From e8977917e116d1571dacb8e9864474551c1c12bd Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Thu, 23 Jun 2022 11:46:12 +0200 Subject: [PATCH] regulator: qcom_smd: Fix pm8916_pldo range The PM8916 device specification [1] documents a programmable range of 1.75V to 3.337V with 12.5mV steps for the PMOS LDOs in PM8916. This range is also used when controlling the regulator directly using the qcom_spmi-regulator driver ("ult_pldo" there). However, for some reason the qcom_smd-regulator driver allows a much larger range for the same hardware component. This could be simply a typo, since the start of the range is essentially just missing a '1'. In practice this does not cause any major problems, since the driver just sends the actual voltage to the RPM firmware instead of making use of the incorrect voltage selector. Still, having the wrong range there is confusing and prevents the regulator core from validating requests correctly. [1]: https://developer.qualcomm.com/download/sd410/pm8916pm8916-1-power-management-ic-device-specification.pdf Fixes: 57d6567680ed ("regulator: qcom-smd: Add PM8916 support") Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20220623094614.1410180-2-stephan.gerhold@kernkonzept.com Signed-off-by: Mark Brown --- drivers/regulator/qcom_smd-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index ef6e47d..60f3513 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -357,10 +357,10 @@ static const struct regulator_desc pm8941_switch = { static const struct regulator_desc pm8916_pldo = { .linear_ranges = (struct linear_range[]) { - REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), + REGULATOR_LINEAR_RANGE(1750000, 0, 127, 12500), }, .n_linear_ranges = 1, - .n_voltages = 209, + .n_voltages = 128, .ops = &rpm_smps_ldo_ops, }; -- 2.7.4