From d9edc4bc67c4fd77b30d0a55bc84b775c2f00bab Mon Sep 17 00:00:00 2001 From: Han Xu Date: Mon, 11 Apr 2022 21:52:46 -0500 Subject: [PATCH] mtd: rawnand: gpmi: Add large oob bch setting support The code change proposes a new way to set bch geometry for large oob NAND (oobsize > 1KB). In this case, previous implementation can NOT guarantee the bad block mark always locates in data chunk, so we need a new way to do it. The general idea is, 1.Try all ECC strength from the maximum ecc that controller can support to minimum value required by NAND chip, any ECC strength makes the BBM locate in data chunk can be eligible. 2.If none of them works, using separate ECC for meta, which will add one extra ecc with the same ECC strength as other data chunks. This extra ECC can guarantee BBM located in data chunk, also we need to check if oob can afford it. Signed-off-by: Han Xu Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220412025246.24269-6-han.xu@nxp.com --- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 199 ++++++++++++++++++++++++++++- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 3 + 2 files changed, 197 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 1ac0dc8..0b68d05 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -266,6 +266,39 @@ static bool gpmi_check_ecc(struct gpmi_nand_data *this) return true; } +/* check if bbm locates in data chunk rather than ecc chunk */ +static bool bbm_in_data_chunk(struct gpmi_nand_data *this, + unsigned int *chunk_num) +{ + struct bch_geometry *geo = &this->bch_geometry; + struct nand_chip *chip = &this->nand; + struct mtd_info *mtd = nand_to_mtd(chip); + unsigned int i, j; + + if (geo->ecc0_chunk_size != geo->eccn_chunk_size) { + dev_err(this->dev, + "The size of ecc0_chunk must equal to eccn_chunk\n"); + return false; + } + + i = (mtd->writesize * 8 - geo->metadata_size * 8) / + (geo->gf_len * geo->ecc_strength + + geo->eccn_chunk_size * 8); + + j = (mtd->writesize * 8 - geo->metadata_size * 8) - + (geo->gf_len * geo->ecc_strength + + geo->eccn_chunk_size * 8) * i; + + if (j < geo->eccn_chunk_size * 8) { + *chunk_num = i+1; + dev_dbg(this->dev, "Set ecc to %d and bbm in chunk %d\n", + geo->ecc_strength, *chunk_num); + return true; + } + + return false; +} + /* * If we can get the ECC information from the nand chip, we do not * need to calculate them ourselves. @@ -415,6 +448,134 @@ static inline int get_ecc_strength(struct gpmi_nand_data *this) return round_down(ecc_strength, 2); } +static int set_geometry_for_large_oob(struct gpmi_nand_data *this) +{ + struct bch_geometry *geo = &this->bch_geometry; + struct nand_chip *chip = &this->nand; + struct mtd_info *mtd = nand_to_mtd(chip); + const struct nand_ecc_props *requirements = + nanddev_get_ecc_requirements(&chip->base); + unsigned int block_mark_bit_offset; + unsigned int max_ecc; + unsigned int bbm_chunk; + unsigned int i; + + /* sanity check for the minimum ecc nand required */ + if (!(requirements->strength > 0 && + requirements->step_size > 0)) + return -EINVAL; + geo->ecc_strength = requirements->strength; + + /* check if platform can support this nand */ + if (!gpmi_check_ecc(this)) { + dev_err(this->dev, + "unsupported NAND chip, minimum ecc required %d\n", + geo->ecc_strength); + return -EINVAL; + } + + /* calculate the maximum ecc platform can support*/ + geo->metadata_size = 10; + geo->gf_len = 14; + geo->ecc0_chunk_size = 1024; + geo->eccn_chunk_size = 1024; + geo->ecc_chunk_count = mtd->writesize / geo->eccn_chunk_size; + max_ecc = min(get_ecc_strength(this), + this->devdata->bch_max_ecc_strength); + + /* + * search a supported ecc strength that makes bbm + * located in data chunk + */ + geo->ecc_strength = max_ecc; + while (!(geo->ecc_strength < requirements->strength)) { + if (bbm_in_data_chunk(this, &bbm_chunk)) + goto geo_setting; + geo->ecc_strength -= 2; + } + + /* if none of them works, keep using the minimum ecc */ + /* nand required but changing ecc page layout */ + geo->ecc_strength = requirements->strength; + /* add extra ecc for meta data */ + geo->ecc0_chunk_size = 0; + geo->ecc_chunk_count = (mtd->writesize / geo->eccn_chunk_size) + 1; + geo->ecc_for_meta = 1; + /* check if oob can afford this extra ecc chunk */ + if (mtd->oobsize * 8 < geo->metadata_size * 8 + + geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) { + dev_err(this->dev, "unsupported NAND chip with new layout\n"); + return -EINVAL; + } + + /* calculate in which chunk bbm located */ + bbm_chunk = (mtd->writesize * 8 - geo->metadata_size * 8 - + geo->gf_len * geo->ecc_strength) / + (geo->gf_len * geo->ecc_strength + + geo->eccn_chunk_size * 8) + 1; + +geo_setting: + + geo->page_size = mtd->writesize + geo->metadata_size + + (geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8; + geo->payload_size = mtd->writesize; + + /* + * The auxiliary buffer contains the metadata and the ECC status. The + * metadata is padded to the nearest 32-bit boundary. The ECC status + * contains one byte for every ECC chunk, and is also padded to the + * nearest 32-bit boundary. + */ + geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4); + geo->auxiliary_size = ALIGN(geo->metadata_size, 4) + + ALIGN(geo->ecc_chunk_count, 4); + + if (!this->swap_block_mark) + return 0; + + /* calculate the number of ecc chunk behind the bbm */ + i = (mtd->writesize / geo->eccn_chunk_size) - bbm_chunk + 1; + + block_mark_bit_offset = mtd->writesize * 8 - + (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - i) + + geo->metadata_size * 8); + + geo->block_mark_byte_offset = block_mark_bit_offset / 8; + geo->block_mark_bit_offset = block_mark_bit_offset % 8; + + dev_dbg(this->dev, "BCH Geometry :\n" + "GF length : %u\n" + "ECC Strength : %u\n" + "Page Size in Bytes : %u\n" + "Metadata Size in Bytes : %u\n" + "ECC0 Chunk Size in Bytes: %u\n" + "ECCn Chunk Size in Bytes: %u\n" + "ECC Chunk Count : %u\n" + "Payload Size in Bytes : %u\n" + "Auxiliary Size in Bytes: %u\n" + "Auxiliary Status Offset: %u\n" + "Block Mark Byte Offset : %u\n" + "Block Mark Bit Offset : %u\n" + "Block Mark in chunk : %u\n" + "Ecc for Meta data : %u\n", + geo->gf_len, + geo->ecc_strength, + geo->page_size, + geo->metadata_size, + geo->ecc0_chunk_size, + geo->eccn_chunk_size, + geo->ecc_chunk_count, + geo->payload_size, + geo->auxiliary_size, + geo->auxiliary_status_offset, + geo->block_mark_byte_offset, + geo->block_mark_bit_offset, + bbm_chunk, + geo->ecc_for_meta); + + return 0; +} + static int legacy_set_geometry(struct gpmi_nand_data *this) { struct bch_geometry *geo = &this->bch_geometry; @@ -550,6 +711,14 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this) return 0; } + /* for large oob nand */ + if (mtd->oobsize > 1024) { + dev_dbg(this->dev, "use large oob bch geometry\n"); + err = set_geometry_for_large_oob(this); + if (!err) + return 0; + } + /* otherwise use the minimum ecc nand chip required */ dev_dbg(this->dev, "use minimum ecc bch geometry\n"); err = set_geometry_by_ecc_info(this, requirements->strength, @@ -1433,24 +1602,44 @@ static int gpmi_ecc_read_subpage(struct nand_chip *chip, uint32_t offs, } } + /* + * if there is an ECC dedicate for meta: + * - need to add an extra ECC size when calculating col and page_size, + * if the meta size is NOT zero. + * - ecc0_chunk size need to set to the same size as other chunks, + * if the meta size is zero. + */ + meta = geo->metadata_size; if (first) { - col = meta + (size + ecc_parity_size) * first; + if (geo->ecc_for_meta) + col = meta + ecc_parity_size + + (size + ecc_parity_size) * first; + else + col = meta + (size + ecc_parity_size) * first; + meta = 0; buf = buf + first * size; } ecc_parity_size = geo->gf_len * geo->ecc_strength / 8; - n = last - first + 1; - page_size = meta + (size + ecc_parity_size) * n; + + if (geo->ecc_for_meta && meta) + page_size = meta + ecc_parity_size + + (size + ecc_parity_size) * n; + else + page_size = meta + (size + ecc_parity_size) * n; + ecc_strength = geo->ecc_strength >> 1; - this->bch_flashlayout0 = BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1) | + this->bch_flashlayout0 = BF_BCH_FLASH0LAYOUT0_NBLOCKS( + (geo->ecc_for_meta ? n : n - 1)) | BF_BCH_FLASH0LAYOUT0_META_SIZE(meta) | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this) | BF_BCH_FLASH0LAYOUT0_GF(geo->gf_len, this) | - BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(geo->eccn_chunk_size, this); + BF_BCH_FLASH0LAYOUT0_DATA0_SIZE((geo->ecc_for_meta ? + 0 : geo->ecc0_chunk_size), this); this->bch_flashlayout1 = BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size) | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this) | diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h index 5b217fe..c3ff56a 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h @@ -42,6 +42,8 @@ struct resources { * which the underlying physical block mark appears. * @block_mark_bit_offset: The bit offset into the ECC-based page view at * which the underlying physical block mark appears. + * @ecc_for_meta: The flag to indicate if there is a dedicate ecc + * for meta. */ struct bch_geometry { unsigned int gf_len; @@ -56,6 +58,7 @@ struct bch_geometry { unsigned int auxiliary_status_offset; unsigned int block_mark_byte_offset; unsigned int block_mark_bit_offset; + unsigned int ecc_for_meta; /* ECC for meta data */ }; /** -- 2.7.4