From e8d48c2282a913edb10c6ce1c4320e44b717b280 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Fri, 22 Dec 2023 22:11:27 +0000 Subject: [PATCH] Revert "usb: dwc3: Soft reset phy on probe for host" MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit commit 7059fbebcb00554c3f31e5b5d93ef6d2d96dc7b4 upstream. This reverts commit 8bea147dfdf823eaa8d3baeccc7aeb041b41944b. The phy soft reset GUSB2PHYCFG.PHYSOFTRST only applies to UTMI phy, not ULPI. This fix is incomplete. Cc: Fixes: 8bea147dfdf8 ("usb: dwc3: Soft reset phy on probe for host") Reported-by: Köry Maincent Closes: https://lore.kernel.org/linux-usb/20231205151959.5236c231@kmaincent-XPS-13-7390 Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/29a26593a60eba727de872a3e580a674807b3339.1703282469.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 39 +-------------------------------------- 1 file changed, 1 insertion(+), 38 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 8d5af9c..d9b9bd2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -279,46 +279,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) * XHCI driver will reset the host block. If dwc3 was configured for * host-only mode or current role is host, then we can return early. */ - if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; - /* - * If the dr_mode is host and the dwc->current_dr_role is not the - * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode - * isn't executed yet. Ensure the phy is ready before the controller - * updates the GCTL.PRTCAPDIR or other settings by soft-resetting - * the phy. - * - * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n - * is port index. If this is a multiport host, then we need to reset - * all active ports. - */ - if (dwc->dr_mode == USB_DR_MODE_HOST) { - u32 usb3_port; - u32 usb2_port; - - usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Small delay for phy reset assertion */ - usleep_range(1000, 2000); - - usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Wait for clock synchronization */ - msleep(50); - return 0; - } - reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; reg &= ~DWC3_DCTL_RUN_STOP; -- 2.7.4