From e5c5c8d23fef2a976afe724f30e34da31be09769 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Fri, 17 Feb 2017 11:29:46 +0100 Subject: [PATCH] soc/fsl/qe: only apply QE_General4 workaround on affected SoCs The QE_General4 workaround is only valid for the MPC832x and MPC836x SoCs. The other SoCs that embed a QUICC engine are not affected by this hardware bug and thus can use the computed divisors (this was successfully tested on the T1040). Similalry to what was done in commit 8ce795cb0c6b ("i2c: mpc: assign the correct prescaler from SVR") in order to avoid changes in the device tree nodes of the QE (with maybe a variant of the compatible property), the PVR reg is read out to find out if the workaround must be applied or not. Signed-off-by: Valentin Longchamp Signed-off-by: Scott Wood --- drivers/soc/fsl/qe/qe.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c index 31a0945..2ef6fc6 100644 --- a/drivers/soc/fsl/qe/qe.c +++ b/drivers/soc/fsl/qe/qe.c @@ -200,6 +200,9 @@ unsigned int qe_get_brg_clk(void) } EXPORT_SYMBOL(qe_get_brg_clk); +#define PVR_VER_836x 0x8083 +#define PVR_VER_832x 0x8084 + /* Program the BRG to the given sampling rate and multiplier * * @brg: the BRG, QE_BRG1 - QE_BRG16 @@ -226,8 +229,9 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says that the BRG divisor must be even if you're not using divide-by-16 mode. */ - if (!div16 && (divisor & 1) && (divisor > 3)) - divisor++; + if (pvr_version_is(PVR_VER_836x) || pvr_version_is(PVR_VER_832x)) + if (!div16 && (divisor & 1) && (divisor > 3)) + divisor++; tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE | div16; -- 2.7.4