From eddac8e9fe80c020fa86d462cd616ba4d4f9f6a5 Mon Sep 17 00:00:00 2001 From: Liam Beguin Date: Mon, 27 Mar 2017 11:11:36 -0400 Subject: [PATCH] i2c: lpc32xx: Factor out i2c_adapter parameter This is part of the prep work for the migration to the driver model. It will enable the driver to support DM and non-DM configurations using the same functions. Signed-off-by: Liam Beguin Signed-off-by: Sylvain Lemieux --- drivers/i2c/lpc32xx_i2c.c | 107 +++++++++++++++++++++++----------------------- 1 file changed, 53 insertions(+), 54 deletions(-) diff --git a/drivers/i2c/lpc32xx_i2c.c b/drivers/i2c/lpc32xx_i2c.c index e5dfdfe..f5225f3 100644 --- a/drivers/i2c/lpc32xx_i2c.c +++ b/drivers/i2c/lpc32xx_i2c.c @@ -29,7 +29,7 @@ #endif /* i2c register set */ -struct lpc32xx_i2c_registers { +struct lpc32xx_i2c_base { union { u32 rx; u32 tx; @@ -61,15 +61,15 @@ struct lpc32xx_i2c_registers { #define LPC32XX_I2C_STAT_NAI 0x00000004 #define LPC32XX_I2C_STAT_TDI 0x00000001 -static struct lpc32xx_i2c_registers *lpc32xx_i2c[] = { - (struct lpc32xx_i2c_registers *)I2C1_BASE, - (struct lpc32xx_i2c_registers *)I2C2_BASE, - (struct lpc32xx_i2c_registers *)(USB_BASE + 0x300) +static struct lpc32xx_i2c_base *lpc32xx_i2c[] = { + (struct lpc32xx_i2c_base *)I2C1_BASE, + (struct lpc32xx_i2c_base *)I2C2_BASE, + (struct lpc32xx_i2c_base *)(USB_BASE + 0x300) }; /* Set I2C bus speed */ -static unsigned int __i2c_set_bus_speed(struct i2c_adapter *adap, - unsigned int speed) +static unsigned int __i2c_set_bus_speed(struct lpc32xx_i2c_base *base, + unsigned int speed, unsigned int chip) { int half_period; @@ -77,7 +77,7 @@ static unsigned int __i2c_set_bus_speed(struct i2c_adapter *adap, return -EINVAL; /* OTG I2C clock source and CLK registers are different */ - if (adap->hwadapnr == 2) { + if (chip == 2) { half_period = (get_periph_clk_rate() / speed) / 2; if (half_period > 0xFF) return -EINVAL; @@ -87,38 +87,35 @@ static unsigned int __i2c_set_bus_speed(struct i2c_adapter *adap, return -EINVAL; } - writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_hi); - writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_lo); + writel(half_period, &base->clk_hi); + writel(half_period, &base->clk_lo); return 0; } /* I2C init called by cmd_i2c when doing 'i2c reset'. */ -static void __i2c_init(struct i2c_adapter *adap, - int requested_speed, int slaveadd) +static void __i2c_init(struct lpc32xx_i2c_base *base, + int requested_speed, int slaveadd, unsigned int chip) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; - /* soft reset (auto-clears) */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); /* set HI and LO periods for half of the default speed */ - __i2c_set_bus_speed(adap, requested_speed); + __i2c_set_bus_speed(base, requested_speed, chip); } /* I2C probe called by cmd_i2c when doing 'i2c probe'. */ -static int __i2c_probe_chip(struct i2c_adapter *adap, u8 dev) +static int __i2c_probe_chip(struct lpc32xx_i2c_base *base, u8 dev) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat; /* Soft-reset the controller */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); - while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); + while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* Addre slave for write with start before and stop after */ writel((dev<<1) | LPC32XX_I2C_TX_START | LPC32XX_I2C_TX_STOP, - &i2c->tx); + &base->tx); /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* was there no acknowledge? */ return (stat & LPC32XX_I2C_STAT_NAI) ? -1 : 0; @@ -128,20 +125,19 @@ static int __i2c_probe_chip(struct i2c_adapter *adap, u8 dev) * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c * Begin write, send address byte(s), begin read, receive data bytes, end. */ -static int __i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, - int alen, u8 *data, int length) +static int __i2c_read(struct lpc32xx_i2c_base *base, u8 dev, uint addr, + int alen, u8 *data, int length) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat, wlen; /* Soft-reset the controller */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); - while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); + while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* do we need to write an address at all? */ if (alen) { /* Address slave in write mode */ - writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); + writel((dev<<1) | LPC32XX_I2C_TX_START, &base->tx); /* write address bytes */ while (alen--) { /* compute address byte + stop for the last one */ @@ -149,44 +145,44 @@ static int __i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, if (!alen) a |= LPC32XX_I2C_TX_STOP; /* Send address byte */ - writel(a, &i2c->tx); + writel(a, &base->tx); } /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ - writel(1, &i2c->stat); + writel(1, &base->stat); } /* do we have to read data at all? */ if (length) { /* Address slave in read mode */ - writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); + writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &base->tx); wlen = length; /* get data */ while (length | wlen) { /* read status for TFF and RFE */ - stat = readl(&i2c->stat); + stat = readl(&base->stat); /* must we, can we write a trigger byte? */ if ((wlen > 0) & (!(stat & LPC32XX_I2C_STAT_TFF))) { wlen--; /* write trigger byte + stop if last */ writel(wlen ? 0 : - LPC32XX_I2C_TX_STOP, &i2c->tx); + LPC32XX_I2C_TX_STOP, &base->tx); } /* must we, can we read a data byte? */ if ((length > 0) & (!(stat & LPC32XX_I2C_STAT_RFE))) { length--; /* read byte */ - *(data++) = readl(&i2c->rx); + *(data++) = readl(&base->rx); } } /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ - writel(1, &i2c->stat); + writel(1, &base->stat); } /* success */ return 0; @@ -196,38 +192,37 @@ static int __i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c * Begin write, send address byte(s), send data bytes, end. */ -static int __i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, - int alen, u8 *data, int length) +static int __i2c_write(struct lpc32xx_i2c_base *base, u8 dev, uint addr, + int alen, u8 *data, int length) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat; /* Soft-reset the controller */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); - while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); + while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* do we need to write anything at all? */ if (alen | length) /* Address slave in write mode */ - writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); + writel((dev<<1) | LPC32XX_I2C_TX_START, &base->tx); else return 0; /* write address bytes */ while (alen) { /* wait for transmit fifo not full */ - stat = readl(&i2c->stat); + stat = readl(&base->stat); if (!(stat & LPC32XX_I2C_STAT_TFF)) { alen--; int a = (addr >> (8 * alen)) & 0xff; if (!(alen | length)) a |= LPC32XX_I2C_TX_STOP; /* Send address byte */ - writel(a, &i2c->tx); + writel(a, &base->tx); } } while (length) { /* wait for transmit fifo not full */ - stat = readl(&i2c->stat); + stat = readl(&base->stat); if (!(stat & LPC32XX_I2C_STAT_TFF)) { /* compute data byte, add stop if length==0 */ length--; @@ -235,44 +230,48 @@ static int __i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, if (!length) d |= LPC32XX_I2C_TX_STOP; /* Send data byte */ - writel(d, &i2c->tx); + writel(d, &base->tx); } } /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ - writel(1, &i2c->stat); + writel(1, &base->stat); return 0; } static void lpc32xx_i2c_init(struct i2c_adapter *adap, int requested_speed, int slaveadd) { - __i2c_init(adap, requested_speed, slaveadd); + __i2c_init(lpc32xx_i2c[adap->hwadapnr], requested_speed, slaveadd, + adap->hwadapnr); } static int lpc32xx_i2c_probe_chip(struct i2c_adapter *adap, u8 dev) { - return __i2c_probe_chip(adap, dev); + return __i2c_probe_chip(lpc32xx_i2c[adap->hwadapnr], dev); } static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data, int length) { - return __i2c_read(adap, dev, addr, alen, data, length); + return __i2c_read(lpc32xx_i2c[adap->hwadapnr], dev, addr, + alen, data, length); } static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data, int length) { - return __i2c_write(adap, dev, addr, alen, data, length); + return __i2c_write(lpc32xx_i2c[adap->hwadapnr], dev, addr, + alen, data, length); } static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap, unsigned int speed) { - return __i2c_set_bus_speed(adap, speed); + return __i2c_set_bus_speed(lpc32xx_i2c[adap->hwadapnr], speed, + adap->hwadapnr); } U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_0, lpc32xx_i2c_init, lpc32xx_i2c_probe_chip, -- 2.7.4