From ed3213c9134f322b8faf945a1528a0f0344c8510 Mon Sep 17 00:00:00 2001 From: David Gnedt Date: Tue, 7 Jan 2014 13:09:42 +0100 Subject: [PATCH] wl1251: fix channel switching in monitor mode MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Use the ENABLE_RX command for channel switching when no interface is present (monitor mode only). The advantage of ENABLE_RX is that it leaves the tx data path disabled in firmware, whereas the usual JOIN command seems to transmit some frames at firmware level. Signed-off-by: David Gnedt Signed-off-by: Pali Rohár Signed-off-by: Pavel Machek Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl1251/main.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index c77c456..855026a 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -615,8 +615,19 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed) if (channel != wl->channel) { wl->channel = channel; - ret = wl1251_join(wl, wl->bss_type, wl->channel, - wl->beacon_int, wl->dtim_period); + /* + * Use ENABLE_RX command for channel switching when no + * interface is present (monitor mode only). + * This leaves the tx path disabled in firmware, whereas + * the usual JOIN command seems to transmit some frames + * at firmware level. + */ + if (wl->vif == NULL) { + ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1); + } else { + ret = wl1251_join(wl, wl->bss_type, wl->channel, + wl->beacon_int, wl->dtim_period); + } if (ret < 0) goto out_sleep; } -- 2.7.4