From ebc646f681a6ad5a81989a6906832e82155df283 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 17 Oct 2006 10:23:56 -0700 Subject: [PATCH] sky2: phy irq on shutdown When PHY is turned off on shutdown, it causes the IRQ to get stuck on. Make sure and disable the IRQ first, and if IRQ occurs when device is not running, don't access PHY because that will hang. Signed-off-by: Stephen Hemminger --- drivers/net/sky2.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index bd5ccae..2747e2f 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1499,6 +1499,11 @@ static int sky2_down(struct net_device *dev) /* Stop more packets from being queued */ netif_stop_queue(dev); + /* Disable port IRQ */ + imask = sky2_read32(hw, B0_IMSK); + imask &= ~portirq_msk[port]; + sky2_write32(hw, B0_IMSK, imask); + sky2_gmac_reset(hw, port); /* Stop transmitter */ @@ -1549,11 +1554,6 @@ static int sky2_down(struct net_device *dev) sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); - /* Disable port IRQ */ - imask = sky2_read32(hw, B0_IMSK); - imask &= ~portirq_msk[port]; - sky2_write32(hw, B0_IMSK, imask); - sky2_phy_power(hw, port, 0); /* turn off LED's */ @@ -1750,13 +1750,13 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) struct sky2_port *sky2 = netdev_priv(dev); u16 istatus, phystat; + if (!netif_running(dev)) + return; + spin_lock(&sky2->phy_lock); istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); - if (!netif_running(dev)) - goto out; - if (netif_msg_intr(sky2)) printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", sky2->netdev->name, istatus, phystat); -- 2.7.4