From e308cb835c56e7a8b93664797925549a42df8e68 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 20 Jan 2016 19:27:25 +0800 Subject: [PATCH] net: mvneta: update clocks property and document additional clock-names Signed-off-by: Jisheng Zhang Acked-by: Rob Herring Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index aeea50c..d0cb8693 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -6,12 +6,17 @@ Required properties: - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory -- clocks: a pointer to the reference clock for this device. +- clocks: List of clocks for this device. At least one clock is + mandatory for the core clock. If several clocks are given, then the + clock-names property must be used to identify them. Optional properties: - tx-csum-limit: maximum mtu supported by port that allow TX checksum. Value is presented in bytes. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for others. +- clock-names: List of names corresponding to clocks property; shall be + "core" for core clock and "bus" for the optional bus clock. + Example: -- 2.7.4