From e4423781850025726b6c4e24ba3d93c7ff9cd826 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 26 Jun 2006 00:26:27 -0700 Subject: [PATCH] [PATCH] backlight: LOCOMO Backlight Driver updates Add backlight intensity control to the LOCOMO lcd/backlight driver using the backlight class and add basic power management support. This is a reimplementation and improvement of patches by John Lenz and Pavel Machek Signed-off-by: Richard Purdie Signed-off-by: Antonino Daplas Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/common/locomo.c | 45 +++++----- drivers/video/backlight/Kconfig | 8 ++ drivers/video/backlight/Makefile | 2 +- drivers/video/backlight/locomolcd.c | 123 ++++++++++++++++++++++++---- include/asm-arm/hardware/locomo.h | 5 ++ 5 files changed, 146 insertions(+), 37 deletions(-) diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index a7dc1370695..0dafba3a701 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -629,21 +629,6 @@ static int locomo_resume(struct platform_device *dev) #endif -#define LCM_ALC_EN 0x8000 - -void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf) -{ - unsigned long flags; - - spin_lock_irqsave(&lchip->lock, flags); - locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); - udelay(100); - locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); - locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); - spin_unlock_irqrestore(&lchip->lock, flags); -} - - /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -698,14 +683,10 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) , lchip->base + LOCOMO_GPD); locomo_writel(0, lchip->base + LOCOMO_GIE); - /* FrontLight */ + /* Frontlight */ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); - /* Same constants can be used for collie and poodle - (depending on CONFIG options in original sharp code)? */ - frontlight_set(lchip, 163, 0, 148); - /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ @@ -1062,6 +1043,30 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int spin_unlock_irqrestore(&lchip->lock, flags); } +/* + * Frontlight control + */ + +static struct locomo *locomo_chip_driver(struct locomo_dev *ldev); + +void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) +{ + unsigned long flags; + struct locomo *lchip = locomo_chip_driver(dev); + + if (vr) + locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 1); + else + locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 0); + + spin_lock_irqsave(&lchip->lock, flags); + locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + udelay(100); + locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + spin_unlock_irqrestore(&lchip->lock, flags); +} + /* * LoCoMo "Register Access Bus." * diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index b895eaaa73f..02f15297a02 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -50,6 +50,14 @@ config BACKLIGHT_CORGI If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the backlight driver. +config BACKLIGHT_LOCOMO + tristate "Sharp LOCOMO LCD/Backlight Driver" + depends on BACKLIGHT_DEVICE && SHARP_LOCOMO + default y + help + If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to + enable the LCD/backlight driver. + config BACKLIGHT_HP680 tristate "HP Jornada 680 Backlight Driver" depends on BACKLIGHT_DEVICE && SH_HP6XX diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 744210c38e7..65e5553fc84 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o -obj-$(CONFIG_SHARP_LOCOMO) += locomolcd.o +obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 60831bb2368..bd879b7ec11 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -17,6 +17,8 @@ #include #include #include +#include +#include #include #include @@ -25,7 +27,10 @@ #include "../../../arch/arm/mach-sa1100/generic.h" +static struct backlight_device *locomolcd_bl_device; static struct locomo_dev *locomolcd_dev; +static unsigned long locomolcd_flags; +#define LOCOMOLCD_SUSPENDED 0x01 static void locomolcd_on(int comadj) { @@ -89,12 +94,10 @@ void locomolcd_power(int on) } /* read comadj */ - if (comadj == -1) { - if (machine_is_poodle()) - comadj = 118; - if (machine_is_collie()) - comadj = 128; - } + if (comadj == -1 && machine_is_collie()) + comadj = 128; + if (comadj == -1 && machine_is_poodle()) + comadj = 118; if (on) locomolcd_on(comadj); @@ -105,26 +108,100 @@ void locomolcd_power(int on) } EXPORT_SYMBOL(locomolcd_power); -static int poodle_lcd_probe(struct locomo_dev *dev) + +static int current_intensity; + +static int locomolcd_set_intensity(struct backlight_device *bd) +{ + int intensity = bd->props->brightness; + + if (bd->props->power != FB_BLANK_UNBLANK) + intensity = 0; + if (bd->props->fb_blank != FB_BLANK_UNBLANK) + intensity = 0; + if (locomolcd_flags & LOCOMOLCD_SUSPENDED) + intensity = 0; + + switch (intensity) { + /* AC and non-AC are handled differently, but produce same results in sharp code? */ + case 0: locomo_frontlight_set(locomolcd_dev, 0, 0, 161); break; + case 1: locomo_frontlight_set(locomolcd_dev, 117, 0, 161); break; + case 2: locomo_frontlight_set(locomolcd_dev, 163, 0, 148); break; + case 3: locomo_frontlight_set(locomolcd_dev, 194, 0, 161); break; + case 4: locomo_frontlight_set(locomolcd_dev, 194, 1, 161); break; + + default: + return -ENODEV; + } + current_intensity = intensity; + return 0; +} + +static int locomolcd_get_intensity(struct backlight_device *bd) +{ + return current_intensity; +} + +static struct backlight_properties locomobl_data = { + .owner = THIS_MODULE, + .get_brightness = locomolcd_get_intensity, + .update_status = locomolcd_set_intensity, + .max_brightness = 4, +}; + +#ifdef CONFIG_PM +static int locomolcd_suspend(struct locomo_dev *dev, pm_message_t state) +{ + locomolcd_flags |= LOCOMOLCD_SUSPENDED; + locomolcd_set_intensity(locomolcd_bl_device); + return 0; +} + +static int locomolcd_resume(struct locomo_dev *dev) +{ + locomolcd_flags &= ~LOCOMOLCD_SUSPENDED; + locomolcd_set_intensity(locomolcd_bl_device); + return 0; +} +#else +#define locomolcd_suspend NULL +#define locomolcd_resume NULL +#endif + +static int locomolcd_probe(struct locomo_dev *dev) { unsigned long flags; local_irq_save(flags); locomolcd_dev = dev; + locomo_gpio_set_dir(dev, LOCOMO_GPIO_FL_VR, 0); + /* the poodle_lcd_power function is called for the first time * from fs_initcall, which is before locomo is activated. * We need to recall poodle_lcd_power here*/ -#ifdef CONFIG_MACH_POODLE - locomolcd_power(1); -#endif + if (machine_is_poodle()) + locomolcd_power(1); + local_irq_restore(flags); + + locomolcd_bl_device = backlight_device_register("locomo-bl", NULL, &locomobl_data); + + if (IS_ERR (locomolcd_bl_device)) + return PTR_ERR (locomolcd_bl_device); + + /* Set up frontlight so that screen is readable */ + locomobl_data.brightness = 2; + locomolcd_set_intensity(locomolcd_bl_device); + return 0; } -static int poodle_lcd_remove(struct locomo_dev *dev) +static int locomolcd_remove(struct locomo_dev *dev) { unsigned long flags; + + backlight_device_unregister(locomolcd_bl_device); local_irq_save(flags); locomolcd_dev = NULL; local_irq_restore(flags); @@ -136,19 +213,33 @@ static struct locomo_driver poodle_lcd_driver = { .name = "locomo-backlight", }, .devid = LOCOMO_DEVID_BACKLIGHT, - .probe = poodle_lcd_probe, - .remove = poodle_lcd_remove, + .probe = locomolcd_probe, + .remove = locomolcd_remove, + .suspend = locomolcd_suspend, + .resume = locomolcd_resume, }; -static int __init poodle_lcd_init(void) + +static int __init locomolcd_init(void) { int ret = locomo_driver_register(&poodle_lcd_driver); - if (ret) return ret; + if (ret) + return ret; #ifdef CONFIG_SA1100_COLLIE sa1100fb_lcd_power = locomolcd_power; #endif return 0; } -device_initcall(poodle_lcd_init); +static void __exit locomolcd_exit(void) +{ + locomo_driver_unregister(&poodle_lcd_driver); +} + +module_init(locomolcd_init); +module_exit(locomolcd_exit); + +MODULE_AUTHOR("John Lenz , Pavel Machek "); +MODULE_DESCRIPTION("Collie LCD driver"); +MODULE_LICENSE("GPL"); diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h index 5f10048ec54..22dfb173776 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/include/asm-arm/hardware/locomo.h @@ -111,6 +111,8 @@ #define LOCOMO_ALS 0x00 /* Adjust light cycle */ #define LOCOMO_ALD 0x04 /* Adjust light duty */ +#define LOCOMO_ALC_EN 0x8000 + /* Backlight controller: TFT signal */ #define LOCOMO_BACKLIGHT 0x38 #define LOCOMO_TC 0x00 /* TFT control signal */ @@ -203,4 +205,7 @@ void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int /* M62332 control function */ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); +/* Frontlight control */ +void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); + #endif -- 2.34.1