From e1a0240a3d6840b497845680c2bf6753415ba20f Mon Sep 17 00:00:00 2001 From: Alan Coopersmith Date: Fri, 16 Sep 2011 22:11:38 -0700 Subject: [PATCH] Strip trailing whitespace Performed with: find * -type f | xargs perl -i -p -e 's{[ \t]+$}{}' git diff -w & git diff -b show no diffs from this change Signed-off-by: Alan Coopersmith --- Makefile.am | 2 +- configure.ac | 2 +- include/pciaccess.h | 14 +- src/Doxyfile | 1016 +++++++++++++++++++++++----------------------- src/Makefile.am | 2 +- src/common_bridge.c | 10 +- src/common_capability.c | 10 +- src/common_device_name.c | 28 +- src/common_init.c | 12 +- src/common_interface.c | 48 +-- src/common_io.c | 2 +- src/common_iterator.c | 30 +- src/freebsd_pci.c | 14 +- src/linux_devmem.c | 18 +- src/linux_devmem.h | 2 +- src/linux_sysfs.c | 42 +- src/netbsd_pci.c | 2 +- src/pciaccess_private.h | 10 +- 18 files changed, 632 insertions(+), 632 deletions(-) diff --git a/Makefile.am b/Makefile.am index a285275..fc47966 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,4 +1,4 @@ -# +# # (C) Copyright IBM Corporation 2006 # All Rights Reserved. # diff --git a/configure.ac b/configure.ac index 3c5ab56..caaf358 100644 --- a/configure.ac +++ b/configure.ac @@ -122,7 +122,7 @@ AC_CHECK_MEMBER([struct pci_io.pi_sel.pc_domain], AC_SUBST(PCIACCESS_CFLAGS) AC_SUBST(PCIACCESS_LIBS) - + AC_CONFIG_FILES([Makefile include/Makefile man/Makefile diff --git a/include/pciaccess.h b/include/pciaccess.h index 88515e2..00ae6de 100644 --- a/include/pciaccess.h +++ b/include/pciaccess.h @@ -50,7 +50,7 @@ /** * \file pciaccess.h - * + * * \author Ian Romanick */ @@ -62,7 +62,7 @@ #if __GNUC__ >= 3 #define __deprecated __attribute__((deprecated)) #else -#define __deprecated +#define __deprecated #endif typedef uint64_t pciaddr_t; @@ -193,7 +193,7 @@ int pci_device_cfg_write_bits(struct pci_device *dev, uint32_t mask, struct pci_id_match { /** * \name Device / vendor matching controls - * + * * Control the search based on the device, vendor, subdevice, or subvendor * IDs. Setting any of these fields to \c PCI_MATCH_ANY will cause the * field to not be used in the comparison. @@ -208,7 +208,7 @@ struct pci_id_match { /** * \name Device class matching controls - * + * */ /*@{*/ uint32_t device_class; @@ -261,7 +261,7 @@ struct pci_mem_region { * This address is really only useful to other devices in the same * domain. It's probably \b not the address applications will ever * use. - * + * * \warning * Most (all?) platform back-ends leave this field unset. */ @@ -270,7 +270,7 @@ struct pci_mem_region { /** * Base physical address of the region from the CPU's point of view. - * + * * This address is typically passed to \c pci_device_map_range to create * a mapping of the region to the CPU's virtual address space. */ @@ -468,7 +468,7 @@ struct pci_pcmcia_bridge_info { uint8_t card_bus; uint8_t subordinate_bus; uint8_t cardbus_latency_timer; - + uint16_t secondary_status; uint16_t bridge_control; diff --git a/src/Doxyfile b/src/Doxyfile index 87a4123..1185875 100644 --- a/src/Doxyfile +++ b/src/Doxyfile @@ -14,198 +14,198 @@ # Project related configuration options #--------------------------------------------------------------------------- -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded # by quotes) that should identify the project. PROJECT_NAME = libpciaccess -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = +PROJECT_NUMBER = -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. -OUTPUT_DIRECTORY = +OUTPUT_DIRECTORY = -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would # otherwise cause performance problems for the file system. CREATE_SUBDIRS = NO -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, -# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, -# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, -# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, +# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, +# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, +# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, # Swedish, and Ukrainian. OUTPUT_LANGUAGE = English -# This tag can be used to specify the encoding used in the generated output. -# The encoding is not always determined by the language that is chosen, -# but also whether or not the output is meant for Windows or non-Windows users. -# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES -# forces the Windows encoding (this is the default for the Windows binary), -# whereas setting the tag to NO uses a Unix-style encoding (the default for +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for # all platforms other than Windows). USE_WINDOWS_ENCODING = NO -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). # Set to NO to disable this. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. REPEAT_BRIEF = YES -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" # "represents" "a" "an" "the" -ABBREVIATE_BRIEF = +ABBREVIATE_BRIEF = -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief # description. ALWAYS_DETAILED_SEC = NO -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set # to NO the shortest path that makes the file name unique will be used. FULL_PATH_NAMES = YES -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the # path to strip. -STRIP_FROM_PATH = +STRIP_FROM_PATH = -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that # are normally passed to the compiler using the -I flag. -STRIP_FROM_INC_PATH = +STRIP_FROM_INC_PATH = -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems # doesn't support long names like on DOS, Mac, or CD-ROM. SHORT_NAMES = NO -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an # explicit @brief command for a brief description. JAVADOC_AUTOBRIEF = NO -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed # description. Set this tag to YES if you prefer the old behaviour instead. MULTILINE_CPP_IS_BRIEF = NO -# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# If the DETAILS_AT_TOP tag is set to YES then Doxygen # will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member +# If set to NO, the detailed description appears after the member # documentation. DETAILS_AT_TOP = NO -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it # re-implements. INHERIT_DOCS = YES -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. DISTRIBUTE_GROUP_DOC = NO -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will # be part of the file/class/namespace that contains it. SEPARATE_MEMBER_PAGES = NO -# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. TAB_SIZE = 8 -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. -ALIASES = +ALIASES = -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = YES -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes # will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using # the \nosubgrouping command. SUBGROUPING = YES @@ -214,326 +214,326 @@ SUBGROUPING = YES # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES EXTRACT_ALL = NO -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. EXTRACT_PRIVATE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file +# If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. EXTRACT_STATIC = NO -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. EXTRACT_LOCAL_CLASSES = YES -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. # If set to NO (the default) only methods in the interface are included. EXTRACT_LOCAL_METHODS = NO -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_MEMBERS = NO -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = NO -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the # documentation. HIDE_FRIEND_COMPOUNDS = NO -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the # function's detailed documentation block. HIDE_IN_BODY_DOCS = NO -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. INTERNAL_DOCS = NO -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = YES -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = NO -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = YES -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. INLINE_INFO = YES -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in # declaration order. SORT_MEMBER_DOCS = YES -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in # declaration order. SORT_BRIEF_DOCS = NO -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the +# Note: This option applies only to the class list, not to the # alphabetical list. SORT_BY_SCOPE_NAME = NO -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test # commands in the documentation. GENERATE_TESTLIST = YES -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting # \deprecated commands in the documentation. GENERATE_DEPRECATEDLIST= YES -# The ENABLED_SECTIONS tag can be used to enable conditional +# The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. -ENABLED_SECTIONS = +ENABLED_SECTIONS = -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer # command in the documentation regardless of this setting. MAX_INITIALIZER_LINES = 30 -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy # in the documentation. The default is YES. SHOW_DIRECTORIES = YES -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from the -# version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the progam writes to standard output +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from the +# version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the progam writes to standard output # is used as the file version. See the manual for examples. -FILE_VERSION_FILTER = +FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- -# The QUIET tag can be used to turn on/off the messages that are generated +# The QUIET tag can be used to turn on/off the messages that are generated # by doxygen. Possible values are YES and NO. If left blank NO is used. QUIET = NO -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank # NO is used. WARNINGS = YES -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. WARN_IF_UNDOCUMENTED = YES -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that # don't exist or using markup commands wrongly. WARN_IF_DOC_ERROR = YES -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of # documentation. WARN_NO_PARAMDOC = NO -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could # be obtained via FILE_VERSION_FILTER) WARN_FORMAT = "$file:$line: $text" -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written # to stderr. -WARN_LOGFILE = +WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = +INPUT = -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm -FILE_PATTERNS = +FILE_PATTERNS = -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. RECURSIVE = NO -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. -EXCLUDE = +EXCLUDE = -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded # from the input. EXCLUDE_SYMLINKS = NO -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories # for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see # the \include command). -EXAMPLE_PATH = +EXAMPLE_PATH = -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left # blank all files are included. -EXAMPLE_PATTERNS = +EXAMPLE_PATTERNS = -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. EXAMPLE_RECURSIVE = NO -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see # the \image command). -IMAGE_PATH = +IMAGE_PATH = -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be # ignored. -INPUT_FILTER = +INPUT_FILTER = -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER # is applied to all files. -FILTER_PATTERNS = +FILTER_PATTERNS = -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). FILTER_SOURCE_FILES = NO @@ -542,46 +542,46 @@ FILTER_SOURCE_FILES = NO # configuration options related to source browsing #--------------------------------------------------------------------------- -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also # VERBATIM_HEADERS is set to NO. SOURCE_BROWSER = NO -# Setting the INLINE_SOURCES tag to YES will include the body +# Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. INLINE_SOURCES = NO -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code # fragments. Normal C and C++ comments will always remain visible. STRIP_CODE_COMMENTS = YES -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = YES -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities # called/used by that function will be listed. REFERENCES_RELATION = YES -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You # will need version 4.8.6 or higher. USE_HTAGS = NO -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. VERBATIM_HEADERS = YES @@ -590,133 +590,133 @@ VERBATIM_HEADERS = YES # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project # contains a lot of classes, structs, unions or interfaces. ALPHABETICAL_INDEX = NO -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # in which this list will be split (can be a number in the range [1..20]) COLS_IN_ALPHA_INDEX = 5 -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # should be ignored while generating the index headers. -IGNORE_PREFIX = +IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will # generate HTML output. GENERATE_HTML = YES -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `html' will be used as the default path. HTML_OUTPUT = html -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank # doxygen will generate files with .html extension. HTML_FILE_EXTENSION = .html -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a # standard header. -HTML_HEADER = +HTML_HEADER = -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a # standard footer. -HTML_FOOTER = +HTML_FOOTER = -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own # stylesheet in the HTML output directory as well, or it will be erased! -HTML_STYLESHEET = +HTML_STYLESHEET = -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to # NO a bullet list will be used. HTML_ALIGN_MEMBERS = YES -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = NO -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be # written to the html output directory. -CHM_FILE = +CHM_FILE = -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run # the HTML help compiler on the generated index.hhp. -HHC_LOCATION = +HHC_LOCATION = -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that # it should be included in the master .chm file (NO). GENERATE_CHI = NO -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. BINARY_TOC = NO -# The TOC_EXPAND flag can be set to YES to add extra items for group members +# The TOC_EXPAND flag can be set to YES to add extra items for group members # to the contents of the HTML help documentation and to the tree view. TOC_EXPAND = NO -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and # the value YES disables it. DISABLE_INDEX = NO -# This tag can be used to set the number of enum values (range [1..20]) +# This tag can be used to set the number of enum values (range [1..20]) # that doxygen will group on one line in the generated HTML documentation. ENUM_VALUES_PER_LINE = 4 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # probably better off using the HTML help feature. GENERATE_TREEVIEW = NO -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 @@ -725,74 +725,74 @@ TREEVIEW_WIDTH = 250 # configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. GENERATE_LATEX = YES -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `latex' will be used as the default path. LATEX_OUTPUT = latex -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. If left blank `latex' will be used as the default command name. LATEX_CMD_NAME = latex -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the # default command name. MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_LATEX = NO -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and # executive. If left blank a4wide will be used. PAPER_TYPE = a4wide -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. -EXTRA_PACKAGES = +EXTRA_PACKAGES = -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a # standard header. Notice: only use this tag if you know what you are doing! -LATEX_HEADER = +LATEX_HEADER = -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. PDF_HYPERLINKS = NO -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. USE_PDFLATEX = NO -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. # This option is also used when generating formulas in HTML. LATEX_BATCHMODE = NO -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) # in the output. LATEX_HIDE_INDICES = NO @@ -801,68 +801,68 @@ LATEX_HIDE_INDICES = NO # configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = NO -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `rtf' will be used as the default path. RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_RTF = NO -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. # Note: wordpad (write) and others do not support links. RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. -RTF_STYLESHEET_FILE = +RTF_STYLESHEET_FILE = -# Set optional variables used in the generation of an rtf document. +# Set optional variables used in the generation of an rtf document. # Syntax is similar to doxygen's config file. -RTF_EXTENSIONS_FILE = +RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will # generate man pages GENERATE_MAN = NO -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `man' will be used as the default path. MAN_OUTPUT = man -# The MAN_EXTENSION tag determines the extension that is added to +# The MAN_EXTENSION tag determines the extension that is added to # the generated man pages (default is the subroutine's section .3) MAN_EXTENSION = .3 -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command # would be unable to find the correct page. The default is NO. MAN_LINKS = NO @@ -871,33 +871,33 @@ MAN_LINKS = NO # configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of # the code including all documentation. GENERATE_XML = NO -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `xml' will be used as the default path. XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the # syntax of the XML files. -XML_SCHEMA = +XML_SCHEMA = -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the # syntax of the XML files. -XML_DTD = +XML_DTD = -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that # enabling this will significantly increase the size of the XML output. XML_PROGRAMLISTING = YES @@ -906,10 +906,10 @@ XML_PROGRAMLISTING = YES # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental # and incomplete at the moment. GENERATE_AUTOGEN_DEF = NO @@ -918,311 +918,311 @@ GENERATE_AUTOGEN_DEF = NO # configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the # moment. GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able # to generate PDF and DVI output from the Perl module output. PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller # and Perl will parse it just the same. PERLMOD_PRETTY = YES -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same # Makefile don't overwrite each other's variables. -PERLMOD_MAKEVAR_PREFIX = +PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- -# Configuration options related to the preprocessor +# Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include # files. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled # way by setting EXPAND_ONLY_PREDEF to YES. MACRO_EXPANSION = NO -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the # PREDEFINED and EXPAND_AS_PREDEFINED tags. EXPAND_ONLY_PREDEF = NO -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # in the INCLUDE_PATH (see below) will be search if a #include is found. SEARCH_INCLUDES = YES -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by # the preprocessor. -INCLUDE_PATH = +INCLUDE_PATH = -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. -INCLUDE_FILE_PATTERNS = +INCLUDE_FILE_PATTERNS = -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator # instead of the = operator. -PREDEFINED = +PREDEFINED = -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. # Use the PREDEFINED tag if you want to use a different macro definition. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse # the parser if not removed. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- -# Configuration::additions related to external references +# Configuration::additions related to external references #--------------------------------------------------------------------------- -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool # does not have to be run to correct the links. # Note that each tag file must have a unique name # (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen +# If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = +TAGFILES = -# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. -GENERATE_TAGFILE = +GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes # will be listed. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will # be listed. EXTERNAL_GROUPS = YES -# The PERL_PATH should be the absolute path and name of the perl script +# The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- -# Configuration options related to the dot tool +# Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more # powerful graphs. CLASS_DIAGRAMS = YES -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented # or is not a class. HIDE_UNDOC_RELATIONS = YES -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section # have no effect if this option is set to NO (the default) HAVE_DOT = NO -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the # the CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and # class references variables) of the class with other documented classes. COLLABORATION_GRAPH = YES -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen # will generate a graph for groups, showing the direct groups dependencies GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. UML_LOOK = NO -# If set to YES, the inheritance and collaboration graphs will show the +# If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. TEMPLATE_RELATIONS = NO -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with # other documented files. INCLUDE_GRAPH = YES -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or # indirectly include this file. INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected # functions only using the \callgraph command. CALL_GRAPH = NO -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. DIRECTORY_GRAPH = YES -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. Possible values are png, jpg, or gif # If left blank png will be used. DOT_IMAGE_FORMAT = png -# The tag DOT_PATH can be used to specify the path where the dot tool can be +# The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. -DOT_PATH = +DOT_PATH = -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the # \dotfile command). -DOTFILE_DIRS = +DOTFILE_DIRS = -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_WIDTH = 1024 -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_HEIGHT = 1024 -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that a graph may be further truncated if the graph's -# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH -# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that a graph may be further truncated if the graph's +# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH +# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), # the graph is not depth-constrained. MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, which results in a white background. -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, which results in a white background. +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to # read). DOT_TRANSPARENT = NO -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) # support this, this feature is disabled by default. DOT_MULTI_TARGETS = NO -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES #--------------------------------------------------------------------------- -# Configuration::additions related to the search engine +# Configuration::additions related to the search engine #--------------------------------------------------------------------------- -# The SEARCHENGINE tag specifies whether or not a search engine should be +# The SEARCHENGINE tag specifies whether or not a search engine should be # used. If set to NO the values of all tags below this one will be ignored. SEARCHENGINE = NO diff --git a/src/Makefile.am b/src/Makefile.am index 7842118..6f50ade 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -1,4 +1,4 @@ -# +# # (C) Copyright IBM Corporation 2006 # All Rights Reserved. # diff --git a/src/common_bridge.c b/src/common_bridge.c index 871c1f6..4a067b9 100644 --- a/src/common_bridge.c +++ b/src/common_bridge.c @@ -25,7 +25,7 @@ /** * \file common_bridge.c * Support routines used to process PCI header information for bridges. - * + * * \author Ian Romanick */ @@ -75,7 +75,7 @@ read_bridge_info( struct pci_device_private * priv ) info = malloc(sizeof(*info)); if (info != NULL) { - pci_device_cfg_read( (struct pci_device *) priv, buf + 0x18, 0x18, + pci_device_cfg_read( (struct pci_device *) priv, buf + 0x18, 0x18, 0x40 - 0x18, & bytes ); info->primary_bus = buf[0x18]; @@ -239,7 +239,7 @@ pci_device_get_pcmcia_bridge_info( struct pci_device * dev ) /** * Determine the primary, secondary, and subordinate buses for a bridge - * + * * Determines the IDs of the primary, secondary, and subordinate buses for * a specified bridge. Not all bridges directly store this information * (e.g., PCI-to-ISA bridges). For those bridges, no error is returned, but @@ -252,7 +252,7 @@ pci_device_get_pcmcia_bridge_info( struct pci_device * dev ) * \return * On success, zero is returned. If \c dev is not a bridge, \c ENODEV is * returned. - * + * * \bug * Host bridges are handled the same way as PCI-to-ISA bridges. This is * almost certainly not correct. @@ -265,7 +265,7 @@ pci_device_get_bridge_buses(struct pci_device * dev, int *primary_bus, /* If the device isn't a bridge, return an error. */ - + if (((dev->device_class >> 16) & 0x0ff) != 0x06) { return ENODEV; } diff --git a/src/common_capability.c b/src/common_capability.c index 3963db1..488743d 100644 --- a/src/common_capability.c +++ b/src/common_capability.c @@ -25,7 +25,7 @@ /** * \file common_capability.c * Platform independent PCI capability related routines. - * + * * In addition to including the interface glue for \c pci_device_get_agp_info, * this file also contains a generic implementation of that function. * @@ -51,7 +51,7 @@ * Once more than just the AGP capability is supported, the body of each of * the cases in the capability processing loop should probably be broken out * into its own function. - * + * * \todo * Once more than just the AGP capability is supported, some care will need * to be taken in partial failure cases. If, say, the first capability is @@ -79,7 +79,7 @@ pci_fill_capabilities_generic( struct pci_device * dev ) if ( (status & 0x0010) == 0 ) { return ENOSYS; } - + err = pci_device_cfg_read_u8( dev, & cap_offset, 52 ); if ( err ) { return err; @@ -101,7 +101,7 @@ pci_fill_capabilities_generic( struct pci_device * dev ) if ( err ) { return err; } - + switch ( cap_id ) { case 2: { struct pci_agp_info * agp_info; @@ -187,7 +187,7 @@ pci_device_get_agp_info( struct pci_device * dev ) if ( dev == NULL ) { return NULL; } - + if ( dev_priv->agp == NULL ) { (void) (*pci_sys->methods->fill_capabilities)( dev ); } diff --git a/src/common_device_name.c b/src/common_device_name.c index 896a8a3..8e8a752 100644 --- a/src/common_device_name.c +++ b/src/common_device_name.c @@ -77,7 +77,7 @@ typedef FILE pci_id_file; /** * Node for sorting vendor IDs. - * + * * Each structure forms an internal node of an n-way tree. Each node selects * \c pci_id_node::bits number of bits from the vendor ID. Starting from the * root of the tree, a slice of the low-order bits of the vendor ID are @@ -86,7 +86,7 @@ typedef FILE pci_id_file; * At the leaf nodes (i.e., the node entered when all 16 bits of the vendor ID * have been used), the \c pci_id_node::children is actually an array of * pointers to \c pci_id_leaf structures. - * + * * \todo * Determine if there is a cleaner way (in the source code) to have the * \c children array change type based on whether the node is internal or @@ -105,7 +105,7 @@ struct pci_id_node { struct pci_id_leaf { uint16_t vendor; const char * vendor_name; - + size_t num_devices; struct pci_device_leaf * devices; }; @@ -122,7 +122,7 @@ _pci_hidden struct pci_id_node * tree = NULL; /** * Get a pointer to the leaf node for a vendor ID. - * + * * If the vendor ID does not exist in the tree, it is added. */ static struct pci_id_leaf * @@ -159,7 +159,7 @@ insert( uint16_t vendor ) n->children[ idx ] = child; } else { - struct pci_id_leaf * leaf = + struct pci_id_leaf * leaf = calloc( 1, sizeof( struct pci_id_leaf ) ); leaf->vendor = vendor; @@ -177,9 +177,9 @@ insert( uint16_t vendor ) /** * Populate a vendor node with all the devices associated with that vendor - * + * * \param vend Vendor node that is to be filled from the pci.ids file. - * + * * \todo * The parsing in this function should be more rhobust. There are some error * cases (i.e., a 0-tab line followed by a 2-tab line) that aren't handled @@ -202,7 +202,7 @@ populate_vendor( struct pci_id_leaf * vend, int fill_device_data ) } f = pci_id_file_open(); - + /* If the pci.ids file could not be opened, there's nothing we can do. */ if (f == NULL) { @@ -223,14 +223,14 @@ populate_vendor( struct pci_id_leaf * vend, int fill_device_data ) break; } } - + if ( !isxdigit( buf[ num_tabs + 0 ] ) || !isxdigit( buf[ num_tabs + 1 ] ) || !isxdigit( buf[ num_tabs + 2 ] ) || !isxdigit( buf[ num_tabs + 3 ] ) ) { continue; } - + new_line = strchr( buf, '\n' ); if ( new_line != NULL ) { *new_line = '\0'; @@ -263,7 +263,7 @@ populate_vendor( struct pci_id_leaf * vend, int fill_device_data ) struct pci_device_leaf * d; struct pci_device_leaf * dev; struct pci_device_leaf * last_dev; - + d = realloc( vend->devices, (vend->num_devices + 1) @@ -279,7 +279,7 @@ populate_vendor( struct pci_id_leaf * vend, int fill_device_data ) if ( num_tabs == 1 ) { dev->id.vendor_id = vend->vendor; - dev->id.device_id = (unsigned) strtoul( & buf[ num_tabs ], + dev->id.device_id = (unsigned) strtoul( & buf[ num_tabs ], NULL, 16 ); dev->id.subvendor_id = PCI_MATCH_ANY; dev->id.subdevice_id = PCI_MATCH_ANY; @@ -295,13 +295,13 @@ populate_vendor( struct pci_id_leaf * vend, int fill_device_data ) dev->id.subvendor_id= (unsigned) strtoul( & buf[ num_tabs ], NULL, 16 ); - dev->id.subdevice_id = (unsigned) strtoul( & buf[ num_tabs + 5 ], + dev->id.subdevice_id = (unsigned) strtoul( & buf[ num_tabs + 5 ], NULL, 16 ); dev->device_name = strdup( & buf[ num_tabs + 5 + 6 ] ); } } } - + pci_id_file_close( f ); } diff --git a/src/common_init.c b/src/common_init.c index 89c56ad..5e91c27 100644 --- a/src/common_init.c +++ b/src/common_init.c @@ -39,7 +39,7 @@ _pci_hidden struct pci_system * pci_sys; /** * Initialize the PCI subsystem for access. - * + * * \return * Zero on success or an errno value on failure. In particular, if no * platform-specific initializers are available, \c ENOSYS will be returned. @@ -51,7 +51,7 @@ int pci_system_init( void ) { int err = ENOSYS; - + #ifdef linux err = pci_system_linux_sysfs_create(); #elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) @@ -79,7 +79,7 @@ pci_system_init_dev_mem(int fd) /** * Shutdown all access to the PCI subsystem. - * + * * \sa pci_system_init */ void @@ -103,7 +103,7 @@ pci_system_cleanup( void ) free( (char *) pci_sys->devices[i].device_string ); free( (char *) pci_sys->devices[i].agp ); - + pci_sys->devices[i].device_string = NULL; pci_sys->devices[i].agp = NULL; @@ -111,7 +111,7 @@ pci_system_cleanup( void ) (*pci_sys->methods->destroy_device)( & pci_sys->devices[i].base ); } } - + free( pci_sys->devices ); pci_sys->devices = NULL; pci_sys->num_devices = 0; @@ -121,7 +121,7 @@ pci_system_cleanup( void ) if ( pci_sys->methods->destroy != NULL ) { (*pci_sys->methods->destroy)(); } - + free( pci_sys ); pci_sys = NULL; } diff --git a/src/common_interface.c b/src/common_interface.c index 4af772a..94a0d21 100644 --- a/src/common_interface.c +++ b/src/common_interface.c @@ -86,14 +86,14 @@ /** * Read a device's expansion ROM. - * + * * Reads the device's expansion ROM and stores the data in the memory pointed * to by \c buffer. The buffer must be at least \c pci_device::rom_size * bytes. * * \param dev Device whose expansion ROM is to be read. * \param buffer Memory in which to store the ROM. - * + * * \return * Zero on success or an \c errno value on failure. */ @@ -125,7 +125,7 @@ pci_device_is_boot_vga( struct pci_device * dev ) /** * Probe a PCI device to determine if a kernel driver is attached. - * + * * \param dev Device to query * \return * Zero if no driver attached, 1 if attached kernel drviver @@ -140,14 +140,14 @@ pci_device_has_kernel_driver( struct pci_device * dev ) /** * Probe a PCI device to learn information about the device. - * + * * Probes a PCI device to learn various information about the device. Before * calling this function, the only public fields in the \c pci_device * structure that have valid values are \c pci_device::domain, * \c pci_device::bus, \c pci_device::dev, and \c pci_device::func. - * + * * \param dev Device to be probed. - * + * * \return * Zero on success or an \c errno value on failure. */ @@ -173,7 +173,7 @@ pci_device_probe( struct pci_device * dev ) * \param dev Device whose memory region is to be mapped. * \param region Region, on the range [0, 5], that is to be mapped. * \param write_enable Map for writing (non-zero). - * + * * \return * Zero on success or an \c errno value on failure. * @@ -194,7 +194,7 @@ pci_device_map_region(struct pci_device * dev, unsigned region, if (dev->regions[region].memory != NULL) { return 0; } - + return pci_device_map_range(dev, dev->regions[region].base_addr, dev->regions[region].size, map_flags, &dev->regions[region].memory); @@ -213,7 +213,7 @@ pci_device_map_region(struct pci_device * dev, unsigned region, * \param size Size of the range to be mapped. * \param write_enable Map for writing (non-zero). * \param addr Location to store the mapped address. - * + * * \return * Zero on success or an \c errno value on failure. * @@ -241,7 +241,7 @@ int pci_device_map_memory_range(struct pci_device *dev, * \param size Size of the range to be mapped. * \param map_flags Flag bits controlling how the mapping is accessed. * \param addr Location to store the mapped address. - * + * * \return * Zero on success or an \c errno value on failure. * @@ -335,7 +335,7 @@ pci_device_map_range(struct pci_device *dev, pciaddr_t base, * * \param dev Device whose memory region is to be mapped. * \param region Region, on the range [0, 5], that is to be mapped. - * + * * \return * Zero on success or an \c errno value on failure. * @@ -374,7 +374,7 @@ pci_device_unmap_region( struct pci_device * dev, unsigned region ) * \param dev Device whose memory is to be unmapped. * \param memory Pointer to the base of the mapped range. * \param size Size, in bytes, of the range to be unmapped. - * + * * \return * Zero on success or an \c errno value on failure. * @@ -398,7 +398,7 @@ pci_device_unmap_memory_range(struct pci_device *dev, void *memory, * \param dev Device whose memory is to be unmapped. * \param memory Pointer to the base of the mapped range. * \param size Size, in bytes, of the range to be unmapped. - * + * * \return * Zero on success or an \c errno value on failure. * @@ -429,17 +429,17 @@ pci_device_unmap_range(struct pci_device *dev, void *memory, return ENOENT; } - + err = (*pci_sys->methods->unmap_range)(dev, &devp->mappings[i]); if (!err) { const unsigned entries_to_move = (devp->num_mappings - i) - 1; - + if (entries_to_move > 0) { (void) memmove(&devp->mappings[i], &devp->mappings[i + 1], entries_to_move * sizeof(devp->mappings[0])); } - + devp->num_mappings--; devp->mappings = realloc(devp->mappings, (sizeof(devp->mappings[0]) * devp->num_mappings)); @@ -474,7 +474,7 @@ pci_device_unmap_range(struct pci_device *dev, void *memory, */ int pci_device_cfg_read( struct pci_device * dev, void * data, - pciaddr_t offset, pciaddr_t size, + pciaddr_t offset, pciaddr_t size, pciaddr_t * bytes_read ) { pciaddr_t scratch; @@ -484,7 +484,7 @@ pci_device_cfg_read( struct pci_device * dev, void * data, } return pci_sys->methods->read( dev, data, offset, size, - (bytes_read == NULL) + (bytes_read == NULL) ? & scratch : bytes_read ); } @@ -495,7 +495,7 @@ pci_device_cfg_read_u8( struct pci_device * dev, uint8_t * data, { pciaddr_t bytes; int err = pci_device_cfg_read( dev, data, offset, 1, & bytes ); - + if ( (err == 0) && (bytes != 1) ) { err = ENXIO; } @@ -510,7 +510,7 @@ pci_device_cfg_read_u16( struct pci_device * dev, uint16_t * data, { pciaddr_t bytes; int err = pci_device_cfg_read( dev, data, offset, 2, & bytes ); - + if ( (err == 0) && (bytes != 2) ) { err = ENXIO; } @@ -561,7 +561,7 @@ pci_device_cfg_read_u32( struct pci_device * dev, uint32_t * data, */ int pci_device_cfg_write( struct pci_device * dev, const void * data, - pciaddr_t offset, pciaddr_t size, + pciaddr_t offset, pciaddr_t size, pciaddr_t * bytes_written ) { pciaddr_t scratch; @@ -571,7 +571,7 @@ pci_device_cfg_write( struct pci_device * dev, const void * data, } return pci_sys->methods->write( dev, data, offset, size, - (bytes_written == NULL) + (bytes_written == NULL) ? & scratch : bytes_written ); } @@ -590,7 +590,7 @@ pci_device_cfg_write_u8(struct pci_device *dev, uint8_t data, return err; } - + int pci_device_cfg_write_u16(struct pci_device *dev, uint16_t data, @@ -627,7 +627,7 @@ pci_device_cfg_write_u32(struct pci_device *dev, uint32_t data, int -pci_device_cfg_write_bits( struct pci_device * dev, uint32_t mask, +pci_device_cfg_write_bits( struct pci_device * dev, uint32_t mask, uint32_t data, pciaddr_t offset ) { uint32_t temp; diff --git a/src/common_io.c b/src/common_io.c index 58628b4..f1319f8 100644 --- a/src/common_io.c +++ b/src/common_io.c @@ -109,7 +109,7 @@ pci_device_open_io(struct pci_device *dev, pciaddr_t base, pciaddr_t size) ret = new_io_handle(); if (!ret) return NULL; - + if (!pci_sys->methods->open_device_io(ret, dev, bar, base, size)) { delete_io_handle(ret); return NULL; diff --git a/src/common_iterator.c b/src/common_iterator.c index 83cade3..ccf656d 100644 --- a/src/common_iterator.c +++ b/src/common_iterator.c @@ -25,7 +25,7 @@ /** * \file common_iterator.c * Platform independent iterator support routines. - * + * * \author Ian Romanick */ @@ -37,7 +37,7 @@ /** * Track device iteration state - * + * * \private */ struct pci_device_iterator { @@ -69,7 +69,7 @@ struct pci_device_iterator * pci_slot_match_iterator_create( const struct pci_slot_match * match ) { struct pci_device_iterator * iter; - + if ( pci_sys == NULL ) { return NULL; } @@ -105,7 +105,7 @@ struct pci_device_iterator * pci_id_match_iterator_create( const struct pci_id_match * match ) { struct pci_device_iterator * iter; - + if ( pci_sys == NULL ) { return NULL; } @@ -130,9 +130,9 @@ pci_id_match_iterator_create( const struct pci_id_match * match ) /** * Destroy an iterator previously created with \c pci_iterator_create. - * + * * \param iter Iterator to be destroyed. - * + * * \sa pci_device_next, pci_iterator_create */ void @@ -146,9 +146,9 @@ pci_iterator_destroy( struct pci_device_iterator * iter ) /** * Iterate to the next PCI device. - * + * * \param iter Device iterator returned by \c pci_device_iterate. - * + * * \return * A pointer to a \c pci_device, or \c NULL when all devices have been * iterated. @@ -172,7 +172,7 @@ pci_device_next( struct pci_device_iterator * iter ) case match_slot: { while ( iter->next_index < pci_sys->num_devices ) { - struct pci_device_private * const temp = + struct pci_device_private * const temp = & pci_sys->devices[ iter->next_index ]; iter->next_index++; @@ -184,13 +184,13 @@ pci_device_next( struct pci_device_iterator * iter ) break; } } - + break; } case match_id: { while ( iter->next_index < pci_sys->num_devices ) { - struct pci_device_private * const temp = + struct pci_device_private * const temp = & pci_sys->devices[ iter->next_index ]; iter->next_index++; @@ -198,13 +198,13 @@ pci_device_next( struct pci_device_iterator * iter ) && PCI_ID_COMPARE( iter->match.id.device_id, temp->base.device_id ) && PCI_ID_COMPARE( iter->match.id.subvendor_id, temp->base.subvendor_id ) && PCI_ID_COMPARE( iter->match.id.subdevice_id, temp->base.subdevice_id ) - && ((temp->base.device_class & iter->match.id.device_class_mask) + && ((temp->base.device_class & iter->match.id.device_class_mask) == iter->match.id.device_class) ) { d = temp; break; } } - + break; } } @@ -218,8 +218,8 @@ pci_device_find_by_slot( uint32_t domain, uint32_t bus, uint32_t dev, uint32_t func ) { struct pci_device_iterator iter; - - + + iter.next_index = 0; iter.mode = match_slot; iter.match.slot.domain = domain; diff --git a/src/freebsd_pci.c b/src/freebsd_pci.c index 4a2dcf1..d11535d 100644 --- a/src/freebsd_pci.c +++ b/src/freebsd_pci.c @@ -90,10 +90,10 @@ struct freebsd_pci_system { /** * Map a memory region for a device using /dev/mem. - * + * * \param dev Device whose memory region is to be mapped. * \param map Parameters of the mapping that is to be created. - * + * * \return * Zero on success or an \c errno value on failure. */ @@ -101,7 +101,7 @@ static int pci_device_freebsd_map_range(struct pci_device *dev, struct pci_device_mapping *map) { - const int prot = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) + const int prot = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) ? (PROT_READ | PROT_WRITE) : PROT_READ; struct mem_range_desc mrd; struct mem_range_op mro; @@ -200,7 +200,7 @@ pci_device_freebsd_read( struct pci_device * dev, void * data, io.pi_reg = offset; io.pi_width = toread; - if ( ioctl( freebsd_pci_sys->pcidev, PCIOCREAD, &io ) < 0 ) + if ( ioctl( freebsd_pci_sys->pcidev, PCIOCREAD, &io ) < 0 ) return errno; memcpy(data, &io.pi_data, toread ); @@ -241,7 +241,7 @@ pci_device_freebsd_write( struct pci_device * dev, const void * data, io.pi_width = towrite; memcpy( &io.pi_data, data, towrite ); - if ( ioctl( freebsd_pci_sys->pcidev, PCIOCWRITE, &io ) < 0 ) + if ( ioctl( freebsd_pci_sys->pcidev, PCIOCWRITE, &io ) < 0 ) return errno; offset += towrite; @@ -365,7 +365,7 @@ pci_device_freebsd_probe( struct pci_device * dev ) for (i = 0; i < pci_device_freebsd_get_num_regions( dev ); i++) { bar.pbi_reg = PCIR_BAR(i); - if ( ioctl( freebsd_pci_sys->pcidev, PCIOCGETBAR, &bar ) < 0 ) + if ( ioctl( freebsd_pci_sys->pcidev, PCIOCGETBAR, &bar ) < 0 ) continue; if (PCI_BAR_IO(bar.pbi_base)) @@ -440,7 +440,7 @@ pci_device_freebsd_get_region_info( struct pci_device * dev, int region, /* * We are going to be doing evil things to the registers here - * so disable them via the command register first. + * so disable them via the command register first. */ err = pci_device_cfg_read_u16( dev, &cmd, PCIR_COMMAND ); if (err != 0) diff --git a/src/linux_devmem.c b/src/linux_devmem.c index 271e53f..10e3bde 100644 --- a/src/linux_devmem.c +++ b/src/linux_devmem.c @@ -25,7 +25,7 @@ /** * \file linux_devmem.c * Access PCI subsystem using Linux's the old /dev/mem interface. - * + * * \note * This is currently just a skeleton. It only includes the /dev/mem based * function for reading the device ROM. @@ -52,11 +52,11 @@ /** * Read a device's expansion ROM using /dev/mem. - * + * * \note * This function could probably be used, as-is, on other platforms that have * a /dev/mem interface. - * + * * \bugs * Before using the VGA special case code, this function should check that * VGA access are routed to the device. Right? @@ -94,7 +94,7 @@ pci_device_linux_devmem_read_rom(struct pci_device *dev, void *buffer) rom_size = priv->base.rom_size; PCI_ROM = 1; } - + /* Enable the device's ROM. @@ -106,15 +106,15 @@ pci_device_linux_devmem_read_rom(struct pci_device *dev, void *buffer) } if ((rom_base_tmp & 0x000000001) == 0) { - err = pci_device_cfg_write_u32(& priv->base, + err = pci_device_cfg_write_u32(& priv->base, rom_base_tmp | 1, 48); if (err) { return err; } } } - - + + /* Read the portion of /dev/mem that corresponds to the device's ROM. */ fd = open("/dev/mem", O_RDONLY, 0); @@ -125,7 +125,7 @@ pci_device_linux_devmem_read_rom(struct pci_device *dev, void *buffer) size_t bytes; for (bytes = 0; bytes < rom_size; /* empty */) { - const ssize_t got = pread(fd, buffer, rom_size - bytes, + const ssize_t got = pread(fd, buffer, rom_size - bytes, rom_base + bytes); if (got == -1) { err = errno; @@ -138,7 +138,7 @@ pci_device_linux_devmem_read_rom(struct pci_device *dev, void *buffer) close(fd); } - + /* Disable the device's ROM. */ if (PCI_ROM && ((rom_base_tmp & 0x000000001) == 0)) { diff --git a/src/linux_devmem.h b/src/linux_devmem.h index 2337f30..e69557f 100644 --- a/src/linux_devmem.h +++ b/src/linux_devmem.h @@ -26,7 +26,7 @@ * \file linux_devmem.h * Functions and datastructures that are private to the /dev/mem based * back-end for pciaccess. - * + * * \author Ian Romanick */ diff --git a/src/linux_sysfs.c b/src/linux_sysfs.c index 2085ffb..0ed6862 100644 --- a/src/linux_sysfs.c +++ b/src/linux_sysfs.c @@ -79,7 +79,7 @@ pci_system_linux_sysfs_create( void ) /* If the directory "/sys/bus/pci/devices" exists, then the PCI subsystem * can be accessed using this interface. */ - + if ( stat( SYS_BUS_PCI, & st ) == 0 ) { pci_sys = calloc( 1, sizeof( struct pci_system ) ); if ( pci_sys != NULL ) { @@ -114,7 +114,7 @@ pci_system_linux_sysfs_create( void ) static int scan_sys_pci_filter( const struct dirent * d ) { - return !((strcmp( d->d_name, "." ) == 0) + return !((strcmp( d->d_name, "." ) == 0) || (strcmp( d->d_name, ".." ) == 0)); } @@ -219,7 +219,7 @@ pci_device_linux_sysfs_probe( struct pci_device * dev ) * parsing issues and non-root users can write to PCI config * registers, we use a different file in the device's sysfs * directory called "resource". - * + * * The resource file contains all of the needed information in * a format that is consistent across all platforms. Each BAR * and the expansion ROM have a single line of data containing @@ -251,9 +251,9 @@ pci_device_linux_sysfs_probe( struct pci_device * dev ) dev->regions[i].base_addr = strtoull( next, & next, 16 ); high_addr = strtoull( next, & next, 16 ); flags = strtoull( next, & next, 16 ); - + if ( dev->regions[i].base_addr != 0 ) { - dev->regions[i].size = (high_addr + dev->regions[i].size = (high_addr - dev->regions[i].base_addr) + 1; dev->regions[i].is_IO = (flags & 0x01); @@ -293,7 +293,7 @@ pci_device_linux_sysfs_read_rom( struct pci_device * dev, void * buffer ) dev->bus, dev->dev, dev->func ); - + fd = open( name, O_RDWR ); if ( fd == -1 ) { #ifdef LINUX_ROM @@ -338,7 +338,7 @@ pci_device_linux_sysfs_read_rom( struct pci_device * dev, void * buffer ) total_bytes += bytes; } - + lseek( fd, 0, SEEK_SET ); write( fd, "0", 1 ); @@ -398,7 +398,7 @@ pci_device_linux_sysfs_read( struct pci_device * dev, void * data, offset += bytes; data_bytes += bytes; } - + if ( bytes_read != NULL ) { *bytes_read = size - temp_size; } @@ -458,7 +458,7 @@ pci_device_linux_sysfs_write( struct pci_device * dev, const void * data, offset += bytes; data_bytes += bytes; } - + if ( bytes_written != NULL ) { *bytes_written = size - temp_size; } @@ -473,9 +473,9 @@ pci_device_linux_sysfs_map_range_wc(struct pci_device *dev, { char name[256]; int fd; - const int prot = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) + const int prot = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) ? (PROT_READ | PROT_WRITE) : PROT_READ; - const int open_flags = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) + const int open_flags = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) ? O_RDWR : O_RDONLY; const off_t offset = map->base - dev->regions[map->region].base_addr; @@ -504,10 +504,10 @@ pci_device_linux_sysfs_map_range_wc(struct pci_device *dev, /** * Map a memory region for a device using the Linux sysfs interface. - * + * * \param dev Device whose memory region is to be mapped. * \param map Parameters of the mapping that is to be created. - * + * * \return * Zero on success or an \c errno value on failure. * @@ -525,9 +525,9 @@ pci_device_linux_sysfs_map_range(struct pci_device *dev, char name[256]; int fd; int err = 0; - const int prot = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) + const int prot = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) ? (PROT_READ | PROT_WRITE) : PROT_READ; - const int open_flags = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) + const int open_flags = ((map->flags & PCI_DEV_MAP_FLAG_WRITABLE) != 0) ? O_RDWR : O_RDONLY; const off_t offset = map->base - dev->regions[map->region].base_addr; #ifdef HAVE_MTRR @@ -608,10 +608,10 @@ pci_device_linux_sysfs_map_range(struct pci_device *dev, /** * Unmap a memory region for a device using the Linux sysfs interface. - * + * * \param dev Device whose memory region is to be unmapped. * \param map Parameters of the mapping that is to be destroyed. - * + * * \return * Zero on success or an \c errno value on failure. * @@ -638,7 +638,7 @@ pci_device_linux_sysfs_unmap_range(struct pci_device *dev, err = pci_device_generic_unmap_range (dev, map); if (err) return err; - + #ifdef HAVE_MTRR if ((map->flags & PCI_DEV_MAP_FLAG_CACHABLE) != 0) { sentry.type = MTRR_TYPE_WRBACK; @@ -673,7 +673,7 @@ static void pci_device_linux_sysfs_enable(struct pci_device *dev) dev->bus, dev->dev, dev->func ); - + fd = open( name, O_RDWR ); if (fd == -1) return; @@ -695,7 +695,7 @@ static int pci_device_linux_sysfs_boot_vga(struct pci_device *dev) dev->bus, dev->dev, dev->func ); - + fd = open( name, O_RDONLY ); if (fd == -1) return 0; @@ -722,7 +722,7 @@ static int pci_device_linux_sysfs_has_kernel_driver(struct pci_device *dev) dev->bus, dev->dev, dev->func ); - + ret = stat(name, &dummy); if (ret < 0) return 0; diff --git a/src/netbsd_pci.c b/src/netbsd_pci.c index f33b3eb..d351e8f 100644 --- a/src/netbsd_pci.c +++ b/src/netbsd_pci.c @@ -210,7 +210,7 @@ pci_device_netbsd_write(struct pci_device *dev, const void *data, io.cfgreg.reg = offset; memcpy(&io.cfgreg.val, data, 4); - if (ioctl(pcifd, PCI_IOC_BDF_CFGWRITE, &io) == -1) + if (ioctl(pcifd, PCI_IOC_BDF_CFGWRITE, &io) == -1) return errno; offset += 4; diff --git a/src/pciaccess_private.h b/src/pciaccess_private.h index 1111ef0..beaeaa7 100644 --- a/src/pciaccess_private.h +++ b/src/pciaccess_private.h @@ -25,7 +25,7 @@ /** * \file pciaccess_private.h * Functions and datastructures that are private to the pciaccess library. - * + * * \author Ian Romanick */ @@ -46,12 +46,12 @@ int pci_device_generic_unmap_range(struct pci_device *dev, struct pci_system_methods { void (*destroy)( void ); void (*destroy_device)( struct pci_device * dev ); - int (*read_rom)( struct pci_device * dev, void * buffer ); + int (*read_rom)( struct pci_device * dev, void * buffer ); int (*probe)( struct pci_device * dev ); int (*map_range)(struct pci_device *dev, struct pci_device_mapping *map); int (*unmap_range)(struct pci_device * dev, struct pci_device_mapping *map); - + int (*read)(struct pci_device * dev, void * data, pciaddr_t offset, pciaddr_t size, pciaddr_t * bytes_read ); @@ -96,7 +96,7 @@ struct pci_io_handle { struct pci_device_private { struct pci_device base; const char * device_string; - + uint8_t header_type; /** @@ -105,7 +105,7 @@ struct pci_device_private { /*@{*/ const struct pci_agp_info * agp; /**< AGP capability information. */ /*@}*/ - + /** * Base address of the device's expansion ROM. */ -- 2.7.4