From dbf6719a4a080669acb5087893704586c791aa41 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 20 Jun 2013 17:34:33 +0200 Subject: [PATCH] ARM: i.MX6: add ethernet phy fixup for KSZ9031 The KSZ9031 is used on the i.MX6 based Data Modul eDM-QMX6 board. It needs the same fixup to the rx/tx delays as other i.MX6 boards. Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 57f350c..db1db78 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -115,6 +115,27 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev) return 0; } +static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val) +{ + phy_write(dev, 0x0d, device); + phy_write(dev, 0x0e, reg); + phy_write(dev, 0x0d, (1 << 14) | device); + phy_write(dev, 0x0e, val); +} + +static int ksz9031rn_phy_fixup(struct phy_device *dev) +{ + /* + * min rx data delay, max rx/tx clock delay, + * min rx/tx control delay + */ + mmd_write_reg(dev, 2, 4, 0); + mmd_write_reg(dev, 2, 5, 0); + mmd_write_reg(dev, 2, 8, 0x003ff); + + return 0; +} + static int ar8031_phy_fixup(struct phy_device *dev) { u16 val; @@ -169,6 +190,8 @@ static void __init imx6q_enet_phy_init(void) if (IS_BUILTIN(CONFIG_PHYLIB)) { phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); + phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, + ksz9031rn_phy_fixup); phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, ar8031_phy_fixup); } -- 2.7.4