From e22ea7cc8db19b7765901c13e81b890baf3405da Mon Sep 17 00:00:00 2001 From: Richard Foley Date: Fri, 23 Apr 2004 08:33:34 +0200 Subject: [PATCH] unfork the debugger (patch for 5.9.x) Message-Id: <200404230633.34402.richard.foley@rfi.net> p4raw-id: //depot/perl@22739 --- lib/perl5db.pl | 4863 +++++++++++++++++++++++++++++--------------------------- 1 file changed, 2556 insertions(+), 2307 deletions(-) diff --git a/lib/perl5db.pl b/lib/perl5db.pl index 312e5ff..2735a1d 100644 --- a/lib/perl5db.pl +++ b/lib/perl5db.pl @@ -1,3 +1,4 @@ + =head1 NAME C - the perl debugger @@ -492,9 +493,9 @@ package DB; use IO::Handle; # Debugger for Perl 5.00x; perl5db.pl patch level: -$VERSION = 1.25; +$VERSION = 1.26; -$header = "perl5db.pl version $VERSION"; +$header = "perl5db.pl version $VERSION"; =head1 DEBUGGER ROUTINES @@ -596,27 +597,27 @@ context, so we can use C freely. sub eval { # 'my' would make it visible from user code - # but so does local! --tchrist + # but so does local! --tchrist # Remember: this localizes @DB::res, not @main::res. local @res; { - # Try to keep the user code from messing with us. Save these so that - # even if the eval'ed code changes them, we can put them back again. - # Needed because the user could refer directly to the debugger's + + # Try to keep the user code from messing with us. Save these so that + # even if the eval'ed code changes them, we can put them back again. + # Needed because the user could refer directly to the debugger's # package globals (and any 'my' variables in this containing scope) # inside the eval(), and we want to try to stay safe. - local $otrace = $trace; + local $otrace = $trace; local $osingle = $single; local $od = $^D; # Untaint the incoming eval() argument. { ($evalarg) = $evalarg =~ /(.*)/s; } - # $usercontext built in DB::DB near the comment + # $usercontext built in DB::DB near the comment # "set up the context for DB::eval ..." # Evaluate and save any results. - @res = - eval "$usercontext $evalarg;\n"; # '\n' for nice recursive debug + @res = eval "$usercontext $evalarg;\n"; # '\n' for nice recursive debug # Restore those old values. $trace = $otrace; @@ -630,7 +631,7 @@ sub eval { # Since we're only saving $@, we only have to localize the array element # that it will be stored in. - local $saved[0]; # Preserve the old value of $@ + local $saved[0]; # Preserve the old value of $@ eval { &DB::save }; # Now see whether we need to report an error back to the user. @@ -642,32 +643,32 @@ sub eval { # Display as required by the caller. $onetimeDump and $onetimedumpDepth # are package globals. elsif ($onetimeDump) { - if ($onetimeDump eq 'dump') { - local $option{dumpDepth} = $onetimedumpDepth - if defined $onetimedumpDepth; - dumpit($OUT, \@res); - } - elsif ($onetimeDump eq 'methods') { - methods($res[0]); - } + if ( $onetimeDump eq 'dump' ) { + local $option{dumpDepth} = $onetimedumpDepth + if defined $onetimedumpDepth; + dumpit( $OUT, \@res ); + } + elsif ( $onetimeDump eq 'methods' ) { + methods( $res[0] ); + } } ## end elsif ($onetimeDump) @res; } ## end sub eval ############################################## End lexical danger zone -# After this point it is safe to introduce lexicals -# The code being debugged will be executing in its own context, and +# After this point it is safe to introduce lexicals. +# The code being debugged will be executing in its own context, and # can't see the inside of the debugger. # -# However, one should not overdo it: leave as much control from outside as +# However, one should not overdo it: leave as much control from outside as # possible. If you make something a lexical, it's not going to be addressable # from outside the debugger even if you know its name. # This file is automatically included if you do perl -d. # It's probably not useful to include this yourself. # -# Before venturing further into these twisty passages, it is +# Before venturing further into these twisty passages, it is # wise to read the perldebguts man page or risk the ire of dragons. # # (It should be noted that perldebguts will tell you a lot about @@ -708,7 +709,7 @@ sub eval { # Changes: 0.95 # + `v' command shows versions. # -# Changes: 0.96 +# Changes: 0.96 # + `v' command shows version of readline. # primitive completion works (dynamic variables, subs for `b' and `l', # options). Can `p %var' @@ -725,7 +726,7 @@ sub eval { # + `b postpone subr' implemented. # + now only `q' exits debugger (overwritable on $inhibit_exit). # + When restarting debugger breakpoints/actions persist. -# + Buglet: When restarting debugger only one breakpoint/action per +# + Buglet: When restarting debugger only one breakpoint/action per # autoloaded function persists. # # Changes: 0.97: NonStop will not stop in at_exit(). @@ -758,12 +759,12 @@ sub eval { # They are not used in print_help if they will hurt. Strip pod # if we're paging to less. # + Fixed mis-formatting of help messages caused by ornaments -# to restore Larry's original formatting. -# + Fixed many other formatting errors. The code is still suboptimal, +# to restore Larry's original formatting. +# + Fixed many other formatting errors. The code is still suboptimal, # and needs a lot of work at restructuring. It's also misindented # in many places. # + Fixed bug where trying to look at an option like your pager -# shows "1". +# shows "1". # + Fixed some $? processing. Note: if you use csh or tcsh, you will # lose. You should consider shell escapes not using their shell, # or else not caring about detailed status. This should really be @@ -806,7 +807,7 @@ sub eval { # unconditionally, or if started as a kid of another debugger session; # + New `O'ption CreateTTY # I bits control attempts to create a new TTY on events: -# 1: on fork() +# 1: on fork() # 2: debugger is started inside debugger # 4: on startup # + Code to auto-create a new TTY window on OS/2 (currently one @@ -834,11 +835,11 @@ sub eval { # breakable_line_in_filename($name, $from [, $to]) # # First breakable line in the # # range $from .. $to. $to defaults -# # to $from, and may be less than +# # to $from, and may be less than # # $to # breakable_line($from [, $to]) # Same for the current file # break_on_filename_line($name, $lineno [, $cond]) -# # Set breakpoint,$cond defaults to +# # Set breakpoint,$cond defaults to # # 1 # break_on_filename_line_range($name, $from, $to [, $cond]) # # As above, on the first @@ -862,7 +863,7 @@ sub eval { # + Fixed warnings generated by "O" (Show debugger options) # + Fixed warnings generated by "p 42" (Print expression) # Changes: 1.13: Jun 19, 2001 Scott.L.Miller@compaq.com -# + Added windowSize option +# + Added windowSize option # Changes: 1.14: Oct 9, 2001 multiple # + Clean up after itself on VMS (Charles Lane in 12385) # + Adding "@ file" syntax (Peter Scott in 12014) @@ -877,12 +878,12 @@ sub eval { # + $onetimeDump improvements # Changes: 1.17: Feb 20, 2002 Richard Foley # Moved some code to cmd_[.]()'s for clarity and ease of handling, -# rationalised the following commands and added cmd_wrapper() to -# enable switching between old and frighteningly consistent new +# rationalised the following commands and added cmd_wrapper() to +# enable switching between old and frighteningly consistent new # behaviours for diehards: 'o CommandSet=pre580' (sigh...) # a(add), A(del) # action expr (added del by line) # + b(add), B(del) # break [line] (was b,D) -# + w(add), W(del) # watch expr (was W,W) +# + w(add), W(del) # watch expr (was W,W) # # added del by expr # + h(summary), h h(long) # help (hh) (was h h,h) # + m(methods), M(modules) # ... (was m,v) @@ -906,9 +907,13 @@ sub eval { # + Added command to save all debugger commands for sourcing later. # + Added command to display parent inheritence tree of given class. # + Fixed minor newline in history bug. -# Changes: 1.25 (again :) -# + unfork the 5.8.x and 5.9.x debuggers. -# + Richard Foley and Joe McMahon +# Changes: 1.25: Apr 17, 2004 Richard Foley +# + Fixed option bug (setting invalid options + not recognising valid short forms) +# Changes: 1.26: Apr 22, 2004 Richard Foley +# + unfork the 5.8.x and 5.9.x debuggers. +# + whitespace and assertions call cleanup across versions +# + H * deletes (resets) history +# + i now handles Class + blessed objects #################################################################### =head1 DEBUGGER INITIALIZATION @@ -930,18 +935,17 @@ terminates, and defaulting to printing return values for the C command. # compiliation. Probably it would be better practice to fix the warnings, # but this is how it's done at the moment. - -BEGIN { - $ini_warn = $^W; - $^W = 0; -} # Switch compilation warnings off until another BEGIN. +BEGIN { + $ini_warn = $^W; + $^W = 0; +} # Switch compilation warnings off until another BEGIN. # test if assertions are supported and actived: BEGIN { - $ini_assertion= - eval "sub asserting_test : assertion {1}; 1"; + $ini_assertion = eval "sub asserting_test : assertion {1}; 1"; + # $ini_assertion = undef => assertions unsupported, - # " = 1 => assertions suported + # " = 1 => assertions supported # print "\$ini_assertion=$ini_assertion\n"; } @@ -952,7 +956,7 @@ local ($^W) = 0; # Switch run-time warnings off during init. # the principle of not fiddling with something that was working, this was # left alone. warn( # Do not ;-) - # These variables control the execution of 'dumpvar.pl'. + # These variables control the execution of 'dumpvar.pl'. $dumpvar::hashDepth, $dumpvar::arrayDepth, $dumpvar::dumpDBFiles, @@ -988,8 +992,8 @@ warn( # Do not ;-) # We set these variables to safe values. We don't want to blindly turn # off warnings, because other packages may still want them. -$trace = $signal = $single = 0; # Uninitialized warning suppression - # (local $^W cannot help - other packages!). +$trace = $signal = $single = 0; # Uninitialized warning suppression + # (local $^W cannot help - other packages!). # Default to not exiting when program finishes; print the return # value when the 'r' command is used to return from a subroutine. @@ -1009,21 +1013,21 @@ are to be accepted. =cut @options = qw( - CommandSet - hashDepth arrayDepth dumpDepth - DumpDBFiles DumpPackages DumpReused - compactDump veryCompact quote - HighBit undefPrint globPrint - PrintRet UsageOnl frame - AutoTrace TTY noTTY - ReadLine NonStop LineInfo - maxTraceLen recallCommand ShellBang - pager tkRunning ornaments - signalLevel warnLevel dieLevel - inhibit_exit ImmediateStop bareStringify - CreateTTY RemotePort windowSize - DollarCaretP OnlyAssertions WarnAssertions - ); + CommandSet + hashDepth arrayDepth dumpDepth + DumpDBFiles DumpPackages DumpReused + compactDump veryCompact quote + HighBit undefPrint globPrint + PrintRet UsageOnly frame + AutoTrace TTY noTTY + ReadLine NonStop LineInfo + maxTraceLen recallCommand ShellBang + pager tkRunning ornaments + signalLevel warnLevel dieLevel + inhibit_exit ImmediateStop bareStringify + CreateTTY RemotePort windowSize + DollarCaretP OnlyAssertions WarnAssertions +); @RememberOnROptions = qw(DollarCaretP OnlyAssertions); @@ -1035,26 +1039,26 @@ state. =cut %optionVars = ( - hashDepth => \$dumpvar::hashDepth, - arrayDepth => \$dumpvar::arrayDepth, - CommandSet => \$CommandSet, - DumpDBFiles => \$dumpvar::dumpDBFiles, - DumpPackages => \$dumpvar::dumpPackages, - DumpReused => \$dumpvar::dumpReused, - HighBit => \$dumpvar::quoteHighBit, - undefPrint => \$dumpvar::printUndef, - globPrint => \$dumpvar::globPrint, - UsageOnly => \$dumpvar::usageOnly, - CreateTTY => \$CreateTTY, - bareStringify => \$dumpvar::bareStringify, - frame => \$frame, - AutoTrace => \$trace, - inhibit_exit => \$inhibit_exit, - maxTraceLen => \$maxtrace, - ImmediateStop => \$ImmediateStop, - RemotePort => \$remoteport, - windowSize => \$window, - WarnAssertions => \$warnassertions, + hashDepth => \$dumpvar::hashDepth, + arrayDepth => \$dumpvar::arrayDepth, + CommandSet => \$CommandSet, + DumpDBFiles => \$dumpvar::dumpDBFiles, + DumpPackages => \$dumpvar::dumpPackages, + DumpReused => \$dumpvar::dumpReused, + HighBit => \$dumpvar::quoteHighBit, + undefPrint => \$dumpvar::printUndef, + globPrint => \$dumpvar::globPrint, + UsageOnly => \$dumpvar::usageOnly, + CreateTTY => \$CreateTTY, + bareStringify => \$dumpvar::bareStringify, + frame => \$frame, + AutoTrace => \$trace, + inhibit_exit => \$inhibit_exit, + maxTraceLen => \$maxtrace, + ImmediateStop => \$ImmediateStop, + RemotePort => \$remoteport, + windowSize => \$window, + WarnAssertions => \$warnassertions, ); =pod @@ -1102,7 +1106,7 @@ option is used. compactDump => 'dumpvar.pl', veryCompact => 'dumpvar.pl', quote => 'dumpvar.pl', - ); +); =pod @@ -1166,18 +1170,20 @@ then call the C function to save the pager name. # This routine makes sure $pager is set up so that '|' can use it. pager( + # If PAGER is defined in the environment, use it. - defined $ENV{PAGER} - ? $ENV{PAGER} + defined $ENV{PAGER} + ? $ENV{PAGER} # If not, see if Config.pm defines it. - : eval { require Config } && defined $Config::Config{pager} - ? $Config::Config{pager} + : eval { require Config } + && defined $Config::Config{pager} + ? $Config::Config{pager} # If not, fall back to 'more'. - : 'more' - ) - unless defined $pager; + : 'more' + ) + unless defined $pager; =pod @@ -1229,25 +1235,27 @@ yet so the parent will give them one later via C. =cut -# Save the current contents of the environment; we're about to +# Save the current contents of the environment; we're about to # much with it. We'll need this if we have to restart. $ini_pids = $ENV{PERLDB_PIDS}; -if (defined $ENV{PERLDB_PIDS}) { +if ( defined $ENV{PERLDB_PIDS} ) { + # We're a child. Make us a label out of the current PID structure - # recorded in PERLDB_PIDS plus our (new) PID. Mark us as not having + # recorded in PERLDB_PIDS plus our (new) PID. Mark us as not having # a term yet so the parent will give us one later via resetterm(). - $pids = "[$ENV{PERLDB_PIDS}]"; - $ENV{PERLDB_PIDS} .= "->$$"; - $term_pid = -1; + $pids = "[$ENV{PERLDB_PIDS}]"; + $ENV{PERLDB_PIDS} .= "->$$"; + $term_pid = -1; } ## end if (defined $ENV{PERLDB_PIDS... else { - # We're the parent PID. Initialize PERLDB_PID in case we end up with a + + # We're the parent PID. Initialize PERLDB_PID in case we end up with a # child debugger, and mark us as the parent, so we'll know to set up # more TTY's is we have to. $ENV{PERLDB_PIDS} = "$$"; - $pids = "{pid=$$}"; - $term_pid = $$; + $pids = "{pid=$$}"; + $term_pid = $$; } $pidprompt = ''; @@ -1265,9 +1273,9 @@ running interactively, this is C<.perldb>; if not, it's C. # As noted, this test really doesn't check accurately that the debugger # is running at a terminal or not. -if (-e "/dev/tty") { # this is the wrong metric! - $rcfile=".perldb"; -} +if ( -e "/dev/tty" ) { # this is the wrong metric! + $rcfile = ".perldb"; +} else { $rcfile = "perldb.ini"; } @@ -1293,7 +1301,7 @@ sub safe_do { local $SIG{__WARN__}; local $SIG{__DIE__}; - unless (is_safe_file($file)) { + unless ( is_safe_file($file) ) { CORE::warn < to 0 (XXX ostensibly to do straight reads). =cut else { + # Is Perl being run from a slave editor or graphical debugger? # If so, don't use readline, and set $slave_editor = 1. - $slave_editor = - ((defined $main::ARGV[0]) and ($main::ARGV[0] eq '-emacs')); - $rl = 0, shift (@main::ARGV) if $slave_editor; - #require Term::ReadLine; + $slave_editor = + ( ( defined $main::ARGV[0] ) and ( $main::ARGV[0] eq '-emacs' ) ); + $rl = 0, shift(@main::ARGV) if $slave_editor; + + #require Term::ReadLine; =pod @@ -1475,7 +1492,8 @@ We then determine what the console should be on various systems: =cut - if ($^O eq 'cygwin') { + if ( $^O eq 'cygwin' ) { + # /dev/tty is binary. use stdin for textmode undef $console; } @@ -1484,7 +1502,7 @@ We then determine what the console should be on various systems: =cut - elsif (-e "/dev/tty") { + elsif ( -e "/dev/tty" ) { $console = "/dev/tty"; } @@ -1492,7 +1510,7 @@ We then determine what the console should be on various systems: =cut - elsif ($^O eq 'dos' or -e "con" or $^O eq 'MSWin32') { + elsif ( $^O eq 'dos' or -e "con" or $^O eq 'MSWin32' ) { $console = "con"; } @@ -1501,10 +1519,10 @@ Console> if not. (Note that Mac OS X returns 'darwin', not 'MacOS'. Also note th =cut - elsif ($^O eq 'MacOS') { - if ($MacPerl::Version !~ /MPW/) { - $console = - "Dev:Console:Perl Debug"; # Separate window for application + elsif ( $^O eq 'MacOS' ) { + if ( $MacPerl::Version !~ /MPW/ ) { + $console = + "Dev:Console:Perl Debug"; # Separate window for application } else { $console = "Dev:Console"; @@ -1516,6 +1534,7 @@ Console> if not. (Note that Mac OS X returns 'darwin', not 'MacOS'. Also note th =cut else { + # everything else is ... $console = "sys\$command"; } @@ -1530,26 +1549,29 @@ with a slave editor, Epoc). =cut - if (($^O eq 'MSWin32') and ($slave_editor or defined $ENV{EMACS})) { + if ( ( $^O eq 'MSWin32' ) and ( $slave_editor or defined $ENV{EMACS} ) ) { + # /dev/tty is binary. use stdin for textmode - $console = undef; - } + $console = undef; + } + + if ( $^O eq 'NetWare' ) { - if ($^O eq 'NetWare') { # /dev/tty is binary. use stdin for textmode $console = undef; } # In OS/2, we need to use STDIN to get textmode too, even though # it pretty much looks like Unix otherwise. - if (defined $ENV{OS2_SHELL} and ($slave_editor or $ENV{WINDOWID})) - { # In OS/2 - $console = undef; - } - # EPOC also falls into the 'got to use STDIN' camp. - if ($^O eq 'epoc') { - $console = undef; - } + if ( defined $ENV{OS2_SHELL} and ( $slave_editor or $ENV{WINDOWID} ) ) + { # In OS/2 + $console = undef; + } + + # EPOC also falls into the 'got to use STDIN' camp. + if ( $^O eq 'epoc' ) { + $console = undef; + } =pod @@ -1557,7 +1579,7 @@ If there is a TTY hanging around from a parent, we use that as the console. =cut - $console = $tty if defined $tty; + $console = $tty if defined $tty; =head2 SOCKET HANDLING @@ -1571,18 +1593,19 @@ and then tries to connect the input and output filehandles to it. =cut # Handle socket stuff. - - if (defined $remoteport) { + + if ( defined $remoteport ) { + # If RemotePort was defined in the options, connect input and output # to the socket. - require IO::Socket; - $OUT = new IO::Socket::INET( - Timeout => '10', - PeerAddr => $remoteport, - Proto => 'tcp', + require IO::Socket; + $OUT = new IO::Socket::INET( + Timeout => '10', + PeerAddr => $remoteport, + Proto => 'tcp', ); - if (!$OUT) { die "Unable to connect to remote host: $remoteport\n"; } - $IN = $OUT; + if ( !$OUT ) { die "Unable to connect to remote host: $remoteport\n"; } + $IN = $OUT; } ## end if (defined $remoteport) =pod @@ -1597,57 +1620,61 @@ and if we can. # Non-socket. else { + # Two debuggers running (probably a system or a backtick that invokes # the debugger itself under the running one). create a new IN and OUT - # filehandle, and do the necessary mojo to create a new tty if we + # filehandle, and do the necessary mojo to create a new tty if we # know how, and we can. - create_IN_OUT(4) if $CreateTTY & 4; - if ($console) { + create_IN_OUT(4) if $CreateTTY & 4; + if ($console) { + # If we have a console, check to see if there are separate ins and # outs to open. (They are assumed identiical if not.) + my ( $i, $o ) = split /,/, $console; + $o = $i unless defined $o; - - my ($i, $o) = split /,/, $console; - $o = $i unless defined $o; # read/write on in, or just read, or read on STDIN. - open(IN,"+<$i") || - open(IN,"<$i") || - open(IN,"<&STDIN"); + open( IN, "+<$i" ) + || open( IN, "<$i" ) + || open( IN, "<&STDIN" ); + # read/write/create/clobber out, or write/create/clobber out, # or merge with STDERR, or merge with STDOUT. - open(OUT, "+>$o") || - open(OUT, ">$o") || - open(OUT, ">&STDERR") || - open(OUT, ">&STDOUT"); # so we don't dongle stdout - - } ## end if ($console) - elsif (not defined $console) { - # No console. Open STDIN. - open(IN, "<&STDIN"); - - # merge with STDERR, or with STDOUT. - open(OUT, ">&STDERR") || - open(OUT, ">&STDOUT"); # so we don't dongle stdout - $console = 'STDIN/OUT'; + open( OUT, "+>$o" ) + || open( OUT, ">$o" ) + || open( OUT, ">&STDERR" ) + || open( OUT, ">&STDOUT" ); # so we don't dongle stdout + + } ## end if ($console) + elsif ( not defined $console ) { + + # No console. Open STDIN. + open( IN, "<&STDIN" ); + + # merge with STDERR, or with STDOUT. + open( OUT, ">&STDERR" ) + || open( OUT, ">&STDOUT" ); # so we don't dongle stdout + $console = 'STDIN/OUT'; } ## end elsif (not defined $console) # Keep copies of the filehandles so that when the pager runs, it # can close standard input without clobbering ours. - $IN = \*IN, $OUT = \*OUT if $console or not defined $console; - } ## end elsif (from if(defined $remoteport)) - - # Unbuffer DB::OUT. We need to see responses right away. - my $previous = select($OUT); - $| = 1; # for DB::OUT - select($previous); - - # Line info goes to debugger output unless pointed elsewhere. - # Pointing elsewhere makes it possible for slave editors to - # keep track of file and position. We have both a filehandle - # and a I/O description to keep track of. - $LINEINFO = $OUT unless defined $LINEINFO; - $lineinfo = $console unless defined $lineinfo; + $IN = \*IN, $OUT = \*OUT if $console or not defined $console; + } ## end elsif (from if(defined $remoteport)) + + # Unbuffer DB::OUT. We need to see responses right away. + my $previous = select($OUT); + $| = 1; # for DB::OUT + select($previous); + + # Line info goes to debugger output unless pointed elsewhere. + # Pointing elsewhere makes it possible for slave editors to + # keep track of file and position. We have both a filehandle + # and a I/O description to keep track of. + $LINEINFO = $OUT unless defined $LINEINFO; + $lineinfo = $console unless defined $lineinfo; + =pod To finish initialization, we show the debugger greeting, @@ -1655,21 +1682,21 @@ and then call the C subroutine if there is one. =cut - # Show the debugger greeting. - $header =~ s/.Header: ([^,]+),v(\s+\S+\s+\S+).*$/$1$2/; - unless ($runnonstop) { - local $\ = ''; - local $, = ''; - if ($term_pid eq '-1') { - print $OUT "\nDaughter DB session started...\n"; - } - else { - print $OUT "\nLoading DB routines from $header\n"; - print $OUT ( - "Editor support ", - $slave_editor ? "enabled" : "available", ".\n" - ); - print $OUT + # Show the debugger greeting. + $header =~ s/.Header: ([^,]+),v(\s+\S+\s+\S+).*$/$1$2/; + unless ($runnonstop) { + local $\ = ''; + local $, = ''; + if ( $term_pid eq '-1' ) { + print $OUT "\nDaughter DB session started...\n"; + } + else { + print $OUT "\nLoading DB routines from $header\n"; + print $OUT ( + "Editor support ", + $slave_editor ? "enabled" : "available", ".\n" + ); + print $OUT "\nEnter h or `h h' for help, or `$doccmd perldebug' for more help.\n\n"; } ## end else [ if ($term_pid eq '-1') } ## end unless ($runnonstop) @@ -1681,15 +1708,16 @@ and then call the C subroutine if there is one. for (@args) { # Make sure backslashes before single quotes are stripped out, and # keep args unless they are numeric (XXX why?) - s/\'/\\\'/g; - s/(.*)/'$1'/ unless /^-?[\d.]+$/; + # s/\'/\\\'/g; # removed while not justified understandably + # s/(.*)/'$1'/ unless /^-?[\d.]+$/; # ditto } -# If there was an afterinit() sub defined, call it. It will get +# If there was an afterinit() sub defined, call it. It will get # executed in our scope, so it can fiddle with debugger globals. -if (defined &afterinit) { # May be defined in $rcfile +if ( defined &afterinit ) { # May be defined in $rcfile &afterinit(); } + # Inform us about "Stack dump during die enabled ..." in dieLevel(). $I_m_init = 1; @@ -1716,27 +1744,30 @@ sub DB { # Check for whether we should be running continuously or not. # _After_ the perl program is compiled, $single is set to 1: - if ($single and not $second_time++) { + if ( $single and not $second_time++ ) { + # Options say run non-stop. Run until we get an interrupt. - if ($runnonstop) { # Disable until signal - # If there's any call stack in place, turn off single - # stepping into subs throughout the stack. - for ($i = 0 ; $i <= $stack_depth ;) { - $stack[$i++] &= ~1; - } + if ($runnonstop) { # Disable until signal + # If there's any call stack in place, turn off single + # stepping into subs throughout the stack. + for ( $i = 0 ; $i <= $stack_depth ; ) { + $stack[ $i++ ] &= ~1; + } + # And we are now no longer in single-step mode. - $single = 0; + $single = 0; # If we simply returned at this point, we wouldn't get # the trace info. Fall on through. - # return; + # return; } ## end if ($runnonstop) - elsif ($ImmediateStop) { - # We are supposed to stop here; XXX probably a break. - $ImmediateStop = 0; # We've processed it; turn it off - $signal = 1; # Simulate an interrupt to force - # us into the command loop + elsif ($ImmediateStop) { + + # We are supposed to stop here; XXX probably a break. + $ImmediateStop = 0; # We've processed it; turn it off + $signal = 1; # Simulate an interrupt to force + # us into the command loop } } ## end if ($single and not $second_time... @@ -1750,42 +1781,45 @@ sub DB { # Since DB::DB gets called after every line, we can use caller() to # figure out where we last were executing. Sneaky, eh? This works because - # caller is returning all the extra information when called from the + # caller is returning all the extra information when called from the # debugger. - local($package, $filename, $line) = caller; + local ( $package, $filename, $line ) = caller; local $filename_ini = $filename; # set up the context for DB::eval, so it can properly execute # code on behalf of the user. We add the package in so that the # code is eval'ed in the proper package (not in the debugger!). local $usercontext = - '($@, $!, $^E, $,, $/, $\, $^W) = @saved;' . - "package $package;"; + '($@, $!, $^E, $,, $/, $\, $^W) = @saved;' . "package $package;"; # Create an alias to the active file magical array to simplify # the code here. - local(*dbline) = $main::{'_<' . $filename}; + local (*dbline) = $main::{ '_<' . $filename }; # we need to check for pseudofiles on Mac OS (these are files # not attached to a filename, but instead stored in Dev:Pseudo) - if ($^O eq 'MacOS' && $#dbline < 0) { - $filename_ini = $filename = 'Dev:Pseudo'; - *dbline = $main::{'_<' . $filename}; + if ( $^O eq 'MacOS' && $#dbline < 0 ) { + $filename_ini = $filename = 'Dev:Pseudo'; + *dbline = $main::{ '_<' . $filename }; } # Last line in the program. local $max = $#dbline; # if we have something here, see if we should break. - if ($dbline{$line} && (($stop,$action) = split(/\0/,$dbline{$line}))) { + if ( $dbline{$line} + && ( ( $stop, $action ) = split( /\0/, $dbline{$line} ) ) ) + { + # Stop if the stop criterion says to just stop. - if ($stop eq '1') { + if ( $stop eq '1' ) { $signal |= 1; } + # It's a conditional stop; eval it in the user's context and # see if we should stop. If so, remove the one-time sigil. elsif ($stop) { - $evalarg = "\$DB::signal |= 1 if do {$stop}"; + $evalarg = "\$DB::signal |= 1 if do {$stop}"; &eval; $dbline{$line} =~ s/;9($|\0)/$1/; } @@ -1796,27 +1830,27 @@ sub DB { my $was_signal = $signal; # If we have any watch expressions ... - if ($trace & 2) { - for (my $n = 0; $n <= $#to_watch; $n++) { - $evalarg = $to_watch[$n]; - local $onetimeDump; # Do not output results + if ( $trace & 2 ) { + for ( my $n = 0 ; $n <= $#to_watch ; $n++ ) { + $evalarg = $to_watch[$n]; + local $onetimeDump; # Tell DB::eval() to not output results # Fix context DB::eval() wants to return an array, but # we need a scalar here. - my ($val) = - join("', '", &eval); # Fix context (&eval is doing array) - $val = ( (defined $val) ? "'$val'" : 'undef' ); + my ($val) = join( "', '", &eval ); + $val = ( ( defined $val ) ? "'$val'" : 'undef' ); # Did it change? - if ($val ne $old_watch[$n]) { + if ( $val ne $old_watch[$n] ) { + # Yep! Show the difference, and fake an interrupt. - $signal = 1; - print $OUT <. This can be done with =cut - # If there's a user-defined DB::watchfunction, call it with the + # If there's a user-defined DB::watchfunction, call it with the # current package, filename, and line. The function executes in # the DB:: package. - if ($trace & 4) { # User-installed watch - return - if watchfunction($package, $filename, $line) - and not $single - and not $was_signal - and not ($trace & ~4); + if ( $trace & 4 ) { # User-installed watch + return + if watchfunction( $package, $filename, $line ) + and not $single + and not $was_signal + and not( $trace & ~4 ); } ## end if ($trace & 4) - # Pick up any alteration to $signal in the watchfunction, and + # Pick up any alteration to $signal in the watchfunction, and # turn off the signal now. $was_signal = $signal; $signal = 0; @@ -1879,13 +1913,15 @@ won't cause trouble, and we say that the program is over. # Check to see if we should grab control ($single true, # trace set appropriately, or we got a signal). - if ($single || ($trace & 1) || $was_signal) { + if ( $single || ( $trace & 1 ) || $was_signal ) { + # Yes, grab control. - if ($slave_editor) { + if ($slave_editor) { + # Tell the editor to update its position. - $position = "\032\032$filename:$line:0\n"; - print_lineinfo($position); - } + $position = "\032\032$filename:$line:0\n"; + print_lineinfo($position); + } =pod @@ -1895,20 +1931,21 @@ to enter commands and have a valid context to be in. =cut + elsif ( $package eq 'DB::fake' ) { - elsif ($package eq 'DB::fake') { # Fallen off the end already. - $term || &setterm; - print_help(< to quit or B to restart, use B I to avoid stopping after program termination, B, B or B to get additional info. EOP + # Set the DB::eval context appropriately. - $package = 'main'; - $usercontext = - '($@, $!, $^E, $,, $/, $\, $^W) = @saved;' . - "package $package;"; # this won't let them modify, alas + $package = 'main'; + $usercontext = + '($@, $!, $^E, $,, $/, $\, $^W) = @saved;' + . "package $package;"; # this won't let them modify, alas } ## end elsif ($package eq 'DB::fake') =pod @@ -1919,41 +1956,42 @@ number information, and print that. =cut - else { + else { + # Still somewhere in the midst of execution. Set up the # debugger prompt. $sub =~ s/\'/::/; # Swap Perl 4 package separators (') to - # Perl 5 ones (sorry, we don't print Klingon + # Perl 5 ones (sorry, we don't print Klingon #module names) - $prefix = $sub =~ /::/ ? "" : "${'package'}::"; - $prefix .= "$sub($filename:"; - $after = ($dbline[$line] =~ /\n$/ ? '' : "\n"); + $prefix = $sub =~ /::/ ? "" : "${'package'}::"; + $prefix .= "$sub($filename:"; + $after = ( $dbline[$line] =~ /\n$/ ? '' : "\n" ); # Break up the prompt if it's really long. - if (length($prefix) > 30) { - $position = "$prefix$line):\n$line:\t$dbline[$line]$after"; - $prefix = ""; - $infix = ":\t"; - } - else { - $infix = "):\t"; - $position = "$prefix$line$infix$dbline[$line]$after"; - } + if ( length($prefix) > 30 ) { + $position = "$prefix$line):\n$line:\t$dbline[$line]$after"; + $prefix = ""; + $infix = ":\t"; + } + else { + $infix = "):\t"; + $position = "$prefix$line$infix$dbline[$line]$after"; + } # Print current line info, indenting if necessary. - if ($frame) { - print_lineinfo(' ' x $stack_depth, "$line:\t$dbline[$line]$after"); - } - else { - print_lineinfo($position); - } - + if ($frame) { + print_lineinfo( ' ' x $stack_depth, + "$line:\t$dbline[$line]$after" ); + } + else { + print_lineinfo($position); + } # Scan forward, stopping at either the end or the next # unbreakable line. - for ($i = $line + 1 ; $i <= $max && $dbline[$i] == 0; ++$i) - { #{ vi + for ( $i = $line + 1 ; $i <= $max && $dbline[$i] == 0 ; ++$i ) + { #{ vi # Drop out on null statements, block closers, and comments. last if $dbline[$i] =~ /^\s*[\;\}\#\n]/; @@ -1963,15 +2001,16 @@ number information, and print that. # Append a newline if the line doesn't have one. Can happen # in eval'ed text, for instance. - $after = ($dbline[$i] =~ /\n$/ ? '' : "\n"); + $after = ( $dbline[$i] =~ /\n$/ ? '' : "\n" ); # Next executable line. $incr_pos = "$prefix$i$infix$dbline[$i]$after"; $position .= $incr_pos; if ($frame) { + # Print it indented if tracing is on. - print_lineinfo(' ' x $stack_depth, - "$i:\t$dbline[$i]$after"); + print_lineinfo( ' ' x $stack_depth, + "$i:\t$dbline[$i]$after" ); } else { print_lineinfo($incr_pos); @@ -1992,26 +2031,27 @@ If there are any preprompt actions, execute those as well. # Are we nested another level (e.g., did we evaluate a function # that had a breakpoint in it at the debugger prompt)? - if ($single || $was_signal) { + if ( $single || $was_signal ) { + # Yes, go down a level. - local $level = $level + 1; + local $level = $level + 1; # Do any pre-prompt actions. - foreach $evalarg (@$pre) { - &eval; - } + foreach $evalarg (@$pre) { + &eval; + } # Complain about too much recursion if we passed the limit. - print $OUT $stack_depth . " levels deep in subroutine calls!\n" + print $OUT $stack_depth . " levels deep in subroutine calls!\n" if $single & 4; # The line we're currently on. Set $incr to -1 to stay here # until we get a command that tells us to advance. - $start = $line; - $incr = -1; # for backward motion. + $start = $line; + $incr = -1; # for backward motion. # Tack preprompt debugger actions ahead of any actual input. - @typeahead = (@$pretype, @typeahead); + @typeahead = ( @$pretype, @typeahead ); =head2 WHERE ARE WE? @@ -2058,21 +2098,27 @@ the new command. This is faster, but perhaps a bit more convoluted. # # If we have a terminal for input, and we get something back # from readline(), keep on processing. - CMD: - while ( + CMD: + while ( + # We have a terminal, or can get one ... - ($term || &setterm), + ( $term || &setterm ), + # ... and it belogs to this PID or we get one for this PID ... - ($term_pid == $$ or resetterm(1)), - defined ( + ( $term_pid == $$ or resetterm(1) ), + # ... and we got a line of command input ... - $cmd=&readline( - "$pidprompt DB" . ('<' x $level) . ($#hist+1) . - ('>' x $level) . " " + defined( + $cmd = &readline( + "$pidprompt DB" + . ( '<' x $level ) + . ( $#hist + 1 ) + . ( '>' x $level ) . " " ) ) ) { + # ... try to execute the input as debugger commands. # Don't stop running. @@ -2082,10 +2128,10 @@ the new command. This is faster, but perhaps a bit more convoluted. $signal = 0; # Handle continued commands (ending with \): - $cmd =~ s/\\$/\n/ && do { - $cmd .= &readline(" cont: "); - redo CMD; - }; + $cmd =~ s/\\$/\n/ && do { + $cmd .= &readline(" cont: "); + redo CMD; + }; =head4 The null command @@ -2099,18 +2145,18 @@ it up. =cut # Empty input means repeat the last command. - $cmd =~ /^$/ && ($cmd = $laststep); - chomp($cmd); # get rid of the annoying extra newline - push (@hist, $cmd) if length($cmd) > 1; - push (@truehist, $cmd); - - # This is a restart point for commands that didn't arrive - # via direct user input. It allows us to 'redo PIPE' to - # re-execute command processing without reading a new command. + $cmd =~ /^$/ && ( $cmd = $laststep ); + chomp($cmd); # get rid of the annoying extra newline + push( @hist, $cmd ) if length($cmd) > 1; + push( @truehist, $cmd ); + + # This is a restart point for commands that didn't arrive + # via direct user input. It allows us to 'redo PIPE' to + # re-execute command processing without reading a new command. PIPE: { - $cmd =~ s/^\s+//s; # trim annoying leading whitespace - $cmd =~ s/\s+$//s; # trim annoying trailing whitespace - ($i) = split (/\s+/, $cmd); + $cmd =~ s/^\s+//s; # trim annoying leading whitespace + $cmd =~ s/\s+$//s; # trim annoying trailing whitespace + ($i) = split( /\s+/, $cmd ); =head3 COMMAND ALIASES @@ -2122,7 +2168,8 @@ completely replacing it. =cut # See if there's an alias for the command, and set it up if so. - if ($alias{$i}) { + if ( $alias{$i} ) { + # Squelch signal handling; we want to keep control here # if something goes loco during the alias eval. local $SIG{__DIE__}; @@ -2165,13 +2212,13 @@ Turn tracing on or off. Inverts the appropriate bit in C<$trace> (q.v.). =cut - $cmd =~ /^t$/ && do { - $trace ^= 1; - local $\ = ''; - print $OUT "Trace = " . (($trace & 1) ? "on" : "off" ) . - "\n"; - next CMD; - }; + $cmd =~ /^t$/ && do { + $trace ^= 1; + local $\ = ''; + print $OUT "Trace = " + . ( ( $trace & 1 ) ? "on" : "off" ) . "\n"; + next CMD; + }; =head4 C - list subroutines matching/not matching a pattern @@ -2179,27 +2226,27 @@ Walks through C<%sub>, checking to see whether or not to print the name. =cut - $cmd =~ /^S(\s+(!)?(.+))?$/ && do { + $cmd =~ /^S(\s+(!)?(.+))?$/ && do { - $Srev = defined $2; # Reverse scan? + $Srev = defined $2; # Reverse scan? $Spatt = $3; # The pattern (if any) to use. $Snocheck = !defined $1; # No args - print all subs. # Need to make these sane here. - local $\ = ''; - local $, = ''; + local $\ = ''; + local $, = ''; # Search through the debugger's magical hash of subs. # If $nocheck is true, just print the sub name. # Otherwise, check it against the pattern. We then use # the XOR trick to reverse the condition as required. - foreach $subname (sort(keys %sub)) { - if ($Snocheck or $Srev^($subname =~ /$Spatt/)) { - print $OUT $subname,"\n"; - } - } - next CMD; - }; + foreach $subname ( sort( keys %sub ) ) { + if ( $Snocheck or $Srev ^ ( $subname =~ /$Spatt/ ) ) { + print $OUT $subname, "\n"; + } + } + next CMD; + }; =head4 C - list variables in current package @@ -2208,7 +2255,7 @@ appropriate C command and fall through. =cut - $cmd =~ s/^X\b/V $package/; + $cmd =~ s/^X\b/V $package/; =head4 C - list variables @@ -2218,28 +2265,30 @@ Uses C to dump out the current values for selected variables. # Bare V commands get the currently-being-debugged package # added. - $cmd =~ /^V$/ && do { - $cmd = "V $package"; - }; + $cmd =~ /^V$/ && do { + $cmd = "V $package"; + }; # V - show variables in package. $cmd =~ /^V\b\s*(\S+)\s*(.*)/ && do { + # Save the currently selected filehandle and # force output to debugger's filehandle (dumpvar # just does "print" for output). - local ($savout) = select($OUT); + local ($savout) = select($OUT); # Grab package name and variables to dump. - $packname = $1; - @vars = split (' ', $2); + $packname = $1; + @vars = split( ' ', $2 ); # If main::dumpvar isn't here, get it. - do 'dumpvar.pl' unless defined &main::dumpvar; - if (defined &main::dumpvar) { + do 'dumpvar.pl' unless defined &main::dumpvar; + if ( defined &main::dumpvar ) { + # We got it. Turn off subroutine entry/exit messages # for the moment, along with return values. - local $frame = 0; - local $doret = -2; + local $frame = 0; + local $doret = -2; # must detect sigpipe failures - not catching # then will cause the debugger to die. @@ -2247,26 +2296,28 @@ Uses C to dump out the current values for selected variables. &main::dumpvar( $packname, defined $option{dumpDepth} - ? $option{dumpDepth} - : -1, # assume -1 unless specified + ? $option{dumpDepth} + : -1, # assume -1 unless specified @vars - ); - }; + ); + }; + + # The die doesn't need to include the $@, because + # it will automatically get propagated for us. + if ($@) { + die unless $@ =~ /dumpvar print failed/; + } + } ## end if (defined &main::dumpvar) + else { + + # Couldn't load dumpvar. + print $OUT "dumpvar.pl not available.\n"; + } - # The die doesn't need to include the $@, because - # it will automatically get propagated for us. - if ($@) { - die unless $@ =~ /dumpvar print failed/; - } - } ## end if (defined &main::dumpvar) - else { - # Couldn't load dumpvar. - print $OUT "dumpvar.pl not available.\n"; - } # Restore the output filehandle, and go round again. - select($savout); - next CMD; - }; + select($savout); + next CMD; + }; =head4 C - evaluate and print an expression @@ -2275,15 +2326,15 @@ via C instead of just printing it directly. =cut - $cmd =~ s/^x\b/ / && do { # Remainder gets done by DB::eval() - $onetimeDump = 'dump'; # main::dumpvar shows the output + $cmd =~ s/^x\b/ / && do { # Remainder gets done by DB::eval() + $onetimeDump = 'dump'; # main::dumpvar shows the output # handle special "x 3 blah" syntax XXX propagate # doc back to special variables. - if ($cmd =~ s/^\s*(\d+)(?=\s)/ /) { - $onetimedumpDepth = $1; - } - }; + if ( $cmd =~ s/^\s*(\d+)(?=\s)/ / ) { + $onetimedumpDepth = $1; + } + }; =head4 C - print methods @@ -2291,64 +2342,64 @@ Just uses C to determine what methods are available. =cut - $cmd =~ s/^m\s+([\w:]+)\s*$/ / && do { - methods($1); - next CMD; - }; + $cmd =~ s/^m\s+([\w:]+)\s*$/ / && do { + methods($1); + next CMD; + }; # m expr - set up DB::eval to do the work - $cmd =~ s/^m\b/ / && do { # Rest gets done by DB::eval() - $onetimeDump = 'methods'; # method output gets used there - }; + $cmd =~ s/^m\b/ / && do { # Rest gets done by DB::eval() + $onetimeDump = 'methods'; # method output gets used there + }; =head4 C - switch files =cut - $cmd =~ /^f\b\s*(.*)/ && do { - $file = $1; - $file =~ s/\s+$//; + $cmd =~ /^f\b\s*(.*)/ && do { + $file = $1; + $file =~ s/\s+$//; # help for no arguments (old-style was return from sub). - if (!$file) { - print $OUT "The old f command is now the r command.\n"; # hint - print $OUT "The new f command switches filenames.\n"; - next CMD; - } ## end if (!$file) + if ( !$file ) { + print $OUT + "The old f command is now the r command.\n"; # hint + print $OUT "The new f command switches filenames.\n"; + next CMD; + } ## end if (!$file) # if not in magic file list, try a close match. - if (!defined $main::{'_<' . $file}) { - if (($try) = grep(m#^_<.*$file#, keys %main::)) { - { - $try = substr($try,2); - print $OUT - "Choosing $try matching `$file':\n"; - $file = $try; - } - } ## end if (($try) = grep(m#^_<.*$file#... - } ## end if (!defined $main::{ ... + if ( !defined $main::{ '_<' . $file } ) { + if ( ($try) = grep( m#^_<.*$file#, keys %main:: ) ) { + { + $try = substr( $try, 2 ); + print $OUT "Choosing $try matching `$file':\n"; + $file = $try; + } + } ## end if (($try) = grep(m#^_<.*$file#... + } ## end if (!defined $main::{ ... # If not successfully switched now, we failed. - if (!defined $main::{'_<' . $file}) { - print $OUT "No file matching `$file' is loaded.\n"; - next CMD; - } + if ( !defined $main::{ '_<' . $file } ) { + print $OUT "No file matching `$file' is loaded.\n"; + next CMD; + } - # We switched, so switch the debugger internals around. - elsif ($file ne $filename) { - *dbline = $main::{ '_<' . $file }; - $max = $#dbline; - $filename = $file; - $start = 1; - $cmd = "l"; - } ## end elsif ($file ne $filename) - - # We didn't switch; say we didn't. - else { - print $OUT "Already in $file.\n"; - next CMD; - } - }; + # We switched, so switch the debugger internals around. + elsif ( $file ne $filename ) { + *dbline = $main::{ '_<' . $file }; + $max = $#dbline; + $filename = $file; + $start = 1; + $cmd = "l"; + } ## end elsif ($file ne $filename) + + # We didn't switch; say we didn't. + else { + print $OUT "Already in $file.\n"; + next CMD; + } + }; =head4 C<.> - return to last-executed line. @@ -2358,19 +2409,19 @@ and then we look up the line in the magical C<%dbline> hash. =cut # . command. - $cmd =~ /^\.$/ && do { - $incr = -1; # for backward motion. + $cmd =~ /^\.$/ && do { + $incr = -1; # stay at current line # Reset everything to the old location. - $start = $line; - $filename = $filename_ini; - *dbline = $main::{'_<' . $filename}; - $max = $#dbline; + $start = $line; + $filename = $filename_ini; + *dbline = $main::{ '_<' . $filename }; + $max = $#dbline; # Now where are we? - print_lineinfo($position); - next CMD; - }; + print_lineinfo($position); + next CMD; + }; =head4 C<-> - back one window @@ -2382,15 +2433,16 @@ C<$start>) in C<$cmd> to be executed later. =cut # - - back a window. - $cmd =~ /^-$/ && do { + $cmd =~ /^-$/ && do { + # back up by a window; go to 1 if back too far. - $start -= $incr + $window + 1; - $start = 1 if $start <= 0; - $incr = $window - 1; + $start -= $incr + $window + 1; + $start = 1 if $start <= 0; + $incr = $window - 1; # Generate and execute a "l +" command (handled below). - $cmd = 'l ' . ($start) . '+'; - }; + $cmd = 'l ' . ($start) . '+'; + }; =head3 PRE-580 COMMANDS VS. NEW COMMANDS: C, EE, {, {{> @@ -2404,11 +2456,11 @@ deal with them instead of processing them in-line. =cut # All of these commands were remapped in perl 5.8.0; - # we send them off to the secondary dispatcher (see below). - $cmd =~ /^([aAbBhilLMoOPvwW]\b|[<>\{]{1,2})\s*(.*)/so && do { - &cmd_wrapper($1, $2, $line); - next CMD; - }; + # we send them off to the secondary dispatcher (see below). + $cmd =~ /^([aAbBhilLMoOPvwW]\b|[<>\{]{1,2})\s*(.*)/so && do { + &cmd_wrapper( $1, $2, $line ); + next CMD; + }; =head4 C - List lexicals in higher scope @@ -2435,10 +2487,10 @@ above the current one and then displays then using C. and next CMD; # Got all the modules we need. Find them and print them. - my @vars = split (' ', $2 || ''); + my @vars = split( ' ', $2 || '' ); # Find the pad. - my $h = eval { PadWalker::peek_my(($1 || 0) + 1) }; + my $h = eval { PadWalker::peek_my( ( $1 || 0 ) + 1 ) }; # Oops. Can't find it. $@ and $@ =~ s/ at .*//, &warn($@), next CMD; @@ -2447,12 +2499,10 @@ above the current one and then displays then using C. my $savout = select($OUT); # Have dumplex dump the lexicals. - dumpvar::dumplex( - $_, - $h->{$_}, + dumpvar::dumplex( $_, $h->{$_}, defined $option{dumpDepth} ? $option{dumpDepth} : -1, - @vars - ) for sort keys %$h; + @vars ) + for sort keys %$h; select($savout); next CMD; }; @@ -2473,15 +2523,17 @@ so a null command knows what to re-execute. =cut - # n - next + # n - next $cmd =~ /^n$/ && do { end_report(), next CMD if $finished and $level <= 1; + # Single step, but don't enter subs. $single = 2; + # Save for empty command (repeat last). - $laststep = $cmd; - last CMD; - }; + $laststep = $cmd; + last CMD; + }; =head4 C - single-step, entering subs @@ -2492,15 +2544,18 @@ subs. Also saves C as C<$lastcmd>. # s - single step. $cmd =~ /^s$/ && do { + # Get out and restart the command loop if program # has finished. - end_report(), next CMD if $finished and $level <= 1; + end_report(), next CMD if $finished and $level <= 1; + # Single step should enter subs. - $single = 1; + $single = 1; + # Save for empty command (repeat last). - $laststep = $cmd; - last CMD; - }; + $laststep = $cmd; + last CMD; + }; =head4 C - run continuously, setting an optional breakpoint @@ -2513,6 +2568,7 @@ in this and all call levels above this one. # c - start continuous execution. $cmd =~ /^c\b\s*([\w:]*)\s*$/ && do { + # Hey, show's over. The debugged program finished # executing already. end_report(), next CMD if $finished and $level <= 1; @@ -2520,10 +2576,10 @@ in this and all call levels above this one. # Capture the place to put a one-time break. $subname = $i = $1; - # Probably not needed, since we finish an interactive - # sub-session anyway... - # local $filename = $filename; - # local *dbline = *dbline; # XXX Would this work?! + # Probably not needed, since we finish an interactive + # sub-session anyway... + # local $filename = $filename; + # local *dbline = *dbline; # XXX Would this work?! # # The above question wonders if localizing the alias # to the magic array works or not. Since it's commented @@ -2531,40 +2587,44 @@ in this and all call levels above this one. # If the "subname" isn't all digits, we'll assume it # is a subroutine name, and try to find it. - if ($subname =~ /\D/) { # subroutine name - # Qualify it to the current package unless it's - # already qualified. + if ( $subname =~ /\D/ ) { # subroutine name + # Qualify it to the current package unless it's + # already qualified. $subname = $package . "::" . $subname unless $subname =~ /::/; + # find_sub will return "file:line_number" corresponding # to where the subroutine is defined; we call find_sub, - # break up the return value, and assign it in one + # break up the return value, and assign it in one # operation. - ($file,$i) = (find_sub($subname) =~ /^(.*):(.*)$/); + ( $file, $i ) = ( find_sub($subname) =~ /^(.*):(.*)$/ ); # Force the line number to be numeric. - $i += 0; + $i += 0; # If we got a line number, we found the sub. - if ($i) { + if ($i) { + # Switch all the debugger's internals around so # we're actually working with that file. - $filename = $file; - *dbline = $main::{'_<' . $filename}; + $filename = $file; + *dbline = $main::{ '_<' . $filename }; + # Mark that there's a breakpoint in this file. - $had_breakpoints{$filename} |= 1; + $had_breakpoints{$filename} |= 1; + # Scan forward to the first executable line # after the 'sub whatever' line. - $max = $#dbline; - ++$i while $dbline[$i] == 0 && $i < $max; - } ## end if ($i) + $max = $#dbline; + ++$i while $dbline[$i] == 0 && $i < $max; + } ## end if ($i) # We didn't find a sub by that name. - else { - print $OUT "Subroutine $subname not found.\n"; - next CMD; - } - } ## end if ($subname =~ /\D/) + else { + print $OUT "Subroutine $subname not found.\n"; + next CMD; + } + } ## end if ($subname =~ /\D/) # At this point, either the subname was all digits (an # absolute line-break request) or we've scanned through @@ -2572,10 +2632,10 @@ in this and all call levels above this one. # for an executable, which we may or may not have found. # # If $i (which we set $subname from) is non-zero, we - # got a request to break at some line somewhere. On - # one hand, if there wasn't any real subroutine name - # involved, this will be a request to break in the current - # file at the specified line, so we have to check to make + # got a request to break at some line somewhere. On + # one hand, if there wasn't any real subroutine name + # involved, this will be a request to break in the current + # file at the specified line, so we have to check to make # sure that the line specified really is breakable. # # On the other hand, if there was a subname supplied, the @@ -2587,23 +2647,24 @@ in this and all call levels above this one. # On the gripping hand, we can't do anything unless the # current value of $i points to a valid breakable line. # Check that. - if ($i) { + if ($i) { + # Breakable? - if ($dbline[$i] == 0) { - print $OUT "Line $i not breakable.\n"; - next CMD; - } + if ( $dbline[$i] == 0 ) { + print $OUT "Line $i not breakable.\n"; + next CMD; + } + # Yes. Set up the one-time-break sigil. - $dbline{$i} =~ - s/($|\0)/;9$1/; # add one-time-only b.p. - } ## end if ($i) + $dbline{$i} =~ s/($|\0)/;9$1/; # add one-time-only b.p. + } ## end if ($i) # Turn off stack tracing from here up. - for ($i=0; $i <= $stack_depth; ) { - $stack[$i++] &= ~1; - } - last CMD; - }; + for ( $i = 0 ; $i <= $stack_depth ; ) { + $stack[ $i++ ] &= ~1; + } + last CMD; + }; =head4 C - return from a subroutine @@ -2616,15 +2677,18 @@ appropriately, and force us out of the command loop. =cut # r - return from the current subroutine. - $cmd =~ /^r$/ && do { + $cmd =~ /^r$/ && do { + # Can't do anythign if the program's over. - end_report(), next CMD if $finished and $level <= 1; + end_report(), next CMD if $finished and $level <= 1; + # Turn on stack trace. - $stack[$stack_depth] |= 1; + $stack[$stack_depth] |= 1; + # Print return value unless the stack is empty. - $doret = $option{PrintRet} ? $stack_depth - 1 : -2; - last CMD; - }; + $doret = $option{PrintRet} ? $stack_depth - 1 : -2; + last CMD; + }; =head4 C - restart @@ -2635,30 +2699,33 @@ and the debugger. =cut # R - restart execution. - $cmd =~ /^R$/ && do { + $cmd =~ /^R$/ && do { + # I may not be able to resurrect you, but here goes ... - print $OUT + print $OUT "Warning: some settings and command-line options may be lost!\n"; - my (@script, @flags, $cl); + my ( @script, @flags, $cl ); # If warn was on before, turn it on again. - push @flags, '-w' if $ini_warn; - if ($ini_assertion and @{^ASSERTING}) { - push @flags, (map { /\:\^\(\?\:(.*)\)\$\)/ ? - "-A$1" : "-A$_" } @{^ASSERTING}); - } + push @flags, '-w' if $ini_warn; + if ( $ini_assertion and @{^ASSERTING} ) { + push @flags, + ( map { /\:\^\(\?\:(.*)\)\$\)/ ? "-A$1" : "-A$_" } + @{^ASSERTING} ); + } + # Rebuild the -I flags that were on the initial # command line. - for (@ini_INC) { - push @flags, '-I', $_; - } + for (@ini_INC) { + push @flags, '-I', $_; + } # Turn on taint if it was on before. - push @flags, '-T' if ${^TAINT}; + push @flags, '-T' if ${^TAINT}; - # Arrange for setting the old INC: + # Arrange for setting the old INC: # Save the current @init_INC in the environment. - set_list("PERLDB_INC", @ini_INC); + set_list( "PERLDB_INC", @ini_INC ); # If this was a perl one-liner, go to the "file" # corresponding to the one-liner read all the lines @@ -2666,18 +2733,18 @@ and the debugger. # to be added back on again when 'perl -d' runs: that's # the 'require perl5db.pl;' line), and add them back on # to the command line to be executed. - if ($0 eq '-e') { - for (1..$#{'::_<-e'}) { # The first line is PERL5DB - chomp ($cl = ${'::_<-e'}[$_]); - push @script, '-e', $cl; - } - } ## end if ($0 eq '-e') - - # Otherwise we just reuse the original name we had + if ( $0 eq '-e' ) { + for ( 1 .. $#{'::_<-e'} ) { # The first line is PERL5DB + chomp( $cl = ${'::_<-e'}[$_] ); + push @script, '-e', $cl; + } + } ## end if ($0 eq '-e') + + # Otherwise we just reuse the original name we had # before. - else { - @script = $0; - } + else { + @script = $0; + } =pod @@ -2690,21 +2757,23 @@ just popped into environment variables directly. # If the terminal supported history, grab it and # save that in the environment. - set_list("PERLDB_HIST", - $term->Features->{getHistory} - ? $term->GetHistory - : @hist); + set_list( "PERLDB_HIST", + $term->Features->{getHistory} + ? $term->GetHistory + : @hist ); + # Find all the files that were visited during this # session (i.e., the debugger had magic hashes # corresponding to them) and stick them in the environment. - my @had_breakpoints = keys %had_breakpoints; - set_list("PERLDB_VISITED", @had_breakpoints); + my @had_breakpoints = keys %had_breakpoints; + set_list( "PERLDB_VISITED", @had_breakpoints ); # Save the debugger options we chose. - set_list("PERLDB_OPT", options2remember()); + set_list( "PERLDB_OPT", %option ); + # set_list( "PERLDB_OPT", options2remember() ); # Save the break-on-loads. - set_list("PERLDB_ON_LOAD", %break_on_load); + set_list( "PERLDB_ON_LOAD", %break_on_load ); =pod @@ -2717,86 +2786,96 @@ variable via C. # Go through all the breakpoints and make sure they're # still valid. - my @hard; - for (0 .. $#had_breakpoints) { + my @hard; + for ( 0 .. $#had_breakpoints ) { + # We were in this file. - my $file = $had_breakpoints[$_]; + my $file = $had_breakpoints[$_]; # Grab that file's magic line hash. - *dbline = $main::{'_<' . $file}; + *dbline = $main::{ '_<' . $file }; # Skip out if it doesn't exist, or if the breakpoint - # is in a postponed file (we'll do postponed ones + # is in a postponed file (we'll do postponed ones # later). - next unless %dbline or $postponed_file{$file}; + next unless %dbline or $postponed_file{$file}; # In an eval. This is a little harder, so we'll # do more processing on that below. - (push @hard, $file), next - if $file =~ /^\(\w*eval/; - # XXX I have no idea what this is doing. Yet. - my @add; - @add = %{$postponed_file{$file}} - if $postponed_file{$file}; + ( push @hard, $file ), next + if $file =~ /^\(\w*eval/; + + # XXX I have no idea what this is doing. Yet. + my @add; + @add = %{ $postponed_file{$file} } + if $postponed_file{$file}; # Save the list of all the breakpoints for this file. - set_list("PERLDB_FILE_$_", %dbline, @add); - } ## end for (0 .. $#had_breakpoints) + set_list( "PERLDB_FILE_$_", %dbline, @add ); + } ## end for (0 .. $#had_breakpoints) # The breakpoint was inside an eval. This is a little # more difficult. XXX and I don't understand it. - for (@hard) { # Yes, really-really... + for (@hard) { # Get over to the eval in question. - *dbline = $main::{'_<' . $_}; - my ($quoted, $sub, %subs, $line) = quotemeta $_; - for $sub (keys %sub) { - next unless $sub{$sub} =~ /^$quoted:(\d+)-(\d+)$/; - $subs{$sub} = [$1, $2]; - } - unless (%subs) { - print $OUT - "No subroutines in $_, ignoring breakpoints.\n"; - next; - } - LINES: for $line (keys %dbline) { - - # One breakpoint per sub only: - my ($offset, $sub, $found); - SUBS: for $sub (keys %subs) { - if ( - $subs{$sub}->[1] >= $line # Not after the subroutine - and (not defined $offset # Not caught - or $offset < 0 )) { # or badly caught - $found = $sub; - $offset = $line - $subs{$sub}->[0]; - $offset = "+$offset", last SUBS if $offset >= 0; - } - } - if (defined $offset) { - $postponed{$found} = - "break $offset if $dbline{$line}"; - } else { - print $OUT "Breakpoint in $_:$line ignored: after all the subroutines.\n"; - } - + *dbline = $main::{ '_<' . $_ }; + my ( $quoted, $sub, %subs, $line ) = quotemeta $_; + for $sub ( keys %sub ) { + next unless $sub{$sub} =~ /^$quoted:(\d+)-(\d+)$/; + $subs{$sub} = [ $1, $2 ]; + } + unless (%subs) { + print $OUT + "No subroutines in $_, ignoring breakpoints.\n"; + next; + } + LINES: for $line ( keys %dbline ) { + + # One breakpoint per sub only: + my ( $offset, $sub, $found ); + SUBS: for $sub ( keys %subs ) { + if ( + $subs{$sub}->[1] >= + $line # Not after the subroutine + and ( + not defined $offset # Not caught + or $offset < 0 + ) + ) + { # or badly caught + $found = $sub; + $offset = $line - $subs{$sub}->[0]; + $offset = "+$offset", last SUBS + if $offset >= 0; + } ## end if ($subs{$sub}->[1] >=... + } ## end for $sub (keys %subs) + if ( defined $offset ) { + $postponed{$found} = + "break $offset if $dbline{$line}"; + } + else { + print $OUT +"Breakpoint in $_:$line ignored: after all the subroutines.\n"; + } } ## end for $line (keys %dbline) } ## end for (@hard) - # Save the other things that don't need to be + + # Save the other things that don't need to be # processed. - set_list("PERLDB_POSTPONE", %postponed); - set_list("PERLDB_PRETYPE", @$pretype); - set_list("PERLDB_PRE", @$pre); - set_list("PERLDB_POST", @$post); - set_list("PERLDB_TYPEAHEAD", @typeahead); + set_list( "PERLDB_POSTPONE", %postponed ); + set_list( "PERLDB_PRETYPE", @$pretype ); + set_list( "PERLDB_PRE", @$pre ); + set_list( "PERLDB_POST", @$post ); + set_list( "PERLDB_TYPEAHEAD", @typeahead ); # We are oficially restarting. - $ENV{PERLDB_RESTART} = 1; + $ENV{PERLDB_RESTART} = 1; # We are junking all child debuggers. - delete $ENV{PERLDB_PIDS}; # Restore ini state + delete $ENV{PERLDB_PIDS}; # Restore ini state # Set this back to the initial pid. - $ENV{PERLDB_PIDS} = $ini_pids if defined $ini_pids; + $ENV{PERLDB_PIDS} = $ini_pids if defined $ini_pids; =pod @@ -2807,15 +2886,16 @@ environment. =cut - # And run Perl again. Add the "-d" flag, all the + # And run Perl again. Add the "-d" flag, all the # flags we built up, the script (whether a one-liner # or a file), add on the -emacs flag for a slave editor, # and then the old arguments. We use exec() to keep the # PID stable (and that way $ini_pids is still valid). - exec($^X, '-d', @flags, @script, ($slave_editor ? '-emacs' : ()), @ARGS) || - print $OUT "exec failed: $!\n"; - last CMD; - }; + exec( $^X, '-d', @flags, @script, + ( $slave_editor ? '-emacs' : () ), @ARGS ) + || print $OUT "exec failed: $!\n"; + last CMD; + }; =head4 C - stack trace @@ -2823,10 +2903,10 @@ Just calls C. =cut - $cmd =~ /^T$/ && do { - print_trace($OUT, 1); # skip DB - next CMD; - }; + $cmd =~ /^T$/ && do { + print_trace( $OUT, 1 ); # skip DB + next CMD; + }; =head4 C - List window around current line. @@ -2834,7 +2914,7 @@ Just calls C. =cut - $cmd =~ /^w\b\s*(.*)/s && do { &cmd_w('w', $1); next CMD; }; + $cmd =~ /^w\b\s*(.*)/s && do { &cmd_w( 'w', $1 ); next CMD; }; =head4 C - watch-expression processing. @@ -2842,7 +2922,7 @@ Just calls C. =cut - $cmd =~ /^W\b\s*(.*)/s && do { &cmd_W('W', $1); next CMD; }; + $cmd =~ /^W\b\s*(.*)/s && do { &cmd_W( 'W', $1 ); next CMD; }; =head4 C - search forward for a string in the source @@ -2853,73 +2933,75 @@ mess us up. =cut - $cmd =~ /^\/(.*)$/ && do { + $cmd =~ /^\/(.*)$/ && do { # The pattern as a string. - $inpat = $1; + $inpat = $1; # Remove the final slash. - $inpat =~ s:([^\\])/$:$1:; + $inpat =~ s:([^\\])/$:$1:; # If the pattern isn't null ... - if ($inpat ne "") { + if ( $inpat ne "" ) { # Turn of warn and die procesing for a bit. - local $SIG{__DIE__}; - local $SIG{__WARN__}; + local $SIG{__DIE__}; + local $SIG{__WARN__}; # Create the pattern. - eval '$inpat =~ m'."\a$inpat\a"; - if ($@ ne "") { + eval '$inpat =~ m' . "\a$inpat\a"; + if ( $@ ne "" ) { + # Oops. Bad pattern. No biscuit. - # Print the eval error and go back for more + # Print the eval error and go back for more # commands. - print $OUT "$@"; - next CMD; - } - $pat = $inpat; - } ## end if ($inpat ne "") + print $OUT "$@"; + next CMD; + } + $pat = $inpat; + } ## end if ($inpat ne "") # Set up to stop on wrap-around. - $end = $start; + $end = $start; # Don't move off the current line. - $incr = -1; + $incr = -1; # Done in eval so nothing breaks if the pattern # does something weird. - eval ' - for (;;) { + eval ' + for (;;) { # Move ahead one line. - ++$start; + ++$start; # Wrap if we pass the last line. - $start = 1 if ($start > $max); + $start = 1 if ($start > $max); # Stop if we have gotten back to this line again, - last if ($start == $end); + last if ($start == $end); # A hit! (Note, though, that we are doing # case-insensitive matching. Maybe a qr// # expression would be better, so the user could # do case-sensitive matching if desired. - if ($dbline[$start] =~ m' . "\a$pat\a" . 'i) { - if ($slave_editor) { + if ($dbline[$start] =~ m' . "\a$pat\a" . 'i) { + if ($slave_editor) { # Handle proper escaping in the slave. - print $OUT "\032\032$filename:$start:0\n"; - } - else { + print $OUT "\032\032$filename:$start:0\n"; + } + else { # Just print the line normally. - print $OUT "$start:\t", $dbline[$start], "\n"; - } + print $OUT "$start:\t",$dbline[$start],"\n"; + } # And quit since we found something. - last; - } - } '; + last; + } + } '; + # If we wrapped, there never was a match. - print $OUT "/$pat/: not found\n" if ($start == $end); - next CMD; - }; + print $OUT "/$pat/: not found\n" if ( $start == $end ); + next CMD; + }; =head4 C - search backward for a string in the source @@ -2928,64 +3010,69 @@ Same as for C, except the loop runs backwards. =cut # ? - backward pattern search. - $cmd =~ /^\?(.*)$/ && do { + $cmd =~ /^\?(.*)$/ && do { # Get the pattern, remove trailing question mark. - $inpat = $1; - $inpat =~ s:([^\\])\?$:$1:; + $inpat = $1; + $inpat =~ s:([^\\])\?$:$1:; # If we've got one ... - if ($inpat ne "") { + if ( $inpat ne "" ) { # Turn off die & warn handlers. - local $SIG{__DIE__}; - local $SIG{__WARN__}; - eval '$inpat =~ m'."\a$inpat\a"; - if ($@ ne "") { + local $SIG{__DIE__}; + local $SIG{__WARN__}; + eval '$inpat =~ m' . "\a$inpat\a"; + + if ( $@ ne "" ) { + # Ouch. Not good. Print the error. - print $OUT $@; - next CMD; - } - $pat = $inpat; + print $OUT $@; + next CMD; + } + $pat = $inpat; } ## end if ($inpat ne "") + # Where we are now is where to stop after wraparound. - $end = $start; + $end = $start; # Don't move away from this line. - $incr = -1; + $incr = -1; # Search inside the eval to prevent pattern badness # from killing us. - - eval ' - for (;;) { + eval ' + for (;;) { # Back up a line. - --$start; + --$start; # Wrap if we pass the first line. - $start = $max if ($start <= 0); + + $start = $max if ($start <= 0); # Quit if we get back where we started, - last if ($start == $end); + last if ($start == $end); # Match? - if ($dbline[$start] =~ m' . "\a$pat\a" . 'i) { - if ($slave_editor) { + if ($dbline[$start] =~ m' . "\a$pat\a" . 'i) { + if ($slave_editor) { # Yep, follow slave editor requirements. - print $OUT "\032\032$filename:$start:0\n"; - } - else { + print $OUT "\032\032$filename:$start:0\n"; + } + else { # Yep, just print normally. - print $OUT "$start:\t", $dbline[$start], "\n"; - } + print $OUT "$start:\t",$dbline[$start],"\n"; + } # Found, so done. - last; - } - } '; - print $OUT "?$pat?: not found\n" if ($start == $end); - next CMD; - }; + last; + } + } '; + + # Say we failed if the loop never found anything, + print $OUT "?$pat?: not found\n" if ( $start == $end ); + next CMD; + }; =head4 C<$rc> - Recall command @@ -2995,26 +3082,26 @@ into C<$cmd>, and redoes the loop to execute it. =cut - # $rc - recall command. - $cmd =~ /^$rc+\s*(-)?(\d+)?$/ && do { + # $rc - recall command. + $cmd =~ /^$rc+\s*(-)?(\d+)?$/ && do { # No arguments, take one thing off history. - pop (@hist) if length($cmd) > 1; + pop(@hist) if length($cmd) > 1; - # Relative (- found)? + # Relative (- found)? # Y - index back from most recent (by 1 if bare minus) - # N - go to that particular command slot or the last + # N - go to that particular command slot or the last # thing if nothing following. - $i = $1 ? ($#hist-($2||1)) : ($2||$#hist); + $i = $1 ? ( $#hist - ( $2 || 1 ) ) : ( $2 || $#hist ); # Pick out the command desired. - $cmd = $hist[$i]; + $cmd = $hist[$i]; # Print the command to be executed and restart the loop # with that command in the buffer. - print $OUT $cmd, "\n"; - redo CMD; - }; + print $OUT $cmd, "\n"; + redo CMD; + }; =head4 C<$sh$sh> - C command @@ -3025,11 +3112,12 @@ C from getting messed up. # $sh$sh - run a shell command (if it's all ASCII). # Can't run shell commands with Unicode in the debugger, hmm. - $cmd =~ /^$sh$sh\s*([\x00-\xff]*)/ && do { + $cmd =~ /^$sh$sh\s*([\x00-\xff]*)/ && do { + # System it. - &system($1); - next CMD; - }; + &system($1); + next CMD; + }; =head4 C<$rc I $rc> - Search command history @@ -3038,31 +3126,34 @@ If a command is found, it is placed in C<$cmd> and executed via . =cut - # $rc pattern $rc - find a command in the history. - $cmd =~ /^$rc([^$rc].*)$/ && do { + # $rc pattern $rc - find a command in the history. + $cmd =~ /^$rc([^$rc].*)$/ && do { + # Create the pattern to use. - $pat = "^$1"; + $pat = "^$1"; # Toss off last entry if length is >1 (and it always is). - pop (@hist) if length($cmd) > 1; + pop(@hist) if length($cmd) > 1; # Look backward through the history. - for ($i = $#hist; $i; --$i) { + for ( $i = $#hist ; $i ; --$i ) { + # Stop if we find it. - last if $hist[$i] =~ /$pat/; - } + last if $hist[$i] =~ /$pat/; + } + + if ( !$i ) { - if (!$i) { # Never found it. - print $OUT "No such command!\n\n"; - next CMD; - } + print $OUT "No such command!\n\n"; + next CMD; + } # Found it. Put it in the buffer, print it, and process it. - $cmd = $hist[$i]; - print $OUT $cmd, "\n"; - redo CMD; - }; + $cmd = $hist[$i]; + print $OUT $cmd, "\n"; + redo CMD; + }; =head4 C<$sh> - Invoke a shell @@ -3071,12 +3162,13 @@ Uses C to invoke a shell. =cut # $sh - start a shell. - $cmd =~ /^$sh$/ && do { + $cmd =~ /^$sh$/ && do { + # Run the user's shell. If none defined, run Bourne. # We resume execution when the shell terminates. - &system($ENV{SHELL}||"/bin/sh"); - next CMD; - }; + &system( $ENV{SHELL} || "/bin/sh" ); + next CMD; + }; =head4 C<$sh I> - Force execution of a command in a shell @@ -3086,14 +3178,15 @@ C to avoid problems with C and C. =cut # $sh command - start a shell and run a command in it. - $cmd =~ /^$sh\s*([\x00-\xff]*)/ && do { - # XXX: using csh or tcsh destroys sigint retvals! - #&system($1); # use this instead + $cmd =~ /^$sh\s*([\x00-\xff]*)/ && do { + + # XXX: using csh or tcsh destroys sigint retvals! + #&system($1); # use this instead # use the user's shell, or Bourne if none defined. - &system($ENV{SHELL}||"/bin/sh","-c",$1); - next CMD; - }; + &system( $ENV{SHELL} || "/bin/sh", "-c", $1 ); + next CMD; + }; =head4 C - display commands in history @@ -3101,25 +3194,32 @@ Prints the contents of C<@hist> (if any). =cut - $cmd =~ /^H\b\s*(-(\d+))?/ && do { - # Anything other than negative numbers is ignored by + $cmd =~ /^H\b\s*\*/ && do { + @hist = @truehist = (); + print $OUT "History cleansed\n"; + next CMD; + }; + + $cmd =~ /^H\b\s*(-(\d+))?/ && do { + + # Anything other than negative numbers is ignored by # the (incorrect) pattern, so this test does nothing. - $end = $2 ? ($#hist-$2) : 0; + $end = $2 ? ( $#hist - $2 ) : 0; # Set to the minimum if less than zero. - $hist = 0 if $hist < 0; + $hist = 0 if $hist < 0; - # Start at the end of the array. + # Start at the end of the array. # Stay in while we're still above the ending value. # Tick back by one each time around the loop. - for ($i=$#hist; $i>$end; $i--) { + for ( $i = $#hist ; $i > $end ; $i-- ) { # Print the command unless it has no arguments. - print $OUT "$i: ",$hist[$i],"\n" - unless $hist[$i] =~ /^.?$/; - }; - next CMD; - }; + print $OUT "$i: ", $hist[$i], "\n" + unless $hist[$i] =~ /^.?$/; + } + next CMD; + }; =head4 C - look up documentation @@ -3127,11 +3227,11 @@ Just calls C to print the appropriate document. =cut - # man, perldoc, doc - show manual pages. - $cmd =~ /^(?:man|(?:perl)?doc)\b(?:\s+([^(]*))?$/ && do { - runman($1); - next CMD; - }; + # man, perldoc, doc - show manual pages. + $cmd =~ /^(?:man|(?:perl)?doc)\b(?:\s+([^(]*))?$/ && do { + runman($1); + next CMD; + }; =head4 C

- print @@ -3141,10 +3241,10 @@ the bottom of the loop. =cut # p - print (no args): print $_. - $cmd =~ s/^p$/print {\$DB::OUT} \$_/; + $cmd =~ s/^p$/print {\$DB::OUT} \$_/; # p - print the given expression. - $cmd =~ s/^p\b/print {\$DB::OUT} /; + $cmd =~ s/^p\b/print {\$DB::OUT} /; =head4 C<=> - define command alias @@ -3152,67 +3252,77 @@ Manipulates C<%alias> to add or list command aliases. =cut - # = - set up a command alias. - $cmd =~ s/^=\s*// && do { - my @keys; - if (length $cmd == 0) { + # = - set up a command alias. + $cmd =~ s/^=\s*// && do { + my @keys; + if ( length $cmd == 0 ) { + # No args, get current aliases. - @keys = sort keys %alias; - } elsif (my($k,$v) = ($cmd =~ /^(\S+)\s+(\S.*)/)) { + @keys = sort keys %alias; + } + elsif ( my ( $k, $v ) = ( $cmd =~ /^(\S+)\s+(\S.*)/ ) ) { + # Creating a new alias. $k is alias name, $v is # alias value. - # can't use $_ or kill //g state - for my $x ($k, $v) { - # Escape "alarm" characters. - $x =~ s/\a/\\a/g - } + # can't use $_ or kill //g state + for my $x ( $k, $v ) { + + # Escape "alarm" characters. + $x =~ s/\a/\\a/g; + } # Substitute key for value, using alarm chars - # as separators (which is why we escaped them in + # as separators (which is why we escaped them in # the command). - $alias{$k} = "s\a$k\a$v\a"; + $alias{$k} = "s\a$k\a$v\a"; # Turn off standard warn and die behavior. - local $SIG{__DIE__}; - local $SIG{__WARN__}; + local $SIG{__DIE__}; + local $SIG{__WARN__}; # Is it valid Perl? - unless (eval "sub { s\a$k\a$v\a }; 1") { + unless ( eval "sub { s\a$k\a$v\a }; 1" ) { + # Nope. Bad alias. Say so and get out. - print $OUT "Can't alias $k to $v: $@\n"; - delete $alias{$k}; - next CMD; - } + print $OUT "Can't alias $k to $v: $@\n"; + delete $alias{$k}; + next CMD; + } + # We'll only list the new one. - @keys = ($k); + @keys = ($k); } ## end elsif (my ($k, $v) = ($cmd... # The argument is the alias to list. - else { - @keys = ($cmd); - } + else { + @keys = ($cmd); + } # List aliases. - for my $k (@keys) { + for my $k (@keys) { + # Messy metaquoting: Trim the substiution code off. # We use control-G as the delimiter because it's not # likely to appear in the alias. - if ((my $v = $alias{$k}) =~ ss\a$k\a(.*)\a$1) { + if ( ( my $v = $alias{$k} ) =~ ss\a$k\a(.*)\a$1 ) { + # Print the alias. - print $OUT "$k\t= $1\n"; - } - elsif (defined $alias{$k}) { + print $OUT "$k\t= $1\n"; + } + elsif ( defined $alias{$k} ) { + # Couldn't trim it off; just print the alias code. - print $OUT "$k\t$alias{$k}\n"; - } - else { + print $OUT "$k\t$alias{$k}\n"; + } + else { + # No such, dude. - print "No alias for $k\n"; - } + print "No alias for $k\n"; + } } ## end for my $k (@keys) - next CMD; - }; + next CMD; + }; =head4 C - read commands from a file. @@ -3221,18 +3331,20 @@ pick it up. =cut - # source - read commands from a file (or pipe!) and execute. - $cmd =~ /^source\s+(.*\S)/ && do { - if (open my $fh, $1) { + # source - read commands from a file (or pipe!) and execute. + $cmd =~ /^source\s+(.*\S)/ && do { + if ( open my $fh, $1 ) { + # Opened OK; stick it in the list of file handles. - push @cmdfhs, $fh; - } - else { - # Couldn't open it. - &warn("Can't execute `$1': $!\n"); - } - next CMD; - }; + push @cmdfhs, $fh; + } + else { + + # Couldn't open it. + &warn("Can't execute `$1': $!\n"); + } + next CMD; + }; =head4 C - send current history to a file @@ -3245,13 +3357,17 @@ Note that all C<^(save|source)>'s are commented out with a view to minimise recu # save source - write commands to a file for later use $cmd =~ /^save\s*(.*)$/ && do { - my $file = $1 || '.perl5dbrc'; # default? - if (open my $fh, "> $file") { - # chomp to remove extraneous newlines from source'd files - chomp(my @truelist = map { m/^\s*(save|source)/ ? "#$_": $_ } @truehist); - print $fh join("\n", @truelist); + my $file = $1 || '.perl5dbrc'; # default? + if ( open my $fh, "> $file" ) { + + # chomp to remove extraneous newlines from source'd files + chomp( my @truelist = + map { m/^\s*(save|source)/ ? "#$_" : $_ } + @truehist ); + print $fh join( "\n", @truelist ); print "commands saved in $file\n"; - } else { + } + else { &warn("Can't save debugger commands in '$1': $!\n"); } next CMD; @@ -3272,57 +3388,62 @@ reading another. =cut # || - run command in the pager, with output to DB::OUT. - $cmd =~ /^\|\|?\s*[^|]/ && do { - if ($pager =~ /^\|/) { + $cmd =~ /^\|\|?\s*[^|]/ && do { + if ( $pager =~ /^\|/ ) { + # Default pager is into a pipe. Redirect I/O. - open(SAVEOUT,">&STDOUT") || - &warn("Can't save STDOUT"); - open(STDOUT,">&OUT") || - &warn("Can't redirect STDOUT"); + open( SAVEOUT, ">&STDOUT" ) + || &warn("Can't save STDOUT"); + open( STDOUT, ">&OUT" ) + || &warn("Can't redirect STDOUT"); } ## end if ($pager =~ /^\|/) - else { + else { + # Not into a pipe. STDOUT is safe. - open(SAVEOUT,">&OUT") || &warn("Can't save DB::OUT"); - } + open( SAVEOUT, ">&OUT" ) || &warn("Can't save DB::OUT"); + } # Fix up environment to record we have less if so. - fix_less(); + fix_less(); + + unless ( $piped = open( OUT, $pager ) ) { - unless ($piped=open(OUT,$pager)) { # Couldn't open pipe to pager. - &warn("Can't pipe output to `$pager'"); - if ($pager =~ /^\|/) { + &warn("Can't pipe output to `$pager'"); + if ( $pager =~ /^\|/ ) { + # Redirect I/O back again. - open(OUT,">&STDOUT") # XXX: lost message - || &warn("Can't restore DB::OUT"); - open(STDOUT,">&SAVEOUT") - || &warn("Can't restore STDOUT"); - close(SAVEOUT); + open( OUT, ">&STDOUT" ) # XXX: lost message + || &warn("Can't restore DB::OUT"); + open( STDOUT, ">&SAVEOUT" ) + || &warn("Can't restore STDOUT"); + close(SAVEOUT); } ## end if ($pager =~ /^\|/) - else { + else { + # Redirect I/O. STDOUT already safe. - open(OUT,">&STDOUT") # XXX: lost message - || &warn("Can't restore DB::OUT"); - } - next CMD; + open( OUT, ">&STDOUT" ) # XXX: lost message + || &warn("Can't restore DB::OUT"); + } + next CMD; } ## end unless ($piped = open(OUT,... # Set up broken-pipe handler if necessary. - $SIG{PIPE}= \&DB::catch - if $pager =~ /^\|/ && - ("" eq $SIG{PIPE} || "DEFAULT" eq $SIG{PIPE}); + $SIG{PIPE} = \&DB::catch + if $pager =~ /^\|/ + && ( "" eq $SIG{PIPE} || "DEFAULT" eq $SIG{PIPE} ); # Save current filehandle, unbuffer out, and put it back. - $selected= select(OUT); - $|= 1; + $selected = select(OUT); + $| = 1; # Don't put it back if pager was a pipe. - select( $selected ), $selected= "" unless $cmd =~ /^\|\|/; + select($selected), $selected = "" unless $cmd =~ /^\|\|/; # Trim off the pipe symbols and run the command now. - $cmd =~ s/^\|+\s*//; - redo PIPE; - }; + $cmd =~ s/^\|+\s*//; + redo PIPE; + }; =head3 END OF COMMAND PARSING @@ -3333,35 +3454,37 @@ any variables we might want to address in the C package. =cut # t - turn trace on. - $cmd =~ s/^t\s/\$DB::trace |= 1;\n/; + $cmd =~ s/^t\s/\$DB::trace |= 1;\n/; # s - single-step. Remember the last command was 's'. - $cmd =~ s/^s\s/\$DB::single = 1;\n/ && do {$laststep = 's'}; + $cmd =~ s/^s\s/\$DB::single = 1;\n/ && do { $laststep = 's' }; # n - single-step, but not into subs. Remember last command - $cmd =~ s/^n\s/\$DB::single = 2;\n/ && do {$laststep = 'n'}; + # was 'n'. + $cmd =~ s/^n\s/\$DB::single = 2;\n/ && do { $laststep = 'n' }; - } # PIPE: + } # PIPE: - # Make sure the flag that says "the debugger's running" is + # Make sure the flag that says "the debugger's running" is # still on, to make sure we get control again. - $evalarg = "\$^D = \$^D | \$DB::db_stop;\n$cmd"; + $evalarg = "\$^D = \$^D | \$DB::db_stop;\n$cmd"; # Run *our* eval that executes in the caller's context. - &eval; + &eval; # Turn off the one-time-dump stuff now. - if ($onetimeDump) { - $onetimeDump = undef; + if ($onetimeDump) { + $onetimeDump = undef; $onetimedumpDepth = undef; - } - elsif ($term_pid == $$) { - STDOUT->flush(); - STDERR->flush(); + } + elsif ( $term_pid == $$ ) { + STDOUT->flush(); + STDERR->flush(); + # XXX If this is the master pid, print a newline. - print $OUT "\n"; - } - } ## end while (($term || &setterm... + print $OUT "\n"; + } + } ## end while (($term || &setterm... =head3 POST-COMMAND PROCESSING @@ -3371,61 +3494,64 @@ our standard filehandles for input and output. =cut - continue { # CMD: + continue { # CMD: # At the end of every command: - if ($piped) { + if ($piped) { + # Unhook the pipe mechanism now. - if ($pager =~ /^\|/) { + if ( $pager =~ /^\|/ ) { + # No error from the child. - $? = 0; + $? = 0; - # we cannot warn here: the handle is missing --tchrist - close(OUT) || print SAVEOUT "\nCan't close DB::OUT\n"; + # we cannot warn here: the handle is missing --tchrist + close(OUT) || print SAVEOUT "\nCan't close DB::OUT\n"; - # most of the $? crud was coping with broken cshisms + # most of the $? crud was coping with broken cshisms # $? is explicitly set to 0, so this never runs. - if ($?) { - print SAVEOUT "Pager `$pager' failed: "; - if ($? == -1) { - print SAVEOUT "shell returned -1\n"; - } - elsif ($? >> 8) { - print SAVEOUT ( $? & 127 ) - ? " (SIG#".($?&127).")" - : "", ( $? & 128 ) ? " -- core dumped" : "", "\n"; - } - else { - print SAVEOUT "status ", ($? >> 8), "\n"; - } + if ($?) { + print SAVEOUT "Pager `$pager' failed: "; + if ( $? == -1 ) { + print SAVEOUT "shell returned -1\n"; + } + elsif ( $? >> 8 ) { + print SAVEOUT ( $? & 127 ) + ? " (SIG#" . ( $? & 127 ) . ")" + : "", ( $? & 128 ) ? " -- core dumped" : "", "\n"; + } + else { + print SAVEOUT "status ", ( $? >> 8 ), "\n"; + } } ## end if ($?) - # Reopen filehandle for our output (if we can) and + # Reopen filehandle for our output (if we can) and # restore STDOUT (if we can). - open(OUT,">&STDOUT") || &warn("Can't restore DB::OUT"); - open(STDOUT,">&SAVEOUT") || - &warn("Can't restore STDOUT"); + open( OUT, ">&STDOUT" ) || &warn("Can't restore DB::OUT"); + open( STDOUT, ">&SAVEOUT" ) + || &warn("Can't restore STDOUT"); # Turn off pipe exception handler if necessary. - $SIG{PIPE} = "DEFAULT" if $SIG{PIPE} eq \&DB::catch; + $SIG{PIPE} = "DEFAULT" if $SIG{PIPE} eq \&DB::catch; - # Will stop ignoring SIGPIPE if done like nohup(1) - # does SIGINT but Perl doesn't give us a choice. + # Will stop ignoring SIGPIPE if done like nohup(1) + # does SIGINT but Perl doesn't give us a choice. } ## end if ($pager =~ /^\|/) - else { + else { + # Non-piped "pager". Just restore STDOUT. - open(OUT,">&SAVEOUT") || &warn("Can't restore DB::OUT"); - } + open( OUT, ">&SAVEOUT" ) || &warn("Can't restore DB::OUT"); + } # Close filehandle pager was using, restore the normal one # if necessary, close(SAVEOUT); - select($selected), $selected= "" unless $selected eq ""; + select($selected), $selected = "" unless $selected eq ""; # No pipes now. - $piped= ""; + $piped = ""; } ## end if ($piped) - } # CMD: + } # CMD: =head3 COMMAND LOOP TERMINATION @@ -3439,16 +3565,16 @@ again. =cut # No more commands? Quit. - $fall_off_end = 1 unless defined $cmd; # Emulate `q' on EOF + $fall_off_end = 1 unless defined $cmd; # Emulate `q' on EOF # Evaluate post-prompt commands. - foreach $evalarg (@$post) { - &eval; - } - } # if ($single || $signal) + foreach $evalarg (@$post) { + &eval; + } + } # if ($single || $signal) # Put the user's globals back where you found them. - ($@, $!, $^E, $,, $/, $\, $^W) = @saved; + ( $@, $!, $^E, $,, $/, $\, $^W ) = @saved; (); } ## end sub DB @@ -3535,25 +3661,24 @@ arguments with which the subroutine was invoked =cut - sub sub { # Whether or not the autoloader was running, a scalar to put the # sub's return value in (if needed), and an array to put the sub's # return value in (if needed). - my ($al, $ret, @ret) = ""; + my ( $al, $ret, @ret ) = ""; # If the last ten characters are C'::AUTOLOAD', note we've traced # into AUTOLOAD for $sub. - if (length($sub) > 10 && substr($sub, -10, 10) eq '::AUTOLOAD') { - $al = " for $$sub"; + if ( length($sub) > 10 && substr( $sub, -10, 10 ) eq '::AUTOLOAD' ) { + $al = " for $$sub"; } # We stack the stack pointer and then increment it to protect us # from a situation that might unwind a whole bunch of call frames # at once. Localizing the stack pointer means that it will automatically # unwind the same amount when multiple stack frames are unwound. - local $stack_depth = $stack_depth + 1; # Protect from non-local exits + local $stack_depth = $stack_depth + 1; # Protect from non-local exits # Expand @stack. $#stack = $stack_depth; @@ -3561,7 +3686,7 @@ sub sub { # Save current single-step setting. $stack[-1] = $single; - # Turn off all flags except single-stepping. + # Turn off all flags except single-stepping. $single &= 1; # If we've gotten really deeply recursed, turn on the flag that will @@ -3571,128 +3696,137 @@ sub sub { # If frame messages are on ... ( $frame & 4 # Extended frame entry message - ? ( print_lineinfo(' ' x ($stack_depth - 1), "in "), + ? ( + print_lineinfo( ' ' x ( $stack_depth - 1 ), "in " ), - # Why -1? But it works! :-( + # Why -1? But it works! :-( # Because print_trace will call add 1 to it and then call # dump_trace; this results in our skipping -1+1 = 0 stack frames # in dump_trace. - print_trace($LINEINFO, -1, 1, 1, "$sub$al") - ) - : print_lineinfo(' ' x ($stack_depth - 1), "entering $sub$al\n") + print_trace( $LINEINFO, -1, 1, 1, "$sub$al" ) + ) + : print_lineinfo( ' ' x ( $stack_depth - 1 ), "entering $sub$al\n" ) + # standard frame entry message - ) - if $frame; + ) + if $frame; # Determine the sub's return type,and capture approppriately. if (wantarray) { + # Called in array context. call sub and capture output. # DB::DB will recursively get control again if appropriate; we'll come # back here when the sub is finished. if ($assertion) { - $assertion=0; - eval { + $assertion = 0; + eval { @ret = &$sub; }; + if ($@) { + print $OUT $@; + $signal = 1 unless $warnassertions; + } + } + else { @ret = &$sub; - }; - if ($@) { - print $OUT $@; - $signal=1 unless $warnassertions; } - } - else { - @ret = &$sub; - } # Pop the single-step value back off the stack. - $single |= $stack[$stack_depth--]; + $single |= $stack[ $stack_depth-- ]; # Check for exit trace messages... - ( - $frame & 4 # Extended exit message - ? ( print_lineinfo(' ' x $stack_depth, "out "), - print_trace($LINEINFO, -1, 1, 1, "$sub$al") - ) - : print_lineinfo(' ' x $stack_depth, "exited $sub$al\n") + ( + $frame & 4 # Extended exit message + ? ( + print_lineinfo( ' ' x $stack_depth, "out " ), + print_trace( $LINEINFO, -1, 1, 1, "$sub$al" ) + ) + : print_lineinfo( ' ' x $stack_depth, "exited $sub$al\n" ) + # Standard exit message - ) - if $frame & 2; + ) + if $frame & 2; # Print the return info if we need to. - if ($doret eq $stack_depth or $frame & 16) { + if ( $doret eq $stack_depth or $frame & 16 ) { + # Turn off output record separator. - local $\ = ''; - my $fh = ($doret eq $stack_depth ? $OUT : $LINEINFO); + local $\ = ''; + my $fh = ( $doret eq $stack_depth ? $OUT : $LINEINFO ); # Indent if we're printing because of $frame tracing. - print $fh ' ' x $stack_depth if $frame & 16; + print $fh ' ' x $stack_depth if $frame & 16; # Print the return value. - print $fh "list context return from $sub:\n"; - dumpit($fh, \@ret ); + print $fh "list context return from $sub:\n"; + dumpit( $fh, \@ret ); # And don't print it again. - $doret = -2; + $doret = -2; } ## end if ($doret eq $stack_depth... - # And we have to return the return value now. - @ret; + # And we have to return the return value now. + @ret; } ## end if (wantarray) # Scalar context. else { if ($assertion) { - $assertion=0; - eval { - # Save the value if it's wanted at all. - $ret = &$sub; - }; - if ($@) { - print $OUT $@; - $signal=1 unless $warnassertions; + $assertion = 0; + eval { + + # Save the value if it's wanted at all. + $ret = &$sub; + }; + if ($@) { + print $OUT $@; + $signal = 1 unless $warnassertions; + } + $ret = undef unless defined wantarray; } - $ret=undef unless defined wantarray; - } - else { - if (defined wantarray) { - # Save the value if it's wanted at all. - $ret = &$sub; - } else { - # Void return, explicitly. - &$sub; - undef $ret; - } - } # if assertion + if ( defined wantarray ) { + + # Save the value if it's wanted at all. + $ret = &$sub; + } + else { + + # Void return, explicitly. + &$sub; + undef $ret; + } + } # if assertion # Pop the single-step value off the stack. - $single |= $stack[$stack_depth--]; + $single |= $stack[ $stack_depth-- ]; # If we're doing exit messages... - ( - $frame & 4 # Extended messsages - ? ( - print_lineinfo(' ' x $stack_depth, "out "), - print_trace($LINEINFO, -1, 1, 1, "$sub$al") - ) - : print_lineinfo(' ' x $stack_depth, "exited $sub$al\n") - # Standard messages - ) - if $frame & 2; + ( + $frame & 4 # Extended messsages + ? ( + print_lineinfo( ' ' x $stack_depth, "out " ), + print_trace( $LINEINFO, -1, 1, 1, "$sub$al" ) + ) + : print_lineinfo( ' ' x $stack_depth, "exited $sub$al\n" ) + + # Standard messages + ) + if $frame & 2; # If we are supposed to show the return value... same as before. - if ($doret eq $stack_depth or $frame & 16 and defined wantarray) { - local $\ = ''; - my $fh = ($doret eq $stack_depth ? $OUT : $LINEINFO); - print $fh (' ' x $stack_depth) if $frame & 16; - print $fh (defined wantarray - ? "scalar context return from $sub: " - : "void context return from $sub\n" - ); - dumpit( $fh, $ret ) if defined wantarray; - $doret = -2; + if ( $doret eq $stack_depth or $frame & 16 and defined wantarray ) { + local $\ = ''; + my $fh = ( $doret eq $stack_depth ? $OUT : $LINEINFO ); + print $fh ( ' ' x $stack_depth ) if $frame & 16; + print $fh ( + defined wantarray + ? "scalar context return from $sub: " + : "void context return from $sub\n" + ); + dumpit( $fh, $ret ) if defined wantarray; + $doret = -2; } ## end if ($doret eq $stack_depth... # Return the appropriate scalar value. - $ret; + $ret; } ## end else [ if (wantarray) } ## end sub sub @@ -3728,35 +3862,29 @@ Note that trying to set the CommandSet to 'foobar' simply results in the ### The API section -### Functions with multiple modes of failure die on error, the rest -### returns FALSE on error. -### User-interface functions cmd_* output error message. - -### Note all cmd_[a-zA-Z]'s require $cmd, $line, $dblineno as first arguments - -my %set = ( # - 'pre580' => { - 'a' => 'pre580_a', - 'A' => 'pre580_null', - 'b' => 'pre580_b', - 'B' => 'pre580_null', - 'd' => 'pre580_null', - 'D' => 'pre580_D', - 'h' => 'pre580_h', - 'M' => 'pre580_null', - 'O' => 'o', - 'o' => 'pre580_null', - 'v' => 'M', - 'w' => 'v', - 'W' => 'pre580_W', +my %set = ( # + 'pre580' => { + 'a' => 'pre580_a', + 'A' => 'pre580_null', + 'b' => 'pre580_b', + 'B' => 'pre580_null', + 'd' => 'pre580_null', + 'D' => 'pre580_D', + 'h' => 'pre580_h', + 'M' => 'pre580_null', + 'O' => 'o', + 'o' => 'pre580_null', + 'v' => 'M', + 'w' => 'v', + 'W' => 'pre580_W', }, - 'pre590' => { - '<' => 'pre590_prepost', - '<<' => 'pre590_prepost', - '>' => 'pre590_prepost', - '>>' => 'pre590_prepost', - '{' => 'pre590_prepost', - '{{' => 'pre590_prepost', + 'pre590' => { + '<' => 'pre590_prepost', + '<<' => 'pre590_prepost', + '>' => 'pre590_prepost', + '>>' => 'pre590_prepost', + '{' => 'pre590_prepost', + '{{' => 'pre590_prepost', }, ); @@ -3780,17 +3908,16 @@ sub cmd_wrapper { my $line = shift; my $dblineno = shift; - # Assemble the command subroutine's name by looking up the + # Assemble the command subroutine's name by looking up the # command set and command name in %set. If we can't find it, # default to the older version of the command. my $call = 'cmd_' - .( $set{$CommandSet}{$cmd} - || ($cmd =~ /^[<>{]+/o ? 'prepost' : $cmd)); - + . ( $set{$CommandSet}{$cmd} + || ( $cmd =~ /^[<>{]+/o ? 'prepost' : $cmd ) ); # Call the command subroutine, call it by name. - return &$call($cmd, $line, $dblineno); -} + return &$call( $cmd, $line, $dblineno ); +} ## end sub cmd_wrapper =head3 C (command) @@ -3801,25 +3928,27 @@ line if none is specified. =cut sub cmd_a { - my $cmd = shift; - my $line = shift || ''; # [.|line] expr - my $dbline = shift; + my $cmd = shift; + my $line = shift || ''; # [.|line] expr + my $dbline = shift; # If it's dot (here), or not all digits, use the current line. $line =~ s/^(\.|(?:[^\d]))/$dbline/; - # Should be a line number followed by an expression. - if ($line =~ /^\s*(\d*)\s*(\S.+)/) { - my ($lineno, $expr) = ($1, $2); + # Should be a line number followed by an expression. + if ( $line =~ /^\s*(\d*)\s*(\S.+)/ ) { + my ( $lineno, $expr ) = ( $1, $2 ); # If we have an expression ... - if (length $expr) { + if ( length $expr ) { + # ... but the line isn't breakable, complain. - if ($dbline[$lineno] == 0) { - print $OUT - "Line $lineno($dbline[$lineno]) does not have an action?\n"; - } + if ( $dbline[$lineno] == 0 ) { + print $OUT + "Line $lineno($dbline[$lineno]) does not have an action?\n"; + } else { + # It's executable. Record that the line has an action. $had_breakpoints{$filename} |= 2; @@ -3832,10 +3961,11 @@ sub cmd_a { } ## end if (length $expr) } ## end if ($line =~ /^\s*(\d*)\s*(\S.+)/) else { + # Syntax wrong. - print $OUT - "Adding an action requires an optional lineno and an expression\n" - ; # hint + print $OUT + "Adding an action requires an optional lineno and an expression\n" + ; # hint } } ## end sub cmd_a @@ -3847,9 +3977,9 @@ subroutine, C. =cut sub cmd_A { - my $cmd = shift; # A + my $cmd = shift; my $line = shift || ''; - my $dbline = shift; + my $dbline = shift; # Dot is this line. $line =~ s/^\./$dbline/; @@ -3858,21 +3988,20 @@ sub cmd_A { # The '1' forces the eval to be true. It'll be false only # if delete_action blows up for some reason, in which case # we print $@ and get out. - if ($line eq '*') { + if ( $line eq '*' ) { eval { &delete_action(); 1 } or print $OUT $@ and return; - } - + } + # There's a real line number. Pass it to delete_action. # Error trapping is as above. - elsif ($line =~ /^(\S.*)/) { + elsif ( $line =~ /^(\S.*)/ ) { eval { &delete_action($1); 1 } or print $OUT $@ and return; - } + } # Swing and a miss. Bad syntax. else { - print $OUT - "Deleting an action requires a line number, or '*' for all\n" - ; # hint + print $OUT + "Deleting an action requires a line number, or '*' for all\n" ; # hint } } ## end sub cmd_A @@ -3886,28 +4015,29 @@ will get any kind of an action, including breakpoints). =cut sub delete_action { - my $i = shift; - if (defined($i)) { + my $i = shift; + if ( defined($i) ) { + # Can there be one? die "Line $i has no action .\n" if $dbline[$i] == 0; # Nuke whatever's there. - $dbline{$i} =~ s/\0[^\0]*//; # \^a + $dbline{$i} =~ s/\0[^\0]*//; # \^a delete $dbline{$i} if $dbline{$i} eq ''; - } - else { + } + else { print $OUT "Deleting all actions...\n"; - for my $file (keys %had_breakpoints) { - local *dbline = $main::{'_<' . $file}; + for my $file ( keys %had_breakpoints ) { + local *dbline = $main::{ '_<' . $file }; my $max = $#dbline; my $was; - for ($i = 1; $i <= $max ; $i++) { - if (defined $dbline{$i}) { - $dbline{$i} =~ s/\0[^\0]*//; - delete $dbline{$i} if $dbline{$i} eq ''; - } - unless ($had_breakpoints{$file} &= ~2) { - delete $had_breakpoints{$file}; + for ( $i = 1 ; $i <= $max ; $i++ ) { + if ( defined $dbline{$i} ) { + $dbline{$i} =~ s/\0[^\0]*//; + delete $dbline{$i} if $dbline{$i} eq ''; + } + unless ( $had_breakpoints{$file} &= ~2 ) { + delete $had_breakpoints{$file}; } } ## end for ($i = 1 ; $i <= $max... } ## end for my $file (keys %had_breakpoints) @@ -3925,35 +4055,36 @@ place. =cut sub cmd_b { - my $cmd = shift; # b - my $line = shift; # [.|line] [cond] - my $dbline = shift; + my $cmd = shift; + my $line = shift; # [.|line] [cond] + my $dbline = shift; # Make . the current line number if it's there.. $line =~ s/^\./$dbline/; - # No line number, no condition. Simple break on current line. - if ($line =~ /^\s*$/) { - &cmd_b_line($dbline, 1); - } + # No line number, no condition. Simple break on current line. + if ( $line =~ /^\s*$/ ) { + &cmd_b_line( $dbline, 1 ); + } # Break on load for a file. - elsif ($line =~ /^load\b\s*(.*)/) { - my $file = $1; + elsif ( $line =~ /^load\b\s*(.*)/ ) { + my $file = $1; $file =~ s/\s+$//; &cmd_b_load($file); - } + } # b compile|postpone [] - # The interpreter actually traps this one for us; we just put the + # The interpreter actually traps this one for us; we just put the # necessary condition in the %postponed hash. - elsif ($line =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/) { + elsif ( $line =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/ ) { + # Capture the condition if there is one. Make it true if none. my $cond = length $3 ? $3 : '1'; # Save the sub name and set $break to 1 if $1 was 'postpone', 0 # if it was 'compile'. - my ($subname, $break) = ($2, $1 eq 'postpone'); + my ( $subname, $break ) = ( $2, $1 eq 'postpone' ); # De-Perl4-ify the name - ' separators to ::. $subname =~ s/\'/::/g; @@ -3962,22 +4093,24 @@ sub cmd_b { $subname = "${'package'}::" . $subname unless $subname =~ /::/; # Add main if it starts with ::. - $subname = "main".$subname if substr($subname,0,2) eq "::"; + $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::"; # Save the break type for this sub. $postponed{$subname} = $break ? "break +0 if $cond" : "compile"; } ## end elsif ($line =~ ... # b [] - elsif ($line =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/) { + elsif ( $line =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/ ) { + # $subname = $1; $cond = length $2 ? $2 : '1'; - &cmd_b_sub($subname, $cond); - } + &cmd_b_sub( $subname, $cond ); + } # b []. - elsif ($line =~ /^(\d*)\s*(.*)/) { + elsif ( $line =~ /^(\d*)\s*(.*)/ ) { + # Capture the line. If none, it's the current line. $line = $1 || $dbline; @@ -3985,8 +4118,8 @@ sub cmd_b { $cond = length $2 ? $2 : '1'; # Break on line. - &cmd_b_line($line, $cond); - } + &cmd_b_line( $line, $cond ); + } # Line didn't make sense. else { @@ -4002,12 +4135,10 @@ C<%had_breakpoints>. =cut - - sub break_on_load { - my $file = shift; - $break_on_load{$file} = 1; - $had_breakpoints{$file} |= 1; + my $file = shift; + $break_on_load{$file} = 1; + $had_breakpoints{$file} |= 1; } =head3 C (API) @@ -4019,7 +4150,7 @@ suffices. =cut sub report_break_on_load { - sort keys %break_on_load; + sort keys %break_on_load; } =head3 C (command) @@ -4031,32 +4162,33 @@ C and then report that it was done. =cut sub cmd_b_load { - my $file = shift; - my @files; + my $file = shift; + my @files; # This is a block because that way we can use a redo inside it # even without there being any looping structure at all outside it. - { + { + # Save short name and full path if found. - push @files, $file; - push @files, $::INC{$file} if $::INC{$file}; + push @files, $file; + push @files, $::INC{$file} if $::INC{$file}; - # Tack on .pm and do it again unless there was a '.' in the name + # Tack on .pm and do it again unless there was a '.' in the name # already. - $file .= '.pm', redo unless $file =~ /\./; - } + $file .= '.pm', redo unless $file =~ /\./; + } # Do the real work here. - break_on_load($_) for @files; + break_on_load($_) for @files; # All the files that have break-on-load breakpoints. - @files = report_break_on_load; + @files = report_break_on_load; # Normalize for the purposes of our printing this. - local $\ = ''; - local $" = ' '; - print $OUT "Will stop on load of `@files'.\n"; -} + local $\ = ''; + local $" = ' '; + print $OUT "Will stop on load of `@files'.\n"; +} ## end sub cmd_b_load =head3 C<$filename_error> (API package global) @@ -4111,71 +4243,71 @@ first line I C<$to> that's breakable, if there is one. sub breakable_line { - my ($from, $to) = @_; + my ( $from, $to ) = @_; # $i is the start point. (Where are the FORTRAN programs of yesteryear?) - my $i = $from; + my $i = $from; # If there are at least 2 arguments, we're trying to search a range. - if (@_ >= 2) { + if ( @_ >= 2 ) { # $delta is positive for a forward search, negative for a backward one. - my $delta = $from < $to ? +1 : -1; + my $delta = $from < $to ? +1 : -1; # Keep us from running off the ends of the file. - my $limit = $delta > 0 ? $#dbline : 1; + my $limit = $delta > 0 ? $#dbline : 1; # Clever test. If you're a mathematician, it's obvious why this # test works. If not: # If $delta is positive (going forward), $limit will be $#dbline. # If $to is less than $limit, ($limit - $to) will be positive, times # $delta of 1 (positive), so the result is > 0 and we should use $to - # as the stopping point. + # as the stopping point. # # If $to is greater than $limit, ($limit - $to) is negative, - # times $delta of 1 (positive), so the result is < 0 and we should + # times $delta of 1 (positive), so the result is < 0 and we should # use $limit ($#dbline) as the stopping point. # - # If $delta is negative (going backward), $limit will be 1. + # If $delta is negative (going backward), $limit will be 1. # If $to is zero, ($limit - $to) will be 1, times $delta of -1 # (negative) so the result is > 0, and we use $to as the stopping # point. # # If $to is less than zero, ($limit - $to) will be positive, - # times $delta of -1 (negative), so the result is not > 0, and - # we use $limit (1) as the stopping point. + # times $delta of -1 (negative), so the result is not > 0, and + # we use $limit (1) as the stopping point. # # If $to is 1, ($limit - $to) will zero, times $delta of -1 - # (negative), still giving zero; the result is not > 0, and + # (negative), still giving zero; the result is not > 0, and # we use $limit (1) as the stopping point. # # if $to is >1, ($limit - $to) will be negative, times $delta of -1 # (negative), giving a positive (>0) value, so we'll set $limit to # $to. - - $limit = $to if ($limit - $to) * $delta > 0; + + $limit = $to if ( $limit - $to ) * $delta > 0; # The real search loop. # $i starts at $from (the point we want to start searching from). # We move through @dbline in the appropriate direction (determined - # by $delta: either -1 (back) or +1 (ahead). - # We stay in as long as we haven't hit an executable line + # by $delta: either -1 (back) or +1 (ahead). + # We stay in as long as we haven't hit an executable line # ($dbline[$i] == 0 means not executable) and we haven't reached # the limit yet (test similar to the above). - $i += $delta while $dbline[$i] == 0 and ($limit - $i) * $delta > 0; + $i += $delta while $dbline[$i] == 0 and ( $limit - $i ) * $delta > 0; + } ## end if (@_ >= 2) # If $i points to a line that is executable, return that. - return $i unless $dbline[$i] == 0; + return $i unless $dbline[$i] == 0; # Format the message and print it: no breakable lines in range. - my ($pl, $upto) = ('', ''); - my ($pl, $upto) = ('', ''); - ($pl, $upto) = ('s', "..$to") if @_ >=2 and $from != $to; + my ( $pl, $upto ) = ( '', '' ); + ( $pl, $upto ) = ( 's', "..$to" ) if @_ >= 2 and $from != $to; # If there's a filename in filename_error, we'll see it. # If not, not. - die "Line$pl $from$upto$filename_error not breakable\n"; + die "Line$pl $from$upto$filename_error not breakable\n"; } ## end sub breakable_line =head3 breakable_line_in_filename($file, $from, $to) (API) @@ -4185,17 +4317,18 @@ Like C, but look in another file. =cut sub breakable_line_in_filename { + # Capture the file name. - my ($f) = shift; + my ($f) = shift; # Swap the magic line array over there temporarily. - local *dbline = $main::{'_<' . $f}; + local *dbline = $main::{ '_<' . $f }; # If there's an error, it's in this other file. - local $filename_error = " of `$f'"; + local $filename_error = " of `$f'"; # Find the breakable line. - breakable_line(@_); + breakable_line(@_); # *dbline and $filename_error get restored when this block ends. @@ -4209,30 +4342,32 @@ specified) to the specified line. Dies if it can't. =cut sub break_on_line { - my ($i, $cond) = @_; + my ( $i, $cond ) = @_; # Always true if no condition supplied. - $cond = 1 unless @_ >= 2; + $cond = 1 unless @_ >= 2; - my $inii = $i; - my $after = ''; - my $pl = ''; + my $inii = $i; + my $after = ''; + my $pl = ''; # Woops, not a breakable line. $filename_error allows us to say # if it was in a different file. - die "Line $i$filename_error not breakable.\n" if $dbline[$i] == 0; + die "Line $i$filename_error not breakable.\n" if $dbline[$i] == 0; # Mark this file as having breakpoints in it. - $had_breakpoints{$filename} |= 1; + $had_breakpoints{$filename} |= 1; + + # If there is an action or condition here already ... + if ( $dbline{$i} ) { - # If there is an action or condition here already ... - if ($dbline{$i}) { # ... swap this condition for the existing one. - $dbline{$i} =~ s/^[^\0]*/$cond/; + $dbline{$i} =~ s/^[^\0]*/$cond/; } - else { + else { + # Nothing here - just add the condition. - $dbline{$i} = $cond; + $dbline{$i} = $cond; } } ## end sub break_on_line @@ -4244,10 +4379,10 @@ doesn't work. =cut sub cmd_b_line { - eval { break_on_line(@_); 1 } or do { - local $\ = ''; - print $OUT $@ and return; - }; + eval { break_on_line(@_); 1 } or do { + local $\ = ''; + print $OUT $@ and return; + }; } ## end sub cmd_b_line =head3 break_on_filename_line(file, line, [condition]) (API) @@ -4258,20 +4393,20 @@ the breakpoint. =cut sub break_on_filename_line { - my ($f, $i, $cond) = @_; + my ( $f, $i, $cond ) = @_; # Always true if condition left off. - $cond = 1 unless @_ >= 3; + $cond = 1 unless @_ >= 3; # Switch the magical hash temporarily. - local *dbline = $main::{'_<' . $f}; + local *dbline = $main::{ '_<' . $f }; # Localize the variables that break_on_line uses to make its message. - local $filename_error = " of `$f'"; - local $filename = $f; + local $filename_error = " of `$f'"; + local $filename = $f; # Add the breakpoint. - break_on_line($i, $cond); + break_on_line( $i, $cond ); } ## end sub break_on_filename_line =head3 break_on_filename_line_range(file, from, to, [condition]) (API) @@ -4282,16 +4417,16 @@ executable one, and put a breakpoint on the first one you find. =cut sub break_on_filename_line_range { - my ($f, $from, $to, $cond) = @_; + my ( $f, $from, $to, $cond ) = @_; # Find a breakable line if there is one. - my $i = breakable_line_in_filename($f, $from, $to); + my $i = breakable_line_in_filename( $f, $from, $to ); - # Find a breakable line if there is one. - $cond = 1 unless @_ >= 3; + # Always true if missing. + $cond = 1 unless @_ >= 3; # Add the breakpoint. - break_on_filename_line($f,$i,$cond); + break_on_filename_line( $f, $i, $cond ); } ## end sub break_on_filename_line_range =head3 subroutine_filename_lines(subname, [condition]) (API) @@ -4302,12 +4437,12 @@ Uses C to locate the desired subroutine. =cut sub subroutine_filename_lines { - my ($subname,$cond) = @_; + my ( $subname, $cond ) = @_; # Returned value from find_sub() is fullpathname:startline-endline. # The match creates the list (fullpathname, start, end). Falling off # the end of the subroutine returns this implicitly. - find_sub($subname) =~ /^(.*):(\d+)-(\d+)$/; + find_sub($subname) =~ /^(.*):(\d+)-(\d+)$/; } ## end sub subroutine_filename_lines =head3 break_subroutine(subname) (API) @@ -4319,18 +4454,18 @@ C to place the break. =cut sub break_subroutine { - my $subname = shift; + my $subname = shift; # Get filename, start, and end. - my ($file,$s,$e) = subroutine_filename_lines($subname) - or die "Subroutine $subname not found.\n"; + my ( $file, $s, $e ) = subroutine_filename_lines($subname) + or die "Subroutine $subname not found.\n"; # Null condition changes to '1' (always true). - $cond = 1 unless @_ >= 2; + $cond = 1 unless @_ >= 2; # Put a break the first place possible in the range of lines # that make up this subroutine. - break_on_filename_line_range($file,$s,$e,@_); + break_on_filename_line_range( $file, $s, $e, @_ ); } ## end sub break_subroutine =head3 cmd_b_sub(subname, [condition]) (command) @@ -4355,40 +4490,41 @@ breakpoint. =cut sub cmd_b_sub { - my ($subname,$cond) = @_; + my ( $subname, $cond ) = @_; # Add always-true condition if we have none. - $cond = 1 unless @_ >= 2; + $cond = 1 unless @_ >= 2; - # If the subname isn't a code reference, qualify it so that + # If the subname isn't a code reference, qualify it so that # break_subroutine() will work right. - unless (ref $subname eq 'CODE') { + unless ( ref $subname eq 'CODE' ) { + # Not Perl4. - $subname =~ s/\'/::/g; - my $s = $subname; + $subname =~ s/\'/::/g; + my $s = $subname; # Put it in this package unless it's already qualified. - $subname = "${'package'}::" . $subname - unless $subname =~ /::/; + $subname = "${'package'}::" . $subname + unless $subname =~ /::/; # Requalify it into CORE::GLOBAL if qualifying it into this # package resulted in its not being defined, but only do so # if it really is in CORE::GLOBAL. - $subname = "CORE::GLOBAL::$s" - if not defined &$subname - and $s !~ /::/ - and defined &{"CORE::GLOBAL::$s"}; + $subname = "CORE::GLOBAL::$s" + if not defined &$subname + and $s !~ /::/ + and defined &{"CORE::GLOBAL::$s"}; # Put it in package 'main' if it has a leading ::. - $subname = "main".$subname if substr($subname,0,2) eq "::"; + $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::"; } ## end unless (ref $subname eq 'CODE') # Try to set the breakpoint. - eval { break_subroutine($subname,$cond); 1 } or do { - local $\ = ''; - print $OUT $@ and return; - } + eval { break_subroutine( $subname, $cond ); 1 } or do { + local $\ = ''; + print $OUT $@ and return; + } } ## end sub cmd_b_sub =head3 C - delete breakpoint(s) (command) @@ -4403,34 +4539,34 @@ thereby deleting all the breakpoints. =cut sub cmd_B { - my $cmd = shift; + my $cmd = shift; - # No line spec? Use dbline. + # No line spec? Use dbline. # If there is one, use it if it's non-zero, or wipe it out if it is. - my $line = ($_[0] =~ /^\./) ? $dbline : shift || ''; - my $dbline = shift; + my $line = ( $_[0] =~ /^\./ ) ? $dbline : shift || ''; + my $dbline = shift; # If the line was dot, make the line the current one. $line =~ s/^\./$dbline/; # If it's * we're deleting all the breakpoints. - if ($line eq '*') { + if ( $line eq '*' ) { eval { &delete_breakpoint(); 1 } or print $OUT $@ and return; - } + } # If there is a line spec, delete the breakpoint on that line. - elsif ($line =~ /^(\S.*)/) { - eval { &delete_breakpoint($line || $dbline); 1 } or do { - local $\ = ''; - print $OUT $@ and return; - }; + elsif ( $line =~ /^(\S.*)/ ) { + eval { &delete_breakpoint( $line || $dbline ); 1 } or do { + local $\ = ''; + print $OUT $@ and return; + }; } ## end elsif ($line =~ /^(\S.*)/) - # No line spec. + # No line spec. else { - print $OUT - "Deleting a breakpoint requires a line number, or '*' for all\n" - ; # hint + print $OUT + "Deleting a breakpoint requires a line number, or '*' for all\n" + ; # hint } } ## end sub cmd_B @@ -4460,60 +4596,64 @@ are no magical debugger structures associated with them. =cut sub delete_breakpoint { - my $i = shift; + my $i = shift; # If we got a line, delete just that one. - if (defined($i)) { + if ( defined($i) ) { # Woops. This line wasn't breakable at all. - die "Line $i not breakable.\n" if $dbline[$i] == 0; + die "Line $i not breakable.\n" if $dbline[$i] == 0; # Kill the condition, but leave any action. - $dbline{$i} =~ s/^[^\0]*//; + $dbline{$i} =~ s/^[^\0]*//; # Remove the entry entirely if there's no action left. - delete $dbline{$i} if $dbline{$i} eq ''; - } + delete $dbline{$i} if $dbline{$i} eq ''; + } # No line; delete them all. - else { - print $OUT "Deleting all breakpoints...\n"; + else { + print $OUT "Deleting all breakpoints...\n"; # %had_breakpoints lists every file that had at least one # breakpoint in it. - for my $file (keys %had_breakpoints) { + for my $file ( keys %had_breakpoints ) { + # Switch to the desired file temporarily. - local *dbline = $main::{'_<' . $file}; + local *dbline = $main::{ '_<' . $file }; - my $max = $#dbline; - my $was; + my $max = $#dbline; + my $was; # For all lines in this file ... - for ($i = 1; $i <= $max ; $i++) { + for ( $i = 1 ; $i <= $max ; $i++ ) { + # If there's a breakpoint or action on this line ... - if (defined $dbline{$i}) { + if ( defined $dbline{$i} ) { + # ... remove the breakpoint. - $dbline{$i} =~ s/^[^\0]+//; - if ($dbline{$i} =~ s/^\0?$//) { + $dbline{$i} =~ s/^[^\0]+//; + if ( $dbline{$i} =~ s/^\0?$// ) { + # Remove the entry altogether if no action is there. - delete $dbline{$i}; - } + delete $dbline{$i}; + } } ## end if (defined $dbline{$i... } ## end for ($i = 1 ; $i <= $max... # If, after we turn off the "there were breakpoints in this file" - # bit, the entry in %had_breakpoints for this file is zero, + # bit, the entry in %had_breakpoints for this file is zero, # we should remove this file from the hash. - if (not $had_breakpoints{$file} &= ~1) { - delete $had_breakpoints{$file}; - } + if ( not $had_breakpoints{$file} &= ~1 ) { + delete $had_breakpoints{$file}; + } } ## end for my $file (keys %had_breakpoints) # Kill off all the other breakpoints that are waiting for files that # haven't been loaded yet. - undef %postponed; - undef %postponed_file; - undef %break_on_load; + undef %postponed; + undef %postponed_file; + undef %break_on_load; } ## end else [ if (defined($i)) } ## end sub delete_breakpoint @@ -4529,10 +4669,6 @@ sub cmd_stop { # As on ^C, but not signal-safy. $signal = 1; } -sub cmd_stop { # As on ^C, but not signal-safy. - $signal = 1; -} - =head3 C - help command (command) Does the work of either @@ -4547,38 +4683,42 @@ Does the work of either =cut - sub cmd_h { - my $cmd = shift; + my $cmd = shift; # If we have no operand, assume null. - my $line = shift || ''; + my $line = shift || ''; # 'h h'. Print the long-format help. - if ($line =~ /^h\s*/) { + if ( $line =~ /^h\s*/ ) { print_help($help); - } + } # 'h '. Search for the command and print only its help. - elsif ($line =~ /^(\S.*)$/) { + elsif ( $line =~ /^(\S.*)$/ ) { # support long commands; otherwise bogus errors # happen when you ask for h on for example - my $asked = $1; # the command requested - # (for proper error message) + my $asked = $1; # the command requested + # (for proper error message) - my $qasked = quotemeta($asked); # for searching; we don't - # want to use it as a pattern. - # XXX: finds CR but not + my $qasked = quotemeta($asked); # for searching; we don't + # want to use it as a pattern. + # XXX: finds CR but not # Search the help string for the command. - if ($help =~ /^ # Start of a line + if ( + $help =~ /^ # Start of a line is not a debugger command.\n"); - } + else { + print_help("B<$asked> is not a debugger command.\n"); + } } ## end elsif ($line =~ /^(\S.*)$/) # 'h' - print the summary help. else { - print_help($summary); + print_help($summary); } } ## end sub cmd_h @@ -4613,16 +4755,28 @@ sub cmd_i { my $cmd = shift; my $line = shift; eval { require Class::ISA }; - if ($@) { - &warn($@ =~ /locate/ ? "Class::ISA module not found - please install\n" : $@); - } else { - ISA: - foreach my $isa (split(/\s+/, $line)) { - no strict 'refs'; - print join(', ', map { # snaffled unceremoniously from Class::ISA - "$_".(defined(${"$_\::VERSION"}) ? ' '.${"$_\::VERSION"} : undef) - } Class::ISA::self_and_super_path($isa)); - print "\n"; + if ($@) { + &warn( $@ =~ /locate/ + ? "Class::ISA module not found - please install\n" + : $@ ); + } + else { + ISA: + foreach my $isa ( split( /\s+/, $line ) ) { + $evalarg = $isa; + ($isa) = &eval; + no strict 'refs'; + print join( + ', ', + map { # snaffled unceremoniously from Class::ISA + "$_" + . ( + defined( ${"$_\::VERSION"} ) + ? ' ' . ${"$_\::VERSION"} + : undef ) + } Class::ISA::self_and_super_path(ref($isa) || $isa) + ); + print "\n"; } } } ## end sub cmd_i @@ -4643,84 +4797,85 @@ later. sub cmd_l { my $current_line = $line; - my $cmd = shift; + my $cmd = shift; my $line = shift; # If this is '-something', delete any spaces after the dash. $line =~ s/^-\s*$/-/; - # If the line is '$something', assume this is a scalar containing a + # If the line is '$something', assume this is a scalar containing a # line number. - if ($line =~ /^(\$.*)/s) { + if ( $line =~ /^(\$.*)/s ) { # Set up for DB::eval() - evaluate in *user* context. $evalarg = $1; - $evalarg = $2; + # $evalarg = $2; my ($s) = &eval; # Ooops. Bad scalar. - print($OUT "Error: $@\n"), next CMD if $@; + print( $OUT "Error: $@\n" ), next CMD if $@; # Good scalar. If it's a reference, find what it points to. $s = CvGV_name($s); - print($OUT "Interpreted as: $1 $s\n"); + print( $OUT "Interpreted as: $1 $s\n" ); $line = "$1 $s"; # Call self recursively to really do the command. - &cmd_l('l', $s); + &cmd_l( 'l', $s ); } ## end if ($line =~ /^(\$.*)/s) - # l name. Try to find a sub by that name. - elsif ($line =~ /^([\':A-Za-z_][\':\w]*(\[.*\])?)/s) { + # l name. Try to find a sub by that name. + elsif ( $line =~ /^([\':A-Za-z_][\':\w]*(\[.*\])?)/s ) { my $s = $subname = $1; # De-Perl4. $subname =~ s/\'/::/; # Put it in this package unless it starts with ::. - $subname = $package."::".$subname unless $subname =~ /::/; + $subname = $package . "::" . $subname unless $subname =~ /::/; # Put it in CORE::GLOBAL if t doesn't start with :: and # it doesn't live in this package and it lives in CORE::GLOBAL. $subname = "CORE::GLOBAL::$s" - if not defined &$subname - and $s !~ /::/ - and defined &{"CORE::GLOBAL::$s"}; + if not defined &$subname + and $s !~ /::/ + and defined &{"CORE::GLOBAL::$s"}; # Put leading '::' names into 'main::'. - $subname = "main".$subname if substr($subname,0,2) eq "::"; + $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::"; - # Get name:start-stop from find_sub, and break this up at + # Get name:start-stop from find_sub, and break this up at # colons. - @pieces = split(/:/,find_sub($subname) || $sub{$subname}); + @pieces = split( /:/, find_sub($subname) || $sub{$subname} ); # Pull off start-stop. $subrange = pop @pieces; # If the name contained colons, the split broke it up. # Put it back together. - $file = join(':', @pieces); + $file = join( ':', @pieces ); # If we're not in that file, switch over to it. - if ($file ne $filename) { + if ( $file ne $filename ) { print $OUT "Switching to file '$file'.\n" - unless $slave_editor; + unless $slave_editor; # Switch debugger's magic structures. - *dbline = $main::{'_<' . $file}; - $max = $#dbline; + *dbline = $main::{ '_<' . $file }; + $max = $#dbline; $filename = $file; } ## end if ($file ne $filename) # Subrange is 'start-stop'. If this is less than a window full, # swap it to 'start+', which will list a window from the start point. if ($subrange) { - if (eval($subrange) < -$window) { - $subrange =~ s/-.*/+/; + if ( eval($subrange) < -$window ) { + $subrange =~ s/-.*/+/; } + # Call self recursively to list the range. $line = $subrange; - &cmd_l('l', $subrange); + &cmd_l( 'l', $subrange ); } ## end if ($subrange) # Couldn't find it. @@ -4730,16 +4885,19 @@ sub cmd_l { } ## end elsif ($line =~ /^([\':A-Za-z_][\':\w]*(\[.*\])?)/s) # Bare 'l' command. - elsif ($line =~ /^\s*$/) { + elsif ( $line =~ /^\s*$/ ) { + # Compute new range to list. $incr = $window - 1; - $line = $start . '-' . ($start + $incr); + $line = $start . '-' . ( $start + $incr ); + # Recurse to do it. - &cmd_l('l', $line); - } + &cmd_l( 'l', $line ); + } # l [start]+number_of_lines - elsif ($line =~ /^(\d*)\+(\d*)$/) { + elsif ( $line =~ /^(\d*)\+(\d*)$/ ) { + # Don't reset start for 'l +nnn'. $start = $1 if $1; @@ -4749,49 +4907,51 @@ sub cmd_l { $incr = $window - 1 unless $incr; # Create a line range we'll understand, and recurse to do it. - $line = $start . '-' . ($start + $incr); - &cmd_l('l', $line); + $line = $start . '-' . ( $start + $incr ); + &cmd_l( 'l', $line ); } ## end elsif ($line =~ /^(\d*)\+(\d*)$/) # l start-stop or l start,stop - elsif ($line =~ /^((-?[\d\$\.]+)([-,]([\d\$\.]+))?)?/) { + elsif ( $line =~ /^((-?[\d\$\.]+)([-,]([\d\$\.]+))?)?/ ) { # Determine end point; use end of file if not specified. - $end = (!defined $2) ? $max : ($4 ? $4 : $2); + $end = ( !defined $2 ) ? $max : ( $4 ? $4 : $2 ); # Go on to the end, and then stop. $end = $max if $end > $max; - # Determine start line. - $i = $2; - $i = $line if $i eq '.'; - $i = 1 if $i < 1; + # Determine start line. + $i = $2; + $i = $line if $i eq '.'; + $i = 1 if $i < 1; $incr = $end - $i; # If we're running under a slave editor, force it to show the lines. if ($slave_editor) { print $OUT "\032\032$filename:$i:0\n"; $i = $end; - } + } # We're doing it ourselves. We want to show the line and special # markers for: - # - the current line in execution + # - the current line in execution # - whether a line is breakable or not # - whether a line has a break or not # - whether a line has an action or not else { - for (; $i <= $end; $i++) { + for ( ; $i <= $end ; $i++ ) { + # Check for breakpoints and actions. - my ($stop,$action); - ($stop,$action) = split(/\0/, $dbline{$i}) - if $dbline{$i}; + my ( $stop, $action ); + ( $stop, $action ) = split( /\0/, $dbline{$i} ) + if $dbline{$i}; # ==> if this is the current line in execution, # : if it's breakable. - $arrow = ($i==$current_line and $filename eq $filename_ini) - ? '==>' - : ($dbline[$i]+0 ? ':' : ' '); + $arrow = + ( $i == $current_line and $filename eq $filename_ini ) + ? '==>' + : ( $dbline[$i] + 0 ? ':' : ' ' ); # Add break and action indicators. $arrow .= 'b' if $stop; @@ -4806,7 +4966,7 @@ sub cmd_l { # Line the prompt up; print a newline if the last line listed # didn't have a newline. - print $OUT "\n" unless $dbline[$i-1] =~ /\n$/; + print $OUT "\n" unless $dbline[ $i - 1 ] =~ /\n$/; } ## end else [ if ($slave_editor) # Save the point we last listed to in case another relative 'l' @@ -4832,35 +4992,39 @@ Watchpoints are simpler: we just list the entries in C<@to_watch>. =cut sub cmd_L { - my $cmd = shift; + my $cmd = shift; - # If no argument, list everything. Pre-5.8.0 version always lists + # If no argument, list everything. Pre-5.8.0 version always lists # everything - my $arg = shift || 'abw'; - $arg = 'abw' unless $CommandSet eq '580'; # sigh... + my $arg = shift || 'abw'; + $arg = 'abw' unless $CommandSet eq '580'; # sigh... # See what is wanted. - my $action_wanted = ($arg =~ /a/) ? 1 : 0; - my $break_wanted = ($arg =~ /b/) ? 1 : 0; - my $watch_wanted = ($arg =~ /w/) ? 1 : 0; + my $action_wanted = ( $arg =~ /a/ ) ? 1 : 0; + my $break_wanted = ( $arg =~ /b/ ) ? 1 : 0; + my $watch_wanted = ( $arg =~ /w/ ) ? 1 : 0; # Breaks and actions are found together, so we look in the same place # for both. - if ($break_wanted or $action_wanted) { + if ( $break_wanted or $action_wanted ) { + # Look in all the files with breakpoints... - for my $file (keys %had_breakpoints) { + for my $file ( keys %had_breakpoints ) { + # Temporary switch to this file. local *dbline = $main::{ '_<' . $file }; # Set up to look through the whole file. my $max = $#dbline; - my $was; # Flag: did we print something - # in this file? + my $was; # Flag: did we print something + # in this file? # For each line in the file ... - for ($i = 1; $i <= $max ; $i++) { + for ( $i = 1 ; $i <= $max ; $i++ ) { + # We've got something on this line. - if (defined $dbline{$i}) { + if ( defined $dbline{$i} ) { + # Print the header if we haven't. print $OUT "$file:\n" unless $was++; @@ -4868,17 +5032,17 @@ sub cmd_L { print $OUT " $i:\t", $dbline[$i]; # Pull out the condition and the action. - ($stop, $action) = split (/\0/, $dbline{$i}); + ( $stop, $action ) = split( /\0/, $dbline{$i} ); # Print the break if there is one and it's wanted. print $OUT " break if (", $stop, ")\n" - if $stop - and $break_wanted; + if $stop + and $break_wanted; # Print the action if there is one and it's wanted. print $OUT " action: ", $action, "\n" - if $action - and $action_wanted; + if $action + and $action_wanted; # Quit if the user hit interrupt. last if $signal; @@ -4888,57 +5052,57 @@ sub cmd_L { } ## end if ($break_wanted or $action_wanted) # Look for breaks in not-yet-compiled subs: - if (%postponed and $break_wanted) { + if ( %postponed and $break_wanted ) { print $OUT "Postponed breakpoints in subroutines:\n"; my $subname; - for $subname (keys %postponed) { - print $OUT " $subname\t$postponed{$subname}\n"; - last if $signal; + for $subname ( keys %postponed ) { + print $OUT " $subname\t$postponed{$subname}\n"; + last if $signal; } } ## end if (%postponed and $break_wanted) # Find files that have not-yet-loaded breaks: - my @have = map { # Combined keys - keys %{$postponed_file{$_}} + my @have = map { # Combined keys + keys %{ $postponed_file{$_} } } keys %postponed_file; # If there are any, list them. - if (@have and ($break_wanted or $action_wanted)) { + if ( @have and ( $break_wanted or $action_wanted ) ) { print $OUT "Postponed breakpoints in files:\n"; - my ($file, $line); - - for $file (keys %postponed_file) { - my $db = $postponed_file{$file}; - print $OUT " $file:\n"; - for $line (sort { $a <=> $b } keys %$db) { - print $OUT " $line:\n"; - my ($stop, $action) = split (/\0/, $$db{$line}); - print $OUT " break if (", $stop, ")\n" - if $stop - and $break_wanted; - print $OUT " action: ", $action, "\n" - if $action - and $action_wanted; + my ( $file, $line ); + + for $file ( keys %postponed_file ) { + my $db = $postponed_file{$file}; + print $OUT " $file:\n"; + for $line ( sort { $a <=> $b } keys %$db ) { + print $OUT " $line:\n"; + my ( $stop, $action ) = split( /\0/, $$db{$line} ); + print $OUT " break if (", $stop, ")\n" + if $stop + and $break_wanted; + print $OUT " action: ", $action, "\n" + if $action + and $action_wanted; + last if $signal; + } ## end for $line (sort { $a <=>... last if $signal; - } ## end for $line (sort { $a <=>... - last if $signal; } ## end for $file (keys %postponed_file) } ## end if (@have and ($break_wanted... - if (%break_on_load and $break_wanted) { + if ( %break_on_load and $break_wanted ) { print $OUT "Breakpoints on load:\n"; my $file; - for $file (keys %break_on_load) { - print $OUT " $file\n"; - last if $signal; - } - } ## end if (%break_on_load and... - if ($watch_wanted) { - if ($trace & 2) { - print $OUT "Watch-expressions:\n" if @to_watch; - for my $expr (@to_watch) { - print $OUT " $expr\n"; + for $file ( keys %break_on_load ) { + print $OUT " $file\n"; last if $signal; } + } ## end if (%break_on_load and... + if ($watch_wanted) { + if ( $trace & 2 ) { + print $OUT "Watch-expressions:\n" if @to_watch; + for my $expr (@to_watch) { + print $OUT " $expr\n"; + last if $signal; + } } ## end if ($trace & 2) } ## end if ($watch_wanted) } ## end sub cmd_L @@ -4962,13 +5126,13 @@ C for processing. =cut sub cmd_o { - my $cmd = shift; - my $opt = shift || ''; # opt[=val] + my $cmd = shift; + my $opt = shift || ''; # opt[=val] # Nonblank. Try to parse and process. - if ($opt =~ /^(\S.*)/) { + if ( $opt =~ /^(\S.*)/ ) { &parse_options($1); - } + } # Blank. List the current option settings. else { @@ -4985,9 +5149,9 @@ Advises the user that the O command has been renamed. =cut sub cmd_O { - print $OUT "The old O command is now the o command.\n"; # hint - print $OUT "Use 'h' to get current command help synopsis or\n"; # - print $OUT "use 'o CommandSet=pre580' to revert to old usage\n"; # + print $OUT "The old O command is now the o command.\n"; # hint + print $OUT "Use 'h' to get current command help synopsis or\n"; # + print $OUT "use 'o CommandSet=pre580' to revert to old usage\n"; # } =head3 C - view window (command) @@ -4999,14 +5163,15 @@ to do the actual listing after figuring out the range of line to request. =cut sub cmd_v { - my $cmd = shift; + my $cmd = shift; my $line = shift; # Extract the line to list around. (Astute readers will have noted that # this pattern will match whether or not a numeric line is specified, # which means that we'll always enter this loop (though a non-numeric # argument results in no action at all)). - if ($line =~ /^(\d*)$/) { + if ( $line =~ /^(\d*)$/ ) { + # Total number of lines to list (a windowful). $incr = $window - 1; @@ -5017,10 +5182,10 @@ sub cmd_v { $start -= $preview; # Put together a linespec that cmd_l will like. - $line = $start . '-' . ($start + $incr); + $line = $start . '-' . ( $start + $incr ); # List the lines. - &cmd_l('l', $line); + &cmd_l( 'l', $line ); } ## end if ($line =~ /^(\d*)$/) } ## end sub cmd_v @@ -5037,13 +5202,14 @@ of any of the expressions changes. =cut sub cmd_w { - my $cmd = shift; + my $cmd = shift; # Null expression if no arguments. my $expr = shift || ''; # If expression is not null ... - if ($expr =~ /^(\S.*)/) { + if ( $expr =~ /^(\S.*)/ ) { + # ... save it. push @to_watch, $expr; @@ -5051,8 +5217,8 @@ sub cmd_w { # in the user's context. This version can handle expressions which # return a list value. $evalarg = $expr; - my ($val) = join(' ', &eval); - $val = (defined $val) ? "'$val'" : 'undef'; + my ($val) = join( ' ', &eval ); + $val = ( defined $val ) ? "'$val'" : 'undef'; # Save the current value of the expression. push @old_watch, $val; @@ -5063,8 +5229,7 @@ sub cmd_w { # You have to give one to get one. else { - print $OUT - "Adding a watch-expression requires an expression\n"; # hint + print $OUT "Adding a watch-expression requires an expression\n"; # hint } } ## end sub cmd_w @@ -5089,7 +5254,8 @@ sub cmd_W { my $expr = shift || ''; # Delete them all. - if ($expr eq '*') { + if ( $expr eq '*' ) { + # Not watching now. $trace &= ~2; @@ -5097,10 +5263,11 @@ sub cmd_W { # And all gone. @to_watch = @old_watch = (); - } + } # Delete one of them. - elsif ($expr =~ /^(\S.*)/) { + elsif ( $expr =~ /^(\S.*)/ ) { + # Where we are in the list. my $i_cnt = 0; @@ -5109,8 +5276,10 @@ sub cmd_W { my $val = $to_watch[$i_cnt]; # Does this one match the command argument? - if ($val eq $expr) { # =~ m/^\Q$i$/) { - splice(@to_watch, $i_cnt, 1); + if ( $val eq $expr ) { # =~ m/^\Q$i$/) { + # Yes. Turn it off, and its value too. + splice( @to_watch, $i_cnt, 1 ); + splice( @old_watch, $i_cnt, 1 ); } $i_cnt++; } ## end foreach (@to_watch) @@ -5121,10 +5290,11 @@ sub cmd_W { } ## end elsif ($expr =~ /^(\S.*)/) + # No command arguments entered. else { - print $OUT -"Deleting a watch-expression requires an expression, or '*' for all\n" - ; # hint + print $OUT + "Deleting a watch-expression requires an expression, or '*' for all\n" + ; # hint } } ## end sub cmd_W @@ -5142,20 +5312,25 @@ Something to do with assertions =cut sub cmd_P { - if ($cmd =~ /^.\b\s*([+-]?)\s*(~?)\s*(\w+(\s*\|\s*\w+)*)\s*$/) { - my ($how, $neg, $flags)=($1, $2, $3); - my $acu=parse_DollarCaretP_flags($flags); - if (defined $acu) { - $acu= ~$acu if $neg; - if ($how eq '+') { $^P|=$acu } - elsif ($how eq '-') { $^P&=~$acu } - else { $^P=$acu } - } - # else { print $OUT "undefined acu\n" } - } - my $expanded=expand_DollarCaretP_flags($^P); - print $OUT "Internal Perl debugger flags:\n\$^P=$expanded\n"; - $expanded + unless ($ini_assertion) { + print $OUT "Assertions not supported in this Perl interpreter\n"; + } else { + if ( $cmd =~ /^.\b\s*([+-]?)\s*(~?)\s*(\w+(\s*\|\s*\w+)*)\s*$/ ) { + my ( $how, $neg, $flags ) = ( $1, $2, $3 ); + my $acu = parse_DollarCaretP_flags($flags); + if ( defined $acu ) { + $acu = ~$acu if $neg; + if ( $how eq '+' ) { $^P |= $acu } + elsif ( $how eq '-' ) { $^P &= ~$acu } + else { $^P = $acu } + } + + # else { print $OUT "undefined acu\n" } + } + my $expanded = expand_DollarCaretP_flags($^P); + print $OUT "Internal Perl debugger flags:\n\$^P=$expanded\n"; + $expanded; + } } =head2 save @@ -5166,15 +5341,16 @@ and installs the versions we like better. =cut sub save { - # Save eval failure, command failure, extended OS error, output field - # separator, input record separator, output record separator and + + # Save eval failure, command failure, extended OS error, output field + # separator, input record separator, output record separator and # the warning setting. - @saved = ($@, $!, $^E, $,, $/, $\, $^W); + @saved = ( $@, $!, $^E, $,, $/, $\, $^W ); - $, = ""; # output field separator is null string - $/ = "\n"; # input record separator is newline - $\ = ""; # output record separator is null string - $^W = 0; # warnings are off + $, = ""; # output field separator is null string + $/ = "\n"; # input record separator is newline + $\ = ""; # output record separator is null string + $^W = 0; # warnings are off } ## end sub save =head2 C - show where we are now @@ -5187,11 +5363,12 @@ debugger output. =cut sub print_lineinfo { + # Make the terminal sensible if we're not the primary debugger. - resetterm(1) if $LINEINFO eq $OUT and $term_pid != $$; - local $\ = ''; - local $, = ''; - print $LINEINFO @_; + resetterm(1) if $LINEINFO eq $OUT and $term_pid != $$; + local $\ = ''; + local $, = ''; + print $LINEINFO @_; } ## end sub print_lineinfo =head2 C @@ -5208,52 +5385,56 @@ we set the breakpoint on it, deleting the breakpoint from C<%postponed>. # The following takes its argument via $evalarg to preserve current @_ sub postponed_sub { + # Get the subroutine name. - my $subname = shift; + my $subname = shift; # If this is a 'break + if ' ... - if ($postponed{$subname} =~ s/^break\s([+-]?\d+)\s+if\s//) { + if ( $postponed{$subname} =~ s/^break\s([+-]?\d+)\s+if\s// ) { + # If there's no offset, use '+0'. - my $offset = $1 || 0; + my $offset = $1 || 0; # find_sub's value is 'fullpath-filename:start-stop'. It's # possible that the filename might have colons in it too. - my ($file,$i) = (find_sub($subname) =~ /^(.*):(\d+)-.*$/); - if ($i) { - # We got the start line. Add the offset '+' from + my ( $file, $i ) = ( find_sub($subname) =~ /^(.*):(\d+)-.*$/ ); + if ($i) { + + # We got the start line. Add the offset '+' from # $postponed{subname}. - $i += $offset; + $i += $offset; # Switch to the file this sub is in, temporarily. - local *dbline = $main::{'_<' . $file}; + local *dbline = $main::{ '_<' . $file }; # No warnings, please. - local $^W = 0; # != 0 is magical below + local $^W = 0; # != 0 is magical below # This file's got a breakpoint in it. - $had_breakpoints{$file} |= 1; + $had_breakpoints{$file} |= 1; # Last line in file. - my $max = $#dbline; + my $max = $#dbline; # Search forward until we hit a breakable line or get to # the end of the file. - ++$i until $dbline[$i] != 0 or $i >= $max; + ++$i until $dbline[$i] != 0 or $i >= $max; # Copy the breakpoint in and delete it from %postponed. - $dbline{$i} = delete $postponed{$subname}; + $dbline{$i} = delete $postponed{$subname}; } ## end if ($i) # find_sub didn't find the sub. - else { - local $\ = ''; - print $OUT "Subroutine $subname not found.\n"; - } - return; - } - elsif ($postponed{$subname} eq 'compile') { $signal = 1 } - #print $OUT "In postponed_sub for `$subname'.\n"; -} + else { + local $\ = ''; + print $OUT "Subroutine $subname not found.\n"; + } + return; + } ## end if ($postponed{$subname... + elsif ( $postponed{$subname} eq 'compile' ) { $signal = 1 } + + #print $OUT "In postponed_sub for `$subname'.\n"; +} ## end sub postponed_sub =head2 C @@ -5270,17 +5451,19 @@ If it's a subroutine, the incoming parameter is the subroutine name. =cut sub postponed { + # If there's a break, process it. if ($ImmediateStop) { - # Right, we've stopped. Turn it off. - $ImmediateStop = 0; - # Enter the command loop when DB::DB gets called. - $signal = 1; + # Right, we've stopped. Turn it off. + $ImmediateStop = 0; + + # Enter the command loop when DB::DB gets called. + $signal = 1; } # If this is a subroutine, let postponed_sub() deal with it. - return &postponed_sub unless ref \$_[0] eq 'GLOB'; # A subroutine is compiled. + return &postponed_sub unless ref \$_[0] eq 'GLOB'; # Not a subroutine. Deal with the file. local *dbline = shift; @@ -5288,8 +5471,8 @@ sub postponed { $filename =~ s/^_ @@ -5429,62 +5614,65 @@ correct if this routine is called in a tied method. # Tied method do not create a context, so may get wrong message: sub print_trace { - local $\ = ''; - my $fh = shift; + local $\ = ''; + my $fh = shift; + # If this is going to a slave editor, but we're not the primary # debugger, reset it first. - resetterm(1) - if $fh eq $LINEINFO # slave editor - and $LINEINFO eq $OUT # normal output - and $term_pid != $$; # not the primary + resetterm(1) + if $fh eq $LINEINFO # slave editor + and $LINEINFO eq $OUT # normal output + and $term_pid != $$; # not the primary # Collect the actual trace information to be formatted. # This is an array of hashes of subroutine call info. - my @sub = dump_trace($_[0] + 1, $_[1]); + my @sub = dump_trace( $_[0] + 1, $_[1] ); # Grab the "short report" flag from @_. - my $short = $_[2]; # Print short report, next one for sub name + my $short = $_[2]; # Print short report, next one for sub name # Run through the traceback info, format it, and print it. - my $s; - for ($i=0; $i <= $#sub; $i++) { + my $s; + for ( $i = 0 ; $i <= $#sub ; $i++ ) { + # Drop out if the user has lost interest and hit control-C. - last if $signal; + last if $signal; - # Set the separator so arrys print nice. - local $" = ', '; + # Set the separator so arrys print nice. + local $" = ', '; # Grab and stringify the arguments if they are there. - my $args = - defined $sub[$i]{args} - ? "(@{ $sub[$i]{args} })" - : '' ; + my $args = + defined $sub[$i]{args} + ? "(@{ $sub[$i]{args} })" + : ''; + # Shorten them up if $maxtrace says they're too long. - $args = (substr $args, 0, $maxtrace - 3) . '...' - if length $args > $maxtrace; + $args = ( substr $args, 0, $maxtrace - 3 ) . '...' + if length $args > $maxtrace; # Get the file name. - my $file = $sub[$i]{file}; + my $file = $sub[$i]{file}; # Put in a filename header if short is off. - $file = $file eq '-e' ? $file : "file `$file'" unless $short; + $file = $file eq '-e' ? $file : "file `$file'" unless $short; # Get the actual sub's name, and shorten to $maxtrace's requirement. - $s = $sub[$i]{sub}; - $s = (substr $s, 0, $maxtrace - 3) . '...' if length $s > $maxtrace; + $s = $sub[$i]{sub}; + $s = ( substr $s, 0, $maxtrace - 3 ) . '...' if length $s > $maxtrace; # Short report uses trimmed file and sub names. - if ($short) { - my $sub = @_ >= 4 ? $_[3] : $s; - print $fh - "$sub[$i]{context}=$sub$args from $file:$sub[$i]{line}\n"; - } ## end if ($short) + if ($short) { + my $sub = @_ >= 4 ? $_[3] : $s; + print $fh "$sub[$i]{context}=$sub$args from $file:$sub[$i]{line}\n"; + } ## end if ($short) # Non-short report includes full names. - else { - print $fh "$sub[$i]{context} = $s$args" . " called from $file" . - " line $sub[$i]{line}\n"; - } + else { + print $fh "$sub[$i]{context} = $s$args" + . " called from $file" + . " line $sub[$i]{line}\n"; + } } ## end for ($i = 0 ; $i <= $#sub... } ## end sub print_trace @@ -5521,31 +5709,31 @@ stack frame. Each has the following keys and values: sub dump_trace { # How many levels to skip. - my $skip = shift; + my $skip = shift; # How many levels to show. (1e9 is a cheap way of saying "all of them"; # it's unlikely that we'll have more than a billion stack frames. If you # do, you've got an awfully big machine...) - my $count = shift || 1e9; + my $count = shift || 1e9; # We increment skip because caller(1) is the first level *back* from - # the current one. Add $skip to the count of frames so we have a + # the current one. Add $skip to the count of frames so we have a # simple stop criterion, counting from $skip to $count+$skip. - $skip++; - $count += $skip; + $skip++; + $count += $skip; # These variables are used to capture output from caller(); - my ($p, $file, $line, $sub, $h, $context); + my ( $p, $file, $line, $sub, $h, $context ); - my ($e, $r, @a, @sub, $args); + my ( $e, $r, @a, @sub, $args ); # XXX Okay... why'd we do that? - my $nothard = not $frame & 8; - local $frame = 0; + my $nothard = not $frame & 8; + local $frame = 0; # Do not want to trace this. - my $otrace = $trace; - $trace = 0; + my $otrace = $trace; + $trace = 0; # Start out at the skip count. # If we haven't reached the number of frames requested, and caller() is @@ -5553,101 +5741,102 @@ sub dump_trace { # number of stack frames, or we run out - caller() returns nothing - we # quit. # Up the stack frame index to go back one more level each time. - for ( - $i = $skip; - $i < $count - and ($p,$file,$line,$sub,$h,$context,$e,$r) = caller($i); - $i++ - ) + for ( + $i = $skip ; + $i < $count + and ( $p, $file, $line, $sub, $h, $context, $e, $r ) = caller($i) ; + $i++ + ) { # Go through the arguments and save them for later. - @a = (); - for $arg (@args) { - my $type; - if (not defined $arg) { - push @a, "undef"; - } - - elsif ($nothard and tied $arg) { - push @a, "tied"; - } - elsif ($nothard and $type = ref $arg) { - push @a, "ref($type)"; - } - else { - local $_ = - "$arg"; # Safe to stringify now - should not call f(). + @a = (); + for $arg (@args) { + my $type; + if ( not defined $arg ) { # undefined parameter + push @a, "undef"; + } + + elsif ( $nothard and tied $arg ) { # tied parameter + push @a, "tied"; + } + elsif ( $nothard and $type = ref $arg ) { # reference + push @a, "ref($type)"; + } + else { # can be stringified + local $_ = + "$arg"; # Safe to stringify now - should not call f(). # Backslash any single-quotes or backslashes. - s/([\'\\])/\\$1/g; + s/([\'\\])/\\$1/g; # Single-quote it unless it's a number or a colon-separated # name. - s/(.*)/'$1'/s - unless /^(?: -?[\d.]+ | \*[\w:]* )$/x; + s/(.*)/'$1'/s + unless /^(?: -?[\d.]+ | \*[\w:]* )$/x; # Turn high-bit characters into meta-whatever. - s/([\200-\377])/sprintf("M-%c",ord($1)&0177)/eg; + s/([\200-\377])/sprintf("M-%c",ord($1)&0177)/eg; # Turn control characters into ^-whatever. - s/([\0-\37\177])/sprintf("^%c",ord($1)^64)/eg; + s/([\0-\37\177])/sprintf("^%c",ord($1)^64)/eg; - push(@a, $_); + push( @a, $_ ); } ## end else [ if (not defined $arg) } ## end for $arg (@args) # If context is true, this is array (@)context. # If context is false, this is scalar ($) context. - # If neither, context isn't defined. (This is apparently a 'can't + # If neither, context isn't defined. (This is apparently a 'can't # happen' trap.) - $context = $context ? '@' : (defined $context ? "\$" : '.'); + $context = $context ? '@' : ( defined $context ? "\$" : '.' ); # if the sub has args ($h true), make an anonymous array of the # dumped args. - $args = $h ? [@a] : undef; + $args = $h ? [@a] : undef; # remove trailing newline-whitespace-semicolon-end of line sequence # from the eval text, if any. - $e =~ s/\n\s*\;\s*\Z// if $e; + $e =~ s/\n\s*\;\s*\Z// if $e; # Escape backslashed single-quotes again if necessary. - $e =~ s/([\\\'])/\\$1/g if $e; + $e =~ s/([\\\'])/\\$1/g if $e; # if the require flag is true, the eval text is from a require. - if ($r) { - $sub = "require '$e'"; - } + if ($r) { + $sub = "require '$e'"; + } + # if it's false, the eval text is really from an eval. - elsif (defined $r) { - $sub = "eval '$e'"; - } + elsif ( defined $r ) { + $sub = "eval '$e'"; + } # If the sub is '(eval)', this is a block eval, meaning we don't # know what the eval'ed text actually was. - elsif ($sub eq '(eval)') { - $sub = "eval {...}"; - } + elsif ( $sub eq '(eval)' ) { + $sub = "eval {...}"; + } # Stick the collected information into @sub as an anonymous hash. - push ( - @sub, - { - context => $context, - sub => $sub, - args => $args, - file => $file, - line => $line - } + push( + @sub, + { + context => $context, + sub => $sub, + args => $args, + file => $file, + line => $line + } ); # Stop processing frames if the user hit control-C. - last if $signal; + last if $signal; } ## end for ($i = $skip ; $i < ... # Restore the trace value again. - $trace = $otrace; - @sub; + $trace = $otrace; + @sub; } ## end sub dump_trace =head2 C @@ -5662,9 +5851,10 @@ without a trailing backslash. sub action { my $action = shift; - while ($action =~ s/\\$//) { + while ( $action =~ s/\\$// ) { + # We have a backslash on the end. Read more. - $action .= &gets; + $action .= &gets; } ## end while ($action =~ s/\\$//) # Return the assembled action. @@ -5683,19 +5873,19 @@ already defined, we don't try to define it again. A speed hack. =cut -sub unbalanced { +sub unbalanced { # I hate using globals! $balanced_brace_re ||= qr{ - ^ \{ - (?: - (?> [^{}] + ) # Non-parens without backtracking - | - (??{ $balanced_brace_re }) # Group with matching parens - ) * - \} $ + ^ \{ + (?: + (?> [^{}] + ) # Non-parens without backtracking + | + (??{ $balanced_brace_re }) # Group with matching parens + ) * + \} $ }x; - return $_[0] !~ m/$balanced_brace_re/; + return $_[0] !~ m/$balanced_brace_re/; } ## end sub unbalanced =head2 C @@ -5723,30 +5913,31 @@ and then puts everything back again. =cut sub system { + # We save, change, then restore STDIN and STDOUT to avoid fork() since # some non-Unix systems can do system() but have problems with fork(). - open(SAVEIN,"<&STDIN") || &warn("Can't save STDIN"); - open(SAVEOUT,">&STDOUT") || &warn("Can't save STDOUT"); - open(STDIN,"<&IN") || &warn("Can't redirect STDIN"); - open(STDOUT,">&OUT") || &warn("Can't redirect STDOUT"); + open( SAVEIN, "<&STDIN" ) || &warn("Can't save STDIN"); + open( SAVEOUT, ">&STDOUT" ) || &warn("Can't save STDOUT"); + open( STDIN, "<&IN" ) || &warn("Can't redirect STDIN"); + open( STDOUT, ">&OUT" ) || &warn("Can't redirect STDOUT"); # XXX: using csh or tcsh destroys sigint retvals! system(@_); - open(STDIN,"<&SAVEIN") || &warn("Can't restore STDIN"); - open(STDOUT,">&SAVEOUT") || &warn("Can't restore STDOUT"); - close(SAVEIN); + open( STDIN, "<&SAVEIN" ) || &warn("Can't restore STDIN"); + open( STDOUT, ">&SAVEOUT" ) || &warn("Can't restore STDOUT"); + close(SAVEIN); close(SAVEOUT); # most of the $? crud was coping with broken cshisms - if ($? >> 8) { - &warn("(Command exited ", ($? >> 8), ")\n"); - } - elsif ($?) { - &warn( - "(Command died of SIG#", - ($? & 127), - (($? & 128) ? " -- core dumped" : ""), - ")", "\n" + if ( $? >> 8 ) { + &warn( "(Command exited ", ( $? >> 8 ), ")\n" ); + } + elsif ($?) { + &warn( + "(Command died of SIG#", + ( $? & 127 ), + ( ( $? & 128 ) ? " -- core dumped" : "" ), + ")", "\n" ); } ## end elsif ($?) @@ -5775,6 +5966,7 @@ the appropriate attributes. We then =cut sub setterm { + # Load Term::Readline, but quietly; don't debug it and don't trace it. local $frame = 0; local $doret = -2; @@ -5782,64 +5974,64 @@ sub setterm { # If noTTY is set, but we have a TTY name, go ahead and hook up to it. if ($notty) { - if ($tty) { - my ($i, $o) = split $tty, /,/; - $o = $i unless defined $o; - open(IN, "<$i") or die "Cannot open TTY `$i' for read: $!"; - open(OUT, ">$o") or die "Cannot open TTY `$o' for write: $!"; - $IN = \*IN; - $OUT = \*OUT; - my $sel = select($OUT); - $| = 1; - select($sel); + if ($tty) { + my ( $i, $o ) = split $tty, /,/; + $o = $i unless defined $o; + open( IN, "<$i" ) or die "Cannot open TTY `$i' for read: $!"; + open( OUT, ">$o" ) or die "Cannot open TTY `$o' for write: $!"; + $IN = \*IN; + $OUT = \*OUT; + my $sel = select($OUT); + $| = 1; + select($sel); } ## end if ($tty) # We don't have a TTY - try to find one via Term::Rendezvous. - else { - eval "require Term::Rendezvous;" or die; + else { + eval "require Term::Rendezvous;" or die; + # See if we have anything to pass to Term::Rendezvous. # Use /tmp/perldbtty$$ if not. - my $rv = $ENV{PERLDB_NOTTY} || ".perldbtty$$"; + my $rv = $ENV{PERLDB_NOTTY} || "/tmp/perldbtty$$"; # Rendezvous and get the filehandles. - my $term_rv = new Term::Rendezvous $rv; - $IN = $term_rv->IN; - $OUT = $term_rv->OUT; + my $term_rv = new Term::Rendezvous $rv; + $IN = $term_rv->IN; + $OUT = $term_rv->OUT; } ## end else [ if ($tty) } ## end if ($notty) - # We're a daughter debugger. Try to fork off another TTY. - if ($term_pid eq '-1') { # In a TTY with another debugger - resetterm(2); + if ( $term_pid eq '-1' ) { # In a TTY with another debugger + resetterm(2); } # If we shouldn't use Term::ReadLine, don't. - if (!$rl) { - $term = new Term::ReadLine::Stub 'perldb', $IN, $OUT; - } + if ( !$rl ) { + $term = new Term::ReadLine::Stub 'perldb', $IN, $OUT; + } # We're using Term::ReadLine. Get all the attributes for this terminal. else { - $term = new Term::ReadLine 'perldb', $IN, $OUT; - - $rl_attribs = $term->Attribs; - $rl_attribs->{basic_word_break_characters} .= '-:+/*,[])}' - if defined $rl_attribs->{basic_word_break_characters} - and index($rl_attribs->{basic_word_break_characters}, ":") == -1; - $rl_attribs->{special_prefixes} = '$@&%'; - $rl_attribs->{completer_word_break_characters} .= '$@&%'; - $rl_attribs->{completion_function} = \&db_complete; + $term = new Term::ReadLine 'perldb', $IN, $OUT; + + $rl_attribs = $term->Attribs; + $rl_attribs->{basic_word_break_characters} .= '-:+/*,[])}' + if defined $rl_attribs->{basic_word_break_characters} + and index( $rl_attribs->{basic_word_break_characters}, ":" ) == -1; + $rl_attribs->{special_prefixes} = '$@&%'; + $rl_attribs->{completer_word_break_characters} .= '$@&%'; + $rl_attribs->{completion_function} = \&db_complete; } ## end else [ if (!$rl) # Set up the LINEINFO filehandle. - $LINEINFO = $OUT unless defined $LINEINFO; + $LINEINFO = $OUT unless defined $LINEINFO; $lineinfo = $console unless defined $lineinfo; $term->MinLine(2); - if ($term->Features->{setHistory} and "@hist" ne "?") { - $term->SetHistory(@hist); + if ( $term->Features->{setHistory} and "@hist" ne "?" ) { + $term->SetHistory(@hist); } # XXX Ornaments are turned on unconditionally, which is not @@ -5884,19 +6076,19 @@ properly set up. =cut sub xterm_get_fork_TTY { - (my $name = $0) =~ s,^.*[/\\],,s; - open XT, + ( my $name = $0 ) =~ s,^.*[/\\],,s; + open XT, qq[3>&1 xterm -title "Daughter Perl debugger $pids $name" -e sh -c 'tty 1>&3;\ sleep 10000000' |]; # Get the output from 'tty' and clean it up a little. - my $tty = ; - chomp $tty; + my $tty = ; + chomp $tty; - $pidprompt = ''; # Shown anyway in titlebar + $pidprompt = ''; # Shown anyway in titlebar # There's our new TTY. - return $tty; + return $tty; } ## end sub xterm_get_fork_TTY =head3 C @@ -5907,34 +6099,33 @@ XXX It behooves an OS/2 expert to write the necessary documentation for this! # This example function resets $IN, $OUT itself sub os2_get_fork_TTY { - local $^F = 40; # XXXX Fixme! - local $\ = ''; - my ($in1, $out1, $in2, $out2); - - # Having -d in PERL5OPT would lead to a disaster... - local $ENV{PERL5OPT} = $ENV{PERL5OPT} if $ENV{PERL5OPT}; - $ENV{PERL5OPT} =~ s/(?:^|(?<=\s))-d\b// if $ENV{PERL5OPT}; - $ENV{PERL5OPT} =~ s/(?:^|(?<=\s))-d\B/-/ if $ENV{PERL5OPT}; - print $OUT "Making kid PERL5OPT->`$ENV{PERL5OPT}'.\n" if $ENV{PERL5OPT}; - local $ENV{PERL5LIB} = $ENV{PERL5LIB} ? $ENV{PERL5LIB} : $ENV{PERLLIB}; - $ENV{PERL5LIB} = '' unless defined $ENV{PERL5LIB}; - $ENV{PERL5LIB} = join ';', @ini_INC, split /;/, $ENV{PERL5LIB}; - (my $name = $0) =~ s,^.*[/\\],,s; - my @args; - - if ( - pipe $in1, $out1 + local $^F = 40; # XXXX Fixme! + local $\ = ''; + my ( $in1, $out1, $in2, $out2 ); + + # Having -d in PERL5OPT would lead to a disaster... + local $ENV{PERL5OPT} = $ENV{PERL5OPT} if $ENV{PERL5OPT}; + $ENV{PERL5OPT} =~ s/(?:^|(?<=\s))-d\b// if $ENV{PERL5OPT}; + $ENV{PERL5OPT} =~ s/(?:^|(?<=\s))-d\B/-/ if $ENV{PERL5OPT}; + print $OUT "Making kid PERL5OPT->`$ENV{PERL5OPT}'.\n" if $ENV{PERL5OPT}; + local $ENV{PERL5LIB} = $ENV{PERL5LIB} ? $ENV{PERL5LIB} : $ENV{PERLLIB}; + $ENV{PERL5LIB} = '' unless defined $ENV{PERL5LIB}; + $ENV{PERL5LIB} = join ';', @ini_INC, split /;/, $ENV{PERL5LIB}; + ( my $name = $0 ) =~ s,^.*[/\\],,s; + my @args; + + if ( + pipe $in1, $out1 and pipe $in2, $out2 - # system P_SESSION will fail if there is another process - # in the same session with a "dependent" asynchronous child session. - and @args = ( - $rl, fileno $in1, fileno $out2, - "Daughter Perl debugger $pids $name" - ) + # system P_SESSION will fail if there is another process + # in the same session with a "dependent" asynchronous child session. + and @args = ( + $rl, fileno $in1, fileno $out2, "Daughter Perl debugger $pids $name" + ) and ( - ($kpid = CORE::system 4, $^X, '-we', - <<'ES', @args) >= 0 # P_SESSION + ( $kpid = CORE::system 4, $^X, '-we', + <<'ES', @args ) >= 0 # P_SESSION END {sleep 5 unless $loaded} BEGIN {open STDIN, ' @@ -5992,28 +6183,29 @@ sub create_IN_OUT { # Create a window with IN/OUT handles redirected there # the TTY name if get_fork_TTY works. my $in = &get_fork_TTY if defined &get_fork_TTY; - # It used to be that - $in = $fork_TTY if defined $fork_TTY; # Backward compatibility - if (not defined $in) { - my $why = shift; + # It used to be that + $in = $fork_TTY if defined $fork_TTY; # Backward compatibility + + if ( not defined $in ) { + my $why = shift; # We don't know how. - print_help(< Forked, but do not know how to create a new B. I<#########> EOP # Forked debugger. - print_help(< Daughter session, do not know how to change a B. I<#########> This may be an asynchronous session, so the parent debugger may be active. EOP # Note that both debuggers are fighting over the same input. - print_help(< in B<\$DB::fork_TTY>, or define a function B returning this. @@ -6023,12 +6215,11 @@ EOP EOP } ## end if (not defined $in) - - elsif ($in ne '') { - TTY($in); - } + elsif ( $in ne '' ) { + TTY($in); + } else { - $console = ''; # Indicate no need to open-from-the-console + $console = ''; # Indicate no need to open-from-the-console } undef $fork_TTY; } ## end sub create_IN_OUT @@ -6052,7 +6243,7 @@ and try to do that. =cut -sub resetterm { # We forked, so we need a different TTY +sub resetterm { # We forked, so we need a different TTY # Needs to be passed to create_IN_OUT() as well. my $in = shift; @@ -6063,12 +6254,12 @@ sub resetterm { # We forked, so we need a different TTY # If there's already a list of pids, add this to the end. if ($pids) { - $pids =~ s/\]/$systemed->$$]/; - } + $pids =~ s/\]/$systemed->$$]/; + } # No pid list. Time to make one. else { - $pids = "[$term_pid->$$]"; + $pids = "[$term_pid->$$]"; } # The prompt we're going to be using for this debugger. @@ -6104,59 +6295,64 @@ core C and return its value. sub readline { # Localize to prevent it from being smashed in the program being debugged. - local $.; + local $.; # Pull a line out of the typeahead if there's stuff there. - if (@typeahead) { + if (@typeahead) { + # How many lines left. - my $left = @typeahead; + my $left = @typeahead; # Get the next line. - my $got = shift @typeahead; + my $got = shift @typeahead; # Print a message saying we got input from the typeahead. - local $\ = ''; - print $OUT "auto(-$left)", shift, $got, "\n"; + local $\ = ''; + print $OUT "auto(-$left)", shift, $got, "\n"; # Add it to the terminal history (if possible). - $term->AddHistory($got) - if length($got) > 1 - and defined $term->Features->{addHistory}; - return $got; + $term->AddHistory($got) + if length($got) > 1 + and defined $term->Features->{addHistory}; + return $got; } ## end if (@typeahead) - # We really need to read some input. Turn off entry/exit trace and + # We really need to read some input. Turn off entry/exit trace and # return value printing. - local $frame = 0; - local $doret = -2; + local $frame = 0; + local $doret = -2; # If there are stacked filehandles to read from ... - while (@cmdfhs) { + while (@cmdfhs) { + # Read from the last one in the stack. - my $line = CORE::readline($cmdfhs[-1]); + my $line = CORE::readline( $cmdfhs[-1] ); + # If we got a line ... - defined $line - ? (print $OUT ">> $line" and return $line) - : close pop @cmdfhs; + defined $line + ? ( print $OUT ">> $line" and return $line ) # Echo and return + : close pop @cmdfhs; # Pop and close } ## end while (@cmdfhs) # Nothing on the filehandle stack. Socket? - if (ref $OUT and UNIVERSAL::isa($OUT, 'IO::Socket::INET')) { + if ( ref $OUT and UNIVERSAL::isa( $OUT, 'IO::Socket::INET' ) ) { + # Send anyting we have to send. - $OUT->write(join('', @_)); + $OUT->write( join( '', @_ ) ); # Receive anything there is to receive. - my $stuff; - $IN->recv( $stuff, 2048 ); # XXX: what's wrong with sysread? + my $stuff; + $IN->recv( $stuff, 2048 ); # XXX "what's wrong with sysread?" + # XXX Don't know. You tell me. # What we got. - $stuff; + $stuff; } ## end if (ref $OUT and UNIVERSAL::isa... # No socket. Just read from the terminal. - else { - $term->readline(@_); - } + else { + $term->readline(@_); + } } ## end sub readline =head1 OPTIONS SUPPORT ROUTINES @@ -6172,18 +6368,17 @@ its value. =cut sub dump_option { - my ($opt, $val)= @_; - $val = option_val($opt,'N/A'); + my ( $opt, $val ) = @_; + $val = option_val( $opt, 'N/A' ); $val =~ s/([\\\'])/\\$1/g; printf $OUT "%20s = '%s'\n", $opt, $val; } ## end sub dump_option - sub options2remember { - foreach my $k (@RememberOnROptions) { - $option{$k}=option_val($k, 'N/A'); - } - return %option; + foreach my $k (@RememberOnROptions) { + $option{$k} = option_val( $k, 'N/A' ); + } + return %option; } =head2 C - find the current value of an option @@ -6197,41 +6392,43 @@ You must supply a default value to be used in case the option isn't set. =cut sub option_val { - my ($opt, $default) = @_; + my ( $opt, $default ) = @_; my $val; # Does this option exist, and is it a variable? # If so, retrieve the value via the value in %optionVars. - if (defined $optionVars{$opt} - and defined ${ $optionVars{$opt} }) { + if ( defined $optionVars{$opt} + and defined ${ $optionVars{$opt} } ) + { $val = ${ $optionVars{$opt} }; } # Does this option exist, and it's a subroutine? # If so, call the subroutine via the ref in %optionAction # and capture the value. - elsif (defined $optionAction{$opt} - and defined &{$optionAction{$opt}}) { - $val = &{$optionAction{$opt}}(); - } + elsif ( defined $optionAction{$opt} + and defined &{ $optionAction{$opt} } ) + { + $val = &{ $optionAction{$opt} }(); + } # If there's an action or variable for the supplied option, # but no value was set, use the default. elsif (defined $optionAction{$opt} and not defined $option{$opt} - or defined $optionVars{$opt} and not defined ${$optionVars{$opt}}) + or defined $optionVars{$opt} and not defined ${ $optionVars{$opt} } ) { $val = $default; - } + } # Otherwise, do the simple hash lookup. else { - $val = $option{$opt}; + $val = $option{$opt}; } # If the value isn't defined, use the default. # Then return whatever the value is. $val = $default unless defined $val; - $val + $val; } ## end sub option_val =head2 C @@ -6256,110 +6453,113 @@ during initialization. =cut sub parse_options { - local($_)= @_; + local ($_) = @_; local $\ = ''; # These options need a value. Don't allow them to be clobbered by accident. - my %opt_needs_val = map { ($_ => 1) } qw{ - dumpDepth arrayDepth hashDepth LineInfo maxTraceLen ornaments windowSize - pager quote ReadLine recallCommand RemotePort ShellBang TTY CommandSet + my %opt_needs_val = map { ( $_ => 1 ) } qw{ + dumpDepth arrayDepth hashDepth LineInfo maxTraceLen ornaments windowSize + pager quote ReadLine recallCommand RemotePort ShellBang TTY CommandSet }; while (length) { - my $val_defaulted; + my $val_defaulted; # Clean off excess leading whitespace. - s/^\s+// && next; + s/^\s+// && next; # Options are always all word characters, followed by a non-word # separator. - s/^(\w+)(\W?)// or print($OUT "Invalid option `$_'\n"), last; - my ($opt,$sep) = ($1,$2); + s/^(\w+)(\W?)// or print( $OUT "Invalid option `$_'\n" ), last; + my ( $opt, $sep ) = ( $1, $2 ); - my $val; + # Make sure that such an option exists. + my $matches = grep( /^\Q$opt/ && ( $option = $_ ), @options ) + || grep( /^\Q$opt/i && ( $option = $_ ), @options ); + + print( $OUT "Unknown option `$opt'\n" ), next unless $matches; + print( $OUT "Ambiguous option `$opt'\n" ), next if $matches > 1; + my $val; # '?' as separator means query, but must have whitespace after it. - if ("?" eq $sep) { - print($OUT "Option query `$opt?' followed by non-space `$_'\n"), last - if /^\S/; + if ( "?" eq $sep ) { + print( $OUT "Option query `$opt?' followed by non-space `$_'\n" ), + last + if /^\S/; - #&dump_option($opt); - } ## end if ("?" eq $sep) + #&dump_option($opt); + } ## end if ("?" eq $sep) # Separator is whitespace (or just a carriage return). # They're going for a default, which we assume is 1. - elsif ($sep !~ /\S/) { - $val_defaulted = 1; - $val = "1"; # this is an evil default; make 'em set it! - } + elsif ( $sep !~ /\S/ ) { + $val_defaulted = 1; + $val = "1"; # this is an evil default; make 'em set it! + } # Separator is =. Trying to set a value. - elsif ($sep eq "=") { + elsif ( $sep eq "=" ) { + # If quoted, extract a quoted string. - if (s/ (["']) ( (?: \\. | (?! \1 ) [^\\] )* ) \1 //x) { + if (s/ (["']) ( (?: \\. | (?! \1 ) [^\\] )* ) \1 //x) { my $quote = $1; - ($val = $2) =~ s/\\([$quote\\])/$1/g; - } + ( $val = $2 ) =~ s/\\([$quote\\])/$1/g; + } # Not quoted. Use the whole thing. Warn about 'option='. - else { - s/^(\S*)//; - $val = $1; - print OUT qq(Option better cleared using $opt=""\n) - unless length $val; - } ## end else [ if (s/ (["']) ( (?: \\. | (?! \1 ) [^\\] )* ) \1 //x) - - } ## end elsif ($sep eq "=") - - # "Quoted" with [], <>, or {}. - else { #{ to "let some poor schmuck bounce on the % key in B." - my ($end) = "\\" . substr( ")]>}$sep", index("([<{",$sep), 1 ); #} - s/^(([^\\$end]|\\[\\$end])*)$end($|\s+)// - or print($OUT "Unclosed option value `$opt$sep$_'\n"), last; - ($val = $1) =~ s/\\([\\$end])/$1/g; - } ## end else [ if ("?" eq $sep) - - my $option; - my $matches = grep( /^\Q$opt/ && ($option = $_), @options ) - || grep( /^\Q$opt/i && ($option = $_), @options ); - - print($OUT "Unknown option `$opt'\n"), next unless $matches; - print($OUT "Ambiguous option `$opt'\n"), next if $matches > 1; + else { + s/^(\S*)//; + $val = $1; + print OUT qq(Option better cleared using $opt=""\n) + unless length $val; + } ## end else [ if (s/ (["']) ( (?: \\. | (?! \1 ) [^\\] )* ) \1 //x) + + } ## end elsif ($sep eq "=") + + # "Quoted" with [], <>, or {}. + else { #{ to "let some poor schmuck bounce on the % key in B." + my ($end) = + "\\" . substr( ")]>}$sep", index( "([<{", $sep ), 1 ); #} + s/^(([^\\$end]|\\[\\$end])*)$end($|\s+)// + or print( $OUT "Unclosed option value `$opt$sep$_'\n" ), last; + ( $val = $1 ) =~ s/\\([\\$end])/$1/g; + } ## end else [ if ("?" eq $sep) # Exclude non-booleans from getting set to 1 by default. - if ($opt_needs_val{$option} && $val_defaulted) { - my $cmd = ($CommandSet eq '580') ? 'o' : 'O'; - print $OUT "Option `$opt' is non-boolean. Use `$cmd $option=VAL' to set, `$cmd $option?' to query\n"; - next; - } ## end if ($opt_needs_val{$option... + if ( $opt_needs_val{$option} && $val_defaulted ) { + my $cmd = ( $CommandSet eq '580' ) ? 'o' : 'O'; + print $OUT +"Option `$opt' is non-boolean. Use `$cmd $option=VAL' to set, `$cmd $option?' to query\n"; + next; + } ## end if ($opt_needs_val{$option... # Save the option value. - $option{$option} = $val if defined $val; + $option{$option} = $val if defined $val; # Load any module that this option requires. - eval qq{ - local \$frame = 0; - local \$doret = -2; - require '$optionRequire{$option}'; - 1; - } || die # XXX: shouldn't happen - if defined $optionRequire{$option} && - defined $val; - - # Set it. + eval qq{ + local \$frame = 0; + local \$doret = -2; + require '$optionRequire{$option}'; + 1; + } || die # XXX: shouldn't happen + if defined $optionRequire{$option} + && defined $val; + + # Set it. # Stick it in the proper variable if it goes in a variable. - ${$optionVars{$option}} = $val - if defined $optionVars{$option} && - defined $val; + ${ $optionVars{$option} } = $val + if defined $optionVars{$option} + && defined $val; # Call the appropriate sub if it gets set via sub. - &{$optionAction{$option}} ($val) - if defined $optionAction{$option} && - defined &{$optionAction{$option}} && - defined $val; + &{ $optionAction{$option} }($val) + if defined $optionAction{$option} + && defined &{ $optionAction{$option} } + && defined $val; # Not initialization - echo the value we set it to. - dump_option($option) unless $OUT eq \*STDERR; + dump_option($option) unless $OUT eq \*STDERR; } ## end while (length) } ## end sub parse_options @@ -6378,19 +6578,19 @@ then as hexadecimal values. =cut sub set_list { - my ($stem, @list) = @_; - my $val; + my ( $stem, @list ) = @_; + my $val; # VAR_n: how many we have. Scalar assignment gets the number of items. - $ENV{"${stem}_n"} = @list; + $ENV{"${stem}_n"} = @list; # Grab each item in the list, escape the backslashes, encode the non-ASCII # as hex, and then save in the appropriate VAR_0, VAR_1, etc. - for $i (0 .. $#list) { - $val = $list[$i]; - $val =~ s/\\/\\\\/g; - $val =~ s/([\0-\37\177\200-\377])/"\\0x" . unpack('H2',$1)/eg; - $ENV{"${stem}_$i"} = $val; + for $i ( 0 .. $#list ) { + $val = $list[$i]; + $val =~ s/\\/\\\\/g; + $val =~ s/([\0-\37\177\200-\377])/"\\0x" . unpack('H2',$1)/eg; + $ENV{"${stem}_$i"} = $val; } ## end for $i (0 .. $#list) } ## end sub set_list @@ -6402,16 +6602,16 @@ back, and then pull VAR_0, VAR_1. etc. back out. =cut sub get_list { - my $stem = shift; - my @list; - my $n = delete $ENV{"${stem}_n"}; - my $val; - for $i (0 .. $n - 1) { - $val = delete $ENV{"${stem}_$i"}; - $val =~ s/\\((\\)|0x(..))/ $2 ? $2 : pack('H2', $3) /ge; - push @list, $val; - } - @list; + my $stem = shift; + my @list; + my $n = delete $ENV{"${stem}_n"}; + my $val; + for $i ( 0 .. $n - 1 ) { + $val = delete $ENV{"${stem}_$i"}; + $val =~ s/\\((\\)|0x(..))/ $2 ? $2 : pack('H2', $3) /ge; + push @list, $val; + } + @list; } ## end sub get_list =head1 MISCELLANEOUS SIGNAL AND I/O MANAGEMENT @@ -6443,7 +6643,7 @@ assumptions about what filehandles are available. =cut sub warn { - my ($msg) = join ("", @_); + my ($msg) = join( "", @_ ); $msg .= ": $!\n" unless $msg =~ /\n$/; local $\ = ''; print $OUT $msg; @@ -6463,19 +6663,19 @@ sub reset_IN_OUT { my $switch_li = $LINEINFO eq $OUT; # If there's a term and it's able to get a new tty, try to get one. - if ($term and $term->Features->{newTTY}) { - ($IN, $OUT) = (shift, shift); - $term->newTTY($IN, $OUT); + if ( $term and $term->Features->{newTTY} ) { + ( $IN, $OUT ) = ( shift, shift ); + $term->newTTY( $IN, $OUT ); } # This term can't get a new tty now. Better luck later. elsif ($term) { &warn("Too late to set IN/OUT filehandles, enabled on next `R'!\n"); - } + } # Set the filehndles up as they were. else { - ($IN, $OUT) = (shift, shift); + ( $IN, $OUT ) = ( shift, shift ); } # Unbuffer the output filehandle. @@ -6505,37 +6705,39 @@ we go ahead and set C<$console> and C<$tty> to the file indicated. =cut sub TTY { - if (@_ and $term and $term->Features->{newTTY}) { + if ( @_ and $term and $term->Features->{newTTY} ) { + # This terminal supports switching to a new TTY. # Can be a list of two files, or on string containing both names, # comma-separated. # XXX Should this perhaps be an assignment from @_? - my ($in, $out) = shift; - if ($in =~ /,/) { + my ( $in, $out ) = shift; + if ( $in =~ /,/ ) { + # Split list apart if supplied. - ($in, $out) = split /,/, $in, 2; - } - else { + ( $in, $out ) = split /,/, $in, 2; + } + else { + # Use the same file for both input and output. - $out = $in; - } + $out = $in; + } # Open file onto the debugger's filehandles, if you can. - open IN, $in or die "cannot open `$in' for read: $!"; - open OUT, ">$out" or die "cannot open `$out' for write: $!"; + open IN, $in or die "cannot open `$in' for read: $!"; + open OUT, ">$out" or die "cannot open `$out' for write: $!"; # Swap to the new filehandles. - reset_IN_OUT(\*IN,\*OUT); + reset_IN_OUT( \*IN, \*OUT ); # Save the setting for later. - return $tty = $in; + return $tty = $in; } ## end if (@_ and $term and $term... # Terminal doesn't support new TTY, or doesn't support readline. # Can't do it now, try restarting. &warn("Too late to set TTY, enabled on next `R'!\n") if $term and @_; - - # Useful if done through PERLDB_OPTS: + # Useful if done through PERLDB_OPTS: $console = $tty = shift if @_; @@ -6600,13 +6802,13 @@ false. Returns false if the current terminal doesn't support C. =cut sub tkRunning { - if (${ $term->Features }{tkRunning}) { + if ( ${ $term->Features }{tkRunning} ) { return $term->tkRunning(@_); - } + } else { - local $\ = ''; - print $OUT "tkRunning not supported by current ReadLine package.\n"; - 0; + local $\ = ''; + print $OUT "tkRunning not supported by current ReadLine package.\n"; + 0; } } ## end sub tkRunning @@ -6619,46 +6821,47 @@ debugger remembers the setting in case you restart, though. sub NonStop { if ($term) { - &warn("Too late to set up NonStop mode, enabled on next `R'!\n") + &warn("Too late to set up NonStop mode, enabled on next `R'!\n") if @_; } $runnonstop = shift if @_; $runnonstop; } ## end sub NonStop - sub DollarCaretP { if ($term) { - &warn("Some flag changes could not take effect until next 'R'!\n") if @_; + &warn("Some flag changes could not take effect until next 'R'!\n") + if @_; } $^P = parse_DollarCaretP_flags(shift) if @_; - expand_DollarCaretP_flags($^P) + expand_DollarCaretP_flags($^P); } sub OnlyAssertions { if ($term) { - &warn("Too late to set up OnlyAssertions mode, enabled on next 'R'!\n") if @_; + &warn("Too late to set up OnlyAssertions mode, enabled on next 'R'!\n") + if @_; } if (@_) { - unless (defined $ini_assertion) { - if ($term) { - &warn("Current Perl interpreter doesn't support assertions"); + unless ( defined $ini_assertion ) { + if ($term) { + &warn("Current Perl interpreter doesn't support assertions"); + } + return 0; } - return 0; - } - if (shift) { - unless ($ini_assertion) { - print "Assertions will be active on next 'R'!\n"; - $ini_assertion=1; + if (shift) { + unless ($ini_assertion) { + print "Assertions will be active on next 'R'!\n"; + $ini_assertion = 1; + } + $^P &= ~$DollarCaretP_flags{PERLDBf_SUB}; + $^P |= $DollarCaretP_flags{PERLDBf_ASSERTION}; + } + else { + $^P |= $DollarCaretP_flags{PERLDBf_SUB}; } - $^P&= ~$DollarCaretP_flags{PERLDBf_SUB}; - $^P|=$DollarCaretP_flags{PERLDBf_ASSERTION}; - } - else { - $^P|=$DollarCaretP_flags{PERLDBf_SUB}; - } } - !($^P & $DollarCaretP_flags{PERLDBf_SUB}) || 0; + !( $^P & $DollarCaretP_flags{PERLDBf_SUB} ) || 0; } =head2 C @@ -6671,7 +6874,7 @@ there already. sub pager { if (@_) { $pager = shift; - $pager="|".$pager unless $pager =~ /^(\+?\>|\|)/; + $pager = "|" . $pager unless $pager =~ /^(\+?\>|\|)/; } $pager; } ## end sub pager @@ -6693,10 +6896,10 @@ sub shellBang { } # Generate the printable version for the help: - $psh = $sh; # copy it - $psh =~ s/\\b$//; # Take off trailing \b if any - $psh =~ s/\\(.)/$1/g; # De-escape - $psh; # return the printable version + $psh = $sh; # copy it + $psh =~ s/\\b$//; # Take off trailing \b if any + $psh =~ s/\\(.)/$1/g; # De-escape + $psh; # return the printable version } ## end sub shellBang =head2 C @@ -6708,19 +6911,20 @@ ornaments.) =cut sub ornaments { - if (defined $term) { + if ( defined $term ) { + # We don't want to show warning backtraces, but we do want die() ones. - local ($warnLevel,$dieLevel) = (0, 1); + local ( $warnLevel, $dieLevel ) = ( 0, 1 ); # No ornaments if the terminal doesn't support them. - return '' unless $term->Features->{ornaments}; - eval { $term->ornaments(@_) } || ''; - } + return '' unless $term->Features->{ornaments}; + eval { $term->ornaments(@_) } || ''; + } # Use what was passed in if we can't determine it ourselves. else { - $ornaments = shift; - } + $ornaments = shift; + } } ## end sub ornaments =head2 C @@ -6740,10 +6944,10 @@ sub recallCommand { } # Build it into a printable version. - $prc = $rc; # Copy it - $prc =~ s/\\b$//; # Remove trailing \b - $prc =~ s/\\(.)/$1/g; # Remove escapes - $prc; # Return the printable version + $prc = $rc; # Copy it + $prc =~ s/\\b$//; # Remove trailing \b + $prc =~ s/\\(.)/$1/g; # Remove escapes + $prc; # Return the printable version } ## end sub recallCommand =head2 C - where the line number information goes @@ -6760,15 +6964,15 @@ sub LineInfo { return $lineinfo unless @_; $lineinfo = shift; - # If this is a valid "thing to be opened for output", tack a + # If this is a valid "thing to be opened for output", tack a # '>' onto the front. - my $stream = ($lineinfo =~ /^(\+?\>|\|)/) ? $lineinfo : ">$lineinfo"; + my $stream = ( $lineinfo =~ /^(\+?\>|\|)/ ) ? $lineinfo : ">$lineinfo"; # If this is a pipe, the stream points to a slave editor. - $slave_editor = ($stream =~ /^\|/); + $slave_editor = ( $stream =~ /^\|/ ); # Open it up and unbuffer it. - open(LINEINFO, "$stream") || &warn("Cannot open `$stream' for write"); + open( LINEINFO, "$stream" ) || &warn("Cannot open `$stream' for write"); $LINEINFO = \*LINEINFO; my $save = select($LINEINFO); $| = 1; @@ -6791,30 +6995,32 @@ information for output. =cut +sub list_modules { # versions + my %version; + my $file; -sub list_modules { # versions - my %version; - my $file; # keys are the "as-loaded" name, values are the fully-qualified path # to the file itself. - for (keys %INC) { - $file = $_; - s,\.p[lm]$,,i ; - s,/,::,g ; - s/^perl5db$/DB/; - s/^Term::ReadLine::readline$/readline/; + for ( keys %INC ) { + $file = $_; # get the module name + s,\.p[lm]$,,i; # remove '.pl' or '.pm' + s,/,::,g; # change '/' to '::' + s/^perl5db$/DB/; # Special case: debugger + # moves to package DB + s/^Term::ReadLine::readline$/readline/; # simplify readline + # If the package has a $VERSION package global (as all good packages # should!) decode it and save as partial message. - if (defined ${ $_ . '::VERSION' }) { - $version{$file} = "${ $_ . '::VERSION' } from "; - } + if ( defined ${ $_ . '::VERSION' } ) { + $version{$file} = "${ $_ . '::VERSION' } from "; + } # Finish up the message with the file the package came from. - $version{$file} .= $INC{$file}; + $version{$file} .= $INC{$file}; } ## end for (keys %INC) # Hey, dumpit() formats a hash nicely, so why not use it? - dumpit($OUT,\%version); + dumpit( $OUT, \%version ); } ## end sub list_modules =head2 C @@ -6846,9 +7052,9 @@ sub sethelp { # eeevil ornaments enabled. This is an insane mess. $help = " -Help is currently only available for the new 580 CommandSet, -if you really want old behaviour, presumably you know what -you're doing ?-) +Help is currently only available for the new 5.8 command set. +No help is available for the old command set. +We assume you know what you're doing if you switch to it. B Stack trace. B [I] Single step [in I]. @@ -6910,23 +7116,23 @@ B I<*> Delete all watch-expressions. B [I [I]] List some (default all) variables in package (default current). Use B<~>I and BI for positive and negative regexps. B [I] Same as \"B I [I]\". -B [I [I]] List lexicals in higher scope . Vars same as B. B I Evals expression in list context, dumps the result. B I Evals expression in list context, prints methods callable on the first element of the result. B I Prints methods callable via the given class. B Show versions of loaded modules. B I Prints nested parents of given class. -B [I [I]] List lexical variables I levels up from current sub +B [I [I]] List lexicals in higher scope . Vars same as B. +B

Something to do with assertions... B<<> ? List Perl commands to run before each prompt. B<<> I Define Perl command to run before each prompt. B<<<> I Add to the list of Perl commands to run before each prompt. -B<< *> Delete the list of perl commands to run before each prompt. +B<< *> Delete the list of perl commands to run before each prompt. B<>> ? List Perl commands to run after each prompt. B<>> I Define Perl command to run after each prompt. B<>>B<>> I Add to the list of Perl commands to run after each prompt. -B<>>B< *> Delete the list of Perl commands to run after each prompt. +B<>>B< *> Delete the list of Perl commands to run after each prompt. B<{> I Define debugger command to run before each prompt. B<{> ? List debugger commands to run before each prompt. B<{{> I Add to the list of debugger commands to run before each prompt. @@ -6936,17 +7142,17 @@ B<$prc> I<-number> Redo number'th-to-last command. B<$prc> I Redo last command that started with I. See 'B I' too. B<$psh$psh> I Run cmd in a subprocess (reads from DB::IN, writes to DB::OUT)" - . ( - $rc eq $sh - ? "" - : " -B<$psh> [I] Run I in subshell (forces \"\$SHELL -c 'cmd'\")." - ) - . " + . ( + $rc eq $sh + ? "" + : " +B<$psh> [I] Run I in subshell (forces \"\$SHELL -c 'cmd'\")." + ) . " See 'B I' too. B I Execute I containing debugger commands (may nest). B I Save current debugger session (actual history) to I. B I<-number> Display last number commands (default all). +B I<*> Delete complete history. B

I Same as \"I\" in current package. B<|>I Run debugger command, piping DB::OUT to current pager. B<||>I Same as B<|>I but DB::OUT is temporarilly select()ed as well. @@ -7002,7 +7208,7 @@ B<$doccmd> I Runs the external doc viewer B<$doccmd> command on the Type `|h h' for a paged display if this was too hard to read. -"; # Fix balance of vi % matching: }}}} +"; # Fix balance of vi % matching: }}}} # note: tabs in the following section are not-so-helpful $summary = <<"END_SUM"; @@ -7032,6 +7238,7 @@ I B Execute perl code, also see: B,B,B B [I [I]] List lexicals in higher scope . Vars same as B. For more help, type B I, or run B<$doccmd perldebug> for all docs. END_SUM + # ')}}; # Fix balance of vi % matching # and this is really numb... @@ -7039,7 +7246,7 @@ END_SUM B Stack trace. B [I] Single step [in I]. B [I] Next, steps over subroutine calls [in I]. -> Repeat last B or B command. +B> Repeat last B or B command. B Return from current subroutine. B [I|I] Continue; optionally inserts a one-time-only breakpoint at the specified position. @@ -7111,13 +7318,12 @@ B<$prc> I<-number> Redo number'th-to-last command. B<$prc> I Redo last command that started with I. See 'B I' too. B<$psh$psh> I Run cmd in a subprocess (reads from DB::IN, writes to DB::OUT)" - . ( - $rc eq $sh - ? "" - : " + . ( + $rc eq $sh + ? "" + : " B<$psh> [I] Run I in subshell (forces \"\$SHELL -c 'cmd'\")." - ) . - " + ) . " See 'B I' too. B I Execute I containing debugger commands (may nest). B I<-number> Display last number commands (default all). @@ -7176,7 +7382,7 @@ B<$doccmd> I Runs the external doc viewer B<$doccmd> command on the Type `|h' for a paged display if this was too hard to read. -"; # Fix balance of vi % matching: }}}} +"; # Fix balance of vi % matching: }}}} # note: tabs in the following section are not-so-helpful $pre580_summary = <<"END_SUM"; @@ -7206,7 +7412,7 @@ I B Execute perl code, also see: B,B,B For more help, type B I, or run B<$doccmd perldebug> for all docs. END_SUM - # ')}}; # Fix balance of vi % matching + # ')}}; # Fix balance of vi % matching } ## end sub sethelp @@ -7229,40 +7435,40 @@ sub print_help { # the first tab sequence padded into a field 16 (or if indented 20) # wide. If it's wider than that, an extra space will be added. s{ - ^ # only matters at start of line - ( \040{4} | \t )* # some subcommands are indented - ( < ? # so works - [BI] < [^\t\n] + ) # find an eeevil ornament - ( \t+ ) # original separation, discarded - ( .* ) # this will now start (no earlier) than - # column 16 + ^ # only matters at start of line + ( \040{4} | \t )* # some subcommands are indented + ( < ? # so works + [BI] < [^\t\n] + ) # find an eeevil ornament + ( \t+ ) # original separation, discarded + ( .* ) # this will now start (no earlier) than + # column 16 } { - my($leadwhite, $command, $midwhite, $text) = ($1, $2, $3, $4); - my $clean = $command; - $clean =~ s/[BI]<([^>]*)>/$1/g; + my($leadwhite, $command, $midwhite, $text) = ($1, $2, $3, $4); + my $clean = $command; + $clean =~ s/[BI]<([^>]*)>/$1/g; - # replace with this whole string: - ($leadwhite ? " " x 4 : "") + # replace with this whole string: + ($leadwhite ? " " x 4 : "") . $command . ((" " x (16 + ($leadwhite ? 4 : 0) - length($clean))) || " ") . $text; }mgex; - s{ # handle bold ornaments - B < ( [^>] + | > ) > + s{ # handle bold ornaments + B < ( [^>] + | > ) > } { - $Term::ReadLine::TermCap::rl_term_set[2] - . $1 - . $Term::ReadLine::TermCap::rl_term_set[3] + $Term::ReadLine::TermCap::rl_term_set[2] + . $1 + . $Term::ReadLine::TermCap::rl_term_set[3] }gex; - s{ # handle italic ornaments - I < ( [^>] + | > ) > + s{ # handle italic ornaments + I < ( [^>] + | > ) > } { - $Term::ReadLine::TermCap::rl_term_set[0] - . $1 - . $Term::ReadLine::TermCap::rl_term_set[1] + $Term::ReadLine::TermCap::rl_term_set[0] + . $1 + . $Term::ReadLine::TermCap::rl_term_set[1] }gex; local $\ = ''; @@ -7284,21 +7490,22 @@ sub fix_less { # Pager is less for sure. my $is_less = $pager =~ /\bless\b/; - if ($pager =~ /\bmore\b/) { + if ( $pager =~ /\bmore\b/ ) { + # Nope, set to more. See what's out there. - my @st_more = stat('/usr/bin/more'); - my @st_less = stat('/usr/bin/less'); + my @st_more = stat('/usr/bin/more'); + my @st_less = stat('/usr/bin/less'); # is it really less, pretending to be more? - $is_less = @st_more && @st_less - && $st_more[0] == $st_less[0] - && $st_more[1] == $st_less[1]; + $is_less = @st_more + && @st_less + && $st_more[0] == $st_less[0] + && $st_more[1] == $st_less[1]; } ## end if ($pager =~ /\bmore\b/) - + # changes environment! # 'r' added so we don't do (slow) stats again. - # changes environment! - $ENV{LESS} .= 'r' if $is_less; + $ENV{LESS} .= 'r' if $is_less; } ## end sub fix_less =head1 DIE AND WARN MANAGEMENT @@ -7314,6 +7521,7 @@ program, debugger, and everything to die. =cut sub diesignal { + # No entry/exit messages. local $frame = 0; @@ -7328,16 +7536,17 @@ sub diesignal { kill 'ABRT', $$ if $panic++; # If we can show detailed info, do so. - if (defined &Carp::longmess) { + if ( defined &Carp::longmess ) { + # Don't recursively enter the warn handler, since we're carping. - local $SIG{__WARN__} = ''; + local $SIG{__WARN__} = ''; - # Skip two levels before reporting traceback: we're skipping - # mydie and confess. - local $Carp::CarpLevel = 2; # mydie + confess + # Skip two levels before reporting traceback: we're skipping + # mydie and confess. + local $Carp::CarpLevel = 2; # mydie + confess # Tell us all about it. - &warn(Carp::longmess("Signal @_")); + &warn( Carp::longmess("Signal @_") ); } # No Carp. Tell us about the signal as best we can. @@ -7357,46 +7566,46 @@ be able to get a stack trace, and output the warning message vi C. =cut +sub dbwarn { -sub dbwarn { - # No entry/exit trace. - local $frame = 0; + # No entry/exit trace. + local $frame = 0; # No return value printing. - local $doret = -2; + local $doret = -2; # Turn off warn and die handling to prevent recursive entries to this # routine. - local $SIG{__WARN__} = ''; - local $SIG{__DIE__} = ''; + local $SIG{__WARN__} = ''; + local $SIG{__DIE__} = ''; # Load Carp if we can. If $^S is false (current thing being compiled isn't # done yet), we may not be able to do a require. - eval { require Carp } - if defined $^S; # If error/warning during compilation, - # require may be broken. + eval { require Carp } + if defined $^S; # If error/warning during compilation, + # require may be broken. # Use the core warn() unless Carp loaded OK. - CORE::warn(@_, - "\nCannot print stack trace, load with -MCarp option to see stack"), - return - unless defined &Carp::longmess; + CORE::warn( @_, + "\nCannot print stack trace, load with -MCarp option to see stack" ), + return + unless defined &Carp::longmess; # Save the current values of $single and $trace, and then turn them off. - my ($mysingle, $mytrace) = ($single, $trace); - $single = 0; - $trace = 0; + my ( $mysingle, $mytrace ) = ( $single, $trace ); + $single = 0; + $trace = 0; - # We can call Carp::longmess without its being "debugged" (which we + # We can call Carp::longmess without its being "debugged" (which we # don't want - we just want to use it!). Capture this for later. - my $mess = Carp::longmess(@_); + my $mess = Carp::longmess(@_); # Restore $single and $trace to their original values. - ($single,$trace) = ($mysingle,$mytrace); + ( $single, $trace ) = ( $mysingle, $mytrace ); # Use the debugger's own special way of printing warnings to print # the stack trace message. - &warn($mess); + &warn($mess); } ## end sub dbwarn =head2 C @@ -7413,46 +7622,46 @@ displaying the exception via its C routine. =cut - sub dbdie { - local $frame = 0; - local $doret = -2; - local $SIG{__DIE__} = ''; - local $SIG{__WARN__} = ''; - my $i = 0; my $ineval = 0; my $sub; - if ($dieLevel > 2) { - local $SIG{__WARN__} = \&dbwarn; - &warn(@_); # Yell no matter what - return; - } - if ($dieLevel < 2) { - die @_ if $^S; # in eval propagate - } + local $frame = 0; + local $doret = -2; + local $SIG{__DIE__} = ''; + local $SIG{__WARN__} = ''; + my $i = 0; + my $ineval = 0; + my $sub; + if ( $dieLevel > 2 ) { + local $SIG{__WARN__} = \&dbwarn; + &warn(@_); # Yell no matter what + return; + } + if ( $dieLevel < 2 ) { + die @_ if $^S; # in eval propagate + } # The code used to check $^S to see if compiliation of the current thing # hadn't finished. We don't do it anymore, figuring eval is pretty stable. - # No need to check $^S, eval is much more robust nowadays - eval { require Carp }; #if defined $^S;# If error/warning during compilation, - # require may be broken. + eval { require Carp }; - die(@_, "\nCannot print stack trace, load with -MCarp option to see stack") - unless defined &Carp::longmess; + die( @_, + "\nCannot print stack trace, load with -MCarp option to see stack" ) + unless defined &Carp::longmess; # We do not want to debug this chunk (automatic disabling works # inside DB::DB, but not in Carp). Save $single and $trace, turn them off, # get the stack trace from Carp::longmess (if possible), restore $signal # and $trace, and then die with the stack trace. - my ($mysingle, $mytrace) = ($single, $trace); - $single = 0; - $trace = 0; - my $mess = "@_"; - { - - package Carp; # Do not include us in the list - eval { $mess = Carp::longmess(@_); }; - } - ($single, $trace) = ($mysingle, $mytrace); - die $mess; + my ( $mysingle, $mytrace ) = ( $single, $trace ); + $single = 0; + $trace = 0; + my $mess = "@_"; + { + + package Carp; # Do not include us in the list + eval { $mess = Carp::longmess(@_); }; + } + ( $single, $trace ) = ( $mysingle, $mytrace ); + die $mess; } ## end sub dbdie =head2 C @@ -7466,17 +7675,17 @@ being debugged in place. =cut sub warnLevel { - if (@_) { - $prevwarn = $SIG{__WARN__} unless $warnLevel; - $warnLevel = shift; - if ($warnLevel) { - $SIG{__WARN__} = \&DB::dbwarn; - } - elsif ($prevwarn) { - $SIG{__WARN__} = $prevwarn; - } + if (@_) { + $prevwarn = $SIG{__WARN__} unless $warnLevel; + $warnLevel = shift; + if ($warnLevel) { + $SIG{__WARN__} = \&DB::dbwarn; + } + elsif ($prevwarn) { + $SIG{__WARN__} = $prevwarn; + } } ## end if (@_) - $warnLevel; + $warnLevel; } ## end sub warnLevel =head2 C @@ -7488,35 +7697,36 @@ zero lets you use your own C handler. =cut sub dieLevel { - local $\ = ''; - if (@_) { - $prevdie = $SIG{__DIE__} unless $dieLevel; - $dieLevel = shift; - if ($dieLevel) { + local $\ = ''; + if (@_) { + $prevdie = $SIG{__DIE__} unless $dieLevel; + $dieLevel = shift; + if ($dieLevel) { + # Always set it to dbdie() for non-zero values. - $SIG{__DIE__} = \&DB::dbdie; # if $dieLevel < 2; + $SIG{__DIE__} = \&DB::dbdie; # if $dieLevel < 2; - # No longer exists, so don't try to use it. - #$SIG{__DIE__} = \&DB::diehard if $dieLevel >= 2; + # No longer exists, so don't try to use it. + #$SIG{__DIE__} = \&DB::diehard if $dieLevel >= 2; # If we've finished initialization, mention that stack dumps # are enabled, If dieLevel is 1, we won't stack dump if we die # in an eval(). - print $OUT "Stack dump during die enabled", - ($dieLevel == 1 ? " outside of evals" : ""), ".\n" - if $I_m_init; + print $OUT "Stack dump during die enabled", + ( $dieLevel == 1 ? " outside of evals" : "" ), ".\n" + if $I_m_init; # XXX This is probably obsolete, given that diehard() is gone. - print $OUT "Dump printed too.\n" if $dieLevel > 2; + print $OUT "Dump printed too.\n" if $dieLevel > 2; } ## end if ($dieLevel) # Put the old one back if there was one. - elsif ($prevdie) { - $SIG{__DIE__} = $prevdie; - print $OUT "Default die handler restored.\n"; - } + elsif ($prevdie) { + $SIG{__DIE__} = $prevdie; + print $OUT "Default die handler restored.\n"; + } } ## end if (@_) - $dieLevel; + $dieLevel; } ## end sub dieLevel =head2 C @@ -7528,20 +7738,20 @@ takes over and handles them with C. =cut sub signalLevel { - if (@_) { - $prevsegv = $SIG{SEGV} unless $signalLevel; - $prevbus = $SIG{BUS} unless $signalLevel; - $signalLevel = shift; - if ($signalLevel) { - $SIG{SEGV} = \&DB::diesignal; - $SIG{BUS} = \&DB::diesignal; - } - else { - $SIG{SEGV} = $prevsegv; - $SIG{BUS} = $prevbus; - } + if (@_) { + $prevsegv = $SIG{SEGV} unless $signalLevel; + $prevbus = $SIG{BUS} unless $signalLevel; + $signalLevel = shift; + if ($signalLevel) { + $SIG{SEGV} = \&DB::diesignal; + $SIG{BUS} = \&DB::diesignal; + } + else { + $SIG{SEGV} = $prevsegv; + $SIG{BUS} = $prevbus; + } } ## end if (@_) - $signalLevel; + $signalLevel; } ## end sub signalLevel =head1 SUBROUTINE DECODING SUPPORT @@ -7561,9 +7771,9 @@ reference is stringified, it'll come out as "SOMETHING(0X...)"). =cut sub CvGV_name { - my $in = shift; - my $name = CvGV_name_or_bust($in); - defined $name ? $name : $in; + my $in = shift; + my $name = CvGV_name_or_bust($in); + defined $name ? $name : $in; } =head2 C I @@ -7577,13 +7787,13 @@ Returns "I::I" if the code ref is found in a glob. =cut sub CvGV_name_or_bust { - my $in = shift; - return if $skipCvGV; # Backdoor to avoid problems if XS broken... - return unless ref $in; - $in = \&$in; # Hard reference... - eval { require Devel::Peek; 1 } or return; - my $gv = Devel::Peek::CvGV($in) or return; - *$gv{PACKAGE} . '::' . *$gv{NAME}; + my $in = shift; + return if $skipCvGV; # Backdoor to avoid problems if XS broken... + return unless ref $in; + $in = \&$in; # Hard reference... + eval { require Devel::Peek; 1 } or return; + my $gv = Devel::Peek::CvGV($in) or return; + *$gv{PACKAGE} . '::' . *$gv{NAME}; } ## end sub CvGV_name_or_bust =head2 C @@ -7599,21 +7809,21 @@ this way, it brute-force searches X<%sub>, checking for identical references. =cut sub find_sub { - my $subr = shift; - $sub{$subr} or do { - return unless defined &$subr; - my $name = CvGV_name_or_bust($subr); - my $data; - $data = $sub{$name} if defined $name; - return $data if defined $data; - - # Old stupid way... - $subr = \&$subr; # Hard reference - my $s; - for (keys %sub) { - $s = $_, last if $subr eq \&$_; - } - $sub{$s} if $s; + my $subr = shift; + $sub{$subr} or do { + return unless defined &$subr; + my $name = CvGV_name_or_bust($subr); + my $data; + $data = $sub{$name} if defined $name; + return $data if defined $data; + + # Old stupid way... + $subr = \&$subr; # Hard reference + my $s; + for ( keys %sub ) { + $s = $_, last if $subr eq \&$_; + } + $sub{$s} if $s; } ## end do } ## end sub find_sub @@ -7629,15 +7839,16 @@ sub methods { # Figure out the class - either this is the class or it's a reference # to something blessed into that class. - my $class = shift; - $class = ref $class if ref $class; + my $class = shift; + $class = ref $class if ref $class; - local %seen; - local %packs; + local %seen; # Show the methods that this class has. - methods_via($class, '', 1); - methods_via('UNIVERSAL', 'UNIVERSAL', 0); + methods_via( $class, '', 1 ); + + # Show the methods that UNIVERSAL has. + methods_via( 'UNIVERSAL', 'UNIVERSAL', 0 ); } ## end sub methods =head2 C @@ -7651,41 +7862,48 @@ higher in the C<@ISA> tree, 0 if we should stop. =cut sub methods_via { + # If we've processed this class already, just quit. - my $class = shift; - return if $packs{$class}++; + my $class = shift; + return if $seen{$class}++; + + # This is a package that is contributing the methods we're about to print. + my $prefix = shift; + my $prepend = $prefix ? "via $prefix: " : ''; - # This is a package that is contributing the methods we're about to print. - my $prefix = shift; - my $prepend = $prefix ? "via $prefix: " : ''; + my $name; + for $name ( - my $name; - for $name ( # Keep if this is a defined subroutine in this class. - grep {defined &{${"${class}::"}{$_}}} - # Extract from all the symbols in this class. - sort keys %{"${class}::"} - ) { + grep { defined &{ ${"${class}::"}{$_} } } + + # Extract from all the symbols in this class. + sort keys %{"${class}::"} + ) + { + # If we printed this already, skip it. - next if $seen{ $name }++; - + next if $seen{$name}++; + # Print the new method name. - local $\ = ''; - local $, = ''; - print $DB::OUT "$prepend$name\n"; + local $\ = ''; + local $, = ''; + print $DB::OUT "$prepend$name\n"; } ## end for $name (grep { defined... # If the $crawl_upward argument is false, just quit here. - return unless shift; # Recurse? + return unless shift; # $crawl_upward true: keep going up the tree. # Find all the classes this one is a subclass of. - for $name (@{"${class}::ISA"}) { + for $name ( @{"${class}::ISA"} ) { + # Set up the new prefix. - $prepend = $prefix ? $prefix . " -> $name" : $name; - # Crawl up the tree and keep trying to crawl up. - methods_via($name, $prepend, 1); - } + $prepend = $prefix ? $prefix . " -> $name" : $name; + + # Crawl up the tree and keep trying to crawl up. + methods_via( $name, $prepend, 1 ); + } } ## end sub methods_via =head2 C - figure out which command to use to show documentation @@ -7696,8 +7914,8 @@ Just checks the contents of C<$^O> and sets the C<$doccmd> global accordingly. sub setman { $doccmd = $^O !~ /^(?:MSWin32|VMS|os2|dos|amigaos|riscos|MacOS|NetWare)\z/s - ? "man" # O Happy Day! - : "perldoc"; # Alas, poor unfortunates + ? "man" # O Happy Day! + : "perldoc"; # Alas, poor unfortunates } ## end sub setman =head2 C - run the appropriate command to show documentation @@ -7708,7 +7926,6 @@ program's STDIN and STDOUT. =cut - sub runman { my $page = shift; unless ($page) { @@ -7718,7 +7935,7 @@ sub runman { # this way user can override, like with $doccmd="man -Mwhatever" # or even just "man " to disable the path check. - unless ($doccmd eq 'man') { + unless ( $doccmd eq 'man' ) { &system("$doccmd $page"); return; } @@ -7728,7 +7945,7 @@ sub runman { require Config; my $man1dir = $Config::Config{'man1dir'}; my $man3dir = $Config::Config{'man3dir'}; - for ($man1dir, $man3dir) { s#/[^/]*\z## if /\S/ } + for ( $man1dir, $man3dir ) { s#/[^/]*\z## if /\S/ } my $manpath = ''; $manpath .= "$man1dir:" if $man1dir =~ /\S/; $manpath .= "$man3dir:" if $man3dir =~ /\S/ && $man1dir ne $man3dir; @@ -7740,40 +7957,40 @@ sub runman { my $nopathopt = $^O =~ /dunno what goes here/; if ( CORE::system( - $doccmd, + $doccmd, - # I just *know* there are men without -M - (($manpath && !$nopathopt) ? ("-M", $manpath) : ()), - split ' ', $page + # I just *know* there are men without -M + ( ( $manpath && !$nopathopt ) ? ( "-M", $manpath ) : () ), + split ' ', $page ) - ) + ) { - unless ($page =~ /^perl\w/) { - if ( - grep { $page eq $_ } - qw{ - 5004delta 5005delta amiga api apio book boot bot call compile - cygwin data dbmfilter debug debguts delta diag doc dos dsc embed - faq faq1 faq2 faq3 faq4 faq5 faq6 faq7 faq8 faq9 filter fork - form func guts hack hist hpux intern ipc lexwarn locale lol mod - modinstall modlib number obj op opentut os2 os390 pod port - ref reftut run sec style sub syn thrtut tie toc todo toot tootc - trap unicode var vms win32 xs xstut - } - ) - { - $page =~ s/^/perl/; - CORE::system($doccmd, - (($manpath && !$nopathopt) ? ("-M", $manpath) : ()), - $page); + unless ( $page =~ /^perl\w/ ) { + if ( + grep { $page eq $_ } + qw{ + 5004delta 5005delta amiga api apio book boot bot call compile + cygwin data dbmfilter debug debguts delta diag doc dos dsc embed + faq faq1 faq2 faq3 faq4 faq5 faq6 faq7 faq8 faq9 filter fork + form func guts hack hist hpux intern ipc lexwarn locale lol mod + modinstall modlib number obj op opentut os2 os390 pod port + ref reftut run sec style sub syn thrtut tie toc todo toot tootc + trap unicode var vms win32 xs xstut + } + ) + { + $page =~ s/^/perl/; + CORE::system( $doccmd, + ( ( $manpath && !$nopathopt ) ? ( "-M", $manpath ) : () ), + $page ); } ## end if (grep { $page eq $_... } ## end unless ($page =~ /^perl\w/) } ## end if (CORE::system($doccmd... - if (defined $oldpath) { - $ENV{MANPATH} = $manpath; + if ( defined $oldpath ) { + $ENV{MANPATH} = $manpath; } else { - delete $ENV{MANPATH}; + delete $ENV{MANPATH}; } } ## end sub runman @@ -7819,68 +8036,68 @@ debugger has to have set up before the Perl core starts running: # The following BEGIN is very handy if debugger goes havoc, debugging debugger? -BEGIN { # This does not compile, alas. - $IN = \*STDIN; # For bugs before DB::OUT has been opened - $OUT = \*STDERR; # For errors before DB::OUT has been opened +BEGIN { # This does not compile, alas. (XXX eh?) + $IN = \*STDIN; # For bugs before DB::OUT has been opened + $OUT = \*STDERR; # For errors before DB::OUT has been opened - # Define characters used by command parsing. - $sh = '!'; # Shell escape (does not work) - $rc = ','; # Recall command (does not work) - @hist = ('?'); # Show history (does not work) - @truehist=(); # Can be saved for replay (per session) + # Define characters used by command parsing. + $sh = '!'; # Shell escape (does not work) + $rc = ','; # Recall command (does not work) + @hist = ('?'); # Show history (does not work) + @truehist = (); # Can be saved for replay (per session) - # This defines the point at which you get the 'deep recursion' + # This defines the point at which you get the 'deep recursion' # warning. It MUST be defined or the debugger will not load. - $deep = 100; + $deep = 100; - # Number of lines around the current one that are shown in the + # Number of lines around the current one that are shown in the # 'w' command. - $window = 10; + $window = 10; # How much before-the-current-line context the 'v' command should # use in calculating the start of the window it will display. - $preview = 3; + $preview = 3; # We're not in any sub yet, but we need this to be a defined value. - $sub = ''; + $sub = ''; - # Set up the debugger's interrupt handler. It simply sets a flag + # Set up the debugger's interrupt handler. It simply sets a flag # ($signal) that DB::DB() will check before each command is executed. - $SIG{INT} = \&DB::catch; + $SIG{INT} = \&DB::catch; # The following lines supposedly, if uncommented, allow the debugger to - # debug itself. Perhaps we can try that someday. + # debug itself. Perhaps we can try that someday. # This may be enabled to debug debugger: - #$warnLevel = 1 unless defined $warnLevel; - #$dieLevel = 1 unless defined $dieLevel; - #$signalLevel = 1 unless defined $signalLevel; + #$warnLevel = 1 unless defined $warnLevel; + #$dieLevel = 1 unless defined $dieLevel; + #$signalLevel = 1 unless defined $signalLevel; # This is the flag that says "a debugger is running, please call # DB::DB and DB::sub". We will turn it on forcibly before we try to # execute anything in the user's context, because we always want to # get control back. - $db_stop = 0; # Compiler warning - $db_stop = 1 << 30; + $db_stop = 0; # Compiler warning ... + $db_stop = 1 << 30; # ... because this is only used in an eval() later. # This variable records how many levels we're nested in debugging. Used - # Used in the debugger prompt, and in determining whether it's all over or + # Used in the debugger prompt, and in determining whether it's all over or # not. - $level = 0; # Level of recursive debugging + $level = 0; # Level of recursive debugging # "Triggers bug (?) in perl if we postpone this until runtime." # XXX No details on this yet, or whether we should fix the bug instead - # of work around it. Stay tuned. - @postponed = @stack = (0); + # of work around it. Stay tuned. + @postponed = @stack = (0); # Used to track the current stack depth using the auto-stacked-variable # trick. - $stack_depth = 0; # Localized repeatedly; simple way to track $#stack + $stack_depth = 0; # Localized repeatedly; simple way to track $#stack # Don't print return values on exiting a subroutine. - $doret = -2; + $doret = -2; # No extry/exit tracing. - $frame = 0; + $frame = 0; } ## end BEGIN @@ -7908,14 +8125,14 @@ sub db_complete { # $text is the text to be completed. # $line is the incoming line typed by the user. # $start is the start of the text to be completed in the incoming line. - my ($text, $line, $start) = @_; + my ( $text, $line, $start ) = @_; # Save the initial text. # The search pattern is current package, ::, extract the next qualifier # Prefix and pack are set to undef. - my ($itext, $search, $prefix, $pack) = - ($text, "^\Q${'package'}::\E([^:]+)\$"); - + my ( $itext, $search, $prefix, $pack ) = + ( $text, "^\Q${'package'}::\E([^:]+)\$" ); + =head3 C =over 4 @@ -7934,10 +8151,10 @@ sub db_complete { =cut - return sort grep /^\Q$text/, (keys %sub), - qw(postpone load compile), # subroutines - (map { /$search/ ? ($1) : () } keys %sub) - if (substr $line, 0, $start) =~ /^\|*[blc]\s+((postpone|compile)\s+)?$/; + return sort grep /^\Q$text/, ( keys %sub ), + qw(postpone load compile), # subroutines + ( map { /$search/ ? ($1) : () } keys %sub ) + if ( substr $line, 0, $start ) =~ /^\|*[blc]\s+((postpone|compile)\s+)?$/; =head3 C @@ -7946,8 +8163,8 @@ select the ones that match the text so far. =cut - return sort grep /^\Q$text/, values %INC # files - if (substr $line, 0, $start) =~ /^\|*b\s+load\s+$/; + return sort grep /^\Q$text/, values %INC # files + if ( substr $line, 0, $start ) =~ /^\|*b\s+load\s+$/; =head3 C (list variable) and C (list modules) @@ -7961,9 +8178,9 @@ get all possible matching packages. Return this sorted list. =cut - return sort map {($_, db_complete($_ . "::", "V ", 2))} - grep /^\Q$text/, map { /^(.*)::$/ ? ($1) : ()} keys %:: # top-packages - if (substr $line, 0, $start) =~ /^\|*[Vm]\s+$/ and $text =~ /^\w*$/; + return sort map { ( $_, db_complete( $_ . "::", "V ", 2 ) ) } + grep /^\Q$text/, map { /^(.*)::$/ ? ($1) : () } keys %:: # top-packages + if ( substr $line, 0, $start ) =~ /^\|*[Vm]\s+$/ and $text =~ /^\w*$/; =head4 Qualified package names @@ -7974,12 +8191,12 @@ start with 'main::'. Return this list. =cut - return sort map { ($_, db_complete($_ . "::", "V ", 2))} - grep !/^main::/, grep /^\Q$text/, - map { /^(.*)::$/ ? ($prefix . "::$1") : () } keys %{ $prefix . '::' } - if (substr $line, 0, $start) =~ /^\|*[Vm]\s+$/ - and $text =~ /^(.*[^:])::?(\w*)$/ - and $prefix = $1; + return sort map { ( $_, db_complete( $_ . "::", "V ", 2 ) ) } + grep !/^main::/, grep /^\Q$text/, + map { /^(.*)::$/ ? ( $prefix . "::$1" ) : () } keys %{ $prefix . '::' } + if ( substr $line, 0, $start ) =~ /^\|*[Vm]\s+$/ + and $text =~ /^(.*[^:])::?(\w*)$/ + and $prefix = $1; =head3 C - switch files @@ -7998,12 +8215,12 @@ Possibilities are: =cut - if ( $line =~ /^\|*f\s+(.*)/ ) { # Loaded files - # We might possibly want to switch to an eval (which has a "filename" - # like '(eval 9)'), so we may need to clean up the completion text - # before proceeding. - $prefix = length($1) - length($text); - $text = $1; + if ( $line =~ /^\|*f\s+(.*)/ ) { # Loaded files + # We might possibly want to switch to an eval (which has a "filename" + # like '(eval 9)'), so we may need to clean up the completion text + # before proceeding. + $prefix = length($1) - length($text); + $text = $1; =pod @@ -8014,9 +8231,9 @@ match the completion text so far. =cut - return sort - map { substr $_, 2 + $prefix } grep /^_<\Q$text/, (keys %main::), - $0; + return sort + map { substr $_, 2 + $prefix } grep /^_<\Q$text/, ( keys %main:: ), + $0; } ## end if ($line =~ /^\|*f\s+(.*)/) =head3 Subroutine name completion @@ -8027,14 +8244,14 @@ all the matches qualified to the current package. =cut - if ((substr $text, 0, 1) eq '&') { # subroutines - $text = substr $text, 1; - $prefix = "&"; - return sort map "$prefix$_", grep /^\Q$text/, (keys %sub), + if ( ( substr $text, 0, 1 ) eq '&' ) { # subroutines + $text = substr $text, 1; + $prefix = "&"; + return sort map "$prefix$_", grep /^\Q$text/, ( keys %sub ), ( map { /$search/ ? ($1) : () } - keys %sub - ); + keys %sub + ); } ## end if ((substr $text, 0, ... =head3 Scalar, array, and hash completion: partially qualified package @@ -8043,7 +8260,7 @@ Much like the above, except we have to do a little more cleanup: =cut - if ($text =~ /^[\$@%](.*)::(.*)/) { # symbols in a package + if ( $text =~ /^[\$@%](.*)::(.*)/ ) { # symbols in a package =pod @@ -8053,7 +8270,7 @@ Much like the above, except we have to do a little more cleanup: =cut - $pack = ($1 eq 'main' ? '' : $1) . '::'; + $pack = ( $1 eq 'main' ? '' : $1 ) . '::'; =pod @@ -8061,8 +8278,8 @@ Much like the above, except we have to do a little more cleanup: =cut - $prefix = (substr $text, 0, 1) . $1 . '::'; - $text = $2; + $prefix = ( substr $text, 0, 1 ) . $1 . '::'; + $text = $2; =pod @@ -8070,8 +8287,8 @@ Much like the above, except we have to do a little more cleanup: =cut - my @out = map "$prefix$_", grep /^\Q$text/, grep /^_?[a-zA-Z]/, - keys %$pack; + my @out = map "$prefix$_", grep /^\Q$text/, grep /^_?[a-zA-Z]/, + keys %$pack; =pod @@ -8079,12 +8296,12 @@ Much like the above, except we have to do a little more cleanup: =cut - if (@out == 1 and $out[0] =~ /::$/ and $out[0] ne $itext) { - return db_complete($out[0], $line, $start); - } + if ( @out == 1 and $out[0] =~ /::$/ and $out[0] ne $itext ) { + return db_complete( $out[0], $line, $start ); + } # Return the list of possibles. - return sort @out; + return sort @out; } ## end if ($text =~ /^[\$@%](.*)::(.*)/) @@ -8096,8 +8313,7 @@ Much like the above, except we have to do a little more cleanup: =cut - - if ($text =~ /^[\$@%]/) { # symbols (in $package + packages in main) + if ( $text =~ /^[\$@%]/ ) { # symbols (in $package + packages in main) =pod @@ -8107,7 +8323,7 @@ Much like the above, except we have to do a little more cleanup: =cut - $pack = ($package eq 'main' ? '' : $package) . '::'; + $pack = ( $package eq 'main' ? '' : $package ) . '::'; =pod @@ -8115,8 +8331,8 @@ Much like the above, except we have to do a little more cleanup: =cut - $prefix = substr $text, 0, 1; - $text = substr $text, 1; + $prefix = substr $text, 0, 1; + $text = substr $text, 1; =pod @@ -8124,9 +8340,9 @@ Much like the above, except we have to do a little more cleanup: =cut - my @out = map "$prefix$_", grep /^\Q$text/, - (grep /^_?[a-zA-Z]/, keys %$pack), - ( $pack eq '::' ? () : (grep /::$/, keys %::) ) ; + my @out = map "$prefix$_", grep /^\Q$text/, + ( grep /^_?[a-zA-Z]/, keys %$pack ), + ( $pack eq '::' ? () : ( grep /::$/, keys %:: ) ); =item * If there's only one hit, it's a package qualifier, and it's not equal to the initial text, recomplete using this symbol. @@ -8134,12 +8350,12 @@ Much like the above, except we have to do a little more cleanup: =cut - if (@out == 1 and $out[0] =~ /::$/ and $out[0] ne $itext) { - return db_complete($out[0], $line, $start); - } + if ( @out == 1 and $out[0] =~ /::$/ and $out[0] ne $itext ) { + return db_complete( $out[0], $line, $start ); + } # Return the list of possibles. - return sort @out; + return sort @out; } ## end if ($text =~ /^[\$@%]/) =head3 Options @@ -8152,47 +8368,50 @@ question mark, which, if executed, will list the current value of the option. =cut - - if ((substr $line, 0, $start) =~ /^\|*O\b.*\s$/) { # Options after a space - # We look for the text to be matched in the list of possible options, - # and fetch the current value. - my @out = grep /^\Q$text/, @options; - my $val = option_val($out[0], undef); + if ( ( substr $line, 0, $start ) =~ /^\|*[oO]\b.*\s$/ ) + { # Options after space + # We look for the text to be matched in the list of possible options, + # and fetch the current value. + my @out = grep /^\Q$text/, @options; + my $val = option_val( $out[0], undef ); # Set up a 'query option's value' command. - my $out = '? '; - if (not defined $val or $val =~ /[\n\r]/) { - # There's really nothing else we can do. - } + my $out = '? '; + if ( not defined $val or $val =~ /[\n\r]/ ) { + + # There's really nothing else we can do. + } # We have a value. Create a proper option-setting command. - elsif ($val =~ /\s/) { + elsif ( $val =~ /\s/ ) { + # XXX This may be an extraneous variable. - my $found; + my $found; # We'll want to quote the string (because of the embedded # whtespace), but we want to make sure we don't end up with # mismatched quote characters. We try several possibilities. - foreach $l (split //, qq/\"\'\#\|/) { + foreach $l ( split //, qq/\"\'\#\|/ ) { + # If we didn't find this quote character in the value, # quote it using this quote character. - $out = "$l$val$l ", last if (index $val, $l) == -1; - } + $out = "$l$val$l ", last if ( index $val, $l ) == -1; + } } ## end elsif ($val =~ /\s/) # Don't need any quotes. - else { - $out = "=$val "; - } + else { + $out = "=$val "; + } # If there were multiple possible values, return '? ', which # makes the command into a query command. If there was just one, # have readline append that. - $rl_attribs->{completer_terminator_character} = - (@out == 1 ? $out : '? '); + $rl_attribs->{completer_terminator_character} = + ( @out == 1 ? $out : '? ' ); # Return list of possibilities. - return sort @out; + return sort @out; } ## end if ((substr $line, 0, ... =head3 Filename completion @@ -8202,7 +8421,7 @@ method with the completion text to get the possible completions. =cut - return $term->filename_list($text); # filenames + return $term->filename_list($text); # filenames } ## end sub db_complete @@ -8217,8 +8436,8 @@ Say we're done. =cut sub end_report { - local $\ = ''; - print $OUT "Use `q' to quit or `R' to restart. `h q' for details.\n" + local $\ = ''; + print $OUT "Use `q' to quit or `R' to restart. `h q' for details.\n"; } =head2 clean_ENV @@ -8229,75 +8448,82 @@ environment. Used by the C (restart) command. =cut sub clean_ENV { - if (defined($ini_pids)) { + if ( defined($ini_pids) ) { $ENV{PERLDB_PIDS} = $ini_pids; - } + } else { - delete($ENV{PERLDB_PIDS}); + delete( $ENV{PERLDB_PIDS} ); } } ## end sub clean_ENV # PERLDBf_... flag names from perl.h -our (%DollarCaretP_flags, %DollarCaretP_flags_r); +our ( %DollarCaretP_flags, %DollarCaretP_flags_r ); + BEGIN { - %DollarCaretP_flags = - ( PERLDBf_SUB => 0x01, # Debug sub enter/exit - PERLDBf_LINE => 0x02, # Keep line # - PERLDBf_NOOPT => 0x04, # Switch off optimizations - PERLDBf_INTER => 0x08, # Preserve more data - PERLDBf_SUBLINE => 0x10, # Keep subr source lines - PERLDBf_SINGLE => 0x20, # Start with single-step on - PERLDBf_NONAME => 0x40, # For _SUB: no name of the subr - PERLDBf_GOTO => 0x80, # Report goto: call DB::goto - PERLDBf_NAMEEVAL => 0x100, # Informative names for evals - PERLDBf_NAMEANON => 0x200, # Informative names for anon subs - PERLDBf_ASSERTION => 0x400, # Debug assertion subs enter/exit - PERLDB_ALL => 0x33f, # No _NONAME, _GOTO, _ASSERTION + %DollarCaretP_flags = ( + PERLDBf_SUB => 0x01, # Debug sub enter/exit + PERLDBf_LINE => 0x02, # Keep line # + PERLDBf_NOOPT => 0x04, # Switch off optimizations + PERLDBf_INTER => 0x08, # Preserve more data + PERLDBf_SUBLINE => 0x10, # Keep subr source lines + PERLDBf_SINGLE => 0x20, # Start with single-step on + PERLDBf_NONAME => 0x40, # For _SUB: no name of the subr + PERLDBf_GOTO => 0x80, # Report goto: call DB::goto + PERLDBf_NAMEEVAL => 0x100, # Informative names for evals + PERLDBf_NAMEANON => 0x200, # Informative names for anon subs + PERLDBf_ASSERTION => 0x400, # Debug assertion subs enter/exit + PERLDB_ALL => 0x33f, # No _NONAME, _GOTO, _ASSERTION ); - %DollarCaretP_flags_r=reverse %DollarCaretP_flags; + %DollarCaretP_flags_r = reverse %DollarCaretP_flags; } sub parse_DollarCaretP_flags { - my $flags=shift; - $flags=~s/^\s+//; - $flags=~s/\s+$//; - my $acu=0; - foreach my $f (split /\s*\|\s*/, $flags) { - my $value; - if ($f=~/^0x([[:xdigit:]]+)$/) { - $value=hex $1; - } - elsif ($f=~/^(\d+)$/) { - $value=int $1; - } - elsif ($f=~/^DEFAULT$/i) { - $value=$DollarCaretP_flags{PERLDB_ALL}; - } - else { - $f=~/^(?:PERLDBf_)?(.*)$/i; - $value=$DollarCaretP_flags{'PERLDBf_'.uc($1)}; - unless (defined $value) { - print $OUT ("Unrecognized \$^P flag '$f'!\n", - "Acceptable flags are: ". - join(', ', sort keys %DollarCaretP_flags), - ", and hexadecimal and decimal numbers.\n"); - return undef; - } - } - $acu|=$value; + my $flags = shift; + $flags =~ s/^\s+//; + $flags =~ s/\s+$//; + my $acu = 0; + foreach my $f ( split /\s*\|\s*/, $flags ) { + my $value; + if ( $f =~ /^0x([[:xdigit:]]+)$/ ) { + $value = hex $1; + } + elsif ( $f =~ /^(\d+)$/ ) { + $value = int $1; + } + elsif ( $f =~ /^DEFAULT$/i ) { + $value = $DollarCaretP_flags{PERLDB_ALL}; + } + else { + $f =~ /^(?:PERLDBf_)?(.*)$/i; + $value = $DollarCaretP_flags{ 'PERLDBf_' . uc($1) }; + unless ( defined $value ) { + print $OUT ( + "Unrecognized \$^P flag '$f'!\n", + "Acceptable flags are: " + . join( ', ', sort keys %DollarCaretP_flags ), + ", and hexadecimal and decimal numbers.\n" + ); + return undef; + } + } + $acu |= $value; } $acu; } sub expand_DollarCaretP_flags { - my $DollarCaretP=shift; - my @bits= ( map { my $n=(1<<$_); - ($DollarCaretP & $n) - ? ($DollarCaretP_flags_r{$n} - || sprintf('0x%x', $n)) - : () } 0..31 ); - return @bits ? join('|', @bits) : 0; + my $DollarCaretP = shift; + my @bits = ( + map { + my $n = ( 1 << $_ ); + ( $DollarCaretP & $n ) + ? ( $DollarCaretP_flags_r{$n} + || sprintf( '0x%x', $n ) ) + : () + } 0 .. 31 + ); + return @bits ? join( '|', @bits ) : 0; } =head1 END PROCESSING - THE C BLOCK @@ -8323,12 +8549,12 @@ break, run to completion.). =cut END { - $finished = 1 if $inhibit_exit; # So that some keys may be disabled. - $fall_off_end = 1 unless $inhibit_exit; + $finished = 1 if $inhibit_exit; # So that some commands may be disabled. + $fall_off_end = 1 unless $inhibit_exit; - # Do not stop in at_exit() and destructors on exit: - $DB::single = !$fall_off_end && !$runnonstop; - DB::fake::at_exit() unless $fall_off_end or $runnonstop; + # Do not stop in at_exit() and destructors on exit: + $DB::single = !$fall_off_end && !$runnonstop; + DB::fake::at_exit() unless $fall_off_end or $runnonstop; } ## end END =head1 PRE-5.8 COMMANDS @@ -8364,20 +8590,21 @@ sub cmd_pre580_a { my $cmd = shift; # Argument supplied. Add the action. - if ($cmd =~ /^(\d*)\s*(.*)/) { + if ( $cmd =~ /^(\d*)\s*(.*)/ ) { # If the line isn't there, use the current line. $i = $1 || $line; $j = $2; # If there is an action ... - if (length $j) { + if ( length $j ) { # ... but the line isn't breakable, skip it. - if ($dbline[$i] == 0) { + if ( $dbline[$i] == 0 ) { print $OUT "Line $i may not have an action.\n"; } else { + # ... and the line is breakable: # Mark that there's an action in this file. $had_breakpoints{$filename} |= 2; @@ -8392,8 +8619,11 @@ sub cmd_pre580_a { # No action supplied. else { + # Delete the action. $dbline{$i} =~ s/\0[^\0]*//; + + # Mark as having no break or action if nothing's left. delete $dbline{$i} if $dbline{$i} eq ''; } } ## end if ($cmd =~ /^(\d*)\s*(.*)/) @@ -8406,54 +8636,55 @@ Add breakpoints. =cut sub cmd_pre580_b { - my $xcmd = shift; + my $xcmd = shift; my $cmd = shift; my $dbline = shift; # Break on load. - if ($cmd =~ /^load\b\s*(.*)/) { + if ( $cmd =~ /^load\b\s*(.*)/ ) { my $file = $1; $file =~ s/\s+$//; &cmd_b_load($file); } # b compile|postpone [] - # The interpreter actually traps this one for us; we just put the + # The interpreter actually traps this one for us; we just put the # necessary condition in the %postponed hash. - elsif ($cmd =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/) { + elsif ( $cmd =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/ ) { + # Capture the condition if there is one. Make it true if none. my $cond = length $3 ? $3 : '1'; # Save the sub name and set $break to 1 if $1 was 'postpone', 0 # if it was 'compile'. - my ($subname, $break) = ($2, $1 eq 'postpone'); + my ( $subname, $break ) = ( $2, $1 eq 'postpone' ); # De-Perl4-ify the name - ' separators to ::. $subname =~ s/\'/::/g; # Qualify it into the current package unless it's already qualified. $subname = "${'package'}::" . $subname - unless $subname =~ /::/; + unless $subname =~ /::/; # Add main if it starts with ::. - $subname = "main" . $subname if substr($subname,0,2) eq "::"; + $subname = "main" . $subname if substr( $subname, 0, 2 ) eq "::"; # Save the break type for this sub. $postponed{$subname} = $break ? "break +0 if $cond" : "compile"; } ## end elsif ($cmd =~ ... - + # b [] - elsif ($cmd =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/) { + elsif ( $cmd =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/ ) { my $subname = $1; my $cond = length $2 ? $2 : '1'; - &cmd_b_sub($subname, $cond); - } + &cmd_b_sub( $subname, $cond ); + } # b []. - elsif ($cmd =~ /^(\d*)\s*(.*)/) { + elsif ( $cmd =~ /^(\d*)\s*(.*)/ ) { my $i = $1 || $dbline; my $cond = length $2 ? $2 : '1'; - &cmd_b_line($i, $cond); + &cmd_b_line( $i, $cond ); } } ## end sub cmd_pre580_b @@ -8466,26 +8697,30 @@ Delete all breakpoints unconditionally. sub cmd_pre580_D { my $xcmd = shift; my $cmd = shift; - if ($cmd =~ /^\s*$/) { + if ( $cmd =~ /^\s*$/ ) { print $OUT "Deleting all breakpoints...\n"; # %had_breakpoints lists every file that had at least one # breakpoint in it. my $file; - for $file (keys %had_breakpoints) { + for $file ( keys %had_breakpoints ) { + # Switch to the desired file temporarily. - local *dbline = $main::{'_<' . $file}; + local *dbline = $main::{ '_<' . $file }; my $max = $#dbline; my $was; # For all lines in this file ... - for ($i = 1; $i <= $max ; $i++) { + for ( $i = 1 ; $i <= $max ; $i++ ) { + # If there's a breakpoint or action on this line ... - if (defined $dbline{$i}) { + if ( defined $dbline{$i} ) { + # ... remove the breakpoint. $dbline{$i} =~ s/^[^\0]+//; - if ($dbline{$i} =~ s/^\0?$//) { + if ( $dbline{$i} =~ s/^\0?$// ) { + # Remove the entry altogether if no action is there. delete $dbline{$i}; } @@ -8493,9 +8728,9 @@ sub cmd_pre580_D { } ## end for ($i = 1 ; $i <= $max... # If, after we turn off the "there were breakpoints in this file" - # bit, the entry in %had_breakpoints for this file is zero, + # bit, the entry in %had_breakpoints for this file is zero, # we should remove this file from the hash. - if (not $had_breakpoints{$file} &= ~1) { + if ( not $had_breakpoints{$file} &= ~1 ) { delete $had_breakpoints{$file}; } } ## end for $file (keys %had_breakpoints) @@ -8520,25 +8755,28 @@ sub cmd_pre580_h { my $cmd = shift; # Print the *right* help, long format. - if ($cmd =~ /^\s*$/) { + if ( $cmd =~ /^\s*$/ ) { print_help($pre580_help); } - # 'h h' - explicitly-requested summary. - elsif ($cmd =~ /^h\s*/) { + # 'h h' - explicitly-requested summary. + elsif ( $cmd =~ /^h\s*/ ) { print_help($pre580_summary); } # Find and print a command's help. - elsif ($cmd =~ /^h\s+(\S.*)$/) { - my $asked = $1; # for proper errmsg - my $qasked = quotemeta($asked); # for searching - # XXX: finds CR but not - if ($pre580_help =~ /^ + elsif ( $cmd =~ /^h\s+(\S.*)$/ ) { + my $asked = $1; # for proper errmsg + my $qasked = quotemeta($asked); # for searching + # XXX: finds CR but not + if ( + $pre580_help =~ /^ , or {). @$aref = action($line); } } ## end if ( length($cmd) == 1) - elsif ( length($cmd) == 2 ) { + elsif ( length($cmd) == 2 ) { + # Add the action to the line. (This is a <<, >>, or {{). push @$aref, action($line); } else { + # <<<, >>>>, {{{{{{ ... something not a command. print $OUT "Confused by strange length of $which command($cmd)...\n"; @@ -8721,7 +8971,6 @@ sub cmd_prepost { } ## end else } ## end sub cmd_prepost - =head1 C Contains the C routine that the debugger uses to issue the @@ -8733,7 +8982,7 @@ the C block documentation for more details. package DB::fake; sub at_exit { - "Debugged program terminated. Use `q' to quit or `R' to restart."; + "Debugged program terminated. Use `q' to quit or `R' to restart."; } package DB; # Do not trace this 1; below! -- 2.7.4