK) { + if (ehci->isoch_pause > 0) { + DPRINTF("ISOCH: received a NAK but paused so returning\n"); + ehci->isoch_pause--; + return 0; + } else if (ehci->isoch_pause == -1) { + DPRINTF("ISOCH: recv NAK & isoch pause inactive, setting\n"); + // Pause frindex for up to 50 msec waiting for data from + // remote + ehci->isoch_pause = 50; + return 0; + } else { + DPRINTF("ISOCH: isoch pause timeout! return 0\n"); + ret = 0; + } + } else { + DPRINTF("ISOCH: received ACK, clearing pause\n"); + ehci->isoch_pause = -1; + } + + if (ret >= 0) { + itd->transact[i] &= ~ITD_XACT_ACTIVE; + + if (itd->transact[i] & ITD_XACT_IOC) { + ehci_record_interrupt(ehci, USBSTS_INT); + } + } + + if (ret >= 0 && dir) { + cpu_physical_memory_rw(ptr, &ehci->buffer[0], len, 1); + + if (ret != len) { + DPRINTF("ISOCH IN expected %d, got %d\n", + len, ret); + set_field(&itd->transact[i], ret, ITD_XACT_LENGTH); + } + } + } + } + return 0; +} + +/* This state is the entry point for asynchronous schedule + * processing. Entry here consitutes a EHCI start event state (4.8.5) + */ +static int ehci_state_waitlisthead(EHCIState *ehci, int async, int *state) +{ + EHCIqh *qh = &ehci->qh; + int i = 0; + int again = 0; + uint32_t entry = ehci->asynclistaddr; + + /* set reclamation flag at start event (4.8.6) */ + if (async) { + ehci->usbsts |= USBSTS_REC; + } + + /* Find the head of the list (4.9.1.1) */ + for(i = 0; i < MAX_QH; i++) { + get_dwords(NLPTR_GET(entry), (uint32_t *) qh, sizeof(EHCIqh) >> 2); + + if (qh->epchar & QH_EPCHAR_H) { + DPRINTF_ST("WAITLISTHEAD: QH %08X is the HEAD of the list\n", + entry); + if (async) { + entry |= (NLPTR_TYPE_QH << 1); + } + + ehci->fetch_addr = entry; + *state = EST_FETCHENTRY; + again = 1; + goto out; + } + + DPRINTF_ST("WAITLISTHEAD: QH %08X is NOT the HEAD of the list\n", + entry); + entry = qh->next; + if (entry == ehci->asynclistaddr) { + DPRINTF("WAITLISTHEAD: reached beginning of QH list\n"); + break; + } + } + + /* no head found for list. */ + + *state = EST_ACTIVE; + +out: + return again; +} + + +/* This state is the entry point for periodic schedule processing as + * well as being a continuation state for async processing. + */ +static int ehci_state_fetchentry(EHCIState *ehci, int async, int *state) +{ + int again = 0; + uint32_t entry = ehci->fetch_addr; + +#if EHCI_DEBUG == 0 + if (qemu_get_clock_ns(vm_clock) / 1000 >= ehci->frame_end_usec) { + if (async) { + DPRINTF("FETCHENTRY: FRAME timer elapsed, exit state machine\n"); + goto out; + } else { + DPRINTF("FETCHENTRY: WARNING " + "- frame timer elapsed during periodic\n"); + } + } +#endif + if (entry < 0x1000) { + DPRINTF("fetchentry: entry invalid (0x%08x)\n", entry); + *state = EST_ACTIVE; + goto out; + } + + /* section 4.8, only QH in async schedule */ + if (async && (NLPTR_TYPE_GET(entry) != NLPTR_TYPE_QH)) { + fprintf(stderr, "non queue head request in async schedule\n"); + return -1; + } + + switch (NLPTR_TYPE_GET(entry)) { + case NLPTR_TYPE_QH: + DPRINTF_ST("FETCHENTRY: entry %X is a Queue Head\n", entry); + *state = EST_FETCHQH; + ehci->qhaddr = entry; + again = 1; + break; + + case NLPTR_TYPE_ITD: + DPRINTF_ST("FETCHENTRY: entry %X is an ITD\n", entry); + *state = EST_FETCHITD; + ehci->itdaddr = entry; + again = 1; + break; + + default: + // TODO: handle siTD and FSTN types + fprintf(stderr, "FETCHENTRY: entry at %X is of type %d " + "which is not supported yet\n", entry, NLPTR_TYPE_GET(entry)); + return -1; + } + +out: + return again; +} + +static int ehci_state_fetchqh(EHCIState *ehci, int async, int *state) +{ + EHCIqh *qh = &ehci->qh; + int reload; + int again = 0; + + get_dwords(NLPTR_GET(ehci->qhaddr), (uint32_t *) qh, sizeof(EHCIqh) >> 2); + + if (async && (qh->epchar & QH_EPCHAR_H)) { + + /* EHCI spec version 1.0 Section 4.8.3 & 4.10.1 */ + if (ehci->usbsts & USBSTS_REC) { + ehci->usbsts &= ~USBSTS_REC; + } else { + DPRINTF("FETCHQH: QH 0x%08x. H-bit set, reclamation status reset" + " - done processing\n", ehci->qhaddr); + *state = EST_ACTIVE; + goto out; + } + } + +#if EHCI_DEBUG + if (ehci->qhaddr != qh->next) { + DPRINTF("FETCHQH: QH 0x%08x (h %x halt %x active %x) next 0x%08x\n", + ehci->qhaddr, + qh->epchar & QH_EPCHAR_H, + qh->token & QTD_TOKEN_HALT, + qh->token & QTD_TOKEN_ACTIVE, + qh->next); + } +#endif + + reload = get_field(qh->epchar, QH_EPCHAR_RL); + if (reload) { + DPRINTF_ST("FETCHQH: reloading nakcnt to %d\n", reload); + set_field(&qh->altnext_qtd, reload, QH_ALTNEXT_NAKCNT); + } + + if (qh->token & QTD_TOKEN_HALT) { + DPRINTF_ST("FETCHQH: QH Halted, go horizontal\n"); + *state = EST_HORIZONTALQH; + again = 1; + + } else if ((qh->token & QTD_TOKEN_ACTIVE) && (qh->current_qtd > 0x1000)) { + DPRINTF_ST("FETCHQH: Active, !Halt, execute - fetch qTD\n"); + ehci->qtdaddr = qh->current_qtd; + *state = EST_FETCHQTD; + again = 1; + + } else { + /* EHCI spec version 1.0 Section 4.10.2 */ + DPRINTF_ST("FETCHQH: !Active, !Halt, advance queue\n"); + *state = EST_ADVANCEQUEUE; + again = 1; + } + +out: + return again; +} + +static int ehci_state_fetchitd(EHCIState *ehci, int async, int *state) +{ + EHCIitd itd; + + get_dwords(NLPTR_GET(ehci->itdaddr),(uint32_t *) &itd, + sizeof(EHCIitd) >> 2); + DPRINTF_ST("FETCHITD: Fetched ITD at address %08X " "(next is %08X)\n", + ehci->itdaddr, itd.next); + + if (ehci_process_itd(ehci, &itd) != 0) { + return -1; + } + + put_dwords(NLPTR_GET(ehci->itdaddr), (uint32_t *) &itd, + sizeof(EHCIitd) >> 2); + ehci->fetch_addr = itd.next; + *state = EST_FETCHENTRY; + + return 1; +} + +/* Section 4.10.2 - paragraph 3 */ +static int ehci_state_advqueue(EHCIState *ehci, int async, int *state) +{ +#if 0 + /* TO-DO: 4.10.2 - paragraph 2 + * if I-bit is set to 1 and QH is not active + * go to horizontal QH + */ + if (I-bit set) { + *state = EST_HORIZONTALQH; + goto out; + } +#endif + + /* + * want data and alt-next qTD is valid + */ + if (((ehci->qh.token & QTD_TOKEN_TBYTES_MASK) != 0) && + (ehci->qh.altnext_qtd > 0x1000) && + (NLPTR_TBIT(ehci->qh.altnext_qtd) == 0)) { + DPRINTF_ST("ADVQUEUE: goto alt next qTD. " + "curr 0x%08x next 0x%08x alt 0x%08x (next qh %x)\n", + ehci->qh.current_qtd, ehci->qh.altnext_qtd, + ehci->qh.next_qtd, ehci->qh.next); + ehci->qtdaddr = ehci->qh.altnext_qtd; + *state = EST_FETCHQTD; + + /* + * next qTD is valid + */ + } else if ((ehci->qh.next_qtd > 0x1000) && + (NLPTR_TBIT(ehci->qh.next_qtd) == 0)) { + DPRINTF_ST("ADVQUEUE: next qTD. " + "curr 0x%08x next 0x%08x alt 0x%08x (next qh %x)\n", + ehci->qh.current_qtd, ehci->qh.altnext_qtd, + ehci->qh.next_qtd, ehci->qh.next); + ehci->qtdaddr = ehci->qh.next_qtd; + *state = EST_FETCHQTD; + + /* + * no valid qTD, try next QH + */ + } else { + DPRINTF_ST("ADVQUEUE: go to horizontal QH\n"); + *state = EST_HORIZONTALQH; + } + + return 1; +} + +/* Section 4.10.2 - paragraph 4 */ +static int ehci_state_fetchqtd(EHCIState *ehci, int async, int *state) +{ + EHCIqtd *qtd = &ehci->qtd; + int again = 0; + + get_dwords(NLPTR_GET(ehci->qtdaddr),(uint32_t *) qtd, sizeof(EHCIqtd) >> 2); + + if (qtd->token & QTD_TOKEN_ACTIVE) { + *state = EST_EXECUTE; + again = 1; + } else { + *state = EST_HORIZONTALQH; + again = 1; + } + + return again; +} + +static int ehci_state_horizqh(EHCIState *ehci, int async, int *state) +{ + int again = 0; + + if (ehci->fetch_addr != ehci->qh.next) { + ehci->fetch_addr = ehci->qh.next; + *state = EST_FETCHENTRY; + again = 1; + } else { + *state = EST_ACTIVE; + } + + return again; +} + +static int ehci_state_execute(EHCIState *ehci, int async, int *state) +{ + EHCIqh *qh = &ehci->qh; + EHCIqtd *qtd = &ehci->qtd; + int again = 0; + int reload, nakcnt; + int smask; + + if (async) { + DPRINTF_ST(">>>>> ASYNC STATE MACHINE execute QH 0x%08x, QTD 0x%08x\n", + ehci->qhaddr, ehci->qtdaddr); + } else { + DPRINTF_ST(">>>>> PERIODIC STATE MACHINE execute\n"); + } + + if (ehci_qh_do_overlay(ehci, qh, qtd) != 0) { + return -1; + } + + smask = get_field(qh->epcap, QH_EPCAP_SMASK); + + if (!smask) { + reload = get_field(qh->epchar, QH_EPCHAR_RL); + nakcnt = get_field(qh->altnext_qtd, QH_ALTNEXT_NAKCNT); + if (reload && !nakcnt) { + DPRINTF_ST("EXECUTE: RL != 0 but NakCnt == 0 -- no execute\n"); + *state = EST_HORIZONTALQH; + again = 1; + goto out; + } + } + + // TODO verify enough time remains in the uframe as in 4.4.1.1 + // TODO write back ptr to async list when done or out of time + // TODO Windows does not seem to ever set the MULT field + + if (!async) { + int transactCtr = get_field(qh->epcap, QH_EPCAP_MULT); + if (!transactCtr) { + DPRINTF("ZERO transactctr for int qh, go HORIZ\n"); + *state = EST_HORIZONTALQH; + again = 1; + goto out; + } + } + + if (async) { + ehci->usbsts |= USBSTS_REC; + } + + ehci->exec_status = ehci_execute(ehci, qh); + if (ehci->exec_status == USB_RET_PROCERR) { + again = -1; + goto out; + } + *state = EST_EXECUTING; + + if (ehci->exec_status != USB_RET_ASYNC) { + again = 1; + } + +out: + return again; +} + +static int ehci_state_executing(EHCIState *ehci, int async, int *state) +{ + EHCIqh *qh = &ehci->qh; + int again = 0; + int reload, nakcnt; + + ehci->exec_status = ehci_execute_complete(ehci, qh, ehci->exec_status); + if (ehci->exec_status == USB_RET_ASYNC) { + goto out; + } + if (ehci->exec_status == USB_RET_PROCERR) { + again = -1; + goto out; + } + + // 4.10.3 + if (!async) { + int transactCtr = get_field(qh->epcap, QH_EPCAP_MULT); + transactCtr--; + set_field(&qh->epcap, transactCtr, QH_EPCAP_MULT); + // 4.10.3, bottom of page 82, should exit this state when transaction + // counter decrements to 0 + } + + + reload = get_field(qh->epchar, QH_EPCHAR_RL); + if (reload) { + nakcnt = get_field(qh->altnext_qtd, QH_ALTNEXT_NAKCNT); + if (ehci->exec_status == USB_RET_NAK) { + if (nakcnt) { + nakcnt--; + } + DPRINTF_ST("EXECUTING: Nak occured and RL != 0, dec NakCnt to %d\n", + nakcnt); + } else { + nakcnt = reload; + DPRINTF_ST("EXECUTING: Nak didn't occur, reloading to %d\n", + nakcnt); + } + set_field(&qh->altnext_qtd, nakcnt, QH_ALTNEXT_NAKCNT); + } + + /* + * Write the qh back to guest physical memory. This step isn't + * in the EHCI spec but we need to do it since we don't share + * physical memory with our guest VM. + */ + + DPRINTF("EXECUTING: write QH to VM memory: qhaddr 0x%x, next 0x%x\n", + ehci->qhaddr, qh->next); + put_dwords(NLPTR_GET(ehci->qhaddr), (uint32_t *) qh, sizeof(EHCIqh) >> 2); + + /* 4.10.5 */ + if ((ehci->exec_status == USB_RET_NAK) || (qh->token & QTD_TOKEN_ACTIVE)) { + *state = EST_HORIZONTALQH; + } else { + *state = EST_WRITEBACK; + } + + again = 1; + +out: + return again; +} + + +static int ehci_state_writeback(EHCIState *ehci, int async, int *state) +{ + EHCIqh *qh = &ehci->qh; + int again = 0; + + /* Write back the QTD from the QH area */ + DPRINTF_ST("WRITEBACK: write QTD to VM memory\n"); + put_dwords(NLPTR_GET(ehci->qtdaddr),(uint32_t *) &qh->next_qtd, + sizeof(EHCIqtd) >> 2); + + /* TODO confirm next state. For now, keep going if async + * but stop after one qtd if periodic + */ + //if (async) { + *state = EST_ADVANCEQUEUE; + again = 1; + //} else { + // *state = EST_ACTIVE; + //} + return again; +} + +/* + * This is the state machine that is common to both async and periodic + */ + +static int ehci_advance_state(EHCIState *ehci, + int async, + int state) +{ + int again; + int iter = 0; + + do { + if (state == EST_FETCHQH) { + iter++; + /* if we are roaming a lot of QH without executing a qTD + * something is wrong with the linked list. TO-DO: why is + * this hack needed? + */ + if (iter > MAX_ITERATIONS) { + DPRINTF("\n*** advance_state: bailing on MAX ITERATIONS***\n"); + state = EST_ACTIVE; + break; + } + } + switch(state) { + case EST_WAITLISTHEAD: + again = ehci_state_waitlisthead(ehci, async, &state); + break; + + case EST_FETCHENTRY: + again = ehci_state_fetchentry(ehci, async, &state); + break; + + case EST_FETCHQH: + again = ehci_state_fetchqh(ehci, async, &state); + break; + + case EST_FETCHITD: + again = ehci_state_fetchitd(ehci, async, &state); + break; + + case EST_ADVANCEQUEUE: + again = ehci_state_advqueue(ehci, async, &state); + break; + + case EST_FETCHQTD: + again = ehci_state_fetchqtd(ehci, async, &state); + break; + + case EST_HORIZONTALQH: + again = ehci_state_horizqh(ehci, async, &state); + break; + + case EST_EXECUTE: + iter = 0; + again = ehci_state_execute(ehci, async, &state); + break; + + case EST_EXECUTING: + again = ehci_state_executing(ehci, async, &state); + break; + + case EST_WRITEBACK: + again = ehci_state_writeback(ehci, async, &state); + break; + + default: + fprintf(stderr, "Bad state!\n"); + again = -1; + break; + } + + if (again < 0) { + fprintf(stderr, "processing error - resetting ehci HC\n"); + ehci_reset(ehci); + again = 0; + } + } + while (again); + + ehci_commit_interrupt(ehci); + return state; +} + +static void ehci_advance_async_state(EHCIState *ehci) +{ + EHCIqh qh; + int state = ehci->astate; + + switch(state) { + case EST_INACTIVE: + if (!(ehci->usbcmd & USBCMD_ASE)) { + break; + } + ehci->usbsts |= USBSTS_ASS; + ehci->astate = EST_ACTIVE; + // No break, fall through to ACTIVE + + case EST_ACTIVE: + if ( !(ehci->usbcmd & USBCMD_ASE)) { + ehci->usbsts &= ~USBSTS_ASS; + ehci->astate = EST_INACTIVE; + break; + } + + /* If the doorbell is set, the guest wants to make a change to the + * schedule. The host controller needs to release cached data. + * (section 4.8.2) + */ + if (ehci->usbcmd & USBCMD_IAAD) { + DPRINTF("ASYNC: doorbell request acknowledged\n"); + ehci->usbcmd &= ~USBCMD_IAAD; + ehci_set_interrupt(ehci, USBSTS_IAA); + break; + } + + /* make sure guest has acknowledged */ + /* TO-DO: is this really needed? */ + if (ehci->usbsts & USBSTS_IAA) { + DPRINTF("IAA status bit still set.\n"); + break; + } + + DPRINTF_ST("ASYNC: waiting for listhead, starting at %08x\n", + ehci->asynclistaddr); + /* check that address register has been set */ + if (ehci->asynclistaddr == 0) { + break; + } + + state = EST_WAITLISTHEAD; + /* fall through */ + + case EST_FETCHENTRY: + /* fall through */ + + case EST_EXECUTING: + get_dwords(NLPTR_GET(ehci->qhaddr), (uint32_t *) &qh, + sizeof(EHCIqh) >> 2); + ehci->astate = ehci_advance_state(ehci, 1, state); + break; + + default: + /* this should only be due to a developer mistake */ + fprintf(stderr, "ehci: Bad asynchronous state %d. " + "Resetting to active\n", ehci->astate); + ehci->astate = EST_ACTIVE; + } +} + +static void ehci_advance_periodic_state(EHCIState *ehci) +{ + uint32_t entry; + uint32_t list; + + // 4.6 + + switch(ehci->pstate) { + case EST_INACTIVE: + if ( !(ehci->frindex & 7) && (ehci->usbcmd & USBCMD_PSE)) { + DPRINTF("PERIODIC going active\n"); + ehci->usbsts |= USBSTS_PSS; + ehci->pstate = EST_ACTIVE; + // No break, fall through to ACTIVE + } else + break; + + case EST_ACTIVE: + if ( !(ehci->frindex & 7) && !(ehci->usbcmd & USBCMD_PSE)) { + DPRINTF("PERIODIC going inactive\n"); + ehci->usbsts &= ~USBSTS_PSS; + ehci->pstate = EST_INACTIVE; + break; + } + + list = ehci->periodiclistbase & 0xfffff000; + /* check that register has been set */ + if (list == 0) { + break; + } + list |= ((ehci->frindex & 0x1ff8) >> 1); + + cpu_physical_memory_rw(list, (uint8_t *) &entry, sizeof entry, 0); + entry = le32_to_cpu(entry); + + DPRINTF("PERIODIC state adv fr=%d. [%08X] -> %08X\n", + ehci->frindex / 8, list, entry); + ehci->fetch_addr = entry; + ehci->pstate = ehci_advance_state(ehci, 0, EST_FETCHENTRY); + break; + + case EST_EXECUTING: + DPRINTF("PERIODIC state adv for executing\n"); + ehci->pstate = ehci_advance_state(ehci, 0, EST_EXECUTING); + break; + + default: + /* this should only be due to a developer mistake */ + fprintf(stderr, "ehci: Bad periodic state %d. " + "Resetting to active\n", ehci->pstate); + ehci->pstate = EST_ACTIVE; + } +} + +static void ehci_frame_timer(void *opaque) +{ + EHCIState *ehci = opaque; + int64_t expire_time, t_now; + int usec_elapsed; + int frames; + int usec_now; + int i; + int skipped_frames = 0; + + + t_now = qemu_get_clock_ns(vm_clock); + expire_time = t_now + (get_ticks_per_sec() / FRAME_TIMER_FREQ); + if (expire_time == t_now) { + expire_time++; + } + + usec_now = t_now / 1000; + usec_elapsed = usec_now - ehci->last_run_usec; + frames = usec_elapsed / FRAME_TIMER_USEC; + ehci->frame_end_usec = usec_now + FRAME_TIMER_USEC - 10; + + for (i = 0; i < frames; i++) { + if ( !(ehci->usbsts & USBSTS_HALT)) { + if (ehci->isoch_pause <= 0) { + ehci->frindex += 8; + } + + if (ehci->frindex > 0x00001fff) { + ehci->frindex = 0; + ehci_set_interrupt(ehci, USBSTS_FLR); + } + + ehci->sofv = (ehci->frindex - 1) >> 3; + ehci->sofv &= 0x000003ff; + } + + if (frames - i > 10) { + skipped_frames++; + } else { + // TODO could this cause periodic frames to get skipped if async + // active? + if (ehci->astate != EST_EXECUTING) { + ehci_advance_periodic_state(ehci); + } + } + + ehci->last_run_usec += FRAME_TIMER_USEC; + } + +#if 0 + if (skipped_frames) { + DPRINTF("WARNING - EHCI skipped %d frames\n", skipped_frames); + } +#endif + + /* Async is not inside loop since it executes everything it can once + * called + */ + if (ehci->pstate != EST_EXECUTING) { + ehci_advance_async_state(ehci); + } + + qemu_mod_timer(ehci->frame_timer, expire_time); +} + +static CPUReadMemoryFunc *ehci_readfn[3]={ + ehci_mem_readb, + ehci_mem_readw, + ehci_mem_readl +}; + +static CPUWriteMemoryFunc *ehci_writefn[3]={ + ehci_mem_writeb, + ehci_mem_writew, + ehci_mem_writel +}; + +static void ehci_map(PCIDevice *pci_dev, int region_num, + pcibus_t addr, pcibus_t size, int type) +{ + EHCIState *s =(EHCIState *)pci_dev; + + DPRINTF("ehci_map: region %d, addr %08" PRIx64 ", size %" PRId64 ", s->mem %08X\n", + region_num, addr, size, s->mem); + s->mem_base = addr; + cpu_register_physical_memory(addr, size, s->mem); +} + +static int usb_ehci_initfn(PCIDevice *dev); + +static USBPortOps ehci_port_ops = { + .attach = ehci_attach, + .detach = ehci_detach, + .complete = ehci_async_complete_packet, +}; + +static PCIDeviceInfo ehci_info = { + .qdev.name = "usb-ehci", + .qdev.size = sizeof(EHCIState), + .init = usb_ehci_initfn, +}; + +static int usb_ehci_initfn(PCIDevice *dev) +{ + EHCIState *s = DO_UPCAST(EHCIState, dev, dev); + uint8_t *pci_conf = s->dev.config; + int i; + + pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL); + pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82801D); + pci_set_byte(&pci_conf[PCI_REVISION_ID], 0x10); + pci_set_byte(&pci_conf[PCI_CLASS_PROG], 0x20); + pci_config_set_class(pci_conf, PCI_CLASS_SERIAL_USB); + pci_set_byte(&pci_conf[PCI_HEADER_TYPE], PCI_HEADER_TYPE_NORMAL); + + /* capabilities pointer */ + pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x00); + //pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x50); + + pci_set_byte(&pci_conf[PCI_INTERRUPT_PIN], 4); // interrupt pin 3 + pci_set_byte(&pci_conf[PCI_MIN_GNT], 0); + pci_set_byte(&pci_conf[PCI_MAX_LAT], 0); + + // pci_conf[0x50] = 0x01; // power management caps + + pci_set_byte(&pci_conf[0x60], 0x20); // spec release number (2.1.4) + pci_set_byte(&pci_conf[0x61], 0x20); // frame length adjustment (2.1.5) + pci_set_word(&pci_conf[0x62], 0x00); // port wake up capability (2.1.6) + + pci_conf[0x64] = 0x00; + pci_conf[0x65] = 0x00; + pci_conf[0x66] = 0x00; + pci_conf[0x67] = 0x00; + pci_conf[0x68] = 0x01; + pci_conf[0x69] = 0x00; + pci_conf[0x6a] = 0x00; + pci_conf[0x6b] = 0x00; // USBLEGSUP + pci_conf[0x6c] = 0x00; + pci_conf[0x6d] = 0x00; + pci_conf[0x6e] = 0x00; + pci_conf[0x6f] = 0xc0; // USBLEFCTLSTS + + // 2.2 host controller interface version + s->mmio[0x00] = (uint8_t) OPREGBASE; + s->mmio[0x01] = 0x00; + s->mmio[0x02] = 0x00; + s->mmio[0x03] = 0x01; // HC version + s->mmio[0x04] = NB_PORTS; // Number of downstream ports + s->mmio[0x05] = 0x00; // No companion ports at present + s->mmio[0x06] = 0x00; + s->mmio[0x07] = 0x00; + s->mmio[0x08] = 0x80; // We can cache whole frame, not 64-bit capable + s->mmio[0x09] = 0x68; // EECP + s->mmio[0x0a] = 0x00; + s->mmio[0x0b] = 0x00; + + s->irq = s->dev.irq[3]; + + usb_bus_new(&s->bus, &s->dev.qdev); + for(i = 0; i < NB_PORTS; i++) { + usb_register_port(&s->bus, &s->ports[i], s, i, &ehci_port_ops, + USB_SPEED_MASK_HIGH); + usb_port_location(&s->ports[i], NULL, i+1); + s->ports[i].dev = 0; + } + + s->frame_timer = qemu_new_timer_ns(vm_clock, ehci_frame_timer, s); + + qemu_register_reset(ehci_reset, s); + + s->mem = cpu_register_io_memory(ehci_readfn, ehci_writefn, s, + DEVICE_LITTLE_ENDIAN); + + pci_register_bar(&s->dev, 0, MMIO_SIZE, PCI_BASE_ADDRESS_SPACE_MEMORY, + ehci_map); + + fprintf(stderr, "*** EHCI support is under development ***\n"); + + return 0; +} + +static void ehci_register(void) +{ + pci_qdev_register(&ehci_info); +} +device_init(ehci_register); + +/* + * vim: expandtab ts=4 + */ -- 2.7.4