From dc8797e39fca777217fd4cfc9c74a5337a3daa76 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 24 Jul 2017 21:58:57 +0800 Subject: [PATCH] clk: sunxi-ng: Add MP_MMC clocks that support MMC timing modes switching All of our MMC clocks are of the MP clock type. A few MMC clocks on some SoCs, such as MMC2 on the A83T, support new/old timing mode switching. >From a clock rate point of view, when the new timing mode is active. the output clock rate is halved. This patch adds a special wrapper class of clocks, MP_MMC, around the generic MP type clocks. The rate related callbacks in ccu_mp_mmc_ops for this class look at the timing mode bit and apply the /2 post-divider when needed, before passing it through to the generic class ops, ccu_mp_ops. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Ulf Hansson --- drivers/clk/sunxi-ng/ccu_mp.c | 80 +++++++++++++++++++++++++++++++++++++++++++ drivers/clk/sunxi-ng/ccu_mp.h | 30 ++++++++++++++++ 2 files changed, 110 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c index b917ad7..688855e 100644 --- a/drivers/clk/sunxi-ng/ccu_mp.c +++ b/drivers/clk/sunxi-ng/ccu_mp.c @@ -172,3 +172,83 @@ const struct clk_ops ccu_mp_ops = { .recalc_rate = ccu_mp_recalc_rate, .set_rate = ccu_mp_set_rate, }; + +/* + * Support for MMC timing mode switching + * + * The MMC clocks on some SoCs support switching between old and + * new timing modes. A platform specific API is provided to query + * and set the timing mode on supported SoCs. + * + * In addition, a special class of ccu_mp_ops is provided, which + * takes in to account the timing mode switch. When the new timing + * mode is active, the clock output rate is halved. This new class + * is a wrapper around the generic ccu_mp_ops. When clock rates + * are passed through to ccu_mp_ops callbacks, they are doubled + * if the new timing mode bit is set, to account for the post + * divider. Conversely, when clock rates are passed back, they + * are halved if the mode bit is set. + */ + +static unsigned long ccu_mp_mmc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long rate = ccu_mp_recalc_rate(hw, parent_rate); + struct ccu_common *cm = hw_to_ccu_common(hw); + u32 val = readl(cm->base + cm->reg); + + if (val & CCU_MMC_NEW_TIMING_MODE) + return rate / 2; + return rate; +} + +static int ccu_mp_mmc_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct ccu_common *cm = hw_to_ccu_common(hw); + u32 val = readl(cm->base + cm->reg); + int ret; + + /* adjust the requested clock rate */ + if (val & CCU_MMC_NEW_TIMING_MODE) { + req->rate *= 2; + req->min_rate *= 2; + req->max_rate *= 2; + } + + ret = ccu_mp_determine_rate(hw, req); + + /* re-adjust the requested clock rate back */ + if (val & CCU_MMC_NEW_TIMING_MODE) { + req->rate /= 2; + req->min_rate /= 2; + req->max_rate /= 2; + } + + return ret; +} + +static int ccu_mp_mmc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct ccu_common *cm = hw_to_ccu_common(hw); + u32 val = readl(cm->base + cm->reg); + + if (val & CCU_MMC_NEW_TIMING_MODE) + rate *= 2; + + return ccu_mp_set_rate(hw, rate, parent_rate); +} + +const struct clk_ops ccu_mp_mmc_ops = { + .disable = ccu_mp_disable, + .enable = ccu_mp_enable, + .is_enabled = ccu_mp_is_enabled, + + .get_parent = ccu_mp_get_parent, + .set_parent = ccu_mp_set_parent, + + .determine_rate = ccu_mp_mmc_determine_rate, + .recalc_rate = ccu_mp_mmc_recalc_rate, + .set_rate = ccu_mp_mmc_set_rate, +}; diff --git a/drivers/clk/sunxi-ng/ccu_mp.h b/drivers/clk/sunxi-ng/ccu_mp.h index 915625e..aaef11d 100644 --- a/drivers/clk/sunxi-ng/ccu_mp.h +++ b/drivers/clk/sunxi-ng/ccu_mp.h @@ -14,6 +14,7 @@ #ifndef _CCU_MP_H_ #define _CCU_MP_H_ +#include #include #include "ccu_common.h" @@ -74,4 +75,33 @@ static inline struct ccu_mp *hw_to_ccu_mp(struct clk_hw *hw) extern const struct clk_ops ccu_mp_ops; +/* + * Special class of M-P clock that supports MMC timing modes + * + * Since the MMC clock registers all follow the same layout, we can + * simplify the macro for this particular case. In addition, as + * switching modes also affects the output clock rate, we need to + * have CLK_GET_RATE_NOCACHE for all these types of clocks. + */ + +#define SUNXI_CCU_MP_MMC_WITH_MUX_GATE(_struct, _name, _parents, _reg, \ + _flags) \ + struct ccu_mp _struct = { \ + .enable = BIT(31), \ + .m = _SUNXI_CCU_DIV(0, 4), \ + .p = _SUNXI_CCU_DIV(16, 2), \ + .mux = _SUNXI_CCU_MUX(24, 2), \ + .common = { \ + .reg = _reg, \ + .features = CCU_FEATURE_MMC_TIMING_SWITCH, \ + .hw.init = CLK_HW_INIT_PARENTS(_name, \ + _parents, \ + &ccu_mp_mmc_ops, \ + CLK_GET_RATE_NOCACHE | \ + _flags), \ + } \ + } + +extern const struct clk_ops ccu_mp_mmc_ops; + #endif /* _CCU_MP_H_ */ -- 2.7.4