From e41f0bfcb130d9f17cf5ee8e46d739c1bebda963 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Fri, 18 Sep 2009 15:08:20 +0530 Subject: [PATCH] ath9k: Fix bugs in handling TX power * Get power table offset from the EEPROM instead of using a hardcoded value of -5 if the EEPROM rev is >= 21. * Add support in the 4k eeprom code for tx power offset in case we have a 4k AR9280 implementation. * Fix tx power accuracy at high powers. Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom.h | 5 +- drivers/net/wireless/ath/ath9k/eeprom_4k.c | 4 +- drivers/net/wireless/ath/ath9k/eeprom_def.c | 102 ++++++++++++++++++++++++++-- 3 files changed, 104 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 3349274..2f2993b 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -134,6 +134,7 @@ #define AR5416_EEP_MINOR_VER_17 0x11 #define AR5416_EEP_MINOR_VER_19 0x13 #define AR5416_EEP_MINOR_VER_20 0x14 +#define AR5416_EEP_MINOR_VER_21 0x15 #define AR5416_EEP_MINOR_VER_22 0x16 #define AR5416_NUM_5G_CAL_PIERS 8 @@ -154,7 +155,7 @@ #define AR5416_BCHAN_UNUSED 0xFF #define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64 #define AR5416_MAX_CHAINS 3 -#define AR5416_PWR_TABLE_OFFSET -5 +#define AR5416_PWR_TABLE_OFFSET_DB -5 /* Rx gain type values */ #define AR5416_EEP_RXGAIN_23DB_BACKOFF 0 @@ -302,7 +303,7 @@ struct base_eep_header { u8 txGainType; u8 rcChainMask; u8 desiredScaleCCK; - u8 power_table_offset; + u8 pwr_table_offset; u8 frac_n_5g; u8 futureBase_3[21]; } __packed; diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c index 2a27b1d..58167d8 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c @@ -210,6 +210,8 @@ static u32 ath9k_hw_4k_get_eeprom(struct ath_hw *ah, return pBase->rxMask; case EEP_FRAC_N_5G: return 0; + case EEP_PWR_TABLE_OFFSET: + return AR5416_PWR_TABLE_OFFSET_DB; default: return 0; } @@ -753,7 +755,7 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah, if (AR_SREV_9280_10_OR_LATER(ah)) { for (i = 0; i < Ar5416RateSize; i++) - ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2; + ratesArray[i] -= AR5416_PWR_TABLE_OFFSET_DB * 2; } /* OFDM power per rate */ diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index 8f04b64..404a034 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -291,6 +291,11 @@ static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah, return pBase->frac_n_5g; else return 0; + case EEP_PWR_TABLE_OFFSET: + if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_21) + return pBase->pwr_table_offset; + else + return AR5416_PWR_TABLE_OFFSET_DB; default: return 0; } @@ -741,6 +746,76 @@ static void ath9k_hw_get_def_gain_boundaries_pdadcs(struct ath_hw *ah, return; } +static int16_t ath9k_change_gain_boundary_setting(struct ath_hw *ah, + u16 *gb, + u16 numXpdGain, + u16 pdGainOverlap_t2, + int8_t pwr_table_offset, + int16_t *diff) + +{ + u16 k; + + /* Prior to writing the boundaries or the pdadc vs. power table + * into the chip registers the default starting point on the pdadc + * vs. power table needs to be checked and the curve boundaries + * adjusted accordingly + */ + if (AR_SREV_9280_20_OR_LATER(ah)) { + u16 gb_limit; + + if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) { + /* get the difference in dB */ + *diff = (u16)(pwr_table_offset - AR5416_PWR_TABLE_OFFSET_DB); + /* get the number of half dB steps */ + *diff *= 2; + /* change the original gain boundary settings + * by the number of half dB steps + */ + for (k = 0; k < numXpdGain; k++) + gb[k] = (u16)(gb[k] - *diff); + } + /* Because of a hardware limitation, ensure the gain boundary + * is not larger than (63 - overlap) + */ + gb_limit = (u16)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2); + + for (k = 0; k < numXpdGain; k++) + gb[k] = (u16)min(gb_limit, gb[k]); + } + + return *diff; +} + +static void ath9k_adjust_pdadc_values(struct ath_hw *ah, + int8_t pwr_table_offset, + int16_t diff, + u8 *pdadcValues) +{ +#define NUM_PDADC(diff) (AR5416_NUM_PDADC_VALUES - diff) + u16 k; + + /* If this is a board that has a pwrTableOffset that differs from + * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the + * pdadc vs pwr table needs to be adjusted prior to writing to the + * chip. + */ + if (AR_SREV_9280_20_OR_LATER(ah)) { + if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) { + /* shift the table to start at the new offset */ + for (k = 0; k < (u16)NUM_PDADC(diff); k++ ) { + pdadcValues[k] = pdadcValues[k + diff]; + } + + /* fill the back of the table */ + for (k = (u16)NUM_PDADC(diff); k < NUM_PDADC(0); k++) { + pdadcValues[k] = pdadcValues[NUM_PDADC(diff)]; + } + } + } +#undef NUM_PDADC +} + static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah, struct ath9k_channel *chan, int16_t *pTxPowerIndexOffset) @@ -756,15 +831,18 @@ static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah, static u8 pdadcValues[AR5416_NUM_PDADC_VALUES]; u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK]; u16 numPiers, i, j; - int16_t tMinCalPower; + int16_t tMinCalPower, diff = 0; u16 numXpdGain, xpdMask; u16 xpdGainValues[AR5416_NUM_PD_GAINS] = { 0, 0, 0, 0 }; u32 reg32, regOffset, regChainOffset; int16_t modalIdx; + int8_t pwr_table_offset; modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0; xpdMask = pEepData->modalHeader[modalIdx].xpdGain; + pwr_table_offset = ah->eep_ops->get_eeprom(ah, EEP_PWR_TABLE_OFFSET); + if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >= AR5416_EEP_MINOR_VER_2) { pdGainOverlap_t2 = @@ -844,6 +922,13 @@ static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah, numXpdGain); } + diff = ath9k_change_gain_boundary_setting(ah, + gainBoundaries, + numXpdGain, + pdGainOverlap_t2, + pwr_table_offset, + &diff); + if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) { if (OLC_FOR_AR9280_20_LATER) { REG_WRITE(ah, @@ -864,6 +949,10 @@ static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah, } } + + ath9k_adjust_pdadc_values(ah, pwr_table_offset, + diff, pdadcValues); + regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset; for (j = 0; j < 32; j++) { reg32 = ((pdadcValues[4 * j + 0] & 0xFF) << 0) | @@ -1199,8 +1288,13 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah, } if (AR_SREV_9280_10_OR_LATER(ah)) { - for (i = 0; i < Ar5416RateSize; i++) - ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2; + for (i = 0; i < Ar5416RateSize; i++) { + int8_t pwr_table_offset; + + pwr_table_offset = ah->eep_ops->get_eeprom(ah, + EEP_PWR_TABLE_OFFSET); + ratesArray[i] -= pwr_table_offset * 2; + } } REG_WRITE(ah, AR_PHY_POWER_TX_RATE1, @@ -1299,7 +1393,7 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah, if (AR_SREV_9280_10_OR_LATER(ah)) regulatory->max_power_level = - ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2; + ratesArray[i] + AR5416_PWR_TABLE_OFFSET_DB * 2; else regulatory->max_power_level = ratesArray[i]; -- 2.7.4