From e5deb8f76e64d94ccef715e75ebafffd0c312d80 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 7 Sep 2023 08:53:28 +0300 Subject: [PATCH] bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE is used to force idle target modules rather than block idle during usage. The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when a target module is active, and configure autoidle and wake-up when a target module is inactive. We are missing configuring the target module on sysc_disable_module(), and missing toggling of the wake-up bit. Let's fix the issue to allow uart wake-up to work. Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks") Tested-by: Dhruva Gole Tested-by: Kevin Hilman Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 33e8d78..d57bc06 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1098,6 +1098,11 @@ static int sysc_enable_module(struct device *dev) if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_SIDLE_ACT)) { best_mode = SYSC_IDLE_NO; + + /* Clear WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg &= ~BIT(regbits->enwkup_shift); } else { best_mode = fls(ddata->cfg.sidlemodes) - 1; if (best_mode > SYSC_IDLE_MASK) { @@ -1225,6 +1230,13 @@ set_sidle: } } + if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) { + /* Set WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg |= BIT(regbits->enwkup_shift); + } + reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift); reg |= best_mode << regbits->sidle_shift; if (regbits->autoidle_shift >= 0 && @@ -1519,16 +1531,16 @@ struct sysc_revision_quirk { static const struct sysc_revision_quirk sysc_revision_quirks[] = { /* These drivers need to be fixed to not use pm_runtime_irq_safe() */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Quirks that need to be set based on the module address */ SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff, -- 2.7.4