From de9c1b6b088ca2795594ff58e1778de668821db3 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Thu, 16 Jun 2016 20:01:46 +0300 Subject: [PATCH] drm/i915: Sanity check PPS HW state MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The wait for panel status helper will only function correctly if the HW panel timings are programmed correctly. Returning prematurely from this helper may lead to obscure bugs later, so sanity check the HW timing registers. v2: - Check the T8, T9 fields too, we do program them (Ville) CC: Ville Syrjälä Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1466096506-11937-1-git-send-email-imre.deak@intel.com --- drivers/gpu/drm/i915/intel_dp.c | 58 +++++++++++++++++++++++++++++++---------- 1 file changed, 44 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 6992915..9a1a347 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1772,6 +1772,9 @@ static void intel_dp_prepare(struct intel_encoder *encoder) #define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) #define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) +static void intel_pps_verify_state(struct drm_i915_private *dev_priv, + struct intel_dp *intel_dp); + static void wait_panel_status(struct intel_dp *intel_dp, u32 mask, u32 value) @@ -1782,6 +1785,8 @@ static void wait_panel_status(struct intel_dp *intel_dp, lockdep_assert_held(&dev_priv->pps_mutex); + intel_pps_verify_state(dev_priv, intel_dp); + pp_stat_reg = _pp_stat_reg(intel_dp); pp_ctrl_reg = _pp_ctrl_reg(intel_dp); @@ -4818,6 +4823,31 @@ intel_pps_readout_hw_state(struct drm_i915_private *dev_priv, } static void +intel_pps_dump_state(const char *state_name, const struct edp_power_seq *seq) +{ + DRM_DEBUG_KMS("%s t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", + state_name, + seq->t1_t3, seq->t8, seq->t9, seq->t10, seq->t11_t12); +} + +static void +intel_pps_verify_state(struct drm_i915_private *dev_priv, + struct intel_dp *intel_dp) +{ + struct edp_power_seq hw; + struct edp_power_seq *sw = &intel_dp->pps_delays; + + intel_pps_readout_hw_state(dev_priv, intel_dp, &hw); + + if (hw.t1_t3 != sw->t1_t3 || hw.t8 != sw->t8 || hw.t9 != sw->t9 || + hw.t10 != sw->t10 || hw.t11_t12 != sw->t11_t12) { + DRM_ERROR("PPS state mismatch\n"); + intel_pps_dump_state("sw", sw); + intel_pps_dump_state("hw", &hw); + } +} + +static void intel_dp_init_panel_power_sequencer(struct drm_device *dev, struct intel_dp *intel_dp) { @@ -4833,8 +4863,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, intel_pps_readout_hw_state(dev_priv, intel_dp, &cur); - DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", - cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); + intel_pps_dump_state("cur", &cur); vbt = dev_priv->vbt.edp.pps; @@ -4850,8 +4879,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, * too. */ spec.t11_t12 = (510 + 100) * 10; - DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", - vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12); + intel_pps_dump_state("vbt", &vbt); /* Use the max of the register settings and vbt. If both are * unset, fall back to the spec limits. */ @@ -4879,6 +4907,16 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + + /* + * We override the HW backlight delays to 1 because we do manual waits + * on them. For T8, even BSpec recommends doing it. For T9, if we + * don't do this, we'll end up waiting for the backlight off delay + * twice: once when we do the manual sleep, and once when we disable + * the panel and wait for the PP_STATUS bit to become zero. + */ + final->t8 = 1; + final->t9 = 1; } static void @@ -4896,17 +4934,9 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, intel_pps_get_registers(dev_priv, intel_dp, ®s); - /* - * And finally store the new values in the power sequencer. The - * backlight delays are set to 1 because we do manual waits on them. For - * T8, even BSpec recommends doing it. For T9, if we don't do this, - * we'll end up waiting for the backlight off delay twice: once when we - * do the manual sleep, and once when we disable the panel and wait for - * the PP_STATUS bit to become zero. - */ pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | - (1 << PANEL_LIGHT_ON_DELAY_SHIFT); - pp_off = (1 << PANEL_LIGHT_OFF_DELAY_SHIFT) | + (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT); + pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) | (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); /* Compute the divisor for the pp clock, simply match the Bspec * formula. */ -- 2.7.4