From ddd5ed3a90e797e2015cd83e9697c6ed867a3891 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 27 Mar 2018 09:06:14 +0200 Subject: [PATCH] mtd: rawnand: sunxi: Remove support for GPIO-based Ready/Busy polling None of the existing platforms connect the R/B pin to a GPIO (they all use one of the dedicated R/B pin). Anyway, if we ever get short of native R/B pins, it's probably better to fallback to STATUS reg polling than trying to poll a GPIO. Signed-off-by: Boris Brezillon Reviewed-by: Rob Herring --- .../devicetree/bindings/mtd/sunxi-nand.txt | 2 - drivers/mtd/nand/raw/sunxi_nand.c | 91 ++++------------------ 2 files changed, 15 insertions(+), 78 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index 0734f03..dcd5a5d 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -22,8 +22,6 @@ Optional properties: - reset : phandle + reset specifier pair - reset-names : must contain "ahb" - allwinner,rb : shall contain the native Ready/Busy ids. - or -- rb-gpios : shall contain the gpios used as R/B pins. - nand-ecc-mode : one of the supported ECC modes ("hw", "soft", "soft_bch" or "none") diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c index aad4281..d831a14 100644 --- a/drivers/mtd/nand/raw/sunxi_nand.c +++ b/drivers/mtd/nand/raw/sunxi_nand.c @@ -166,48 +166,15 @@ #define NFC_MAX_CS 7 /* - * Ready/Busy detection type: describes the Ready/Busy detection modes - * - * @RB_NONE: no external detection available, rely on STATUS command - * and software timeouts - * @RB_NATIVE: use sunxi NAND controller Ready/Busy support. The Ready/Busy - * pin of the NAND flash chip must be connected to one of the - * native NAND R/B pins (those which can be muxed to the NAND - * Controller) - * @RB_GPIO: use a simple GPIO to handle Ready/Busy status. The Ready/Busy - * pin of the NAND flash chip must be connected to a GPIO capable - * pin. - */ -enum sunxi_nand_rb_type { - RB_NONE, - RB_NATIVE, - RB_GPIO, -}; - -/* - * Ready/Busy structure: stores information related to Ready/Busy detection - * - * @type: the Ready/Busy detection mode - * @info: information related to the R/B detection mode. Either a gpio - * id or a native R/B id (those supported by the NAND controller). - */ -struct sunxi_nand_rb { - enum sunxi_nand_rb_type type; - union { - int gpio; - int nativeid; - } info; -}; - -/* * Chip Select structure: stores information related to NAND Chip Select * * @cs: the NAND CS id used to communicate with a NAND Chip - * @rb: the Ready/Busy description + * @rb: the Ready/Busy pin ID. -1 means no R/B pin connected to the + * NFC */ struct sunxi_nand_chip_sel { u8 cs; - struct sunxi_nand_rb rb; + s8 rb; }; /* @@ -440,30 +407,19 @@ static int sunxi_nfc_dev_ready(struct mtd_info *mtd) struct nand_chip *nand = mtd_to_nand(mtd); struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); - struct sunxi_nand_rb *rb; - int ret; + u32 mask; if (sunxi_nand->selected < 0) return 0; - rb = &sunxi_nand->sels[sunxi_nand->selected].rb; - - switch (rb->type) { - case RB_NATIVE: - ret = !!(readl(nfc->regs + NFC_REG_ST) & - NFC_RB_STATE(rb->info.nativeid)); - break; - case RB_GPIO: - ret = gpio_get_value(rb->info.gpio); - break; - case RB_NONE: - default: - ret = 0; + if (sunxi_nand->sels[sunxi_nand->selected].rb < 0) { dev_err(nfc->dev, "cannot check R/B NAND status!\n"); - break; + return 0; } - return ret; + mask = NFC_RB_STATE(sunxi_nand->sels[sunxi_nand->selected].rb); + + return !!(readl(nfc->regs + NFC_REG_ST) & mask); } static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip) @@ -488,12 +444,11 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip) ctl |= NFC_CE_SEL(sel->cs) | NFC_EN | NFC_PAGE_SHIFT(nand->page_shift); - if (sel->rb.type == RB_NONE) { + if (sel->rb < 0) { nand->dev_ready = NULL; } else { nand->dev_ready = sunxi_nfc_dev_ready; - if (sel->rb.type == RB_NATIVE) - ctl |= NFC_RB_SEL(sel->rb.info.nativeid); + ctl |= NFC_RB_SEL(sel->rb); } writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA); @@ -1946,26 +1901,10 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, chip->sels[i].cs = tmp; if (!of_property_read_u32_index(np, "allwinner,rb", i, &tmp) && - tmp < 2) { - chip->sels[i].rb.type = RB_NATIVE; - chip->sels[i].rb.info.nativeid = tmp; - } else { - ret = of_get_named_gpio(np, "rb-gpios", i); - if (ret >= 0) { - tmp = ret; - chip->sels[i].rb.type = RB_GPIO; - chip->sels[i].rb.info.gpio = tmp; - ret = devm_gpio_request(dev, tmp, "nand-rb"); - if (ret) - return ret; - - ret = gpio_direction_input(tmp); - if (ret) - return ret; - } else { - chip->sels[i].rb.type = RB_NONE; - } - } + tmp < 2) + chip->sels[i].rb = tmp; + else + chip->sels[i].rb = -1; } nand = &chip->nand; -- 2.7.4