From e165b1d34cd91cb42b0614792aa88e0677944ee7 Mon Sep 17 00:00:00 2001 From: "Khoronzhuk, Ivan" Date: Wed, 22 Oct 2014 17:47:56 +0300 Subject: [PATCH] dma: ti-edma3: introduce edma3 driver MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The EDMA3 controller’s primary purpose is to service data transfers that you program between two memory-mapped slave endpoints on the device. Typical usage includes, but is not limited to the following: - Servicing software-driven paging transfers (e.g., transfers from external memory, such as SDRAM to internal device memory, such as DSP L2 SRAM) - Servicing event-driven peripherals, such as a serial port - Performing sorting or sub-frame extraction of various data structures - Offloading data transfers from the main device DSP(s) - See the device-specific data manual for specific peripherals that are accessible via the EDMA3 controller Signed-off-by: Ivan Khoronzhuk --- arch/arm/include/asm/ti-common/ti-edma3.h | 121 +++++++ drivers/dma/Makefile | 1 + drivers/dma/ti-edma3.c | 384 ++++++++++++++++++++++ 3 files changed, 506 insertions(+) create mode 100644 arch/arm/include/asm/ti-common/ti-edma3.h create mode 100644 drivers/dma/ti-edma3.c diff --git a/arch/arm/include/asm/ti-common/ti-edma3.h b/arch/arm/include/asm/ti-common/ti-edma3.h new file mode 100644 index 0000000000..5adc1dac0e --- /dev/null +++ b/arch/arm/include/asm/ti-common/ti-edma3.h @@ -0,0 +1,121 @@ +/* + * Enhanced Direct Memory Access (EDMA3) Controller + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _EDMA3_H_ +#define _EDMA3_H_ + +#include + +#define EDMA3_PARSET_NULL_LINK 0xffff + +/* + * All parameter RAM set options + * opt field in edma3_param_set_config structure + */ +#define EDMA3_SLOPT_PRIV_LEVEL BIT(31) +#define EDMA3_SLOPT_PRIV_ID(id) ((0xf & (id)) << 24) +#define EDMA3_SLOPT_INTERM_COMP_CHAIN_ENB BIT(23) +#define EDMA3_SLOPT_TRANS_COMP_CHAIN_ENB BIT(22) +#define EDMA3_SLOPT_INTERM_COMP_INT_ENB BIT(21) +#define EDMA3_SLOPT_TRANS_COMP_INT_ENB BIT(20) +#define EDMA3_SLOPT_COMP_CODE(code) ((0x3f & (code)) << 12) +#define EDMA3_SLOPT_FIFO_WIDTH_8 0 +#define EDMA3_SLOPT_FIFO_WIDTH_16 (1 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_32 (2 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_64 (3 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_128 (4 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_256 (5 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_SET(w) ((w & 0x7) << 8) +#define EDMA3_SLOPT_STATIC BIT(3) +#define EDMA3_SLOPT_AB_SYNC BIT(2) +#define EDMA3_SLOPT_DST_ADDR_CONST_MODE BIT(1) +#define EDMA3_SLOPT_SRC_ADDR_CONST_MODE BIT(0) + +enum edma3_address_mode { + INCR = 0, + FIFO = 1 +}; + +enum edma3_fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum edma3_sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +/* PaRAM slots are laid out like this */ +struct edma3_slot_layout { + u32 opt; + u32 src; + u32 a_b_cnt; + u32 dst; + u32 src_dst_bidx; + u32 link_bcntrld; + u32 src_dst_cidx; + u32 ccnt; +} __packed; + +/* + * Use this to assign trigger word number of edma3_slot_layout struct. + * trigger_word_name - is the exact name from edma3_slot_layout. + */ +#define EDMA3_TWORD(trigger_word_name)\ + (offsetof(struct edma3_slot_layout, trigger_word_name) / 4) + +struct edma3_slot_config { + u32 opt; + u32 src; + u32 dst; + int bcnt; + int acnt; + int ccnt; + int src_bidx; + int dst_bidx; + int src_cidx; + int dst_cidx; + int bcntrld; + int link; +}; + +struct edma3_channel_config { + int slot; + int chnum; + int complete_code; /* indicate pending complete interrupt */ + int trigger_slot_word; /* only used for qedma */ +}; + +void qedma3_start(u32 base, struct edma3_channel_config *cfg); +void qedma3_stop(u32 base, struct edma3_channel_config *cfg); +void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg); +int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg); +void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param); +void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param); + +void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode, + enum edma3_fifo_width width); +void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx); +void edma3_set_dest_addr(u32 base, int slot, u32 dst); + +void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode, + enum edma3_fifo_width width); +void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx); +void edma3_set_src_addr(u32 base, int slot, u32 src); + +void edma3_set_transfer_params(u32 base, int slot, int acnt, + int bcnt, int ccnt, u16 bcnt_rld, + enum edma3_sync_dimension sync_mode); + +#endif diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 15b0780b5d..4c8fcc2575 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o obj-$(CONFIG_APBH_DMA) += apbh_dma.o obj-$(CONFIG_FSL_DMA) += fsl_dma.o obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o +obj-$(CONFIG_TI_EDMA3) += ti-edma3.o diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c new file mode 100644 index 0000000000..8184ded9fa --- /dev/null +++ b/drivers/dma/ti-edma3.c @@ -0,0 +1,384 @@ +/* + * Enhanced Direct Memory Access (EDMA3) Controller + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, + * + * Author: Ivan Khoronzhuk + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define EDMA3_SL_BASE(slot) (0x4000 + ((slot) << 5)) +#define EDMA3_SL_MAX_NUM 512 +#define EDMA3_SLOPT_FIFO_WIDTH_MASK (0x7 << 8) + +#define EDMA3_QCHMAP(ch) 0x0200 + ((ch) << 2) +#define EDMA3_CHMAP_PARSET_MASK 0x1ff +#define EDMA3_CHMAP_PARSET_SHIFT 0x5 +#define EDMA3_CHMAP_TRIGWORD_SHIFT 0x2 + +#define EDMA3_QEMCR 0x314 +#define EDMA3_IPR 0x1068 +#define EDMA3_IPRH 0x106c +#define EDMA3_ICR 0x1070 +#define EDMA3_ICRH 0x1074 +#define EDMA3_QEECR 0x1088 +#define EDMA3_QEESR 0x108c +#define EDMA3_QSECR 0x1094 + +/** + * qedma3_start - start qdma on a channel + * @base: base address of edma + * @cfg: pinter to struct edma3_channel_config where you can set + * the slot number to associate with, the chnum, which corresponds + * your quick channel number 0-7, complete code - transfer complete code + * and trigger slot word - which has to correspond to the word number in + * edma3_slot_layout struct for generating event. + * + */ +void qedma3_start(u32 base, struct edma3_channel_config *cfg) +{ + u32 qchmap; + + /* Clear the pending int bit */ + if (cfg->complete_code < 32) + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR); + else + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH); + + /* Map parameter set and trigger word 7 to quick channel */ + qchmap = ((EDMA3_CHMAP_PARSET_MASK & cfg->slot) + << EDMA3_CHMAP_PARSET_SHIFT) | + (cfg->trigger_slot_word << EDMA3_CHMAP_TRIGWORD_SHIFT); + + __raw_writel(qchmap, base + EDMA3_QCHMAP(cfg->chnum)); + + /* Clear missed event if set*/ + __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR); + __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR); + + /* Enable qdma channel event */ + __raw_writel(1 << cfg->chnum, base + EDMA3_QEESR); +} + +/** + * edma3_set_dest - set initial DMA destination address in parameter RAM slot + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @dst: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @width: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma3_set_dest_index(). + */ +void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode, + enum edma3_fifo_width width) +{ + u32 opt; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + opt = __raw_readl(&rg->opt); + if (mode == FIFO) + opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) | + (EDMA3_SLOPT_DST_ADDR_CONST_MODE | + EDMA3_SLOPT_FIFO_WIDTH_SET(width)); + else + opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE; + + __raw_writel(opt, &rg->opt); + __raw_writel(dst, &rg->dst); +} + +/** + * edma3_set_dest_index - configure DMA destination address indexing + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @bidx: byte offset between destination arrays in a frame + * @cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx) +{ + u32 src_dst_bidx; + u32 src_dst_cidx; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + src_dst_bidx = __raw_readl(&rg->src_dst_bidx); + src_dst_cidx = __raw_readl(&rg->src_dst_cidx); + + __raw_writel((src_dst_bidx & 0x0000ffff) | (bidx << 16), + &rg->src_dst_bidx); + __raw_writel((src_dst_cidx & 0x0000ffff) | (cidx << 16), + &rg->src_dst_cidx); +} + +/** + * edma3_set_dest_addr - set destination address for slot only + */ +void edma3_set_dest_addr(u32 base, int slot, u32 dst) +{ + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + __raw_writel(dst, &rg->dst); +} + +/** + * edma3_set_src - set initial DMA source address in parameter RAM slot + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @mode: INCR, except in very rare cases + * @width: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma3_set_src_index(). + */ +void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode, + enum edma3_fifo_width width) +{ + u32 opt; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + opt = __raw_readl(&rg->opt); + if (mode == FIFO) + opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) | + (EDMA3_SLOPT_DST_ADDR_CONST_MODE | + EDMA3_SLOPT_FIFO_WIDTH_SET(width)); + else + opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE; + + __raw_writel(opt, &rg->opt); + __raw_writel(src, &rg->src); +} + +/** + * edma3_set_src_index - configure DMA source address indexing + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @bidx: byte offset between source arrays in a frame + * @cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx) +{ + u32 src_dst_bidx; + u32 src_dst_cidx; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + src_dst_bidx = __raw_readl(&rg->src_dst_bidx); + src_dst_cidx = __raw_readl(&rg->src_dst_cidx); + + __raw_writel((src_dst_bidx & 0xffff0000) | bidx, + &rg->src_dst_bidx); + __raw_writel((src_dst_cidx & 0xffff0000) | cidx, + &rg->src_dst_cidx); +} + +/** + * edma3_set_src_addr - set source address for slot only + */ +void edma3_set_src_addr(u32 base, int slot, u32 src) +{ + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + __raw_writel(src, &rg->src); +} + +/** + * edma3_set_transfer_params - configure DMA transfer parameters + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma3_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma3_set_transfer_params(u32 base, int slot, int acnt, + int bcnt, int ccnt, u16 bcnt_rld, + enum edma3_sync_dimension sync_mode) +{ + u32 opt; + u32 link_bcntrld; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + link_bcntrld = __raw_readl(&rg->link_bcntrld); + + __raw_writel((bcnt_rld << 16) | (0x0000ffff & link_bcntrld), + &rg->link_bcntrld); + + opt = __raw_readl(&rg->opt); + if (sync_mode == ASYNC) + __raw_writel(opt & ~EDMA3_SLOPT_AB_SYNC, &rg->opt); + else + __raw_writel(opt | EDMA3_SLOPT_AB_SYNC, &rg->opt); + + /* Set the acount, bcount, ccount registers */ + __raw_writel((bcnt << 16) | (acnt & 0xffff), &rg->a_b_cnt); + __raw_writel(0xffff & ccnt, &rg->ccnt); +} + +/** + * edma3_write_slot - write parameter RAM data for slot + * @base: base address of edma + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param) +{ + int i; + u32 *p = (u32 *)param; + u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot)); + + for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4) + __raw_writel(*p++, addr++); +} + +/** + * edma3_read_slot - read parameter RAM data from slot + * @base: base address of edma + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param) +{ + int i; + u32 *p = (u32 *)param; + u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot)); + + for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4) + *p++ = __raw_readl(addr++); +} + +void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg) +{ + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + __raw_writel(cfg->opt, &rg->opt); + __raw_writel(cfg->src, &rg->src); + __raw_writel((cfg->bcnt << 16) | (cfg->acnt & 0xffff), &rg->a_b_cnt); + __raw_writel(cfg->dst, &rg->dst); + __raw_writel((cfg->dst_bidx << 16) | + (cfg->src_bidx & 0xffff), &rg->src_dst_bidx); + __raw_writel((cfg->bcntrld << 16) | + (cfg->link & 0xffff), &rg->link_bcntrld); + __raw_writel((cfg->dst_cidx << 16) | + (cfg->src_cidx & 0xffff), &rg->src_dst_cidx); + __raw_writel(0xffff & cfg->ccnt, &rg->ccnt); +} + +/** + * edma3_check_for_transfer - check if transfer coplete by checking + * interrupt pending bit. Clear interrupt pending bit if complete. + * @base: base address of edma + * @cfg: pinter to struct edma3_channel_config which was passed + * to qedma3_start when you started qdma channel + * + * Return 0 if complete, 1 if not. + */ +int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg) +{ + u32 inum; + u32 ipr_base; + u32 icr_base; + + if (cfg->complete_code < 32) { + ipr_base = base + EDMA3_IPR; + icr_base = base + EDMA3_ICR; + inum = 1 << cfg->complete_code; + } else { + ipr_base = base + EDMA3_IPRH; + icr_base = base + EDMA3_ICRH; + inum = 1 << (cfg->complete_code - 32); + } + + /* check complete interrupt */ + if (!(__raw_readl(ipr_base) & inum)) + return 1; + + /* clean up the pending int bit */ + __raw_writel(inum, icr_base); + + return 0; +} + +/** + * qedma3_stop - stops dma on the channel passed + * @base: base address of edma + * @cfg: pinter to struct edma3_channel_config which was passed + * to qedma3_start when you started qdma channel + */ +void qedma3_stop(u32 base, struct edma3_channel_config *cfg) +{ + /* Disable qdma channel event */ + __raw_writel(1 << cfg->chnum, base + EDMA3_QEECR); + + /* clean up the interrupt indication */ + if (cfg->complete_code < 32) + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR); + else + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH); + + /* Clear missed event if set*/ + __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR); + __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR); + + /* Clear the channel map */ + __raw_writel(0, base + EDMA3_QCHMAP(cfg->chnum)); +} -- 2.34.1