From ed7bda57104e236ab7edc5f0c3955955b3882387 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Mon, 7 Nov 2022 22:22:37 +0100 Subject: [PATCH] imx8ulp: synchronise device tree with linux Synchronise device tree with linux v6.1-rc3. Signed-off-by: Marcel Ziswiler --- arch/arm/dts/imx8ulp-evk-u-boot.dtsi | 15 +- arch/arm/dts/imx8ulp-evk.dts | 240 ++----- arch/arm/dts/imx8ulp-pinfunc.h | 4 +- arch/arm/dts/imx8ulp.dtsi | 594 +++++------------- include/dt-bindings/clock/imx8ulp-clock.h | 53 +- include/dt-bindings/power/imx8ulp-power.h | 26 + include/dt-bindings/reset/imx8ulp-pcc-reset.h | 59 ++ 7 files changed, 369 insertions(+), 622 deletions(-) create mode 100644 include/dt-bindings/power/imx8ulp-power.h create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h diff --git a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi index 7c1dab2acf..ad264f271e 100644 --- a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi @@ -3,7 +3,16 @@ * Copyright 2021 NXP */ -&{/soc@0} { +/ { + mu@27020000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0 0x27020000 0 0x10000>; + status = "okay"; + u-boot,dm-spl; + }; +}; + +&soc { u-boot,dm-spl; }; @@ -23,10 +32,6 @@ u-boot,dm-spl; }; -&s400_mu { - u-boot,dm-spl; -}; - &lpuart5 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8ulp-evk.dts b/arch/arm/dts/imx8ulp-evk.dts index da09ff48ff..f1c6d933a1 100644 --- a/arch/arm/dts/imx8ulp-evk.dts +++ b/arch/arm/dts/imx8ulp-evk.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2021 NXP */ @@ -8,17 +8,31 @@ #include "imx8ulp.dtsi" / { - model = "FSL i.MX8ULP EVK"; + model = "NXP i.MX8ULP EVK"; compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp"; chosen { stdout-path = &lpuart5; - bootargs = "console=ttyLP1,115200 earlycon"; }; - usdhc2_pwrseq: usdhc2_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pcal6408 2 GPIO_ACTIVE_LOW>; + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>; + }; + + clock_ext_rmii: clock-ext-rmii { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "ext_rmii_clk"; + #clock-cells = <0>; + }; + + clock_ext_ts: clock-ext-ts { + compatible = "fixed-clock"; + /* External ts clock is 50MHZ from PHY on EVK board. */ + clock-frequency = <50000000>; + clock-output-names = "ext_ts_clk"; + #clock-cells = <0>; }; }; @@ -30,161 +44,30 @@ status = "okay"; }; -&iomuxc1 { - pinctrl_lpuart5: lpuart5grp { - fsl,pins = < - MX8ULP_PAD_PTF14__LPUART5_TX 0x03 - MX8ULP_PAD_PTF15__LPUART5_RX 0x03 - >; - }; - - pinctrl_lpi2c7: lpi2c7grp { - fsl,pins = < - MX8ULP_PAD_PTE12__LPI2C7_SCL 0x27 - MX8ULP_PAD_PTE13__LPI2C7_SDA 0x27 - >; - }; - - pinctrl_usdhc0: usdhc0grp { - fsl,pins = < - MX8ULP_PAD_PTD0__SDHC0_RESET_B 0x43 - MX8ULP_PAD_PTD1__SDHC0_CMD 0x43 - MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042 - MX8ULP_PAD_PTD10__SDHC0_D0 0x43 - MX8ULP_PAD_PTD9__SDHC0_D1 0x43 - MX8ULP_PAD_PTD8__SDHC0_D2 0x43 - MX8ULP_PAD_PTD7__SDHC0_D3 0x43 - MX8ULP_PAD_PTD6__SDHC0_D4 0x43 - MX8ULP_PAD_PTD5__SDHC0_D5 0x43 - MX8ULP_PAD_PTD4__SDHC0_D6 0x43 - MX8ULP_PAD_PTD3__SDHC0_D7 0x43 - MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042 - >; - }; - - pinctrl_usdhc2_pte: usdhc2ptegrp { - fsl,pins = < - MX8ULP_PAD_PTE1__SDHC2_D0 0x43 - MX8ULP_PAD_PTE0__SDHC2_D1 0x43 - MX8ULP_PAD_PTE5__SDHC2_D2 0x43 - MX8ULP_PAD_PTE4__SDHC2_D3 0x43 - MX8ULP_PAD_PTE2__SDHC2_CLK 0x10042 - MX8ULP_PAD_PTE3__SDHC2_CMD 0x43 - MX8ULP_PAD_PTE7__PTE7 0x10003 - >; - }; - - pinctrl_fec: fecgrp { - fsl,pins = < - MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 - MX8ULP_PAD_PTE15__ENET0_MDC 0x43 - MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 - MX8ULP_PAD_PTE17__ENET0_RXER 0x43 - MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 - MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 - MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 - MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 - MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 - MX8ULP_PAD_PTE19__ENET0_REFCLK 0x10043 - MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x10043 - >; - }; - - pinctrl_usbotg0_id: otg0idgrp { - fsl,pins = < - MX8ULP_PAD_PTF2__USB0_ID 0x10003 - >; - }; - - pinctrl_usbotg1_id: otg1idgrp { - fsl,pins = < - MX8ULP_PAD_PTD23__USB1_ID 0x10003 - >; - }; -}; - &usdhc0 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_usdhc0>; pinctrl-1 = <&pinctrl_usdhc0>; - pinctrl-2 = <&pinctrl_usdhc0>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc2_pte>; - pinctrl-1 = <&pinctrl_usdhc2_pte>; - pinctrl-2 = <&pinctrl_usdhc2_pte>; - pinctrl-3 = <&pinctrl_usdhc2_pte>; - mmc-pwrseq = <&usdhc2_pwrseq>; - max-frequency = <100000000>; - bus-width = <4>; - keep-power-in-suspend; non-removable; - wakeup-source; - status = "okay"; - - wifi_wake_host { - compatible = "nxp,wifi-wake-host"; - interrupt-parent = <&gpioe>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "host-wake"; - }; -}; - -&lpi2c7 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpi2c7>; - status = "okay"; - - pcal6408: gpio@21 { - compatible = "ti,tca6408"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&flexspi0 { - status = "okay"; - - flash0: atxp032@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <66000000>; - }; -}; - -&flexspi2 { + bus-width = <8>; status = "okay"; - - flash1: mt35xu512aba@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <29000000>; - spi-nor,ddr-quad-read-dummy = <8>; - }; }; &fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_enet>; + pinctrl-1 = <&pinctrl_enet>; + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&pcc4 IMX8ULP_CLK_ENET>, + <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>, + <&clock_ext_rmii>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>; + assigned-clock-parents = <&clock_ext_ts>; phy-mode = "rmii"; phy-handle = <ðphy>; status = "okay"; - phy-reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>; - mdio { #address-cells = <1>; #size-cells = <0>; @@ -196,28 +79,43 @@ }; }; -&usbotg0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg0_id>; - srp-disable; - hnp-disable; - adp-disable; - status = "okay"; -}; - -&usbphy0 { - fsl,tx-d-cal = <88>; -}; +&iomuxc1 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX8ULP_PAD_PTE15__ENET0_MDC 0x43 + MX8ULP_PAD_PTE14__ENET0_MDIO 0x43 + MX8ULP_PAD_PTE17__ENET0_RXER 0x43 + MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43 + MX8ULP_PAD_PTF1__ENET0_RXD0 0x43 + MX8ULP_PAD_PTE20__ENET0_RXD1 0x43 + MX8ULP_PAD_PTE16__ENET0_TXEN 0x43 + MX8ULP_PAD_PTE23__ENET0_TXD0 0x43 + MX8ULP_PAD_PTE22__ENET0_TXD1 0x43 + MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43 + MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43 + >; + }; -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_id>; - srp-disable; - hnp-disable; - adp-disable; - status = "okay"; -}; + pinctrl_lpuart5: lpuart5grp { + fsl,pins = < + MX8ULP_PAD_PTF14__LPUART5_TX 0x3 + MX8ULP_PAD_PTF15__LPUART5_RX 0x3 + >; + }; -&usbphy1 { - fsl,tx-d-cal = <88>; + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MX8ULP_PAD_PTD1__SDHC0_CMD 0x43 + MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042 + MX8ULP_PAD_PTD10__SDHC0_D0 0x43 + MX8ULP_PAD_PTD9__SDHC0_D1 0x43 + MX8ULP_PAD_PTD8__SDHC0_D2 0x43 + MX8ULP_PAD_PTD7__SDHC0_D3 0x43 + MX8ULP_PAD_PTD6__SDHC0_D4 0x43 + MX8ULP_PAD_PTD5__SDHC0_D5 0x43 + MX8ULP_PAD_PTD4__SDHC0_D6 0x43 + MX8ULP_PAD_PTD3__SDHC0_D7 0x43 + MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042 + >; + }; }; diff --git a/arch/arm/dts/imx8ulp-pinfunc.h b/arch/arm/dts/imx8ulp-pinfunc.h index c21c3b644e..b204ac79b4 100644 --- a/arch/arm/dts/imx8ulp-pinfunc.h +++ b/arch/arm/dts/imx8ulp-pinfunc.h @@ -1,6 +1,6 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ /* - * Copyright 2020 NXP + * Copyright 2021 NXP */ #ifndef __DTS_IMX8ULP_PINFUNC_H diff --git a/arch/arm/dts/imx8ulp.dtsi b/arch/arm/dts/imx8ulp.dtsi index d3b16bd2fe..06ce5f19aa 100644 --- a/arch/arm/dts/imx8ulp.dtsi +++ b/arch/arm/dts/imx8ulp.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2021 NXP */ @@ -6,6 +6,8 @@ #include #include #include +#include + #include "imx8ulp-pinfunc.h" / { @@ -14,49 +16,29 @@ #size-cells = <2>; aliases { + ethernet0 = &fec; gpio0 = &gpiod; gpio1 = &gpioe; gpio2 = &gpiof; - serial0 = &lpuart5; mmc0 = &usdhc0; mmc1 = &usdhc1; mmc2 = &usdhc2; - spi0 = &flexspi0; - spi2 = &flexspi2; - ethernet0 = &fec; - i2c7 = &lpi2c7; - usbphy0 = &usbphy0; - usb0 = &usbotg0; - usbphy1 = &usbphy1; - usb1 = &usbotg1; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; }; - cpus: cpus { + cpus { #address-cells = <2>; #size-cells = <0>; - idle-states { - entry-method = "psci"; - - CPU_SLEEP: cpu-sleep { - compatible = "arm,idle-state"; - arm,psci-suspend-param = <0x0010033>; - local-timer-stop; - entry-latency-us = <1000>; - exit-latency-us = <700>; - min-residency-us = <2700>; - wakeup-latency-us = <1500>; - }; - }; - - /* We have 1 clusters with 4 Cortex-A35 cores */ A35_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a35"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>; }; A35_1: cpu@1 { @@ -65,7 +47,6 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>; }; A35_L2: l2-cache0 { @@ -73,37 +54,6 @@ }; }; - a35_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-504000000 { - opp-hz = /bits/ 64 <504000000>; - opp-microvolt = <800000>; - clock-latency-ns = <150000>; - }; - - opp-744000000 { - opp-hz = /bits/ 64 <744000000>; - opp-microvolt = <900000>; - clock-latency-ns = <150000>; - }; - - opp-1008000000 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <150000>; - opp-suspend; - }; - }; - - s400_mu: mu@27020000 { - u-boot,dm-spl; - compatible = "fsl,imx8ulp-mu"; - reg = <0 0x27020000 0 0x10000>; - status = "okay"; - }; - gic: interrupt-controller@2d400000 { compatible = "arm,gic-v3"; reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */ @@ -113,6 +63,14 @@ interrupts = ; }; + pmu { + compatible = "arm,cortex-a35-pmu"; + interrupt-parent = <&gic>; + interrupts = ; + interrupt-affinity = <&A35_0>, <&A35_1>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -154,7 +112,7 @@ #clock-cells = <0>; }; - sram@0x2201f000 { + sram@2201f000 { compatible = "mmio-sram"; reg = <0x0 0x2201f000 0x0 0x1000>; @@ -162,10 +120,9 @@ #size-cells = <1>; ranges = <0 0x0 0x2201f000 0x1000>; - /* TODO: split or unify */ - scmi_pd: scmi_pd@0 { + scmi_buf: scmi-sram-section@0 { compatible = "arm,scmi-shmem"; - reg = <0x0 0x200>; + reg = <0x0 0x400>; }; }; @@ -175,41 +132,31 @@ arm,smc-id = <0xc20000fe>; #address-cells = <1>; #size-cells = <0>; - shmem = <&scmi_pd>; + shmem = <&scmi_buf>; scmi_devpd: protocol@11 { reg = <0x11>; #power-domain-cells = <1>; }; - scmi_perf: protocol@13 { - reg = <0x13>; + scmi_sensor: protocol@15 { + reg = <0x15>; + #thermal-sensor-cells = <1>; }; }; }; - soc@0 { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x80000000>; + ranges = <0x0 0x0 0x0 0x40000000>; - per_bridge0: bus@28000000 { - compatible = "simple-bus"; - reg = <0x28000000 0x800000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - flexspi0: flexspi@28039000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,imx8ulp-fspi"; - reg = <0x28039000 0x10000>, - <0x04000000 0x7ffffff>; - reg-names = "fspi_base", "fspi_mmap"; - status = "disabled"; - }; + s4muap: mailbox@27020000 { + compatible = "fsl,imx8ulp-mu-s4"; + reg = <0x27020000 0x10000>; + interrupts = ; + #mbox-cells = <2>; }; per_bridge3: bus@29000000 { @@ -219,110 +166,21 @@ #size-cells = <1>; ranges; - edma1: dma-controller@29010000 { - compatible = "fsl,imx8ulp-edma"; - reg = <0x29010000 0x10000>, - <0x29020000 0x10000>, <0x29030000 0x10000>, - <0x29040000 0x10000>, <0x29050000 0x10000>, - <0x29060000 0x10000>, <0x29070000 0x10000>, - <0x29080000 0x10000>, <0x29090000 0x10000>, - <0x290a0000 0x10000>, <0x290b0000 0x10000>, - <0x290c0000 0x10000>, <0x290d0000 0x10000>, - <0x290e0000 0x10000>, <0x290f0000 0x10000>, - <0x29100000 0x10000>, <0x29110000 0x10000>, - <0x29120000 0x10000>, <0x29130000 0x10000>, - <0x29140000 0x10000>, <0x29150000 0x10000>, - <0x29160000 0x10000>, <0x29170000 0x10000>, - <0x29180000 0x10000>, <0x29190000 0x10000>, - <0x291a0000 0x10000>, <0x291b0000 0x10000>, - <0x291c0000 0x10000>, <0x291d0000 0x10000>, - <0x291e0000 0x10000>, <0x291f0000 0x10000>, - <0x29200000 0x10000>, <0x29210000 0x10000>; - #dma-cells = <3>; - dma-channels = <32>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - interrupt-names = "edma1-chan0-tx", "edma1-chan1-tx", - "edma1-chan2-tx", "edma1-chan3-tx", - "edma1-chan4-tx", "edma1-chan5-tx", - "edma1-chan6-tx", "edma1-chan7-tx", - "edma1-chan8-tx", "edma1-chan9-tx", - "edma1-chan10-tx", "edma1-chan11-tx", - "edma1-chan12-tx", "edma1-chan13-tx", - "edma1-chan14-tx", "edma1-chan15-tx", - "edma1-chan16-tx", "edma1-chan17-tx", - "edma1-chan18-tx", "edma1-chan19-tx", - "edma1-chan20-tx", "edma1-chan21-tx", - "edma1-chan22-tx", "edma1-chan23-tx", - "edma1-chan24-tx", "edma1-chan25-tx", - "edma1-chan26-tx", "edma1-chan27-tx", - "edma1-chan28-tx", "edma1-chan29-tx", - "edma1-chan30-tx", "edma1-chan31-tx"; - clocks = <&pcc3 IMX8ULP_CLK_DMA1_MP>, - <&pcc3 IMX8ULP_CLK_DMA1_CH0>, <&pcc3 IMX8ULP_CLK_DMA1_CH1>, - <&pcc3 IMX8ULP_CLK_DMA1_CH2>, <&pcc3 IMX8ULP_CLK_DMA1_CH3>, - <&pcc3 IMX8ULP_CLK_DMA1_CH4>, <&pcc3 IMX8ULP_CLK_DMA1_CH5>, - <&pcc3 IMX8ULP_CLK_DMA1_CH6>, <&pcc3 IMX8ULP_CLK_DMA1_CH7>, - <&pcc3 IMX8ULP_CLK_DMA1_CH8>, <&pcc3 IMX8ULP_CLK_DMA1_CH9>, - <&pcc3 IMX8ULP_CLK_DMA1_CH10>, <&pcc3 IMX8ULP_CLK_DMA1_CH11>, - <&pcc3 IMX8ULP_CLK_DMA1_CH12>, <&pcc3 IMX8ULP_CLK_DMA1_CH13>, - <&pcc3 IMX8ULP_CLK_DMA1_CH14>, <&pcc3 IMX8ULP_CLK_DMA1_CH15>, - <&pcc3 IMX8ULP_CLK_DMA1_CH16>, <&pcc3 IMX8ULP_CLK_DMA1_CH17>, - <&pcc3 IMX8ULP_CLK_DMA1_CH18>, <&pcc3 IMX8ULP_CLK_DMA1_CH19>, - <&pcc3 IMX8ULP_CLK_DMA1_CH20>, <&pcc3 IMX8ULP_CLK_DMA1_CH21>, - <&pcc3 IMX8ULP_CLK_DMA1_CH22>, <&pcc3 IMX8ULP_CLK_DMA1_CH23>, - <&pcc3 IMX8ULP_CLK_DMA1_CH24>, <&pcc3 IMX8ULP_CLK_DMA1_CH25>, - <&pcc3 IMX8ULP_CLK_DMA1_CH26>, <&pcc3 IMX8ULP_CLK_DMA1_CH27>, - <&pcc3 IMX8ULP_CLK_DMA1_CH28>, <&pcc3 IMX8ULP_CLK_DMA1_CH29>, - <&pcc3 IMX8ULP_CLK_DMA1_CH30>, <&pcc3 IMX8ULP_CLK_DMA1_CH31>; - clock-names = "edma-mp-clk", - "edma1-chan0-clk", "edma1-chan1-clk", - "edma1-chan2-clk", "edma1-chan3-clk", - "edma1-chan4-clk", "edma1-chan5-clk", - "edma1-chan6-clk", "edma1-chan7-clk", - "edma1-chan8-clk", "edma1-chan9-clk", - "edma1-chan10-clk", "edma1-chan11-clk", - "edma1-chan12-clk", "edma1-chan13-clk", - "edma1-chan14-clk", "edma1-chan15-clk", - "edma1-chan16-clk", "edma1-chan17-clk", - "edma1-chan18-clk", "edma1-chan19-clk", - "edma1-chan20-clk", "edma1-chan21-clk", - "edma1-chan22-clk", "edma1-chan23-clk", - "edma1-chan24-clk", "edma1-chan25-clk", - "edma1-chan26-clk", "edma1-chan27-clk", - "edma1-chan28-clk", "edma1-chan29-clk", - "edma1-chan30-clk", "edma1-chan31-clk"; - status = "okay"; + mu: mailbox@29220000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0x29220000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu3: mailbox@29230000 { + compatible = "fsl,imx8ulp-mu"; + reg = <0x29230000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX8ULP_CLK_MU3_A>; + #mbox-cells = <2>; + status = "disabled"; }; wdog3: watchdog@292a0000 { @@ -331,15 +189,13 @@ interrupts = ; clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; - assigned-clocks-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>; timeout-sec = <40>; }; cgc1: clock-controller@292c0000 { compatible = "fsl,imx8ulp-cgc1"; reg = <0x292c0000 0x10000>; - clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; - clock-names = "rosc", "sosc", "frosc", "lposc"; #clock-cells = <1>; }; @@ -347,6 +203,7 @@ compatible = "fsl,imx8ulp-pcc3"; reg = <0x292d0000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; tpm5: tpm@29340000 { @@ -356,6 +213,33 @@ clocks = <&pcc3 IMX8ULP_CLK_TPM5>, <&pcc3 IMX8ULP_CLK_TPM5>; clock-names = "ipg", "per"; + status = "disabled"; + }; + + lpi2c4: i2c@29370000 { + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x29370000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>, + <&pcc3 IMX8ULP_CLK_LPI2C4>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c5: i2c@29380000 { + compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x29380000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>, + <&pcc3 IMX8ULP_CLK_LPI2C5>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; + status = "disabled"; }; lpuart4: serial@29390000 { @@ -370,10 +254,41 @@ lpuart5: serial@293a0000 { compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x293a0000 0x1000>; + interrupts = ; clocks = <&pcc3 IMX8ULP_CLK_LPUART5>; clock-names = "ipg"; status = "disabled"; }; + + lpspi4: spi@293b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi"; + reg = <0x293b0000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>, + <&pcc3 IMX8ULP_CLK_LPSPI4>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpspi5: spi@293c0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi"; + reg = <0x293c0000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>, + <&pcc3 IMX8ULP_CLK_LPSPI5>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; }; per_bridge4: bus@29800000 { @@ -387,77 +302,84 @@ compatible = "fsl,imx8ulp-pcc4"; reg = <0x29800000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; - lpi2c6: lpi2c6@29840000 { + lpi2c6: i2c@29840000 { compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x29840000 0x10000>; interrupts = ; clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>, <&pcc4 IMX8ULP_CLK_LPI2C6>; clock-names = "per", "ipg"; + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; status = "disabled"; }; - lpi2c7: lpi2c7@29850000 { + lpi2c7: i2c@29850000 { compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x29850000 0x10000>; interrupts = ; clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>, <&pcc4 IMX8ULP_CLK_LPI2C7>; clock-names = "per", "ipg"; + assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>; + assigned-clock-rates = <48000000>; status = "disabled"; }; - flexspi2: flexspi@29810000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,imx8ulp-fspi"; - reg = <0x29810000 0x10000>, - <0x60000000 0xfffffff>; - reg-names = "fspi_base", "fspi_mmap"; + lpuart6: serial@29860000 { + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x29860000 0x1000>; + interrupts = ; + clocks = <&pcc4 IMX8ULP_CLK_LPUART6>; + clock-names = "ipg"; status = "disabled"; }; - flexspi2_nand: flexspi2_nand@29810000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8-fspi-nand"; - reg = <0x29810000 0x10000>, <0x60000000 0x10000000>; - reg-names = "FlexSPI", "FlexSPI-memory"; + lpuart7: serial@29870000 { + compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x29870000 0x1000>; + interrupts = ; + clocks = <&pcc4 IMX8ULP_CLK_LPUART7>; + clock-names = "ipg"; status = "disabled"; }; iomuxc1: pinctrl@298c0000 { compatible = "fsl,imx8ulp-iomuxc1"; reg = <0x298c0000 0x10000>; - fsl,mux_mask = <0xf00>; }; usdhc0: mmc@298d0000 { - compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc"; + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x298d0000 0x10000>; interrupts = ; - clocks = <&cgc1 IMX8ULP_CLK_DUMMY>, - <&cgc1 IMX8ULP_CLK_DUMMY>, + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>, <&pcc4 IMX8ULP_CLK_USDHC0>; clock-names = "ipg", "ahb", "per"; + power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; usdhc1: mmc@298e0000 { - compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc"; + compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; reg = <0x298e0000 0x10000>; interrupts = ; - clocks = <&cgc1 IMX8ULP_CLK_DUMMY>, - <&cgc1 IMX8ULP_CLK_DUMMY>, + clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, + <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>, <&pcc4 IMX8ULP_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; + power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -470,117 +392,50 @@ <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>, <&pcc4 IMX8ULP_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD2>, <&pcc4 IMX8ULP_CLK_USDHC2>; - assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD2_DIV1>; - assigned-clock-rates = <396000000>, <396000000>; + power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; - usbotg0: usb@29900000 { - compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", - "fsl,imx27-usb"; - reg = <0x29900000 0x200>; - interrupts = ; - clocks = <&pcc4 IMX8ULP_CLK_USB0>; - fsl,usbphy = <&usbphy0>; - fsl,usbmisc = <&usbmisc0 0>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x8>; - rx-burst-size-dword = <0x8>; - status = "disabled"; - }; - - usbmisc0: usbmisc@29900200 { - #index-cells = <1>; - compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc", - "fsl,imx6q-usbmisc"; - reg = <0x29900200 0x200>; - }; - - usbphy0: usbphy@29910000 { - compatible = "fsl,imx8ulp-usbphy", - "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy"; - reg = <0x29910000 0x1000>; - interrupts = ; - clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>; - }; - - usbotg1: usb@29920000 { - compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", - "fsl,imx27-usb"; - reg = <0x29920000 0x200>; - interrupts = ; - clocks = <&pcc4 IMX8ULP_CLK_USB1>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc1 0>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x8>; - rx-burst-size-dword = <0x8>; - status = "disabled"; - }; - - usbmisc1: usbmisc@29920200 { - #index-cells = <1>; - compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc", - "fsl,imx6q-usbmisc"; - reg = <0x29920200 0x200>; - }; - - usbphy1: usbphy@29930000 { - compatible = "fsl,imx8ulp-usbphy", - "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy"; - reg = <0x29930000 0x1000>; - interrupts = ; - clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>; - }; - fec: ethernet@29950000 { - compatible = "fsl,imx8ulp-fec", "fsl,imx6sx-fec"; + compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x29950000 0x10000>; interrupts = ; - clocks = <&pcc4 IMX8ULP_CLK_ENET>, - <&pcc4 IMX8ULP_CLK_ENET>, - <&cgc1 IMX8ULP_CLK_ENETSTAMP_SEL>, - <&pcc4 IMX8ULP_CLK_ENET>, - <&pcc4 IMX8ULP_CLK_ENET>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues = <3>; - fsl,num-rx-queues = <3>; + interrupt-names = "int0"; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; status = "disabled"; }; - }; - gpioe: gpio@2d000000 { - compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; - reg = <0x2d000080 0x1000 0x2d000040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>, - <&pcc4 IMX8ULP_CLK_PCTLE>; - clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 32 24>; + gpioe: gpio@2d000080 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x2d000080 0x1000>, <0x2d000040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>, + <&pcc4 IMX8ULP_CLK_PCTLE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 32 24>; }; - gpiof: gpio@2d010000 { - compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; - reg = <0x2d010080 0x1000 0x2d010040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>, - <&pcc4 IMX8ULP_CLK_PCTLF>; - clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 64 24>; + gpiof: gpio@2d010080 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x2d010080 0x1000>, <0x2d010040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>, + <&pcc4 IMX8ULP_CLK_PCTLF>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 64 32>; }; per_bridge5: bus@2d800000 { @@ -590,117 +445,9 @@ #size-cells = <1>; ranges; - edma2: dma-controller@2d800000 { - compatible = "fsl,imx8ulp-edma"; - reg = <0x2d800000 0x10000>, - <0x2d810000 0x10000>, <0x2d820000 0x10000>, - <0x2d830000 0x10000>, <0x2d840000 0x10000>, - <0x2d850000 0x10000>, <0x2d860000 0x10000>, - <0x2d870000 0x10000>, <0x2d880000 0x10000>, - <0x2d890000 0x10000>, <0x2d8a0000 0x10000>, - <0x2d8b0000 0x10000>, <0x2d8c0000 0x10000>, - <0x2d8d0000 0x10000>, <0x2d8e0000 0x10000>, - <0x2d8f0000 0x10000>, <0x2d900000 0x10000>, - <0x2d910000 0x10000>, <0x2d920000 0x10000>, - <0x2d930000 0x10000>, <0x2d940000 0x10000>, - <0x2d950000 0x10000>, <0x2d960000 0x10000>, - <0x2d970000 0x10000>, <0x2d980000 0x10000>, - <0x2d990000 0x10000>, <0x2d9a0000 0x10000>, - <0x2d9b0000 0x10000>, <0x2d9c0000 0x10000>, - <0x2d9d0000 0x10000>, <0x2d9e0000 0x10000>, - <0x2d9f0000 0x10000>, <0x2da00000 0x10000>; - #dma-cells = <3>; - dma-channels = <32>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - interrupt-names = "edma2-chan0-tx", "edma2-chan1-tx", - "edma2-chan2-tx", "edma2-chan3-tx", - "edma2-chan4-tx", "edma2-chan5-tx", - "edma2-chan6-tx", "edma2-chan7-tx", - "edma2-chan8-tx", "edma2-chan9-tx", - "edma2-chan10-tx", "edma2-chan11-tx", - "edma2-chan12-tx", "edma2-chan13-tx", - "edma2-chan14-tx", "edma2-chan15-tx", - "edma2-chan16-tx", "edma2-chan17-tx", - "edma2-chan18-tx", "edma2-chan19-tx", - "edma2-chan20-tx", "edma2-chan21-tx", - "edma2-chan22-tx", "edma2-chan23-tx", - "edma2-chan24-tx", "edma2-chan25-tx", - "edma2-chan26-tx", "edma2-chan27-tx", - "edma2-chan28-tx", "edma2-chan29-tx", - "edma2-chan30-tx", "edma2-chan31-tx"; - clocks = <&pcc5 IMX8ULP_CLK_DMA2_MP>, - <&pcc5 IMX8ULP_CLK_DMA2_CH0>, <&pcc5 IMX8ULP_CLK_DMA2_CH1>, - <&pcc5 IMX8ULP_CLK_DMA2_CH2>, <&pcc5 IMX8ULP_CLK_DMA2_CH3>, - <&pcc5 IMX8ULP_CLK_DMA2_CH4>, <&pcc5 IMX8ULP_CLK_DMA2_CH5>, - <&pcc5 IMX8ULP_CLK_DMA2_CH6>, <&pcc5 IMX8ULP_CLK_DMA2_CH7>, - <&pcc5 IMX8ULP_CLK_DMA2_CH8>, <&pcc5 IMX8ULP_CLK_DMA2_CH9>, - <&pcc5 IMX8ULP_CLK_DMA2_CH10>, <&pcc5 IMX8ULP_CLK_DMA2_CH11>, - <&pcc5 IMX8ULP_CLK_DMA2_CH12>, <&pcc5 IMX8ULP_CLK_DMA2_CH13>, - <&pcc5 IMX8ULP_CLK_DMA2_CH14>, <&pcc5 IMX8ULP_CLK_DMA2_CH15>, - <&pcc5 IMX8ULP_CLK_DMA2_CH16>, <&pcc5 IMX8ULP_CLK_DMA2_CH17>, - <&pcc5 IMX8ULP_CLK_DMA2_CH18>, <&pcc5 IMX8ULP_CLK_DMA2_CH19>, - <&pcc5 IMX8ULP_CLK_DMA2_CH20>, <&pcc5 IMX8ULP_CLK_DMA2_CH21>, - <&pcc5 IMX8ULP_CLK_DMA2_CH22>, <&pcc5 IMX8ULP_CLK_DMA2_CH23>, - <&pcc5 IMX8ULP_CLK_DMA2_CH24>, <&pcc5 IMX8ULP_CLK_DMA2_CH25>, - <&pcc5 IMX8ULP_CLK_DMA2_CH26>, <&pcc5 IMX8ULP_CLK_DMA2_CH27>, - <&pcc5 IMX8ULP_CLK_DMA2_CH28>, <&pcc5 IMX8ULP_CLK_DMA2_CH29>, - <&pcc5 IMX8ULP_CLK_DMA2_CH30>, <&pcc5 IMX8ULP_CLK_DMA2_CH31>; - clock-names = "edma-mp-clk", - "edma2-chan0-clk", "edma2-chan1-clk", - "edma2-chan2-clk", "edma2-chan3-clk", - "edma2-chan4-clk", "edma2-chan5-clk", - "edma2-chan6-clk", "edma2-chan7-clk", - "edma2-chan8-clk", "edma2-chan9-clk", - "edma2-chan10-clk", "edma2-chan11-clk", - "edma2-chan12-clk", "edma2-chan13-clk", - "edma2-chan14-clk", "edma2-chan15-clk", - "edma2-chan16-clk", "edma2-chan17-clk", - "edma2-chan18-clk", "edma2-chan19-clk", - "edma2-chan20-clk", "edma2-chan21-clk", - "edma2-chan22-clk", "edma2-chan23-clk", - "edma2-chan24-clk", "edma2-chan25-clk", - "edma2-chan26-clk", "edma2-chan27-clk", - "edma2-chan28-clk", "edma2-chan29-clk", - "edma2-chan30-clk", "edma2-chan31-clk"; - status = "okay"; - }; - cgc2: clock-controller@2da60000 { compatible = "fsl,imx8ulp-cgc2"; reg = <0x2da60000 0x10000>; - clocks = <&sosc>, <&frosc>; - clock-names = "sosc", "frosc"; #clock-cells = <1>; }; @@ -708,12 +455,13 @@ compatible = "fsl,imx8ulp-pcc5"; reg = <0x2da70000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; }; - gpiod: gpio@2e200000 { - compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; - reg = <0x2e200080 0x1000 0x2e200040 0x40>; + gpiod: gpio@2e200080 { + compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; + reg = <0x2e200080 0x1000>, <0x2e200040 0x40>; gpio-controller; #gpio-cells = <2>; interrupts = ; diff --git a/include/dt-bindings/clock/imx8ulp-clock.h b/include/dt-bindings/clock/imx8ulp-clock.h index 49166a1830..953ecfe8eb 100644 --- a/include/dt-bindings/clock/imx8ulp-clock.h +++ b/include/dt-bindings/clock/imx8ulp-clock.h @@ -1,16 +1,14 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ /* - * Copyright 2020 NXP + * Copyright 2021 NXP */ #ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H #define __DT_BINDINGS_CLOCK_IMX8ULP_H #define IMX8ULP_CLK_DUMMY 0 -#define IMX8ULP_CLK_ROSC 1 -#define IMX8ULP_CLK_FROSC 2 -#define IMX8ULP_CLK_LPOSC 3 -#define IMX8ULP_CLK_SOSC 4 + +/* CGC1 */ #define IMX8ULP_CLK_SPLL2 5 #define IMX8ULP_CLK_SPLL3 6 #define IMX8ULP_CLK_A35_SEL 7 @@ -57,14 +55,15 @@ #define IMX8ULP_CLK_FROSC_DIV1_GATE 48 #define IMX8ULP_CLK_FROSC_DIV2_GATE 49 #define IMX8ULP_CLK_FROSC_DIV3_GATE 50 -#define IMX8ULP_CLK_ENETSTAMP_SEL 51 -#define IMX8ULP_CLK_SAI4_SEL 52 -#define IMX8ULP_CLK_SAI5_SEL 53 -#define IMX8ULP_CLK_AUD_CLK1 54 -#define IMX8ULP_CLK_ARM 55 +#define IMX8ULP_CLK_SAI4_SEL 51 +#define IMX8ULP_CLK_SAI5_SEL 52 +#define IMX8ULP_CLK_AUD_CLK1 53 +#define IMX8ULP_CLK_ARM 54 +#define IMX8ULP_CLK_ENET_TS_SEL 55 #define IMX8ULP_CLK_CGC1_END 56 +/* CGC2 */ #define IMX8ULP_CLK_PLL4_PRE_SEL 0 #define IMX8ULP_CLK_PLL4 1 #define IMX8ULP_CLK_PLL4_VCODIV 2 @@ -110,8 +109,12 @@ #define IMX8ULP_CLK_SAI6_SEL 42 #define IMX8ULP_CLK_SAI7_SEL 43 #define IMX8ULP_CLK_SPDIF_SEL 44 +#define IMX8ULP_CLK_HIFI_SEL 45 +#define IMX8ULP_CLK_HIFI_DIVCORE 46 +#define IMX8ULP_CLK_HIFI_DIVPLAT 47 +#define IMX8ULP_CLK_DSI_PHY_REF 48 -#define IMX8ULP_CLK_CGC2_END 45 +#define IMX8ULP_CLK_CGC2_END 49 /* PCC3 */ #define IMX8ULP_CLK_WDOG3 0 @@ -160,9 +163,12 @@ #define IMX8ULP_CLK_DMA1_CH29 43 #define IMX8ULP_CLK_DMA1_CH30 44 #define IMX8ULP_CLK_DMA1_CH31 45 +#define IMX8ULP_CLK_MU3_A 46 +#define IMX8ULP_CLK_MU0_B 47 -#define IMX8ULP_CLK_PCC3_END 46 +#define IMX8ULP_CLK_PCC3_END 48 +/* PCC4 */ #define IMX8ULP_CLK_FLEXSPI2 0 #define IMX8ULP_CLK_TPM6 1 #define IMX8ULP_CLK_TPM7 2 @@ -189,24 +195,25 @@ #define IMX8ULP_CLK_PCC4_END 23 +/* PCC5 */ #define IMX8ULP_CLK_TPM8 0 #define IMX8ULP_CLK_SAI6 1 #define IMX8ULP_CLK_SAI7 2 #define IMX8ULP_CLK_SPDIF 3 -#define IMX8ULP_CLK_ISI 4 -#define IMX8ULP_CLK_CSI_REGS 5 +#define IMX8ULP_CLK_ISI 4 +#define IMX8ULP_CLK_CSI_REGS 5 #define IMX8ULP_CLK_PCTLD 6 -#define IMX8ULP_CLK_CSI 7 -#define IMX8ULP_CLK_DSI 8 +#define IMX8ULP_CLK_CSI 7 +#define IMX8ULP_CLK_DSI 8 #define IMX8ULP_CLK_WDOG5 9 #define IMX8ULP_CLK_EPDC 10 -#define IMX8ULP_CLK_PXP 11 +#define IMX8ULP_CLK_PXP 11 #define IMX8ULP_CLK_SFA2 12 #define IMX8ULP_CLK_GPU2D 13 #define IMX8ULP_CLK_GPU3D 14 #define IMX8ULP_CLK_DC_NANO 15 -#define IMX8ULP_CLK_CSI_CLK_UI 16 -#define IMX8ULP_CLK_CSI_CLK_ESC 17 +#define IMX8ULP_CLK_CSI_CLK_UI 16 +#define IMX8ULP_CLK_CSI_CLK_ESC 17 #define IMX8ULP_CLK_RGPIOD 18 #define IMX8ULP_CLK_DMA2_MP 19 #define IMX8ULP_CLK_DMA2_CH0 20 @@ -241,7 +248,11 @@ #define IMX8ULP_CLK_DMA2_CH29 49 #define IMX8ULP_CLK_DMA2_CH30 50 #define IMX8ULP_CLK_DMA2_CH31 51 +#define IMX8ULP_CLK_MU2_B 52 +#define IMX8ULP_CLK_MU3_B 53 +#define IMX8ULP_CLK_AVD_SIM 54 +#define IMX8ULP_CLK_DSI_TX_ESC 55 -#define IMX8ULP_CLK_PCC5_END 52 +#define IMX8ULP_CLK_PCC5_END 56 #endif diff --git a/include/dt-bindings/power/imx8ulp-power.h b/include/dt-bindings/power/imx8ulp-power.h new file mode 100644 index 0000000000..a556b2e96d --- /dev/null +++ b/include/dt-bindings/power/imx8ulp-power.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright 2021 NXP + */ + +#ifndef __DT_BINDINGS_IMX8ULP_POWER_H__ +#define __DT_BINDINGS_IMX8ULP_POWER_H__ + +#define IMX8ULP_PD_DMA1 0 +#define IMX8ULP_PD_FLEXSPI2 1 +#define IMX8ULP_PD_USB0 2 +#define IMX8ULP_PD_USDHC0 3 +#define IMX8ULP_PD_USDHC1 4 +#define IMX8ULP_PD_USDHC2_USB1 5 +#define IMX8ULP_PD_DCNANO 6 +#define IMX8ULP_PD_EPDC 7 +#define IMX8ULP_PD_DMA2 8 +#define IMX8ULP_PD_GPU2D 9 +#define IMX8ULP_PD_GPU3D 10 +#define IMX8ULP_PD_HIFI4 11 +#define IMX8ULP_PD_ISI 12 +#define IMX8ULP_PD_MIPI_CSI 13 +#define IMX8ULP_PD_MIPI_DSI 14 +#define IMX8ULP_PD_PXP 15 + +#endif diff --git a/include/dt-bindings/reset/imx8ulp-pcc-reset.h b/include/dt-bindings/reset/imx8ulp-pcc-reset.h new file mode 100644 index 0000000000..e99a4735c3 --- /dev/null +++ b/include/dt-bindings/reset/imx8ulp-pcc-reset.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2021 NXP + */ + +#ifndef DT_BINDING_PCC_RESET_IMX8ULP_H +#define DT_BINDING_PCC_RESET_IMX8ULP_H + +/* PCC3 */ +#define PCC3_WDOG3_SWRST 0 +#define PCC3_WDOG4_SWRST 1 +#define PCC3_LPIT1_SWRST 2 +#define PCC3_TPM4_SWRST 3 +#define PCC3_TPM5_SWRST 4 +#define PCC3_FLEXIO1_SWRST 5 +#define PCC3_I3C2_SWRST 6 +#define PCC3_LPI2C4_SWRST 7 +#define PCC3_LPI2C5_SWRST 8 +#define PCC3_LPUART4_SWRST 9 +#define PCC3_LPUART5_SWRST 10 +#define PCC3_LPSPI4_SWRST 11 +#define PCC3_LPSPI5_SWRST 12 + +/* PCC4 */ +#define PCC4_FLEXSPI2_SWRST 0 +#define PCC4_TPM6_SWRST 1 +#define PCC4_TPM7_SWRST 2 +#define PCC4_LPI2C6_SWRST 3 +#define PCC4_LPI2C7_SWRST 4 +#define PCC4_LPUART6_SWRST 5 +#define PCC4_LPUART7_SWRST 6 +#define PCC4_SAI4_SWRST 7 +#define PCC4_SAI5_SWRST 8 +#define PCC4_USDHC0_SWRST 9 +#define PCC4_USDHC1_SWRST 10 +#define PCC4_USDHC2_SWRST 11 +#define PCC4_USB0_SWRST 12 +#define PCC4_USB0_PHY_SWRST 13 +#define PCC4_USB1_SWRST 14 +#define PCC4_USB1_PHY_SWRST 15 +#define PCC4_ENET_SWRST 16 + +/* PCC5 */ +#define PCC5_TPM8_SWRST 0 +#define PCC5_SAI6_SWRST 1 +#define PCC5_SAI7_SWRST 2 +#define PCC5_SPDIF_SWRST 3 +#define PCC5_ISI_SWRST 4 +#define PCC5_CSI_REGS_SWRST 5 +#define PCC5_CSI_SWRST 6 +#define PCC5_DSI_SWRST 7 +#define PCC5_WDOG5_SWRST 8 +#define PCC5_EPDC_SWRST 9 +#define PCC5_PXP_SWRST 10 +#define PCC5_GPU2D_SWRST 11 +#define PCC5_GPU3D_SWRST 12 +#define PCC5_DC_NANO_SWRST 13 + +#endif /*DT_BINDING_RESET_IMX8ULP_H */ -- 2.34.1