From da1d39e3903bc35be2b5e8d2116fdd5d337244d4 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 9 Nov 2010 17:47:02 +0900 Subject: [PATCH] mmc, sh: Move constants to sh_mmcif.h This moves some constants from sh_mmcif.c to sh_mmcif.h so that they can be used in sh_mmcif_boot_init(). It also alters the definition of SOFT_RST_OFF from (0 << 31) to ~SOFT_RST_ON (= ~(1 << 31)). The former seems bogus. The latter is consistent with the code in sh_mmcif_boot_init(). Cc: Yusuke Goda Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- drivers/mmc/host/sh_mmcif.c | 23 ----------------------- include/linux/mmc/sh_mmcif.h | 39 ++++++++++++++++++++++++++++++++++----- 2 files changed, 34 insertions(+), 28 deletions(-) diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index ddd09840..3f49273 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -62,25 +62,6 @@ /* CE_BLOCK_SET */ #define BLOCK_SIZE_MASK 0x0000ffff -/* CE_CLK_CTRL */ -#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ -#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ -#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ - (1 << 9) | (1 << 8)) /* resp busy timeout */ -#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ - (1 << 5) | (1 << 4)) /* read/write timeout */ -#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ - (1 << 1) | (1 << 0)) /* ccs timeout */ - -/* CE_BUF_ACC */ -#define BUF_ACC_DMAWEN (1 << 25) -#define BUF_ACC_DMAREN (1 << 24) -#define BUF_ACC_BUSW_32 (0 << 17) -#define BUF_ACC_BUSW_16 (1 << 17) -#define BUF_ACC_ATYP (1 << 16) - /* CE_INT */ #define INT_CCSDE (1 << 29) #define INT_CMD12DRE (1 << 26) @@ -165,10 +146,6 @@ STS2_AC12BSYTO | STS2_RSPBSYTO | \ STS2_AC12RSPTO | STS2_RSPTO) -/* CE_VERSION */ -#define SOFT_RST_ON (1 << 31) -#define SOFT_RST_OFF (0 << 31) - #define CLKDEV_EMMC_DATA 52000000 /* 52MHz */ #define CLKDEV_MMC_DATA 20000000 /* 20MHz */ #define CLKDEV_INIT 400000 /* 400 KHz */ diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 5c99da1..a6bfa52 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -59,6 +59,29 @@ struct sh_mmcif_plat_data { #define MMCIF_CE_HOST_STS2 0x0000004C #define MMCIF_CE_VERSION 0x0000007C +/* CE_BUF_ACC */ +#define BUF_ACC_DMAWEN (1 << 25) +#define BUF_ACC_DMAREN (1 << 24) +#define BUF_ACC_BUSW_32 (0 << 17) +#define BUF_ACC_BUSW_16 (1 << 17) +#define BUF_ACC_ATYP (1 << 16) + +/* CE_CLK_CTRL */ +#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ +#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ +#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ + (1 << 9) | (1 << 8)) /* resp busy timeout */ +#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ + (1 << 5) | (1 << 4)) /* read/write timeout */ +#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ + (1 << 1) | (1 << 0)) /* ccs timeout */ + +/* CE_VERSION */ +#define SOFT_RST_ON (1 << 31) +#define SOFT_RST_OFF ~SOFT_RST_ON + static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) { return readl(addr + reg); @@ -149,17 +172,23 @@ static inline void sh_mmcif_boot_init(void __iomem *base) /* reset */ tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000); + sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | SOFT_RST_ON); + sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & SOFT_RST_OFF); /* byte swap */ - sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000); + sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); /* Set block size in MMCIF hardware */ sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); - /* Enable the clock, set it to Bus clock/256 (about 325Khz)*/ - sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff); + /* Enable the clock, set it to Bus clock/256 (about 325Khz). + * It is unclear where 0x70000 comes from or if it is even needed. + * It is there for byte-compatibility with code that is known to + * work. + */ + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | + SCCSTO_29 | 0x70000); /* CMD0 */ sh_mmcif_boot_cmd(base, 0x00000040, 0); -- 2.7.4