From e41337a1383fed062e1f40789a60cebadde390b6 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 27 Jun 2008 12:56:10 -0700 Subject: [PATCH] gPXE: [a20] Send a null command to the KBC after changing A20 Send a null command, specifically "pulse outputs" with no outputs selected, to the KBC after changing A20. This was apparently done by DOS, presumably as a synchronization hack, and the authors of the UHCI spec thought it was inherent. Therefore, there are systems out there (e.g. HP DL360 G5) which will stop responsing to "legacy USB" unless they see the null command, 0xFF, written to port 0x64 at the end of the A20 toggling sequence. Signed-off-by: H. Peter Anvin --- gpxe/src/arch/i386/firmware/pcbios/gateA20.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/gpxe/src/arch/i386/firmware/pcbios/gateA20.c b/gpxe/src/arch/i386/firmware/pcbios/gateA20.c index 2caac89..a14e341 100644 --- a/gpxe/src/arch/i386/firmware/pcbios/gateA20.c +++ b/gpxe/src/arch/i386/firmware/pcbios/gateA20.c @@ -12,6 +12,7 @@ #define KC_CMD_WIN 0xd0 /* read output port */ #define KC_CMD_WOUT 0xd1 /* write output port */ +#define KC_CMD_NULL 0xff /* null command ("pulse nothing") */ #define KB_SET_A20 0xdf /* enable A20, enable output buffer full interrupt enable data line @@ -130,6 +131,8 @@ void gateA20_set ( void ) { empty_8042(); outb ( KB_SET_A20, K_RDWR ); empty_8042(); + outb ( KC_CMD_NULL, K_CMD ); + empty_8042(); if ( gateA20_is_set ( A20_KBC_RETRIES ) ) { DBG ( "Enabled gate A20 using " "keyboard controller\n" ); -- 2.7.4