From e66f840c08a237acfbb981592047b53e7411012f Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Mon, 29 Jul 2019 19:49:47 +0200 Subject: [PATCH] net: dsa: ksz: Add Microchip KSZ8795 DSA driver Add Microchip KSZ8795 DSA driver. Signed-off-by: Tristram Ha Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: Tristram Ha Cc: Vivien Didelot Cc: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/Kconfig | 17 + drivers/net/dsa/microchip/Makefile | 2 + drivers/net/dsa/microchip/ksz8795.c | 1311 +++++++++++++++++++++++++++++++ drivers/net/dsa/microchip/ksz8795_reg.h | 1004 +++++++++++++++++++++++ drivers/net/dsa/microchip/ksz8795_spi.c | 104 +++ drivers/net/dsa/microchip/ksz_common.c | 3 +- drivers/net/dsa/microchip/ksz_common.h | 28 + drivers/net/dsa/microchip/ksz_priv.h | 1 + 8 files changed, 2469 insertions(+), 1 deletion(-) create mode 100644 drivers/net/dsa/microchip/ksz8795.c create mode 100644 drivers/net/dsa/microchip/ksz8795_reg.h create mode 100644 drivers/net/dsa/microchip/ksz8795_spi.c diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index fe0a13b..5e4f742 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -16,3 +16,20 @@ config NET_DSA_MICROCHIP_KSZ9477_SPI select REGMAP_SPI help Select to enable support for registering switches configured through SPI. + +menuconfig NET_DSA_MICROCHIP_KSZ8795 + tristate "Microchip KSZ8795 series switch support" + depends on NET_DSA + select NET_DSA_MICROCHIP_KSZ_COMMON + help + This driver adds support for Microchip KSZ8795 switch chips. + +config NET_DSA_MICROCHIP_KSZ8795_SPI + tristate "KSZ8795 series SPI connected switch driver" + depends on NET_DSA_MICROCHIP_KSZ8795 && SPI + select REGMAP_SPI + help + This driver accesses KSZ8795 chip through SPI. + + It is required to use the KSZ8795 switch driver as the only access + is through SPI. diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile index 68451b0..e3d799b 100644 --- a/drivers/net/dsa/microchip/Makefile +++ b/drivers/net/dsa/microchip/Makefile @@ -2,3 +2,5 @@ obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_common.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477) += ksz9477.o obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI) += ksz9477_spi.o +obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795) += ksz8795.o +obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI) += ksz8795_spi.o diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c new file mode 100644 index 0000000..ae80b3c --- /dev/null +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -0,0 +1,1311 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip KSZ8795 switch driver + * + * Copyright (C) 2017 Microchip Technology Inc. + * Tristram Ha + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ksz_priv.h" +#include "ksz_common.h" +#include "ksz8795_reg.h" + +static const struct { + char string[ETH_GSTRING_LEN]; +} mib_names[TOTAL_SWITCH_COUNTER_NUM] = { + { "rx_hi" }, + { "rx_undersize" }, + { "rx_fragments" }, + { "rx_oversize" }, + { "rx_jabbers" }, + { "rx_symbol_err" }, + { "rx_crc_err" }, + { "rx_align_err" }, + { "rx_mac_ctrl" }, + { "rx_pause" }, + { "rx_bcast" }, + { "rx_mcast" }, + { "rx_ucast" }, + { "rx_64_or_less" }, + { "rx_65_127" }, + { "rx_128_255" }, + { "rx_256_511" }, + { "rx_512_1023" }, + { "rx_1024_1522" }, + { "rx_1523_2000" }, + { "rx_2001" }, + { "tx_hi" }, + { "tx_late_col" }, + { "tx_pause" }, + { "tx_bcast" }, + { "tx_mcast" }, + { "tx_ucast" }, + { "tx_deferred" }, + { "tx_total_col" }, + { "tx_exc_col" }, + { "tx_single_col" }, + { "tx_mult_col" }, + { "rx_total" }, + { "tx_total" }, + { "rx_discards" }, + { "tx_discards" }, +}; + +static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); +} + +static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, + bool set) +{ + regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +static int ksz8795_reset_switch(struct ksz_device *dev) +{ + /* reset switch */ + ksz_write8(dev, REG_POWER_MANAGEMENT_1, + SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S); + ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0); + + return 0; +} + +static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue) +{ + u8 hi, lo; + + /* Number of queues can only be 1, 2, or 4. */ + switch (queue) { + case 4: + case 3: + queue = PORT_QUEUE_SPLIT_4; + break; + case 2: + queue = PORT_QUEUE_SPLIT_2; + break; + default: + queue = PORT_QUEUE_SPLIT_1; + } + ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo); + ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi); + lo &= ~PORT_QUEUE_SPLIT_L; + if (queue & PORT_QUEUE_SPLIT_2) + lo |= PORT_QUEUE_SPLIT_L; + hi &= ~PORT_QUEUE_SPLIT_H; + if (queue & PORT_QUEUE_SPLIT_4) + hi |= PORT_QUEUE_SPLIT_H; + ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo); + ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi); + + /* Default is port based for egress rate limit. */ + if (queue != PORT_QUEUE_SPLIT_1) + ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED, + true); +} + +static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, + u64 *cnt) +{ + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + ctrl_addr = addr + SWITCH_COUNTER_NUM * port; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, REG_IND_MIB_CHECK, &check); + + if (check & MIB_COUNTER_VALID) { + ksz_read32(dev, REG_IND_DATA_LO, &data); + if (check & MIB_COUNTER_OVERFLOW) + *cnt += MIB_COUNTER_VALUE + 1; + *cnt += data & MIB_COUNTER_VALUE; + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + addr -= SWITCH_COUNTER_NUM; + ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port; + ctrl_addr += addr + KS_MIB_TOTAL_RX_0; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, REG_IND_MIB_CHECK, &check); + + if (check & MIB_COUNTER_VALID) { + ksz_read32(dev, REG_IND_DATA_LO, &data); + if (addr < 2) { + u64 total; + + total = check & MIB_TOTAL_BYTES_H; + total <<= 32; + *cnt += total; + *cnt += data; + if (check & MIB_COUNTER_OVERFLOW) { + total = MIB_TOTAL_BYTES_H + 1; + total <<= 32; + *cnt += total; + } + } else { + if (check & MIB_COUNTER_OVERFLOW) + *cnt += MIB_PACKET_DROPPED + 1; + *cnt += data & MIB_PACKET_DROPPED; + } + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze) +{ + /* enable the port for flush/freeze function */ + if (freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze); + + /* disable the port after freeze is done */ + if (!freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); +} + +static void ksz8795_port_init_cnt(struct ksz_device *dev, int port) +{ + struct ksz_port_mib *mib = &dev->ports[port].mib; + + /* flush all enabled port MIB counters */ + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); + + mib->cnt_ptr = 0; + + /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->reg_mib_cnt) { + dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, + &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + + /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->mib_cnt) { + dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, + NULL, &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + mib->cnt_ptr = 0; + memset(mib->counters, 0, dev->mib_cnt * sizeof(u64)); +} + +static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr, + u64 *data) +{ + u16 ctrl_addr; + + ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + ksz_read64(dev, REG_IND_DATA_HI, data); + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr, + u64 data) +{ + u16 ctrl_addr; + + ctrl_addr = IND_ACC_TABLE(table) | addr; + + mutex_lock(&dev->alu_mutex); + ksz_write64(dev, REG_IND_DATA_HI, data); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + mutex_unlock(&dev->alu_mutex); +} + +static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data) +{ + int timeout = 100; + + do { + ksz_read8(dev, REG_IND_DATA_CHECK, data); + timeout--; + } while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout); + + /* Entry is not ready for accessing. */ + if (*data & DYNAMIC_MAC_TABLE_NOT_READY) { + return -EAGAIN; + /* Entry is ready for accessing. */ + } else { + ksz_read8(dev, REG_IND_DATA_8, data); + + /* There is no valid entry in the table. */ + if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY) + return -ENXIO; + } + return 0; +} + +static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr, + u8 *mac_addr, u8 *fid, u8 *src_port, + u8 *timestamp, u16 *entries) +{ + u32 data_hi, data_lo; + u16 ctrl_addr; + u8 data; + int rc; + + ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr); + + rc = ksz8795_valid_dyn_entry(dev, &data); + if (rc == -EAGAIN) { + if (addr == 0) + *entries = 0; + } else if (rc == -ENXIO) { + *entries = 0; + /* At least one valid entry in the table. */ + } else { + u64 buf = 0; + int cnt; + + ksz_read64(dev, REG_IND_DATA_HI, &buf); + data_hi = (u32)(buf >> 32); + data_lo = (u32)buf; + + /* Check out how many valid entry in the table. */ + cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H; + cnt <<= DYNAMIC_MAC_ENTRIES_H_S; + cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >> + DYNAMIC_MAC_ENTRIES_S; + *entries = cnt + 1; + + *fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >> + DYNAMIC_MAC_FID_S; + *src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >> + DYNAMIC_MAC_SRC_PORT_S; + *timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >> + DYNAMIC_MAC_TIMESTAMP_S; + + mac_addr[5] = (u8)data_lo; + mac_addr[4] = (u8)(data_lo >> 8); + mac_addr[3] = (u8)(data_lo >> 16); + mac_addr[2] = (u8)(data_lo >> 24); + + mac_addr[1] = (u8)data_hi; + mac_addr[0] = (u8)(data_hi >> 8); + rc = 0; + } + mutex_unlock(&dev->alu_mutex); + + return rc; +} + +static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu) +{ + u32 data_hi, data_lo; + u64 data; + + ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data); + data_hi = data >> 32; + data_lo = (u32)data; + if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) { + alu->mac[5] = (u8)data_lo; + alu->mac[4] = (u8)(data_lo >> 8); + alu->mac[3] = (u8)(data_lo >> 16); + alu->mac[2] = (u8)(data_lo >> 24); + alu->mac[1] = (u8)data_hi; + alu->mac[0] = (u8)(data_hi >> 8); + alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >> + STATIC_MAC_FWD_PORTS_S; + alu->is_override = + (data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0; + data_hi >>= 1; + alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0; + alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >> + STATIC_MAC_FID_S; + return 0; + } + return -ENXIO; +} + +static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu) +{ + u32 data_hi, data_lo; + u64 data; + + data_lo = ((u32)alu->mac[2] << 24) | + ((u32)alu->mac[3] << 16) | + ((u32)alu->mac[4] << 8) | alu->mac[5]; + data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1]; + data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S; + + if (alu->is_override) + data_hi |= STATIC_MAC_TABLE_OVERRIDE; + if (alu->is_use_fid) { + data_hi |= STATIC_MAC_TABLE_USE_FID; + data_hi |= (u32)alu->fid << STATIC_MAC_FID_S; + } + if (alu->is_static) + data_hi |= STATIC_MAC_TABLE_VALID; + else + data_hi &= ~STATIC_MAC_TABLE_OVERRIDE; + + data = (u64)data_hi << 32 | data_lo; + ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data); +} + +static void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid) +{ + *fid = vlan & VLAN_TABLE_FID; + *member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S; + *valid = !!(vlan & VLAN_TABLE_VALID); +} + +static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan) +{ + *vlan = fid; + *vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S; + if (valid) + *vlan |= VLAN_TABLE_VALID; +} + +static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr) +{ + u64 data; + int i; + + ksz8795_r_table(dev, TABLE_VLAN, addr, &data); + addr *= 4; + for (i = 0; i < 4; i++) { + dev->vlan_cache[addr + i].table[0] = (u16)data; + data >>= VLAN_TABLE_S; + } +} + +static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8795_r_table(dev, TABLE_VLAN, addr, &buf); + *vlan = data[index]; +} + +static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8795_r_table(dev, TABLE_VLAN, addr, &buf); + data[index] = vlan; + dev->vlan_cache[vid].table[0] = vlan; + ksz8795_w_table(dev, TABLE_VLAN, addr, buf); +} + +static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) +{ + u8 restart, speed, ctrl, link; + int processed = true; + u16 data = 0; + u8 p = phy; + + switch (reg) { + case PHY_REG_CTRL: + ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart); + ksz_pread8(dev, p, P_SPEED_STATUS, &speed); + ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl); + if (restart & PORT_PHY_LOOPBACK) + data |= PHY_LOOPBACK; + if (ctrl & PORT_FORCE_100_MBIT) + data |= PHY_SPEED_100MBIT; + if (!(ctrl & PORT_AUTO_NEG_DISABLE)) + data |= PHY_AUTO_NEG_ENABLE; + if (restart & PORT_POWER_DOWN) + data |= PHY_POWER_DOWN; + if (restart & PORT_AUTO_NEG_RESTART) + data |= PHY_AUTO_NEG_RESTART; + if (ctrl & PORT_FORCE_FULL_DUPLEX) + data |= PHY_FULL_DUPLEX; + if (speed & PORT_HP_MDIX) + data |= PHY_HP_MDIX; + if (restart & PORT_FORCE_MDIX) + data |= PHY_FORCE_MDIX; + if (restart & PORT_AUTO_MDIX_DISABLE) + data |= PHY_AUTO_MDIX_DISABLE; + if (restart & PORT_TX_DISABLE) + data |= PHY_TRANSMIT_DISABLE; + if (restart & PORT_LED_OFF) + data |= PHY_LED_DISABLE; + break; + case PHY_REG_STATUS: + ksz_pread8(dev, p, P_LINK_STATUS, &link); + data = PHY_100BTX_FD_CAPABLE | + PHY_100BTX_CAPABLE | + PHY_10BT_FD_CAPABLE | + PHY_10BT_CAPABLE | + PHY_AUTO_NEG_CAPABLE; + if (link & PORT_AUTO_NEG_COMPLETE) + data |= PHY_AUTO_NEG_ACKNOWLEDGE; + if (link & PORT_STAT_LINK_GOOD) + data |= PHY_LINK_STATUS; + break; + case PHY_REG_ID_1: + data = KSZ8795_ID_HI; + break; + case PHY_REG_ID_2: + data = KSZ8795_ID_LO; + break; + case PHY_REG_AUTO_NEGOTIATION: + ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl); + data = PHY_AUTO_NEG_802_3; + if (ctrl & PORT_AUTO_NEG_SYM_PAUSE) + data |= PHY_AUTO_NEG_SYM_PAUSE; + if (ctrl & PORT_AUTO_NEG_100BTX_FD) + data |= PHY_AUTO_NEG_100BTX_FD; + if (ctrl & PORT_AUTO_NEG_100BTX) + data |= PHY_AUTO_NEG_100BTX; + if (ctrl & PORT_AUTO_NEG_10BT_FD) + data |= PHY_AUTO_NEG_10BT_FD; + if (ctrl & PORT_AUTO_NEG_10BT) + data |= PHY_AUTO_NEG_10BT; + break; + case PHY_REG_REMOTE_CAPABILITY: + ksz_pread8(dev, p, P_REMOTE_STATUS, &link); + data = PHY_AUTO_NEG_802_3; + if (link & PORT_REMOTE_SYM_PAUSE) + data |= PHY_AUTO_NEG_SYM_PAUSE; + if (link & PORT_REMOTE_100BTX_FD) + data |= PHY_AUTO_NEG_100BTX_FD; + if (link & PORT_REMOTE_100BTX) + data |= PHY_AUTO_NEG_100BTX; + if (link & PORT_REMOTE_10BT_FD) + data |= PHY_AUTO_NEG_10BT_FD; + if (link & PORT_REMOTE_10BT) + data |= PHY_AUTO_NEG_10BT; + if (data & ~PHY_AUTO_NEG_802_3) + data |= PHY_REMOTE_ACKNOWLEDGE_NOT; + break; + default: + processed = false; + break; + } + if (processed) + *val = data; +} + +static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + u8 p = phy; + u8 restart, speed, ctrl, data; + + switch (reg) { + case PHY_REG_CTRL: + + /* Do not support PHY reset function. */ + if (val & PHY_RESET) + break; + ksz_pread8(dev, p, P_SPEED_STATUS, &speed); + data = speed; + if (val & PHY_HP_MDIX) + data |= PORT_HP_MDIX; + else + data &= ~PORT_HP_MDIX; + if (data != speed) + ksz_pwrite8(dev, p, P_SPEED_STATUS, data); + ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl); + data = ctrl; + if (!(val & PHY_AUTO_NEG_ENABLE)) + data |= PORT_AUTO_NEG_DISABLE; + else + data &= ~PORT_AUTO_NEG_DISABLE; + + /* Fiber port does not support auto-negotiation. */ + if (dev->ports[p].fiber) + data |= PORT_AUTO_NEG_DISABLE; + if (val & PHY_SPEED_100MBIT) + data |= PORT_FORCE_100_MBIT; + else + data &= ~PORT_FORCE_100_MBIT; + if (val & PHY_FULL_DUPLEX) + data |= PORT_FORCE_FULL_DUPLEX; + else + data &= ~PORT_FORCE_FULL_DUPLEX; + if (data != ctrl) + ksz_pwrite8(dev, p, P_FORCE_CTRL, data); + ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart); + data = restart; + if (val & PHY_LED_DISABLE) + data |= PORT_LED_OFF; + else + data &= ~PORT_LED_OFF; + if (val & PHY_TRANSMIT_DISABLE) + data |= PORT_TX_DISABLE; + else + data &= ~PORT_TX_DISABLE; + if (val & PHY_AUTO_NEG_RESTART) + data |= PORT_AUTO_NEG_RESTART; + else + data &= ~(PORT_AUTO_NEG_RESTART); + if (val & PHY_POWER_DOWN) + data |= PORT_POWER_DOWN; + else + data &= ~PORT_POWER_DOWN; + if (val & PHY_AUTO_MDIX_DISABLE) + data |= PORT_AUTO_MDIX_DISABLE; + else + data &= ~PORT_AUTO_MDIX_DISABLE; + if (val & PHY_FORCE_MDIX) + data |= PORT_FORCE_MDIX; + else + data &= ~PORT_FORCE_MDIX; + if (val & PHY_LOOPBACK) + data |= PORT_PHY_LOOPBACK; + else + data &= ~PORT_PHY_LOOPBACK; + if (data != restart) + ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data); + break; + case PHY_REG_AUTO_NEGOTIATION: + ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl); + data = ctrl; + data &= ~(PORT_AUTO_NEG_SYM_PAUSE | + PORT_AUTO_NEG_100BTX_FD | + PORT_AUTO_NEG_100BTX | + PORT_AUTO_NEG_10BT_FD | + PORT_AUTO_NEG_10BT); + if (val & PHY_AUTO_NEG_SYM_PAUSE) + data |= PORT_AUTO_NEG_SYM_PAUSE; + if (val & PHY_AUTO_NEG_100BTX_FD) + data |= PORT_AUTO_NEG_100BTX_FD; + if (val & PHY_AUTO_NEG_100BTX) + data |= PORT_AUTO_NEG_100BTX; + if (val & PHY_AUTO_NEG_10BT_FD) + data |= PORT_AUTO_NEG_10BT_FD; + if (val & PHY_AUTO_NEG_10BT) + data |= PORT_AUTO_NEG_10BT; + if (data != ctrl) + ksz_pwrite8(dev, p, P_LOCAL_CTRL, data); + break; + default: + break; + } +} + +static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds, + int port) +{ + return DSA_TAG_PROTO_KSZ8795; +} + +static void ksz8795_get_strings(struct dsa_switch *ds, int port, + u32 stringset, uint8_t *buf) +{ + int i; + + for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { + memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string, + ETH_GSTRING_LEN); + } +} + +static void ksz8795_cfg_port_member(struct ksz_device *dev, int port, + u8 member) +{ + u8 data; + + ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + data &= ~PORT_VLAN_MEMBERSHIP; + data |= (member & dev->port_mask); + ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); + dev->ports[port].member = member; +} + +static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct ksz_device *dev = ds->priv; + int forward = dev->member; + struct ksz_port *p; + int member = -1; + u8 data; + + p = &dev->ports[port]; + + ksz_pread8(dev, port, P_STP_CTRL, &data); + data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + + switch (state) { + case BR_STATE_DISABLED: + data |= PORT_LEARN_DISABLE; + if (port < SWITCH_PORT_NUM) + member = 0; + break; + case BR_STATE_LISTENING: + data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); + if (port < SWITCH_PORT_NUM && + p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + case BR_STATE_LEARNING: + data |= PORT_RX_ENABLE; + break; + case BR_STATE_FORWARDING: + data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + + /* This function is also used internally. */ + if (port == dev->cpu_port) + break; + + /* Port is a member of a bridge. */ + if (dev->br_member & BIT(port)) { + dev->member |= BIT(port); + member = dev->member; + } else { + member = dev->host_mask | p->vid_member; + } + break; + case BR_STATE_BLOCKING: + data |= PORT_LEARN_DISABLE; + if (port < SWITCH_PORT_NUM && + p->stp_state == BR_STATE_DISABLED) + member = dev->host_mask | p->vid_member; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + ksz_pwrite8(dev, port, P_STP_CTRL, data); + p->stp_state = state; + if (data & PORT_RX_ENABLE) + dev->rx_ports |= BIT(port); + else + dev->rx_ports &= ~BIT(port); + if (data & PORT_TX_ENABLE) + dev->tx_ports |= BIT(port); + else + dev->tx_ports &= ~BIT(port); + + /* Port membership may share register with STP state. */ + if (member >= 0 && member != p->member) + ksz8795_cfg_port_member(dev, port, (u8)member); + + /* Check if forwarding needs to be updated. */ + if (state != BR_STATE_FORWARDING) { + if (dev->br_member & BIT(port)) + dev->member &= ~BIT(port); + } + + /* When topology has changed the function ksz_update_port_member + * should be called to modify port forwarding behavior. + */ + if (forward != dev->member) + ksz_update_port_member(dev, port); +} + +static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port) +{ + u8 learn[TOTAL_PORT_NUM]; + int first, index, cnt; + struct ksz_port *p; + + if ((uint)port < TOTAL_PORT_NUM) { + first = port; + cnt = port + 1; + } else { + /* Flush all ports. */ + first = 0; + cnt = dev->mib_port_cnt; + } + for (index = first; index < cnt; index++) { + p = &dev->ports[index]; + if (!p->on) + continue; + ksz_pread8(dev, index, P_STP_CTRL, &learn[index]); + if (!(learn[index] & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, index, P_STP_CTRL, + learn[index] | PORT_LEARN_DISABLE); + } + ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + for (index = first; index < cnt; index++) { + p = &dev->ports[index]; + if (!p->on) + continue; + if (!(learn[index] & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, index, P_STP_CTRL, learn[index]); + } +} + +static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port, + bool flag) +{ + struct ksz_device *dev = ds->priv; + + ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag); + + return 0; +} + +static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + struct ksz_device *dev = ds->priv; + u16 data, vid, new_pvid = 0; + u8 fid, member, valid; + + ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + ksz8795_r_vlan_table(dev, vid, &data); + ksz8795_from_vlan(data, &fid, &member, &valid); + + /* First time to setup the VLAN entry. */ + if (!valid) { + /* Need to find a way to map VID to FID. */ + fid = 1; + valid = 1; + } + member |= BIT(port); + + ksz8795_to_vlan(fid, member, valid, &data); + ksz8795_w_vlan_table(dev, vid, data); + + /* change PVID */ + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) + new_pvid = vid; + } + + if (new_pvid) { + ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid); + vid &= 0xfff; + vid |= new_pvid; + ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid); + } +} + +static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + struct ksz_device *dev = ds->priv; + u16 data, vid, pvid, new_pvid = 0; + u8 fid, member, valid; + + ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid); + pvid = pvid & 0xFFF; + + ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + ksz8795_r_vlan_table(dev, vid, &data); + ksz8795_from_vlan(data, &fid, &member, &valid); + + member &= ~BIT(port); + + /* Invalidate the entry if no more member. */ + if (!member) { + fid = 0; + valid = 0; + } + + if (pvid == vid) + new_pvid = 1; + + ksz8795_to_vlan(fid, member, valid, &data); + ksz8795_w_vlan_table(dev, vid, data); + } + + if (new_pvid != pvid) + ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid); + + return 0; +} + +static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress) +{ + struct ksz_device *dev = ds->priv; + + if (ingress) { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + dev->mirror_rx |= BIT(port); + } else { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + dev->mirror_tx |= BIT(port); + } + + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); + + /* configure mirror port */ + if (dev->mirror_rx || dev->mirror_tx) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, true); + + return 0; +} + +static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct ksz_device *dev = ds->priv; + u8 data; + + if (mirror->ingress) { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + dev->mirror_rx &= ~BIT(port); + } else { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + dev->mirror_tx &= ~BIT(port); + } + + ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + + if (!dev->mirror_rx && !dev->mirror_tx) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, false); +} + +static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + struct ksz_port *p = &dev->ports[port]; + u8 data8, member; + + /* enable broadcast storm limit */ + ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); + + ksz8795_set_prio_queue(dev, port, 4); + + /* disable DiffServ priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false); + + /* replace priority */ + ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false); + + /* enable 802.1p priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true); + + if (cpu_port) { + /* Configure MII interface for proper network communication. */ + ksz_read8(dev, REG_PORT_5_CTRL_6, &data8); + data8 &= ~PORT_INTERFACE_TYPE; + data8 &= ~PORT_GMII_1GPS_MODE; + switch (dev->interface) { + case PHY_INTERFACE_MODE_MII: + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_RMII: + data8 |= PORT_INTERFACE_RMII; + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_GMII: + data8 |= PORT_GMII_1GPS_MODE; + data8 |= PORT_INTERFACE_GMII; + p->phydev.speed = SPEED_1000; + break; + default: + data8 &= ~PORT_RGMII_ID_IN_ENABLE; + data8 &= ~PORT_RGMII_ID_OUT_ENABLE; + if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || + dev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + data8 |= PORT_RGMII_ID_IN_ENABLE; + if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || + dev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + data8 |= PORT_RGMII_ID_OUT_ENABLE; + data8 |= PORT_GMII_1GPS_MODE; + data8 |= PORT_INTERFACE_RGMII; + p->phydev.speed = SPEED_1000; + break; + } + ksz_write8(dev, REG_PORT_5_CTRL_6, data8); + p->phydev.duplex = 1; + + member = dev->port_mask; + dev->on_ports = dev->host_mask; + dev->live_ports = dev->host_mask; + } else { + member = dev->host_mask | p->vid_member; + dev->on_ports |= BIT(port); + + /* Link was detected before port is enabled. */ + if (p->phydev.link) + dev->live_ports |= BIT(port); + } + ksz8795_cfg_port_member(dev, port, member); +} + +static void ksz8795_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p; + u8 remote; + int i; + + ds->num_ports = dev->port_cnt + 1; + + /* Switch marks the maximum frame with extra byte as oversize. */ + ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true); + ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true); + + p = &dev->ports[dev->cpu_port]; + p->vid_member = dev->port_mask; + p->on = 1; + + ksz8795_port_setup(dev, dev->cpu_port, true); + dev->member = dev->host_mask; + + for (i = 0; i < SWITCH_PORT_NUM; i++) { + p = &dev->ports[i]; + + /* Initialize to non-zero so that ksz_cfg_port_member() will + * be called. + */ + p->vid_member = BIT(i); + p->member = dev->port_mask; + ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED); + + /* Last port may be disabled. */ + if (i == dev->port_cnt) + break; + p->on = 1; + p->phy = 1; + } + for (i = 0; i < dev->phy_port_cnt; i++) { + p = &dev->ports[i]; + if (!p->on) + continue; + ksz_pread8(dev, i, P_REMOTE_STATUS, &remote); + if (remote & PORT_FIBER_MODE) + p->fiber = 1; + if (p->fiber) + ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL, + true); + else + ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL, + false); + } +} + +static int ksz8795_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct alu_struct alu; + int i, ret = 0; + + dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), + dev->num_vlans, GFP_KERNEL); + if (!dev->vlan_cache) + return -ENOMEM; + + ret = ksz8795_reset_switch(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); + return ret; + } + + ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true); + + /* Enable automatic fast aging when link changed detected. */ + ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); + + /* Enable aggressive back off algorithm in half duplex mode. */ + regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1, + SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + + /* + * Make sure unicast VLAN boundary is set as default and + * enable no excessive collision drop. + */ + regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + + ksz8795_config_cpu_port(ds); + + ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true); + + ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); + + ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); + + /* set broadcast storm protection 10% rate */ + regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL, + BROADCAST_STORM_RATE, + (BROADCAST_STORM_VALUE * + BROADCAST_STORM_PROT_RATE) / 100); + + for (i = 0; i < VLAN_TABLE_ENTRIES; i++) + ksz8795_r_vlan_entries(dev, i); + + /* Setup STP address for STP operation. */ + memset(&alu, 0, sizeof(alu)); + ether_addr_copy(alu.mac, eth_stp_addr); + alu.is_static = true; + alu.is_override = true; + alu.port_forward = dev->host_mask; + + ksz8795_w_sta_mac_table(dev, 0, &alu); + + ksz_init_mib_timer(dev); + + return 0; +} + +static const struct dsa_switch_ops ksz8795_switch_ops = { + .get_tag_protocol = ksz8795_get_tag_protocol, + .setup = ksz8795_setup, + .phy_read = ksz_phy_read16, + .phy_write = ksz_phy_write16, + .adjust_link = ksz_adjust_link, + .port_enable = ksz_enable_port, + .port_disable = ksz_disable_port, + .get_strings = ksz8795_get_strings, + .get_ethtool_stats = ksz_get_ethtool_stats, + .get_sset_count = ksz_sset_count, + .port_bridge_join = ksz_port_bridge_join, + .port_bridge_leave = ksz_port_bridge_leave, + .port_stp_state_set = ksz8795_port_stp_state_set, + .port_fast_age = ksz_port_fast_age, + .port_vlan_filtering = ksz8795_port_vlan_filtering, + .port_vlan_prepare = ksz_port_vlan_prepare, + .port_vlan_add = ksz8795_port_vlan_add, + .port_vlan_del = ksz8795_port_vlan_del, + .port_fdb_dump = ksz_port_fdb_dump, + .port_mdb_prepare = ksz_port_mdb_prepare, + .port_mdb_add = ksz_port_mdb_add, + .port_mdb_del = ksz_port_mdb_del, + .port_mirror_add = ksz8795_port_mirror_add, + .port_mirror_del = ksz8795_port_mirror_del, +}; + +static u32 ksz8795_get_port_addr(int port, int offset) +{ + return PORT_CTRL_ADDR(port, offset); +} + +static int ksz8795_switch_detect(struct ksz_device *dev) +{ + u8 id1, id2; + u16 id16; + int ret; + + /* read chip id */ + ret = ksz_read16(dev, REG_CHIP_ID0, &id16); + if (ret) + return ret; + + id1 = id16 >> 8; + id2 = id16 & SW_CHIP_ID_M; + if (id1 != FAMILY_ID || + (id2 != CHIP_ID_94 && id2 != CHIP_ID_95)) + return -ENODEV; + + dev->mib_port_cnt = TOTAL_PORT_NUM; + dev->phy_port_cnt = SWITCH_PORT_NUM; + dev->port_cnt = SWITCH_PORT_NUM; + + if (id2 == CHIP_ID_95) { + u8 val; + + id2 = 0x95; + ksz_read8(dev, REG_PORT_1_STATUS_0, &val); + if (val & PORT_FIBER_MODE) + id2 = 0x65; + } else if (id2 == CHIP_ID_94) { + dev->port_cnt--; + dev->last_port = dev->port_cnt; + id2 = 0x94; + } + id16 &= ~0xff; + id16 |= id2; + dev->chip_id = id16; + + dev->cpu_port = dev->mib_port_cnt - 1; + dev->host_mask = BIT(dev->cpu_port); + + return 0; +} + +struct ksz_chip_data { + u16 chip_id; + const char *dev_name; + int num_vlans; + int num_alus; + int num_statics; + int cpu_ports; + int port_cnt; +}; + +static const struct ksz_chip_data ksz8795_switch_chips[] = { + { + .chip_id = 0x8795, + .dev_name = "KSZ8795", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 4, /* total physical port count */ + }, + { + .chip_id = 0x8794, + .dev_name = "KSZ8794", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 3, /* total physical port count */ + }, + { + .chip_id = 0x8765, + .dev_name = "KSZ8765", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 4, /* total physical port count */ + }, +}; + +static int ksz8795_switch_init(struct ksz_device *dev) +{ + int i; + + mutex_init(&dev->stats_mutex); + mutex_init(&dev->alu_mutex); + mutex_init(&dev->vlan_mutex); + + dev->ds->ops = &ksz8795_switch_ops; + + for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) { + const struct ksz_chip_data *chip = &ksz8795_switch_chips[i]; + + if (dev->chip_id == chip->chip_id) { + dev->name = chip->dev_name; + dev->num_vlans = chip->num_vlans; + dev->num_alus = chip->num_alus; + dev->num_statics = chip->num_statics; + dev->port_cnt = chip->port_cnt; + dev->cpu_ports = chip->cpu_ports; + + break; + } + } + + /* no switch found */ + if (!dev->cpu_ports) + return -ENODEV; + + dev->port_mask = BIT(dev->port_cnt) - 1; + dev->port_mask |= dev->host_mask; + + dev->reg_mib_cnt = SWITCH_COUNTER_NUM; + dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM; + + i = dev->mib_port_cnt; + dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i, + GFP_KERNEL); + if (!dev->ports) + return -ENOMEM; + for (i = 0; i < dev->mib_port_cnt; i++) { + mutex_init(&dev->ports[i].mib.cnt_mutex); + dev->ports[i].mib.counters = + devm_kzalloc(dev->dev, + sizeof(u64) * + (TOTAL_SWITCH_COUNTER_NUM + 1), + GFP_KERNEL); + if (!dev->ports[i].mib.counters) + return -ENOMEM; + } + + return 0; +} + +static void ksz8795_switch_exit(struct ksz_device *dev) +{ + ksz8795_reset_switch(dev); +} + +static const struct ksz_dev_ops ksz8795_dev_ops = { + .get_port_addr = ksz8795_get_port_addr, + .cfg_port_member = ksz8795_cfg_port_member, + .flush_dyn_mac_table = ksz8795_flush_dyn_mac_table, + .port_setup = ksz8795_port_setup, + .r_phy = ksz8795_r_phy, + .w_phy = ksz8795_w_phy, + .r_dyn_mac_table = ksz8795_r_dyn_mac_table, + .r_sta_mac_table = ksz8795_r_sta_mac_table, + .w_sta_mac_table = ksz8795_w_sta_mac_table, + .r_mib_cnt = ksz8795_r_mib_cnt, + .r_mib_pkt = ksz8795_r_mib_pkt, + .freeze_mib = ksz8795_freeze_mib, + .port_init_cnt = ksz8795_port_init_cnt, + .shutdown = ksz8795_reset_switch, + .detect = ksz8795_switch_detect, + .init = ksz8795_switch_init, + .exit = ksz8795_switch_exit, +}; + +int ksz8795_switch_register(struct ksz_device *dev) +{ + return ksz_switch_register(dev, &ksz8795_dev_ops); +} +EXPORT_SYMBOL(ksz8795_switch_register); + +MODULE_AUTHOR("Tristram Ha "); +MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h new file mode 100644 index 0000000..3a50462 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz8795_reg.h @@ -0,0 +1,1004 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Microchip KSZ8795 register definitions + * + * Copyright (c) 2017 Microchip Technology Inc. + * Tristram Ha + */ + +#ifndef __KSZ8795_REG_H +#define __KSZ8795_REG_H + +#define KS_PORT_M 0x1F + +#define KS_PRIO_M 0x3 +#define KS_PRIO_S 2 + +#define REG_CHIP_ID0 0x00 + +#define FAMILY_ID 0x87 + +#define REG_CHIP_ID1 0x01 + +#define SW_CHIP_ID_M 0xF0 +#define SW_CHIP_ID_S 4 +#define SW_REVISION_M 0x0E +#define SW_REVISION_S 1 +#define SW_START 0x01 + +#define CHIP_ID_94 0x60 +#define CHIP_ID_95 0x90 + +#define REG_SW_CTRL_0 0x02 + +#define SW_NEW_BACKOFF BIT(7) +#define SW_GLOBAL_RESET BIT(6) +#define SW_FLUSH_DYN_MAC_TABLE BIT(5) +#define SW_FLUSH_STA_MAC_TABLE BIT(4) +#define SW_LINK_AUTO_AGING BIT(0) + +#define REG_SW_CTRL_1 0x03 + +#define SW_HUGE_PACKET BIT(6) +#define SW_TX_FLOW_CTRL_DISABLE BIT(5) +#define SW_RX_FLOW_CTRL_DISABLE BIT(4) +#define SW_CHECK_LENGTH BIT(3) +#define SW_AGING_ENABLE BIT(2) +#define SW_FAST_AGING BIT(1) +#define SW_AGGR_BACKOFF BIT(0) + +#define REG_SW_CTRL_2 0x04 + +#define UNICAST_VLAN_BOUNDARY BIT(7) +#define MULTICAST_STORM_DISABLE BIT(6) +#define SW_BACK_PRESSURE BIT(5) +#define FAIR_FLOW_CTRL BIT(4) +#define NO_EXC_COLLISION_DROP BIT(3) +#define SW_LEGAL_PACKET_DISABLE BIT(1) + +#define REG_SW_CTRL_3 0x05 + #define WEIGHTED_FAIR_QUEUE_ENABLE BIT(3) + +#define SW_VLAN_ENABLE BIT(7) +#define SW_IGMP_SNOOP BIT(6) +#define SW_MIRROR_RX_TX BIT(0) + +#define REG_SW_CTRL_4 0x06 + +#define SW_HALF_DUPLEX_FLOW_CTRL BIT(7) +#define SW_HALF_DUPLEX BIT(6) +#define SW_FLOW_CTRL BIT(5) +#define SW_10_MBIT BIT(4) +#define SW_REPLACE_VID BIT(3) +#define BROADCAST_STORM_RATE_HI 0x07 + +#define REG_SW_CTRL_5 0x07 + +#define BROADCAST_STORM_RATE_LO 0xFF +#define BROADCAST_STORM_RATE 0x07FF + +#define REG_SW_CTRL_6 0x08 + +#define SW_MIB_COUNTER_FLUSH BIT(7) +#define SW_MIB_COUNTER_FREEZE BIT(6) +#define SW_MIB_COUNTER_CTRL_ENABLE KS_PORT_M + +#define REG_SW_CTRL_9 0x0B + +#define SPI_CLK_125_MHZ 0x80 +#define SPI_CLK_62_5_MHZ 0x40 +#define SPI_CLK_31_25_MHZ 0x00 + +#define SW_LED_MODE_M 0x3 +#define SW_LED_MODE_S 4 +#define SW_LED_LINK_ACT_SPEED 0 +#define SW_LED_LINK_ACT 1 +#define SW_LED_LINK_ACT_DUPLEX 2 +#define SW_LED_LINK_DUPLEX 3 + +#define REG_SW_CTRL_10 0x0C + +#define SW_TAIL_TAG_ENABLE BIT(1) +#define SW_PASS_PAUSE BIT(0) + +#define REG_SW_CTRL_11 0x0D + +#define REG_POWER_MANAGEMENT_1 0x0E + +#define SW_PLL_POWER_DOWN BIT(5) +#define SW_POWER_MANAGEMENT_MODE_M 0x3 +#define SW_POWER_MANAGEMENT_MODE_S 3 +#define SW_POWER_NORMAL 0 +#define SW_ENERGY_DETECTION 1 +#define SW_SOFTWARE_POWER_DOWN 2 + +#define REG_POWER_MANAGEMENT_2 0x0F + +#define REG_PORT_1_CTRL_0 0x10 +#define REG_PORT_2_CTRL_0 0x20 +#define REG_PORT_3_CTRL_0 0x30 +#define REG_PORT_4_CTRL_0 0x40 +#define REG_PORT_5_CTRL_0 0x50 + +#define PORT_BROADCAST_STORM BIT(7) +#define PORT_DIFFSERV_ENABLE BIT(6) +#define PORT_802_1P_ENABLE BIT(5) +#define PORT_BASED_PRIO_S 3 +#define PORT_BASED_PRIO_M KS_PRIO_M +#define PORT_BASED_PRIO_0 0 +#define PORT_BASED_PRIO_1 1 +#define PORT_BASED_PRIO_2 2 +#define PORT_BASED_PRIO_3 3 +#define PORT_INSERT_TAG BIT(2) +#define PORT_REMOVE_TAG BIT(1) +#define PORT_QUEUE_SPLIT_L BIT(0) + +#define REG_PORT_1_CTRL_1 0x11 +#define REG_PORT_2_CTRL_1 0x21 +#define REG_PORT_3_CTRL_1 0x31 +#define REG_PORT_4_CTRL_1 0x41 +#define REG_PORT_5_CTRL_1 0x51 + +#define PORT_MIRROR_SNIFFER BIT(7) +#define PORT_MIRROR_RX BIT(6) +#define PORT_MIRROR_TX BIT(5) +#define PORT_VLAN_MEMBERSHIP KS_PORT_M + +#define REG_PORT_1_CTRL_2 0x12 +#define REG_PORT_2_CTRL_2 0x22 +#define REG_PORT_3_CTRL_2 0x32 +#define REG_PORT_4_CTRL_2 0x42 +#define REG_PORT_5_CTRL_2 0x52 + +#define PORT_802_1P_REMAPPING BIT(7) +#define PORT_INGRESS_FILTER BIT(6) +#define PORT_DISCARD_NON_VID BIT(5) +#define PORT_FORCE_FLOW_CTRL BIT(4) +#define PORT_BACK_PRESSURE BIT(3) +#define PORT_TX_ENABLE BIT(2) +#define PORT_RX_ENABLE BIT(1) +#define PORT_LEARN_DISABLE BIT(0) + +#define REG_PORT_1_CTRL_3 0x13 +#define REG_PORT_2_CTRL_3 0x23 +#define REG_PORT_3_CTRL_3 0x33 +#define REG_PORT_4_CTRL_3 0x43 +#define REG_PORT_5_CTRL_3 0x53 +#define REG_PORT_1_CTRL_4 0x14 +#define REG_PORT_2_CTRL_4 0x24 +#define REG_PORT_3_CTRL_4 0x34 +#define REG_PORT_4_CTRL_4 0x44 +#define REG_PORT_5_CTRL_4 0x54 + +#define PORT_DEFAULT_VID 0x0001 + +#define REG_PORT_1_CTRL_5 0x15 +#define REG_PORT_2_CTRL_5 0x25 +#define REG_PORT_3_CTRL_5 0x35 +#define REG_PORT_4_CTRL_5 0x45 +#define REG_PORT_5_CTRL_5 0x55 + +#define PORT_ACL_ENABLE BIT(2) +#define PORT_AUTHEN_MODE 0x3 +#define PORT_AUTHEN_PASS 0 +#define PORT_AUTHEN_BLOCK 1 +#define PORT_AUTHEN_TRAP 2 + +#define REG_PORT_5_CTRL_6 0x56 + +#define PORT_MII_INTERNAL_CLOCK BIT(7) +#define PORT_GMII_1GPS_MODE BIT(6) +#define PORT_RGMII_ID_IN_ENABLE BIT(4) +#define PORT_RGMII_ID_OUT_ENABLE BIT(3) +#define PORT_GMII_MAC_MODE BIT(2) +#define PORT_INTERFACE_TYPE 0x3 +#define PORT_INTERFACE_MII 0 +#define PORT_INTERFACE_RMII 1 +#define PORT_INTERFACE_GMII 2 +#define PORT_INTERFACE_RGMII 3 + +#define REG_PORT_1_CTRL_7 0x17 +#define REG_PORT_2_CTRL_7 0x27 +#define REG_PORT_3_CTRL_7 0x37 +#define REG_PORT_4_CTRL_7 0x47 + +#define PORT_AUTO_NEG_ASYM_PAUSE BIT(5) +#define PORT_AUTO_NEG_SYM_PAUSE BIT(4) +#define PORT_AUTO_NEG_100BTX_FD BIT(3) +#define PORT_AUTO_NEG_100BTX BIT(2) +#define PORT_AUTO_NEG_10BT_FD BIT(1) +#define PORT_AUTO_NEG_10BT BIT(0) + +#define REG_PORT_1_STATUS_0 0x18 +#define REG_PORT_2_STATUS_0 0x28 +#define REG_PORT_3_STATUS_0 0x38 +#define REG_PORT_4_STATUS_0 0x48 + +/* For KSZ8765. */ +#define PORT_FIBER_MODE BIT(7) + +#define PORT_REMOTE_ASYM_PAUSE BIT(5) +#define PORT_REMOTE_SYM_PAUSE BIT(4) +#define PORT_REMOTE_100BTX_FD BIT(3) +#define PORT_REMOTE_100BTX BIT(2) +#define PORT_REMOTE_10BT_FD BIT(1) +#define PORT_REMOTE_10BT BIT(0) + +#define REG_PORT_1_STATUS_1 0x19 +#define REG_PORT_2_STATUS_1 0x29 +#define REG_PORT_3_STATUS_1 0x39 +#define REG_PORT_4_STATUS_1 0x49 + +#define PORT_HP_MDIX BIT(7) +#define PORT_REVERSED_POLARITY BIT(5) +#define PORT_TX_FLOW_CTRL BIT(4) +#define PORT_RX_FLOW_CTRL BIT(3) +#define PORT_STAT_SPEED_100MBIT BIT(2) +#define PORT_STAT_FULL_DUPLEX BIT(1) + +#define PORT_REMOTE_FAULT BIT(0) + +#define REG_PORT_1_LINK_MD_CTRL 0x1A +#define REG_PORT_2_LINK_MD_CTRL 0x2A +#define REG_PORT_3_LINK_MD_CTRL 0x3A +#define REG_PORT_4_LINK_MD_CTRL 0x4A + +#define PORT_CABLE_10M_SHORT BIT(7) +#define PORT_CABLE_DIAG_RESULT_M 0x3 +#define PORT_CABLE_DIAG_RESULT_S 5 +#define PORT_CABLE_STAT_NORMAL 0 +#define PORT_CABLE_STAT_OPEN 1 +#define PORT_CABLE_STAT_SHORT 2 +#define PORT_CABLE_STAT_FAILED 3 +#define PORT_START_CABLE_DIAG BIT(4) +#define PORT_FORCE_LINK BIT(3) +#define PORT_POWER_SAVING BIT(2) +#define PORT_PHY_REMOTE_LOOPBACK BIT(1) +#define PORT_CABLE_FAULT_COUNTER_H 0x01 + +#define REG_PORT_1_LINK_MD_RESULT 0x1B +#define REG_PORT_2_LINK_MD_RESULT 0x2B +#define REG_PORT_3_LINK_MD_RESULT 0x3B +#define REG_PORT_4_LINK_MD_RESULT 0x4B + +#define PORT_CABLE_FAULT_COUNTER_L 0xFF +#define PORT_CABLE_FAULT_COUNTER 0x1FF + +#define REG_PORT_1_CTRL_9 0x1C +#define REG_PORT_2_CTRL_9 0x2C +#define REG_PORT_3_CTRL_9 0x3C +#define REG_PORT_4_CTRL_9 0x4C + +#define PORT_AUTO_NEG_DISABLE BIT(7) +#define PORT_FORCE_100_MBIT BIT(6) +#define PORT_FORCE_FULL_DUPLEX BIT(5) + +#define REG_PORT_1_CTRL_10 0x1D +#define REG_PORT_2_CTRL_10 0x2D +#define REG_PORT_3_CTRL_10 0x3D +#define REG_PORT_4_CTRL_10 0x4D + +#define PORT_LED_OFF BIT(7) +#define PORT_TX_DISABLE BIT(6) +#define PORT_AUTO_NEG_RESTART BIT(5) +#define PORT_POWER_DOWN BIT(3) +#define PORT_AUTO_MDIX_DISABLE BIT(2) +#define PORT_FORCE_MDIX BIT(1) +#define PORT_MAC_LOOPBACK BIT(0) + +#define REG_PORT_1_STATUS_2 0x1E +#define REG_PORT_2_STATUS_2 0x2E +#define REG_PORT_3_STATUS_2 0x3E +#define REG_PORT_4_STATUS_2 0x4E + +#define PORT_MDIX_STATUS BIT(7) +#define PORT_AUTO_NEG_COMPLETE BIT(6) +#define PORT_STAT_LINK_GOOD BIT(5) + +#define REG_PORT_1_STATUS_3 0x1F +#define REG_PORT_2_STATUS_3 0x2F +#define REG_PORT_3_STATUS_3 0x3F +#define REG_PORT_4_STATUS_3 0x4F + +#define PORT_PHY_LOOPBACK BIT(7) +#define PORT_PHY_ISOLATE BIT(5) +#define PORT_PHY_SOFT_RESET BIT(4) +#define PORT_PHY_FORCE_LINK BIT(3) +#define PORT_PHY_MODE_M 0x7 +#define PHY_MODE_IN_AUTO_NEG 1 +#define PHY_MODE_10BT_HALF 2 +#define PHY_MODE_100BT_HALF 3 +#define PHY_MODE_10BT_FULL 5 +#define PHY_MODE_100BT_FULL 6 +#define PHY_MODE_ISOLDATE 7 + +#define REG_PORT_CTRL_0 0x00 +#define REG_PORT_CTRL_1 0x01 +#define REG_PORT_CTRL_2 0x02 +#define REG_PORT_CTRL_VID 0x03 + +#define REG_PORT_CTRL_5 0x05 + +#define REG_PORT_CTRL_7 0x07 +#define REG_PORT_STATUS_0 0x08 +#define REG_PORT_STATUS_1 0x09 +#define REG_PORT_LINK_MD_CTRL 0x0A +#define REG_PORT_LINK_MD_RESULT 0x0B +#define REG_PORT_CTRL_9 0x0C +#define REG_PORT_CTRL_10 0x0D +#define REG_PORT_STATUS_2 0x0E +#define REG_PORT_STATUS_3 0x0F + +#define REG_PORT_CTRL_12 0xA0 +#define REG_PORT_CTRL_13 0xA1 +#define REG_PORT_RATE_CTRL_3 0xA2 +#define REG_PORT_RATE_CTRL_2 0xA3 +#define REG_PORT_RATE_CTRL_1 0xA4 +#define REG_PORT_RATE_CTRL_0 0xA5 +#define REG_PORT_RATE_LIMIT 0xA6 +#define REG_PORT_IN_RATE_0 0xA7 +#define REG_PORT_IN_RATE_1 0xA8 +#define REG_PORT_IN_RATE_2 0xA9 +#define REG_PORT_IN_RATE_3 0xAA +#define REG_PORT_OUT_RATE_0 0xAB +#define REG_PORT_OUT_RATE_1 0xAC +#define REG_PORT_OUT_RATE_2 0xAD +#define REG_PORT_OUT_RATE_3 0xAE + +#define PORT_CTRL_ADDR(port, addr) \ + ((addr) + REG_PORT_1_CTRL_0 + (port) * \ + (REG_PORT_2_CTRL_0 - REG_PORT_1_CTRL_0)) + +#define REG_SW_MAC_ADDR_0 0x68 +#define REG_SW_MAC_ADDR_1 0x69 +#define REG_SW_MAC_ADDR_2 0x6A +#define REG_SW_MAC_ADDR_3 0x6B +#define REG_SW_MAC_ADDR_4 0x6C +#define REG_SW_MAC_ADDR_5 0x6D + +#define REG_IND_CTRL_0 0x6E + +#define TABLE_EXT_SELECT_S 5 +#define TABLE_EEE_V 1 +#define TABLE_ACL_V 2 +#define TABLE_PME_V 4 +#define TABLE_LINK_MD_V 5 +#define TABLE_EEE (TABLE_EEE_V << TABLE_EXT_SELECT_S) +#define TABLE_ACL (TABLE_ACL_V << TABLE_EXT_SELECT_S) +#define TABLE_PME (TABLE_PME_V << TABLE_EXT_SELECT_S) +#define TABLE_LINK_MD (TABLE_LINK_MD << TABLE_EXT_SELECT_S) +#define TABLE_READ BIT(4) +#define TABLE_SELECT_S 2 +#define TABLE_STATIC_MAC_V 0 +#define TABLE_VLAN_V 1 +#define TABLE_DYNAMIC_MAC_V 2 +#define TABLE_MIB_V 3 +#define TABLE_STATIC_MAC (TABLE_STATIC_MAC_V << TABLE_SELECT_S) +#define TABLE_VLAN (TABLE_VLAN_V << TABLE_SELECT_S) +#define TABLE_DYNAMIC_MAC (TABLE_DYNAMIC_MAC_V << TABLE_SELECT_S) +#define TABLE_MIB (TABLE_MIB_V << TABLE_SELECT_S) + +#define REG_IND_CTRL_1 0x6F + +#define TABLE_ENTRY_MASK 0x03FF +#define TABLE_EXT_ENTRY_MASK 0x0FFF + +#define REG_IND_DATA_8 0x70 +#define REG_IND_DATA_7 0x71 +#define REG_IND_DATA_6 0x72 +#define REG_IND_DATA_5 0x73 +#define REG_IND_DATA_4 0x74 +#define REG_IND_DATA_3 0x75 +#define REG_IND_DATA_2 0x76 +#define REG_IND_DATA_1 0x77 +#define REG_IND_DATA_0 0x78 + +#define REG_IND_DATA_PME_EEE_ACL 0xA0 + +#define REG_IND_DATA_CHECK REG_IND_DATA_6 +#define REG_IND_MIB_CHECK REG_IND_DATA_4 +#define REG_IND_DATA_HI REG_IND_DATA_7 +#define REG_IND_DATA_LO REG_IND_DATA_3 + +#define REG_INT_STATUS 0x7C +#define REG_INT_ENABLE 0x7D + +#define INT_PME BIT(4) + +#define REG_ACL_INT_STATUS 0x7E +#define REG_ACL_INT_ENABLE 0x7F + +#define INT_PORT_5 BIT(4) +#define INT_PORT_4 BIT(3) +#define INT_PORT_3 BIT(2) +#define INT_PORT_2 BIT(1) +#define INT_PORT_1 BIT(0) + +#define INT_PORT_ALL \ + (INT_PORT_5 | INT_PORT_4 | INT_PORT_3 | INT_PORT_2 | INT_PORT_1) + +#define REG_SW_CTRL_12 0x80 +#define REG_SW_CTRL_13 0x81 + +#define SWITCH_802_1P_MASK 3 +#define SWITCH_802_1P_BASE 3 +#define SWITCH_802_1P_SHIFT 2 + +#define SW_802_1P_MAP_M KS_PRIO_M +#define SW_802_1P_MAP_S KS_PRIO_S + +#define REG_SWITCH_CTRL_14 0x82 + +#define SW_PRIO_MAPPING_M KS_PRIO_M +#define SW_PRIO_MAPPING_S 6 +#define SW_PRIO_MAP_3_HI 0 +#define SW_PRIO_MAP_2_HI 2 +#define SW_PRIO_MAP_0_LO 3 + +#define REG_SW_CTRL_15 0x83 +#define REG_SW_CTRL_16 0x84 +#define REG_SW_CTRL_17 0x85 +#define REG_SW_CTRL_18 0x86 + +#define SW_SELF_ADDR_FILTER_ENABLE BIT(6) + +#define REG_SW_UNK_UCAST_CTRL 0x83 +#define REG_SW_UNK_MCAST_CTRL 0x84 +#define REG_SW_UNK_VID_CTRL 0x85 +#define REG_SW_UNK_IP_MCAST_CTRL 0x86 + +#define SW_UNK_FWD_ENABLE BIT(5) +#define SW_UNK_FWD_MAP KS_PORT_M + +#define REG_SW_CTRL_19 0x87 + +#define SW_IN_RATE_LIMIT_PERIOD_M 0x3 +#define SW_IN_RATE_LIMIT_PERIOD_S 4 +#define SW_IN_RATE_LIMIT_16_MS 0 +#define SW_IN_RATE_LIMIT_64_MS 1 +#define SW_IN_RATE_LIMIT_256_MS 2 +#define SW_OUT_RATE_LIMIT_QUEUE_BASED BIT(3) +#define SW_INS_TAG_ENABLE BIT(2) + +#define REG_TOS_PRIO_CTRL_0 0x90 +#define REG_TOS_PRIO_CTRL_1 0x91 +#define REG_TOS_PRIO_CTRL_2 0x92 +#define REG_TOS_PRIO_CTRL_3 0x93 +#define REG_TOS_PRIO_CTRL_4 0x94 +#define REG_TOS_PRIO_CTRL_5 0x95 +#define REG_TOS_PRIO_CTRL_6 0x96 +#define REG_TOS_PRIO_CTRL_7 0x97 +#define REG_TOS_PRIO_CTRL_8 0x98 +#define REG_TOS_PRIO_CTRL_9 0x99 +#define REG_TOS_PRIO_CTRL_10 0x9A +#define REG_TOS_PRIO_CTRL_11 0x9B +#define REG_TOS_PRIO_CTRL_12 0x9C +#define REG_TOS_PRIO_CTRL_13 0x9D +#define REG_TOS_PRIO_CTRL_14 0x9E +#define REG_TOS_PRIO_CTRL_15 0x9F + +#define TOS_PRIO_M KS_PRIO_M +#define TOS_PRIO_S KS_PRIO_S + +#define REG_SW_CTRL_20 0xA3 + +#define SW_GMII_DRIVE_STRENGTH_S 4 +#define SW_DRIVE_STRENGTH_M 0x7 +#define SW_DRIVE_STRENGTH_2MA 0 +#define SW_DRIVE_STRENGTH_4MA 1 +#define SW_DRIVE_STRENGTH_8MA 2 +#define SW_DRIVE_STRENGTH_12MA 3 +#define SW_DRIVE_STRENGTH_16MA 4 +#define SW_DRIVE_STRENGTH_20MA 5 +#define SW_DRIVE_STRENGTH_24MA 6 +#define SW_DRIVE_STRENGTH_28MA 7 +#define SW_MII_DRIVE_STRENGTH_S 0 + +#define REG_SW_CTRL_21 0xA4 + +#define SW_IPV6_MLD_OPTION BIT(3) +#define SW_IPV6_MLD_SNOOP BIT(2) + +#define REG_PORT_1_CTRL_12 0xB0 +#define REG_PORT_2_CTRL_12 0xC0 +#define REG_PORT_3_CTRL_12 0xD0 +#define REG_PORT_4_CTRL_12 0xE0 +#define REG_PORT_5_CTRL_12 0xF0 + +#define PORT_PASS_ALL BIT(6) +#define PORT_INS_TAG_FOR_PORT_5_S 3 +#define PORT_INS_TAG_FOR_PORT_5 BIT(3) +#define PORT_INS_TAG_FOR_PORT_4 BIT(2) +#define PORT_INS_TAG_FOR_PORT_3 BIT(1) +#define PORT_INS_TAG_FOR_PORT_2 BIT(0) + +#define REG_PORT_1_CTRL_13 0xB1 +#define REG_PORT_2_CTRL_13 0xC1 +#define REG_PORT_3_CTRL_13 0xD1 +#define REG_PORT_4_CTRL_13 0xE1 +#define REG_PORT_5_CTRL_13 0xF1 + +#define PORT_QUEUE_SPLIT_H BIT(1) +#define PORT_QUEUE_SPLIT_1 0 +#define PORT_QUEUE_SPLIT_2 1 +#define PORT_QUEUE_SPLIT_4 2 +#define PORT_DROP_TAG BIT(0) + +#define REG_PORT_1_CTRL_14 0xB2 +#define REG_PORT_2_CTRL_14 0xC2 +#define REG_PORT_3_CTRL_14 0xD2 +#define REG_PORT_4_CTRL_14 0xE2 +#define REG_PORT_5_CTRL_14 0xF2 +#define REG_PORT_1_CTRL_15 0xB3 +#define REG_PORT_2_CTRL_15 0xC3 +#define REG_PORT_3_CTRL_15 0xD3 +#define REG_PORT_4_CTRL_15 0xE3 +#define REG_PORT_5_CTRL_15 0xF3 +#define REG_PORT_1_CTRL_16 0xB4 +#define REG_PORT_2_CTRL_16 0xC4 +#define REG_PORT_3_CTRL_16 0xD4 +#define REG_PORT_4_CTRL_16 0xE4 +#define REG_PORT_5_CTRL_16 0xF4 +#define REG_PORT_1_CTRL_17 0xB5 +#define REG_PORT_2_CTRL_17 0xC5 +#define REG_PORT_3_CTRL_17 0xD5 +#define REG_PORT_4_CTRL_17 0xE5 +#define REG_PORT_5_CTRL_17 0xF5 + +#define REG_PORT_1_RATE_CTRL_3 0xB2 +#define REG_PORT_1_RATE_CTRL_2 0xB3 +#define REG_PORT_1_RATE_CTRL_1 0xB4 +#define REG_PORT_1_RATE_CTRL_0 0xB5 +#define REG_PORT_2_RATE_CTRL_3 0xC2 +#define REG_PORT_2_RATE_CTRL_2 0xC3 +#define REG_PORT_2_RATE_CTRL_1 0xC4 +#define REG_PORT_2_RATE_CTRL_0 0xC5 +#define REG_PORT_3_RATE_CTRL_3 0xD2 +#define REG_PORT_3_RATE_CTRL_2 0xD3 +#define REG_PORT_3_RATE_CTRL_1 0xD4 +#define REG_PORT_3_RATE_CTRL_0 0xD5 +#define REG_PORT_4_RATE_CTRL_3 0xE2 +#define REG_PORT_4_RATE_CTRL_2 0xE3 +#define REG_PORT_4_RATE_CTRL_1 0xE4 +#define REG_PORT_4_RATE_CTRL_0 0xE5 +#define REG_PORT_5_RATE_CTRL_3 0xF2 +#define REG_PORT_5_RATE_CTRL_2 0xF3 +#define REG_PORT_5_RATE_CTRL_1 0xF4 +#define REG_PORT_5_RATE_CTRL_0 0xF5 + +#define RATE_CTRL_ENABLE BIT(7) +#define RATE_RATIO_M (BIT(7) - 1) + +#define PORT_OUT_RATE_ENABLE BIT(7) + +#define REG_PORT_1_RATE_LIMIT 0xB6 +#define REG_PORT_2_RATE_LIMIT 0xC6 +#define REG_PORT_3_RATE_LIMIT 0xD6 +#define REG_PORT_4_RATE_LIMIT 0xE6 +#define REG_PORT_5_RATE_LIMIT 0xF6 + +#define PORT_IN_PORT_BASED_S 6 +#define PORT_RATE_PACKET_BASED_S 5 +#define PORT_IN_FLOW_CTRL_S 4 +#define PORT_IN_LIMIT_MODE_M 0x3 +#define PORT_IN_LIMIT_MODE_S 2 +#define PORT_COUNT_IFG_S 1 +#define PORT_COUNT_PREAMBLE_S 0 +#define PORT_IN_PORT_BASED BIT(PORT_IN_PORT_BASED_S) +#define PORT_RATE_PACKET_BASED BIT(PORT_RATE_PACKET_BASED_S) +#define PORT_IN_FLOW_CTRL BIT(PORT_IN_FLOW_CTRL_S) +#define PORT_IN_ALL 0 +#define PORT_IN_UNICAST 1 +#define PORT_IN_MULTICAST 2 +#define PORT_IN_BROADCAST 3 +#define PORT_COUNT_IFG BIT(PORT_COUNT_IFG_S) +#define PORT_COUNT_PREAMBLE BIT(PORT_COUNT_PREAMBLE_S) + +#define REG_PORT_1_IN_RATE_0 0xB7 +#define REG_PORT_2_IN_RATE_0 0xC7 +#define REG_PORT_3_IN_RATE_0 0xD7 +#define REG_PORT_4_IN_RATE_0 0xE7 +#define REG_PORT_5_IN_RATE_0 0xF7 +#define REG_PORT_1_IN_RATE_1 0xB8 +#define REG_PORT_2_IN_RATE_1 0xC8 +#define REG_PORT_3_IN_RATE_1 0xD8 +#define REG_PORT_4_IN_RATE_1 0xE8 +#define REG_PORT_5_IN_RATE_1 0xF8 +#define REG_PORT_1_IN_RATE_2 0xB9 +#define REG_PORT_2_IN_RATE_2 0xC9 +#define REG_PORT_3_IN_RATE_2 0xD9 +#define REG_PORT_4_IN_RATE_2 0xE9 +#define REG_PORT_5_IN_RATE_2 0xF9 +#define REG_PORT_1_IN_RATE_3 0xBA +#define REG_PORT_2_IN_RATE_3 0xCA +#define REG_PORT_3_IN_RATE_3 0xDA +#define REG_PORT_4_IN_RATE_3 0xEA +#define REG_PORT_5_IN_RATE_3 0xFA + +#define PORT_IN_RATE_ENABLE BIT(7) +#define PORT_RATE_LIMIT_M (BIT(7) - 1) + +#define REG_PORT_1_OUT_RATE_0 0xBB +#define REG_PORT_2_OUT_RATE_0 0xCB +#define REG_PORT_3_OUT_RATE_0 0xDB +#define REG_PORT_4_OUT_RATE_0 0xEB +#define REG_PORT_5_OUT_RATE_0 0xFB +#define REG_PORT_1_OUT_RATE_1 0xBC +#define REG_PORT_2_OUT_RATE_1 0xCC +#define REG_PORT_3_OUT_RATE_1 0xDC +#define REG_PORT_4_OUT_RATE_1 0xEC +#define REG_PORT_5_OUT_RATE_1 0xFC +#define REG_PORT_1_OUT_RATE_2 0xBD +#define REG_PORT_2_OUT_RATE_2 0xCD +#define REG_PORT_3_OUT_RATE_2 0xDD +#define REG_PORT_4_OUT_RATE_2 0xED +#define REG_PORT_5_OUT_RATE_2 0xFD +#define REG_PORT_1_OUT_RATE_3 0xBE +#define REG_PORT_2_OUT_RATE_3 0xCE +#define REG_PORT_3_OUT_RATE_3 0xDE +#define REG_PORT_4_OUT_RATE_3 0xEE +#define REG_PORT_5_OUT_RATE_3 0xFE + +/* PME */ + +#define SW_PME_OUTPUT_ENABLE BIT(1) +#define SW_PME_ACTIVE_HIGH BIT(0) + +#define PORT_MAGIC_PACKET_DETECT BIT(2) +#define PORT_LINK_UP_DETECT BIT(1) +#define PORT_ENERGY_DETECT BIT(0) + +/* ACL */ + +#define ACL_FIRST_RULE_M 0xF + +#define ACL_MODE_M 0x3 +#define ACL_MODE_S 4 +#define ACL_MODE_DISABLE 0 +#define ACL_MODE_LAYER_2 1 +#define ACL_MODE_LAYER_3 2 +#define ACL_MODE_LAYER_4 3 +#define ACL_ENABLE_M 0x3 +#define ACL_ENABLE_S 2 +#define ACL_ENABLE_2_COUNT 0 +#define ACL_ENABLE_2_TYPE 1 +#define ACL_ENABLE_2_MAC 2 +#define ACL_ENABLE_2_BOTH 3 +#define ACL_ENABLE_3_IP 1 +#define ACL_ENABLE_3_SRC_DST_COMP 2 +#define ACL_ENABLE_4_PROTOCOL 0 +#define ACL_ENABLE_4_TCP_PORT_COMP 1 +#define ACL_ENABLE_4_UDP_PORT_COMP 2 +#define ACL_ENABLE_4_TCP_SEQN_COMP 3 +#define ACL_SRC BIT(1) +#define ACL_EQUAL BIT(0) + +#define ACL_MAX_PORT 0xFFFF + +#define ACL_MIN_PORT 0xFFFF +#define ACL_IP_ADDR 0xFFFFFFFF +#define ACL_TCP_SEQNUM 0xFFFFFFFF + +#define ACL_RESERVED 0xF8 +#define ACL_PORT_MODE_M 0x3 +#define ACL_PORT_MODE_S 1 +#define ACL_PORT_MODE_DISABLE 0 +#define ACL_PORT_MODE_EITHER 1 +#define ACL_PORT_MODE_IN_RANGE 2 +#define ACL_PORT_MODE_OUT_OF_RANGE 3 + +#define ACL_TCP_FLAG_ENABLE BIT(0) + +#define ACL_TCP_FLAG_M 0xFF + +#define ACL_TCP_FLAG 0xFF +#define ACL_ETH_TYPE 0xFFFF +#define ACL_IP_M 0xFFFFFFFF + +#define ACL_PRIO_MODE_M 0x3 +#define ACL_PRIO_MODE_S 6 +#define ACL_PRIO_MODE_DISABLE 0 +#define ACL_PRIO_MODE_HIGHER 1 +#define ACL_PRIO_MODE_LOWER 2 +#define ACL_PRIO_MODE_REPLACE 3 +#define ACL_PRIO_M 0x7 +#define ACL_PRIO_S 3 +#define ACL_VLAN_PRIO_REPLACE BIT(2) +#define ACL_VLAN_PRIO_M 0x7 +#define ACL_VLAN_PRIO_HI_M 0x3 + +#define ACL_VLAN_PRIO_LO_M 0x8 +#define ACL_VLAN_PRIO_S 7 +#define ACL_MAP_MODE_M 0x3 +#define ACL_MAP_MODE_S 5 +#define ACL_MAP_MODE_DISABLE 0 +#define ACL_MAP_MODE_OR 1 +#define ACL_MAP_MODE_AND 2 +#define ACL_MAP_MODE_REPLACE 3 +#define ACL_MAP_PORT_M 0x1F + +#define ACL_CNT_M (BIT(11) - 1) +#define ACL_CNT_S 5 +#define ACL_MSEC_UNIT BIT(4) +#define ACL_INTR_MODE BIT(3) + +#define REG_PORT_ACL_BYTE_EN_MSB 0x10 + +#define ACL_BYTE_EN_MSB_M 0x3F + +#define REG_PORT_ACL_BYTE_EN_LSB 0x11 + +#define ACL_ACTION_START 0xA +#define ACL_ACTION_LEN 2 +#define ACL_INTR_CNT_START 0xB +#define ACL_RULESET_START 0xC +#define ACL_RULESET_LEN 2 +#define ACL_TABLE_LEN 14 + +#define ACL_ACTION_ENABLE 0x000C +#define ACL_MATCH_ENABLE 0x1FF0 +#define ACL_RULESET_ENABLE 0x2003 +#define ACL_BYTE_ENABLE ((ACL_BYTE_EN_MSB_M << 8) | 0xFF) +#define ACL_MODE_ENABLE (0x10 << 8) + +#define REG_PORT_ACL_CTRL_0 0x12 + +#define PORT_ACL_WRITE_DONE BIT(6) +#define PORT_ACL_READ_DONE BIT(5) +#define PORT_ACL_WRITE BIT(4) +#define PORT_ACL_INDEX_M 0xF + +#define REG_PORT_ACL_CTRL_1 0x13 + +#define PORT_ACL_FORCE_DLR_MISS BIT(0) + +#ifndef PHY_REG_CTRL +#define PHY_REG_CTRL 0 + +#define PHY_RESET BIT(15) +#define PHY_LOOPBACK BIT(14) +#define PHY_SPEED_100MBIT BIT(13) +#define PHY_AUTO_NEG_ENABLE BIT(12) +#define PHY_POWER_DOWN BIT(11) +#define PHY_MII_DISABLE BIT(10) +#define PHY_AUTO_NEG_RESTART BIT(9) +#define PHY_FULL_DUPLEX BIT(8) +#define PHY_COLLISION_TEST_NOT BIT(7) +#define PHY_HP_MDIX BIT(5) +#define PHY_FORCE_MDIX BIT(4) +#define PHY_AUTO_MDIX_DISABLE BIT(3) +#define PHY_REMOTE_FAULT_DISABLE BIT(2) +#define PHY_TRANSMIT_DISABLE BIT(1) +#define PHY_LED_DISABLE BIT(0) + +#define PHY_REG_STATUS 1 + +#define PHY_100BT4_CAPABLE BIT(15) +#define PHY_100BTX_FD_CAPABLE BIT(14) +#define PHY_100BTX_CAPABLE BIT(13) +#define PHY_10BT_FD_CAPABLE BIT(12) +#define PHY_10BT_CAPABLE BIT(11) +#define PHY_MII_SUPPRESS_CAPABLE_NOT BIT(6) +#define PHY_AUTO_NEG_ACKNOWLEDGE BIT(5) +#define PHY_REMOTE_FAULT BIT(4) +#define PHY_AUTO_NEG_CAPABLE BIT(3) +#define PHY_LINK_STATUS BIT(2) +#define PHY_JABBER_DETECT_NOT BIT(1) +#define PHY_EXTENDED_CAPABILITY BIT(0) + +#define PHY_REG_ID_1 2 +#define PHY_REG_ID_2 3 + +#define PHY_REG_AUTO_NEGOTIATION 4 + +#define PHY_AUTO_NEG_NEXT_PAGE_NOT BIT(15) +#define PHY_AUTO_NEG_REMOTE_FAULT_NOT BIT(13) +#define PHY_AUTO_NEG_SYM_PAUSE BIT(10) +#define PHY_AUTO_NEG_100BT4 BIT(9) +#define PHY_AUTO_NEG_100BTX_FD BIT(8) +#define PHY_AUTO_NEG_100BTX BIT(7) +#define PHY_AUTO_NEG_10BT_FD BIT(6) +#define PHY_AUTO_NEG_10BT BIT(5) +#define PHY_AUTO_NEG_SELECTOR 0x001F +#define PHY_AUTO_NEG_802_3 0x0001 + +#define PHY_REG_REMOTE_CAPABILITY 5 + +#define PHY_REMOTE_NEXT_PAGE_NOT BIT(15) +#define PHY_REMOTE_ACKNOWLEDGE_NOT BIT(14) +#define PHY_REMOTE_REMOTE_FAULT_NOT BIT(13) +#define PHY_REMOTE_SYM_PAUSE BIT(10) +#define PHY_REMOTE_100BTX_FD BIT(8) +#define PHY_REMOTE_100BTX BIT(7) +#define PHY_REMOTE_10BT_FD BIT(6) +#define PHY_REMOTE_10BT BIT(5) +#endif + +#define KSZ8795_ID_HI 0x0022 +#define KSZ8795_ID_LO 0x1550 + +#define KSZ8795_SW_ID 0x8795 + +#define PHY_REG_LINK_MD 0x1D + +#define PHY_START_CABLE_DIAG BIT(15) +#define PHY_CABLE_DIAG_RESULT 0x6000 +#define PHY_CABLE_STAT_NORMAL 0x0000 +#define PHY_CABLE_STAT_OPEN 0x2000 +#define PHY_CABLE_STAT_SHORT 0x4000 +#define PHY_CABLE_STAT_FAILED 0x6000 +#define PHY_CABLE_10M_SHORT BIT(12) +#define PHY_CABLE_FAULT_COUNTER 0x01FF + +#define PHY_REG_PHY_CTRL 0x1F + +#define PHY_MODE_M 0x7 +#define PHY_MODE_S 8 +#define PHY_STAT_REVERSED_POLARITY BIT(5) +#define PHY_STAT_MDIX BIT(4) +#define PHY_FORCE_LINK BIT(3) +#define PHY_POWER_SAVING_ENABLE BIT(2) +#define PHY_REMOTE_LOOPBACK BIT(1) + +/* Chip resource */ + +#define PRIO_QUEUES 4 + +#define KS_PRIO_IN_REG 4 + +#define TOTAL_PORT_NUM 5 + +/* Host port can only be last of them. */ +#define SWITCH_PORT_NUM (TOTAL_PORT_NUM - 1) + +#define KSZ8795_COUNTER_NUM 0x20 +#define TOTAL_KSZ8795_COUNTER_NUM (KSZ8795_COUNTER_NUM + 4) + +#define SWITCH_COUNTER_NUM KSZ8795_COUNTER_NUM +#define TOTAL_SWITCH_COUNTER_NUM TOTAL_KSZ8795_COUNTER_NUM + +/* Common names used by other drivers */ + +#define P_BCAST_STORM_CTRL REG_PORT_CTRL_0 +#define P_PRIO_CTRL REG_PORT_CTRL_0 +#define P_TAG_CTRL REG_PORT_CTRL_0 +#define P_MIRROR_CTRL REG_PORT_CTRL_1 +#define P_802_1P_CTRL REG_PORT_CTRL_2 +#define P_STP_CTRL REG_PORT_CTRL_2 +#define P_LOCAL_CTRL REG_PORT_CTRL_7 +#define P_REMOTE_STATUS REG_PORT_STATUS_0 +#define P_FORCE_CTRL REG_PORT_CTRL_9 +#define P_NEG_RESTART_CTRL REG_PORT_CTRL_10 +#define P_SPEED_STATUS REG_PORT_STATUS_1 +#define P_LINK_STATUS REG_PORT_STATUS_2 +#define P_PASS_ALL_CTRL REG_PORT_CTRL_12 +#define P_INS_SRC_PVID_CTRL REG_PORT_CTRL_12 +#define P_DROP_TAG_CTRL REG_PORT_CTRL_13 +#define P_RATE_LIMIT_CTRL REG_PORT_RATE_LIMIT + +#define S_UNKNOWN_DA_CTRL REG_SWITCH_CTRL_12 +#define S_FORWARD_INVALID_VID_CTRL REG_FORWARD_INVALID_VID + +#define S_FLUSH_TABLE_CTRL REG_SW_CTRL_0 +#define S_LINK_AGING_CTRL REG_SW_CTRL_0 +#define S_HUGE_PACKET_CTRL REG_SW_CTRL_1 +#define S_MIRROR_CTRL REG_SW_CTRL_3 +#define S_REPLACE_VID_CTRL REG_SW_CTRL_4 +#define S_PASS_PAUSE_CTRL REG_SW_CTRL_10 +#define S_TAIL_TAG_CTRL REG_SW_CTRL_10 +#define S_802_1P_PRIO_CTRL REG_SW_CTRL_12 +#define S_TOS_PRIO_CTRL REG_TOS_PRIO_CTRL_0 +#define S_IPV6_MLD_CTRL REG_SW_CTRL_21 + +#define IND_ACC_TABLE(table) ((table) << 8) + +/* Driver set switch broadcast storm protection at 10% rate. */ +#define BROADCAST_STORM_PROT_RATE 10 + +/* 148,800 frames * 67 ms / 100 */ +#define BROADCAST_STORM_VALUE 9969 + +/** + * STATIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF + * STATIC_MAC_TABLE_FWD_PORTS 00-001F0000-00000000 + * STATIC_MAC_TABLE_VALID 00-00200000-00000000 + * STATIC_MAC_TABLE_OVERRIDE 00-00400000-00000000 + * STATIC_MAC_TABLE_USE_FID 00-00800000-00000000 + * STATIC_MAC_TABLE_FID 00-7F000000-00000000 + */ + +#define STATIC_MAC_TABLE_ADDR 0x0000FFFF +#define STATIC_MAC_TABLE_FWD_PORTS 0x001F0000 +#define STATIC_MAC_TABLE_VALID 0x00200000 +#define STATIC_MAC_TABLE_OVERRIDE 0x00400000 +#define STATIC_MAC_TABLE_USE_FID 0x00800000 +#define STATIC_MAC_TABLE_FID 0x7F000000 + +#define STATIC_MAC_FWD_PORTS_S 16 +#define STATIC_MAC_FID_S 24 + +/** + * VLAN_TABLE_FID 00-007F007F-007F007F + * VLAN_TABLE_MEMBERSHIP 00-0F800F80-0F800F80 + * VLAN_TABLE_VALID 00-10001000-10001000 + */ + +#define VLAN_TABLE_FID 0x007F +#define VLAN_TABLE_MEMBERSHIP 0x0F80 +#define VLAN_TABLE_VALID 0x1000 + +#define VLAN_TABLE_MEMBERSHIP_S 7 +#define VLAN_TABLE_S 16 + +/** + * DYNAMIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF + * DYNAMIC_MAC_TABLE_FID 00-007F0000-00000000 + * DYNAMIC_MAC_TABLE_NOT_READY 00-00800000-00000000 + * DYNAMIC_MAC_TABLE_SRC_PORT 00-07000000-00000000 + * DYNAMIC_MAC_TABLE_TIMESTAMP 00-18000000-00000000 + * DYNAMIC_MAC_TABLE_ENTRIES 7F-E0000000-00000000 + * DYNAMIC_MAC_TABLE_MAC_EMPTY 80-00000000-00000000 + */ + +#define DYNAMIC_MAC_TABLE_ADDR 0x0000FFFF +#define DYNAMIC_MAC_TABLE_FID 0x007F0000 +#define DYNAMIC_MAC_TABLE_SRC_PORT 0x07000000 +#define DYNAMIC_MAC_TABLE_TIMESTAMP 0x18000000 +#define DYNAMIC_MAC_TABLE_ENTRIES 0xE0000000 + +#define DYNAMIC_MAC_TABLE_NOT_READY 0x80 + +#define DYNAMIC_MAC_TABLE_ENTRIES_H 0x7F +#define DYNAMIC_MAC_TABLE_MAC_EMPTY 0x80 + +#define DYNAMIC_MAC_FID_S 16 +#define DYNAMIC_MAC_SRC_PORT_S 24 +#define DYNAMIC_MAC_TIMESTAMP_S 27 +#define DYNAMIC_MAC_ENTRIES_S 29 +#define DYNAMIC_MAC_ENTRIES_H_S 3 + +/** + * MIB_COUNTER_VALUE 00-00000000-3FFFFFFF + * MIB_TOTAL_BYTES 00-0000000F-FFFFFFFF + * MIB_PACKET_DROPPED 00-00000000-0000FFFF + * MIB_COUNTER_VALID 00-00000020-00000000 + * MIB_COUNTER_OVERFLOW 00-00000040-00000000 + */ + +#define MIB_COUNTER_OVERFLOW BIT(6) +#define MIB_COUNTER_VALID BIT(5) + +#define MIB_COUNTER_VALUE 0x3FFFFFFF + +#define KS_MIB_TOTAL_RX_0 0x100 +#define KS_MIB_TOTAL_TX_0 0x101 +#define KS_MIB_PACKET_DROPPED_RX_0 0x102 +#define KS_MIB_PACKET_DROPPED_TX_0 0x103 +#define KS_MIB_TOTAL_RX_1 0x104 +#define KS_MIB_TOTAL_TX_1 0x105 +#define KS_MIB_PACKET_DROPPED_TX_1 0x106 +#define KS_MIB_PACKET_DROPPED_RX_1 0x107 +#define KS_MIB_TOTAL_RX_2 0x108 +#define KS_MIB_TOTAL_TX_2 0x109 +#define KS_MIB_PACKET_DROPPED_TX_2 0x10A +#define KS_MIB_PACKET_DROPPED_RX_2 0x10B +#define KS_MIB_TOTAL_RX_3 0x10C +#define KS_MIB_TOTAL_TX_3 0x10D +#define KS_MIB_PACKET_DROPPED_TX_3 0x10E +#define KS_MIB_PACKET_DROPPED_RX_3 0x10F +#define KS_MIB_TOTAL_RX_4 0x110 +#define KS_MIB_TOTAL_TX_4 0x111 +#define KS_MIB_PACKET_DROPPED_TX_4 0x112 +#define KS_MIB_PACKET_DROPPED_RX_4 0x113 + +#define MIB_PACKET_DROPPED 0x0000FFFF + +#define MIB_TOTAL_BYTES_H 0x0000000F + +#define TAIL_TAG_OVERRIDE BIT(6) +#define TAIL_TAG_LOOKUP BIT(7) + +#define VLAN_TABLE_ENTRIES (4096 / 4) +#define FID_ENTRIES 128 + +#endif diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c new file mode 100644 index 0000000..50aa0d2 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz8795_spi.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Microchip KSZ8795 series register access through SPI + * + * Copyright (C) 2017 Microchip Technology Inc. + * Tristram Ha + */ + +#include + +#include +#include +#include +#include +#include + +#include "ksz_priv.h" +#include "ksz_common.h" + +#define SPI_ADDR_SHIFT 12 +#define SPI_ADDR_ALIGN 3 +#define SPI_TURNAROUND_SHIFT 1 + +KSZ_REGMAP_TABLE(ksz8795, 16, SPI_ADDR_SHIFT, + SPI_TURNAROUND_SHIFT, SPI_ADDR_ALIGN); + +static int ksz8795_spi_probe(struct spi_device *spi) +{ + struct ksz_device *dev; + int i, ret; + + dev = ksz_switch_alloc(&spi->dev, spi); + if (!dev) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(ksz8795_regmap_config); i++) { + dev->regmap[i] = devm_regmap_init_spi(spi, + &ksz8795_regmap_config + [i]); + if (IS_ERR(dev->regmap[i])) { + ret = PTR_ERR(dev->regmap[i]); + dev_err(&spi->dev, + "Failed to initialize regmap%i: %d\n", + ksz8795_regmap_config[i].val_bits, ret); + return ret; + } + } + + if (spi->dev.platform_data) + dev->pdata = spi->dev.platform_data; + + ret = ksz8795_switch_register(dev); + + /* Main DSA driver may not be started yet. */ + if (ret) + return ret; + + spi_set_drvdata(spi, dev); + + return 0; +} + +static int ksz8795_spi_remove(struct spi_device *spi) +{ + struct ksz_device *dev = spi_get_drvdata(spi); + + if (dev) + ksz_switch_remove(dev); + + return 0; +} + +static void ksz8795_spi_shutdown(struct spi_device *spi) +{ + struct ksz_device *dev = spi_get_drvdata(spi); + + if (dev && dev->dev_ops->shutdown) + dev->dev_ops->shutdown(dev); +} + +static const struct of_device_id ksz8795_dt_ids[] = { + { .compatible = "microchip,ksz8765" }, + { .compatible = "microchip,ksz8794" }, + { .compatible = "microchip,ksz8795" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ksz8795_dt_ids); + +static struct spi_driver ksz8795_spi_driver = { + .driver = { + .name = "ksz8795-switch", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ksz8795_dt_ids), + }, + .probe = ksz8795_spi_probe, + .remove = ksz8795_spi_remove, + .shutdown = ksz8795_spi_shutdown, +}; + +module_spi_driver(ksz8795_spi_driver); + +MODULE_AUTHOR("Tristram Ha "); +MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index a3d2d67..ce20cc9 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -373,7 +373,8 @@ int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) /* setup slave port */ dev->dev_ops->port_setup(dev, port, false); - dev->dev_ops->phy_setup(dev, port, phy); + if (dev->dev_ops->phy_setup) + dev->dev_ops->phy_setup(dev, port, phy); /* port_stp_state_set() will be called after to enable the port so * there is no need to do anything. diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index ee7096d..84fed4a 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -68,6 +68,22 @@ static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val) return ret; } +static inline int ksz_read64(struct ksz_device *dev, u32 reg, u64 *val) +{ + u32 value[2]; + int ret; + + ret = regmap_bulk_read(dev->regmap[2], reg, value, 2); + if (!ret) { + /* Ick! ToDo: Add 64bit R/W to regmap on 32bit systems */ + value[0] = swab32(value[0]); + value[1] = swab32(value[1]); + *val = swab64((u64)*value); + } + + return ret; +} + static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value) { return regmap_write(dev->regmap[0], reg, value); @@ -83,6 +99,18 @@ static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value) return regmap_write(dev->regmap[2], reg, value); } +static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value) +{ + u32 val[2]; + + /* Ick! ToDo: Add 64bit R/W to regmap on 32bit systems */ + value = swab64(value); + val[0] = swab32(value & 0xffffffffULL); + val[1] = swab32(value >> 32ULL); + + return regmap_bulk_write(dev->regmap[2], reg, val, 2); +} + static inline void ksz_pread8(struct ksz_device *dev, int port, int offset, u8 *data) { diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h index beacf0e..44c16aa 100644 --- a/drivers/net/dsa/microchip/ksz_priv.h +++ b/drivers/net/dsa/microchip/ksz_priv.h @@ -150,6 +150,7 @@ int ksz_switch_register(struct ksz_device *dev, const struct ksz_dev_ops *ops); void ksz_switch_remove(struct ksz_device *dev); +int ksz8795_switch_register(struct ksz_device *dev); int ksz9477_switch_register(struct ksz_device *dev); #endif -- 2.7.4