From e6a5a5c72b63fd6d2c7ed48b3e49d8da726c69c2 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 15 Jan 2020 09:08:10 +0200 Subject: [PATCH] arm: mvebu: clearfog: update eMMC documentation SPL now automatically selects the correct U-Boot image offset for both eMMC and SD card. No need to tweak CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. Signed-off-by: Baruch Siach Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- board/solidrun/clearfog/README | 6 ------ 1 file changed, 6 deletions(-) diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 6171ce6..9375be8 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -20,12 +20,6 @@ of "/dev/sdX" here! Install U-Boot on eMMC: ----------------------- -The ROM loads the bootloader from eMMC first boot partition at offset 0. This -is unlike load from SD card that is at offset 512. As a result, the offset of -the main U-Boot image on the eMMC boot partition changes. Set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x140 for SPL to load U-Boot from -the correct location. - To make SPL load the main U-Boot image from the eMMC boot partition enable eMMC boot acknowledgement and boot partition with the following U-Boot command: -- 2.7.4