From e027d6f9d52d9ccabb307d0cb0265de3481b1e9e Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 20 May 2011 00:40:16 -0600 Subject: [PATCH] basic_mmio_gpio: detect output method at probe time Rather than detecting the output method each time in the .set() callback, do it at probe time and set the appropriate callback. Changes since v2: moved the reg_dat initialization into bgpio_setup_io(). Signed-off-by: Jamie Iles Acked-by: Anton Vorontsov Signed-off-by: Grant Likely --- drivers/gpio/basic_mmio_gpio.c | 90 +++++++++++++++++++++++++++--------------- 1 file changed, 59 insertions(+), 31 deletions(-) diff --git a/drivers/gpio/basic_mmio_gpio.c b/drivers/gpio/basic_mmio_gpio.c index 90f7f89..728bc67 100644 --- a/drivers/gpio/basic_mmio_gpio.c +++ b/drivers/gpio/basic_mmio_gpio.c @@ -161,14 +161,6 @@ static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) unsigned long mask = bgc->pin2mask(bgc, gpio); unsigned long flags; - if (bgc->reg_set) { - if (val) - bgc->write_reg(bgc->reg_set, mask); - else - bgc->write_reg(bgc->reg_clr, mask); - return; - } - spin_lock_irqsave(&bgc->lock, flags); if (val) @@ -181,6 +173,18 @@ static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) spin_unlock_irqrestore(&bgc->lock, flags); } +static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio, + int val) +{ + struct bgpio_chip *bgc = to_bgpio_chip(gc); + unsigned long mask = bgc->pin2mask(bgc, gpio); + + if (val) + bgc->write_reg(bgc->reg_set, mask); + else + bgc->write_reg(bgc->reg_clr, mask); +} + static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) { return 0; @@ -188,7 +192,8 @@ static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) { - bgpio_set(gc, gpio, val); + gc->set(gc, gpio, val); + return 0; } @@ -238,18 +243,25 @@ static int bgpio_setup_accessors(struct platform_device *pdev, return 0; } -static int __devinit bgpio_probe(struct platform_device *pdev) +/* + * Create the device and allocate the resources. For setting GPIO's there are + * two supported configurations: + * + * - single output register resource (named "dat"). + * - set/clear pair (named "set" and "clr"). + * + * For the single output register, this drives a 1 by setting a bit and a zero + * by clearing a bit. For the set clr pair, this drives a 1 by setting a bit + * in the set register and clears it by setting a bit in the clear register. + * The configuration is detected by which resources are present. + */ +static int bgpio_setup_io(struct platform_device *pdev, + struct bgpio_chip *bgc) { - struct device *dev = &pdev->dev; - struct bgpio_pdata *pdata = dev_get_platdata(dev); - struct bgpio_chip *bgc; - struct resource *res_dat; struct resource *res_set; struct resource *res_clr; + struct resource *res_dat; resource_size_t dat_sz; - int bits; - int ret; - int ngpio; res_dat = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat"); if (!res_dat) @@ -259,16 +271,11 @@ static int __devinit bgpio_probe(struct platform_device *pdev) if (!is_power_of_2(dat_sz)) return -EINVAL; - bits = dat_sz * 8; - ngpio = bits; - if (bits > BITS_PER_LONG) + bgc->bits = dat_sz * 8; + if (bgc->bits > BITS_PER_LONG) return -EINVAL; - bgc = devm_kzalloc(dev, sizeof(*bgc), GFP_KERNEL); - if (!bgc) - return -ENOMEM; - - bgc->reg_dat = bgpio_request_and_map(dev, res_dat); + bgc->reg_dat = bgpio_request_and_map(&pdev->dev, res_dat); if (!bgc->reg_dat) return -ENOMEM; @@ -276,19 +283,41 @@ static int __devinit bgpio_probe(struct platform_device *pdev) res_clr = platform_get_resource_byname(pdev, IORESOURCE_MEM, "clr"); if (res_set && res_clr) { if (resource_size(res_set) != resource_size(res_clr) || - resource_size(res_set) != dat_sz) + resource_size(res_set) != resource_size(res_dat)) return -EINVAL; - bgc->reg_set = bgpio_request_and_map(dev, res_set); - bgc->reg_clr = bgpio_request_and_map(dev, res_clr); + bgc->reg_set = bgpio_request_and_map(&pdev->dev, res_set); + bgc->reg_clr = bgpio_request_and_map(&pdev->dev, res_clr); if (!bgc->reg_set || !bgc->reg_clr) return -ENOMEM; + + bgc->gc.set = bgpio_set_with_clear; } else if (res_set || res_clr) { return -EINVAL; + } else { + bgc->gc.set = bgpio_set; } - spin_lock_init(&bgc->lock); + return 0; +} + +static int __devinit bgpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bgpio_pdata *pdata = dev_get_platdata(dev); + struct bgpio_chip *bgc; + int ret; + int ngpio; + + bgc = devm_kzalloc(dev, sizeof(*bgc), GFP_KERNEL); + if (!bgc) + return -ENOMEM; + + ret = bgpio_setup_io(pdev, bgc); + if (ret) + return ret; + ngpio = bgc->bits; if (pdata) { bgc->gc.base = pdata->base; if (pdata->ngpio > 0) @@ -297,18 +326,17 @@ static int __devinit bgpio_probe(struct platform_device *pdev) bgc->gc.base = -1; } - bgc->bits = bits; ret = bgpio_setup_accessors(pdev, bgc); if (ret) return ret; + spin_lock_init(&bgc->lock); bgc->data = bgc->read_reg(bgc->reg_dat); bgc->gc.ngpio = ngpio; bgc->gc.direction_input = bgpio_dir_in; bgc->gc.direction_output = bgpio_dir_out; bgc->gc.get = bgpio_get; - bgc->gc.set = bgpio_set; bgc->gc.dev = dev; bgc->gc.label = dev_name(dev); -- 2.7.4