From ed87d33ddbcd9a1c3b5ae87995da34e6f51a862c Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 6 Apr 2020 15:20:15 +0100 Subject: [PATCH] staging: comedi: dt2815: fix writing hi byte of analog output The DT2815 analog output command is 16 bits wide, consisting of the 12-bit sample value in bits 15 to 4, the channel number in bits 3 to 1, and a voltage or current selector in bit 0. Both bytes of the 16-bit command need to be written in turn to a single 8-bit data register. However, the driver currently only writes the low 8-bits. It is broken and appears to have always been broken. Electronic copies of the DT2815 User's Manual seem impossible to find online, but looking at the source code, a best guess for the sequence the driver intended to use to write the analog output command is as follows: 1. Wait for the status register to read 0x00. 2. Write the low byte of the command to the data register. 3. Wait for the status register to read 0x80. 4. Write the high byte of the command to the data register. Step 4 is missing from the driver. Add step 4 to (hopefully) fix the driver. Also add a "FIXME" comment about setting bit 0 of the low byte of the command. Supposedly, it is used to choose between voltage output and current output, but the current driver always sets it to 1. Signed-off-by: Ian Abbott Cc: stable Link: https://lore.kernel.org/r/20200406142015.126982-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt2815.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c index 83026ba..78a7c1b 100644 --- a/drivers/staging/comedi/drivers/dt2815.c +++ b/drivers/staging/comedi/drivers/dt2815.c @@ -92,6 +92,7 @@ static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s, int ret; for (i = 0; i < insn->n; i++) { + /* FIXME: lo bit 0 chooses voltage output or current output */ lo = ((data[i] & 0x0f) << 4) | (chan << 1) | 0x01; hi = (data[i] & 0xff0) >> 4; @@ -105,6 +106,8 @@ static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s, if (ret) return ret; + outb(hi, dev->iobase + DT2815_DATA); + devpriv->ao_readback[chan] = data[i]; } return i; -- 2.7.4