From d9ea21a779278da06d0cbe989594bf542ed213d7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 4 Jun 2013 19:42:22 +0200 Subject: [PATCH] usb: host: make USB_ARCH_HAS_?HCI obsolete The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond their recommended shelf life. They have caused numerous build failures over the years because they are never completely correct, and with the move to splitting out the platform specific back-ends out of the driver, there is no real need for them any more. Also, the use of making USB_ARCH_HAS_HCD depend on it is questionable since one can always enable dummy_hc these days. This patch enables them unconditionally for all platforms and architectures, which means it is now possible to build host controller drivers for machines that are known not to come with this hardware, but that is just how we treat most other drivers. In order to minimise the impact on existing architecture code and defconfig files, all the Kconfig are left present for now. All platforms that currently do 'select USB_ARCH_HAS_*' should subsequently be changed not to select that. All drivers depending on USB_ARCH_HAS_HCD should be changed to depend on USB_SUPPORT instead. Signed-off-by: Arnd Bergmann Acked-by: Alan Stern Cc: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 69 +++++------------------------------------------- drivers/usb/host/Kconfig | 3 --- 2 files changed, 7 insertions(+), 65 deletions(-) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 92e1dc9..73f62ca 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -2,59 +2,15 @@ # USB device configuration # -# many non-PCI SOC chips embed OHCI +# These are unused now, remove them once they are no longer selected config USB_ARCH_HAS_OHCI - boolean - # ARM: - default y if SA1111 - default y if ARCH_OMAP - default y if ARCH_S3C24XX - default y if PXA27x - default y if PXA3xx - default y if ARCH_EP93XX - default y if ARCH_AT91 - default y if MFD_TC6393XB - default y if ARCH_W90X900 - default y if ARCH_DAVINCI_DA8XX - default y if ARCH_CNS3XXX - default y if PLAT_SPEAR - default y if ARCH_EXYNOS - # PPC: - default y if STB03xxx - default y if PPC_MPC52xx - # MIPS: - default y if MIPS_ALCHEMY - default y if MACH_JZ4740 - # more: - default PCI - -# some non-PCI hcds implement EHCI + bool + config USB_ARCH_HAS_EHCI - boolean - default y if FSL_SOC - default y if PPC_MPC512x - default y if ARCH_IXP4XX - default y if ARCH_W90X900 - default y if ARCH_AT91 - default y if ARCH_MXC - default y if ARCH_MXS - default y if ARCH_OMAP3 - default y if ARCH_CNS3XXX - default y if ARCH_VT8500 - default y if PLAT_SPEAR - default y if PLAT_S5P - default y if ARCH_MSM - default y if MICROBLAZE - default y if SPARC_LEON - default y if ARCH_MMP - default y if MACH_LOONGSON1 - default y if PLAT_ORION - default PCI - -# some non-PCI HCDs implement xHCI + bool + config USB_ARCH_HAS_XHCI - boolean - default PCI + bool menuconfig USB_SUPPORT bool "USB support" @@ -71,19 +27,8 @@ config USB_COMMON default y depends on USB || USB_GADGET -# Host-side USB depends on having a host controller -# NOTE: dummy_hcd is always an option, but it's ignored here ... -# NOTE: SL-811 option should be board-specific ... config USB_ARCH_HAS_HCD - boolean - default y if USB_ARCH_HAS_OHCI - default y if USB_ARCH_HAS_EHCI - default y if USB_ARCH_HAS_XHCI - default y if PCMCIA && !M32R # sl811_cs - default y if ARM # SL-811 - default y if BLACKFIN # SL-811 - default y if SUPERH # r8a66597-hcd - default PCI + def_bool y # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. config USB diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d61a026..881609e 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -17,7 +17,6 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" - depends on USB_ARCH_HAS_XHCI ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -43,7 +42,6 @@ endif # USB_XHCI_HCD config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on USB_ARCH_HAS_EHCI ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -358,7 +356,6 @@ config USB_FUSBH200_HCD config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" - depends on USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- -- 2.7.4