From e0677760945585ee475c2d6a7fa4d5b0dd573cb4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 16 Aug 2008 07:50:23 -0300 Subject: [PATCH] V4L/DVB (8689): dpc7146: remove dpc7146 demonstration board driver Old driver for the dpc7146 demonstration board that is no longer relevant. The last time this was tested on actual hardware was probably around 2002. Since this is a driver for a demonstration board the decision was made (after discussing this with the original author, Michael Hunold) to remove it rather than spending a lot of effort continually updating this driver to stay in sync with the latest internal V4L2 or I2C API. Signed-off-by: Hans Verkuil Signed-off-by: Michael Hunold Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 15 -- drivers/media/video/Makefile | 1 - drivers/media/video/dpc7146.c | 408 ------------------------------------------ 3 files changed, 424 deletions(-) delete mode 100644 drivers/media/video/dpc7146.c diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 37123ff..2fa7418 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -709,21 +709,6 @@ config VIDEO_MXB To compile this driver as a module, choose M here: the module will be called mxb. -config VIDEO_DPC - tristate "Philips-Semiconductors 'dpc7146 demonstration board'" - depends on PCI && VIDEO_V4L1 && I2C - select VIDEO_SAA7146_VV - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO - ---help--- - This is a video4linux driver for the 'dpc7146 demonstration - board' by Philips-Semiconductors. It's the reference design - for SAA7146 bases boards, so if you have some unsupported - saa7146 based, analog video card, chances are good that it - will work with this skeleton driver. - - To compile this driver as a module, choose M here: the - module will be called dpc7146. - config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" depends on PCI && VIDEO_V4L2 && I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index d234db7..012bc11 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -84,7 +84,6 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o -obj-$(CONFIG_VIDEO_DPC) += dpc7146.o obj-$(CONFIG_TUNER_3036) += tuner-3036.o obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c deleted file mode 100644 index 88d6df7..0000000 --- a/drivers/media/video/dpc7146.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - dpc7146.c - v4l2 driver for the dpc7146 demonstration board - - Copyright (C) 2000-2003 Michael Hunold - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#define DEBUG_VARIABLE debug - -#include -#include /* for saa7111a */ - -#define I2C_SAA7111A 0x24 - -/* All unused bytes are reserverd. */ -#define SAA711X_CHIP_VERSION 0x00 -#define SAA711X_ANALOG_INPUT_CONTROL_1 0x02 -#define SAA711X_ANALOG_INPUT_CONTROL_2 0x03 -#define SAA711X_ANALOG_INPUT_CONTROL_3 0x04 -#define SAA711X_ANALOG_INPUT_CONTROL_4 0x05 -#define SAA711X_HORIZONTAL_SYNC_START 0x06 -#define SAA711X_HORIZONTAL_SYNC_STOP 0x07 -#define SAA711X_SYNC_CONTROL 0x08 -#define SAA711X_LUMINANCE_CONTROL 0x09 -#define SAA711X_LUMINANCE_BRIGHTNESS 0x0A -#define SAA711X_LUMINANCE_CONTRAST 0x0B -#define SAA711X_CHROMA_SATURATION 0x0C -#define SAA711X_CHROMA_HUE_CONTROL 0x0D -#define SAA711X_CHROMA_CONTROL 0x0E -#define SAA711X_FORMAT_DELAY_CONTROL 0x10 -#define SAA711X_OUTPUT_CONTROL_1 0x11 -#define SAA711X_OUTPUT_CONTROL_2 0x12 -#define SAA711X_OUTPUT_CONTROL_3 0x13 -#define SAA711X_V_GATE_1_START 0x15 -#define SAA711X_V_GATE_1_STOP 0x16 -#define SAA711X_V_GATE_1_MSB 0x17 -#define SAA711X_TEXT_SLICER_STATUS 0x1A -#define SAA711X_DECODED_BYTES_OF_TS_1 0x1B -#define SAA711X_DECODED_BYTES_OF_TS_2 0x1C -#define SAA711X_STATUS_BYTE 0x1F - -#define DPC_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) - -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "debug verbosity"); - -static int dpc_num; - -#define DPC_INPUTS 2 -static struct v4l2_input dpc_inputs[DPC_INPUTS] = { - { 0, "Port A", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, - { 1, "Port B", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, -}; - -#define DPC_AUDIOS 0 - -static struct saa7146_extension_ioctls ioctls[] = { - { VIDIOC_G_INPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_S_INPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE }, - { VIDIOC_S_STD, SAA7146_AFTER }, - { 0, 0 } -}; - -struct dpc -{ - struct video_device *video_dev; - struct video_device *vbi_dev; - - struct i2c_adapter i2c_adapter; - struct i2c_client *saa7111a; - - int cur_input; /* current input */ -}; - -static int dpc_check_clients(struct device *dev, void *data) -{ - struct dpc* dpc = data; - struct i2c_client *client = i2c_verify_client(dev); - - if( !client ) - return 0; - - if( I2C_SAA7111A == client->addr ) - dpc->saa7111a = client; - - return 0; -} - -/* fixme: add vbi stuff here */ -static int dpc_probe(struct saa7146_dev* dev) -{ - struct dpc* dpc = NULL; - - dpc = kzalloc(sizeof(struct dpc), GFP_KERNEL); - if( NULL == dpc ) { - printk("dpc_v4l2.o: dpc_probe: not enough kernel memory.\n"); - return -ENOMEM; - } - - /* FIXME: enable i2c-port pins, video-port-pins - video port pins should be enabled here ?! */ - saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26)); - - dpc->i2c_adapter = (struct i2c_adapter) { - .class = I2C_CLASS_TV_ANALOG, - .name = "dpc7146", - }; - saa7146_i2c_adapter_prepare(dev, &dpc->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); - if(i2c_add_adapter(&dpc->i2c_adapter) < 0) { - DEB_S(("cannot register i2c-device. skipping.\n")); - kfree(dpc); - return -EFAULT; - } - - /* loop through all i2c-devices on the bus and look who is there */ - device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients); - - /* check if all devices are present */ - if (!dpc->saa7111a) { - DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n")); - i2c_del_adapter(&dpc->i2c_adapter); - kfree(dpc); - return -ENODEV; - } - - /* all devices are present, probe was successful */ - DEB_D(("dpc_v4l2.o: dpc_probe succeeded for this device.\n")); - - /* we store the pointer in our private data field */ - dev->ext_priv = dpc; - - return 0; -} - -/* bring hardware to a sane state. this has to be done, just in case someone - wants to capture from this device before it has been properly initialized. - the capture engine would badly fail, because no valid signal arrives on the - saa7146, thus leading to timeouts and stuff. */ -static int dpc_init_done(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_D(("dpc_v4l2.o: dpc_init_done called.\n")); - - /* initialize the helper ics to useful values */ - i2c_smbus_write_byte_data(dpc->saa7111a, 0x00, 0x11); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x02, 0xc0); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x03, 0x30); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x04, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x05, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x06, 0xde); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x07, 0xad); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x08, 0xa8); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x09, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0a, 0x80); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0b, 0x47); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0c, 0x40); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0d, 0x00); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x0e, 0x03); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x10, 0xd0); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x11, 0x1c); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x12, 0xc1); - i2c_smbus_write_byte_data(dpc->saa7111a, 0x13, 0x30); - - i2c_smbus_write_byte_data(dpc->saa7111a, 0x1f, 0x81); - - return 0; -} - -static struct saa7146_ext_vv vv_data; - -/* this function only gets called when the probing was successful */ -static int dpc_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_D(("dpc_v4l2.o: dpc_attach called.\n")); - - /* checking for i2c-devices can be omitted here, because we - already did this in "dpc_vl42_probe" */ - - saa7146_vv_init(dev,&vv_data); - if( 0 != saa7146_register_device(&dpc->video_dev, dev, "dpc", VFL_TYPE_GRABBER)) { - ERR(("cannot register capture v4l2 device. skipping.\n")); - return -1; - } - - /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ - if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) { - if( 0 != saa7146_register_device(&dpc->vbi_dev, dev, "dpc", VFL_TYPE_VBI)) { - ERR(("cannot register vbi v4l2 device. skipping.\n")); - } - } - - i2c_use_client(dpc->saa7111a); - - printk("dpc: found 'dpc7146 demonstration board'-%d.\n",dpc_num); - dpc_num++; - - /* the rest */ - dpc->cur_input = 0; - dpc_init_done(dev); - - return 0; -} - -static int dpc_detach(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - DEB_EE(("dev:%p\n",dev)); - - i2c_release_client(dpc->saa7111a); - - saa7146_unregister_device(&dpc->video_dev,dev); - if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) { - saa7146_unregister_device(&dpc->vbi_dev,dev); - } - saa7146_vv_release(dev); - - dpc_num--; - - i2c_del_adapter(&dpc->i2c_adapter); - kfree(dpc); - return 0; -} - -#ifdef axa -int dpc_vbi_bypass(struct saa7146_dev* dev) -{ - struct dpc* dpc = (struct dpc*)dev->ext_priv; - - int i = 1; - - /* switch bypass in saa7111a */ - if ( 0 != dpc->saa7111a->driver->command(dpc->saa7111a,SAA711X_VBI_BYPASS, &i)) { - printk("dpc_v4l2.o: VBI_BYPASS: could not address saa7111a.\n"); - return -1; - } - - return 0; -} -#endif - -static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) -{ - struct saa7146_dev *dev = fh->dev; - struct dpc* dpc = (struct dpc*)dev->ext_priv; -/* - struct saa7146_vv *vv = dev->vv_data; -*/ - switch(cmd) - { - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; - DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); - - if( i->index < 0 || i->index >= DPC_INPUTS) { - return -EINVAL; - } - - memcpy(i, &dpc_inputs[i->index], sizeof(struct v4l2_input)); - - DEB_D(("dpc_v4l2.o: v4l2_ioctl: VIDIOC_ENUMINPUT %d.\n",i->index)); - return 0; - } - case VIDIOC_G_INPUT: - { - int *input = (int *)arg; - *input = dpc->cur_input; - - DEB_D(("dpc_v4l2.o: VIDIOC_G_INPUT: %d\n",*input)); - return 0; - } - case VIDIOC_S_INPUT: - { - int input = *(int *)arg; - - if (input < 0 || input >= DPC_INPUTS) { - return -EINVAL; - } - - dpc->cur_input = input; - - /* fixme: switch input here, switch audio, too! */ -// saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); - printk("dpc_v4l2.o: VIDIOC_S_INPUT: fixme switch input.\n"); - - return 0; - } - default: -/* - DEB_D(("dpc_v4l2.o: v4l2_ioctl does not handle this ioctl.\n")); -*/ - return -ENOIOCTLCMD; - } - return 0; -} - -static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) -{ - return 0; -} - -static struct saa7146_standard standard[] = { - { - .name = "PAL", .id = V4L2_STD_PAL, - .v_offset = 0x17, .v_field = 288, - .h_offset = 0x14, .h_pixels = 680, - .v_max_out = 576, .h_max_out = 768, - }, { - .name = "NTSC", .id = V4L2_STD_NTSC, - .v_offset = 0x16, .v_field = 240, - .h_offset = 0x06, .h_pixels = 708, - .v_max_out = 480, .h_max_out = 640, - }, { - .name = "SECAM", .id = V4L2_STD_SECAM, - .v_offset = 0x14, .v_field = 288, - .h_offset = 0x14, .h_pixels = 720, - .v_max_out = 576, .h_max_out = 768, - } -}; - -static struct saa7146_extension extension; - -static struct saa7146_pci_extension_data dpc = { - .ext_priv = "Multimedia eXtension Board", - .ext = &extension, -}; - -static struct pci_device_id pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7146, - .subvendor = 0x0000, - .subdevice = 0x0000, - .driver_data = (unsigned long)&dpc, - }, { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_ext_vv vv_data = { - .inputs = DPC_INPUTS, - .capabilities = V4L2_CAP_VBI_CAPTURE, - .stds = &standard[0], - .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), - .std_callback = &std_callback, - .ioctls = &ioctls[0], - .ioctl = dpc_ioctl, -}; - -static struct saa7146_extension extension = { - .name = "dpc7146 demonstration board", - .flags = SAA7146_USE_I2C_IRQ, - - .pci_tbl = &pci_tbl[0], - .module = THIS_MODULE, - - .probe = dpc_probe, - .attach = dpc_attach, - .detach = dpc_detach, - - .irq_mask = 0, - .irq_func = NULL, -}; - -static int __init dpc_init_module(void) -{ - if( 0 != saa7146_register_extension(&extension)) { - DEB_S(("failed to register extension.\n")); - return -ENODEV; - } - - return 0; -} - -static void __exit dpc_cleanup_module(void) -{ - saa7146_unregister_extension(&extension); -} - -module_init(dpc_init_module); -module_exit(dpc_cleanup_module); - -MODULE_DESCRIPTION("video4linux-2 driver for the 'dpc7146 demonstration board'"); -MODULE_AUTHOR("Michael Hunold "); -MODULE_LICENSE("GPL"); -- 2.7.4