From e626fcb6e28b19544b6aed5bf6f0fe3014abe719 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Thu, 4 Apr 2019 12:26:50 +0200 Subject: [PATCH] DTS: Enable USB host support (including regulators) on HSC|DDC boards This commit enables the support for K&P's HSC|DDC imx53 based boards. It was also necessary to provide device tree description for regulators to avoid board specific code definition. The GPIO pin description responsible for VBUS control has been moved from "hog" group to usbh1 dedicated one. Signed-off-by: Lukasz Majewski --- arch/arm/dts/imx53-kp.dts | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/imx53-kp.dts b/arch/arm/dts/imx53-kp.dts index a576373..5f9e4fa 100644 --- a/arch/arm/dts/imx53-kp.dts +++ b/arch/arm/dts/imx53-kp.dts @@ -21,6 +21,22 @@ aliases { mmc0 = &esdhc3; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + }; &esdhc3 { @@ -109,8 +125,6 @@ fsl,pins = < /* PHY RESET */ MX53_PAD_PATA_DA_0__GPIO7_6 0x182 - /* VBUS_PWR_EN */ - MX53_PAD_PATA_DA_2__GPIO7_8 0x1e4 /* BOOSTER_OFF */ MX53_PAD_EIM_CS0__GPIO2_23 0x1e4 /* LCD BACKLIGHT */ @@ -156,6 +170,13 @@ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* VBUS_PWR_EN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x1e4 + >; + }; }; }; @@ -164,3 +185,10 @@ pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; -- 2.7.4