From e7bda303a43f5507cb76f8b41a6e73fec0f83cc8 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 6 Dec 2012 15:00:46 +0000 Subject: [PATCH] ARM: ux500: Specify the ux5x0 MMCI regulator's on/off GPIO as high-enable If not specified, the GPIO control bit is inverted by default i.e. low-enable and high-disable. This is not the case with the MMCI regulator, hence it will turn on during a disable and off when regulator_enable() is invoked. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/boot/dts/dbx5x0.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index a8562e3..b5e73aa 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -679,6 +679,8 @@ regulator-name = "mmci-reg"; regulator-type = "voltage"; + enable-active-high; + states = <1800000 0x1 2900000 0x0>; -- 2.7.4