From df369d84ec724cee06c69694a2fd3ab7beb007b8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 30 Jan 2014 21:25:14 -0800 Subject: [PATCH] regulator: gpio: add gpios-status for DT config->gpios[x].flags indicates initial pin status, and it will be used for drvdata->state on gpio_regulator_probe(). But, current of_get_gpio_regulator_config() doesn't care about this flags. This patch adds new gpios-status property in order to care about initial pin status. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown (cherry picked from commit 0094050d783bbadffe83effef11a0bda901153ce) Signed-off-by: Simon Horman --- .../devicetree/bindings/regulator/gpio-regulator.txt | 1 + drivers/regulator/gpio-regulator.c | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index 63c6598..3ecb585 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -8,6 +8,7 @@ Required properties: Optional properties: - enable-gpio : GPIO to use to enable/disable the regulator. - gpios : GPIO group used to control voltage. +- gpios-states : gpios pin's initial states. 1 means HIGH - startup-delay-us : Startup time in microseconds. - enable-active-high : Polarity of GPIO is active high (default is low). diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index bad44f3..ac3a8c7 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -172,11 +172,22 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np) if (!config->gpios) return ERR_PTR(-ENOMEM); + prop = of_find_property(np, "gpios-states", NULL); + if (prop) { + proplen = prop->length / sizeof(int); + if (proplen != config->nr_gpios) { + /* gpios <-> gpios-states mismatch */ + prop = NULL; + } + } + for (i = 0; i < config->nr_gpios; i++) { gpio = of_get_named_gpio(np, "gpios", i); if (gpio < 0) break; config->gpios[i].gpio = gpio; + if (prop && be32_to_cpup((int *)prop->value + i)) + config->gpios[i].flags = GPIOF_OUT_INIT_HIGH; } /* Fetch states. */ -- 2.7.4