From d9ce353a5f2ab703a83c83e78b0736329b4ae8ad Mon Sep 17 00:00:00 2001 From: Johannes Tenschert Date: Wed, 7 Dec 2011 18:25:09 +0100 Subject: [PATCH] staging: bcm: led_control.c: fix parens/braces Signed-off-by: Johannes Tenschert Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/bcm/led_control.c | 295 +++++++++++--------------------------- 1 file changed, 87 insertions(+), 208 deletions(-) diff --git a/drivers/staging/bcm/led_control.c b/drivers/staging/bcm/led_control.c index 890a804..82b9110 100644 --- a/drivers/staging/bcm/led_control.c +++ b/drivers/staging/bcm/led_control.c @@ -29,14 +29,11 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO BOOLEAN bInfinite = FALSE; /* Check if num_of_time is -ve. If yes, blink led in infinite loop */ - if (num_of_time < 0) - { + if (num_of_time < 0) { bInfinite = TRUE; num_of_time = 1; } - while (num_of_time) - { - + while (num_of_time) { if (currdriverstate == Adapter->DriverState) TURN_ON_LED(GPIO_Num, uiLedIndex); @@ -45,16 +42,14 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO currdriverstate != Adapter->DriverState || kthread_should_stop(), msecs_to_jiffies(timeout)); - if (kthread_should_stop()) - { + if (kthread_should_stop()) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; TURN_OFF_LED(GPIO_Num, uiLedIndex); Status = EVENT_SIGNALED; break; } - if (Status) - { + if (Status) { TURN_OFF_LED(GPIO_Num, uiLedIndex); Status = EVENT_SIGNALED; break; @@ -116,15 +111,13 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx); num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx); - while ((Adapter->device_removed == FALSE)) - { + while ((Adapter->device_removed == FALSE)) { timeout = 50; /* * Blink Tx and Rx LED when both Tx and Rx is * in normal bandwidth */ - if (bBlinkBothLED) - { + if (bBlinkBothLED) { /* * Assign minimum number of blinks of * either Tx or Rx. @@ -133,62 +126,44 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, num_of_time = num_of_time_rx; else num_of_time = num_of_time_tx; - if (num_of_time > 0) - { + if (num_of_time > 0) { /* Blink both Tx and Rx LEDs */ if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate) == EVENT_SIGNALED) - { return EVENT_SIGNALED; - } + if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout, num_of_time, currdriverstate) == EVENT_SIGNALED) - { return EVENT_SIGNALED; - } } - if (num_of_time == num_of_time_tx) - { + if (num_of_time == num_of_time_tx) { /* Blink pending rate of Rx */ if (LED_Blink(Adapter, (1 << GPIO_Num_rx), uiRxLedIndex, timeout, num_of_time_rx-num_of_time, currdriverstate) == EVENT_SIGNALED) - { return EVENT_SIGNALED; - } + num_of_time = num_of_time_rx; - } - else - { + } else { /* Blink pending rate of Tx */ if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time_tx-num_of_time, currdriverstate) == EVENT_SIGNALED) - { return EVENT_SIGNALED; - } + num_of_time = num_of_time_tx; } - } - else - { - if (num_of_time == num_of_time_tx) - { + } else { + if (num_of_time == num_of_time_tx) { /* Blink pending rate of Rx */ if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate) == EVENT_SIGNALED) - { return EVENT_SIGNALED; - } - } - else - { + } else { /* Blink pending rate of Tx */ if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout, num_of_time, currdriverstate) == EVENT_SIGNALED) - { return EVENT_SIGNALED; - } } } @@ -197,15 +172,13 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, * wait till delay completes to 1 second */ remDelay = MAX_NUM_OF_BLINKS - num_of_time; - if (remDelay > 0) - { + if (remDelay > 0) { timeout = 100 * remDelay; Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event, currdriverstate != Adapter->DriverState || kthread_should_stop(), msecs_to_jiffies(timeout)); - if (kthread_should_stop()) - { + if (kthread_should_stop()) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; return EVENT_SIGNALED; @@ -266,16 +239,14 @@ static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X", ulParamOffset, usParamLen); puBuffer = kmalloc(usParamLen, GFP_KERNEL); - if (!puBuffer) - { + if (!puBuffer) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum Allocation failed"); return -ENOMEM; } /* Read the DSD data from the parameter offset. */ - if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen)) - { + if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen)) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; @@ -289,8 +260,7 @@ static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset * End of the DSD parameter will have a TWO bytes checksum stored in it. * Read it and compare with the calculated Checksum. */ - if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2)) - { + if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2)) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; @@ -302,8 +272,7 @@ static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset * Compare the checksum calculated with the checksum read * from DSD section */ - if (usChecksumCalculated ^ usChksmOrg) - { + if (usChecksumCalculated ^ usChksmOrg) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum: Checksums don't match"); Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; @@ -345,9 +314,7 @@ static INT ValidateHWParmStructure(PMINI_ADAPTER Adapter, ULONG ulHwParamOffset) BeceemNVMRead(Adapter, (PUINT)&HwParamLen, ulHwParamOffset, 2); HwParamLen = ntohs(HwParamLen); if (0 == HwParamLen || HwParamLen > Adapter->uiNVMDSDSize) - { return STATUS_IMAGE_CHECKSUM_MISMATCH; - } BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen); Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset, HwParamLen); @@ -369,14 +336,11 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "usEEPROMVersion: Minor:0x%X Major:0x%x", usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF)); - if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) - { + if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) { BeceemNVMRead(Adapter, (PUINT)&usHwParamData, EEPROM_HW_PARAM_POINTER_ADDRESS, 2); usHwParamData = ntohs(usHwParamData); dwReadValue = usHwParamData; - } - else - { + } else { /* * Validate Compatibility section and then read HW param * if compatibility section is valid. @@ -386,9 +350,8 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ COMPATIBILITY_SECTION_LENGTH_MAP5); if (Status != STATUS_SUCCESS) - { return Status; - } + BeceemNVMRead(Adapter, (PUINT)&dwReadValue, EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4); dwReadValue = ntohl(dwReadValue); } @@ -404,14 +367,11 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ */ if (dwReadValue < DSD_START_OFFSET || dwReadValue > (Adapter->uiNVMDSDSize-DSD_START_OFFSET)) - { return STATUS_IMAGE_CHECKSUM_MISMATCH; - } Status = ValidateHWParmStructure(Adapter, dwReadValue); - if (Status) { + if (Status) return Status; - } /* * Add DSD_START_OFFSET to the offset read from the EEPROM. @@ -429,35 +389,25 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ * number to GPIO pin number to GPIO_Array */ BeceemNVMRead(Adapter, (UINT *)ucGPIOInfo, dwReadValue, 32); - for (ucIndex = 0; ucIndex < 32; ucIndex++) - { + for (ucIndex = 0; ucIndex < 32; ucIndex++) { - switch (ucGPIOInfo[ucIndex]) - { + switch (ucGPIOInfo[ucIndex]) { case RED_LED: - { GPIO_Array[RED_LED] = ucIndex; Adapter->gpioBitMap |= (1 << ucIndex); break; - } case BLUE_LED: - { GPIO_Array[BLUE_LED] = ucIndex; Adapter->gpioBitMap |= (1 << ucIndex); break; - } case YELLOW_LED: - { GPIO_Array[YELLOW_LED] = ucIndex; Adapter->gpioBitMap |= (1 << ucIndex); break; - } case GREEN_LED: - { GPIO_Array[GREEN_LED] = ucIndex; Adapter->gpioBitMap |= (1 << ucIndex); break; - } default: break; } @@ -479,8 +429,7 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread UCHAR bData = 0; memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1); - if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) - { + if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) { BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n"); return -ENOENT; } @@ -488,13 +437,10 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread /* Populate GPIO_Array with GPIO numbers for LED functions */ /* Read the GPIO numbers from EEPROM */ Status = ReadLEDInformationFromEEPROM(Adapter, GPIO_Array); - if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH) - { + if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH) { *bEnableThread = FALSE; return STATUS_SUCCESS; - } - else if (Status) - { + } else if (Status) { *bEnableThread = FALSE; return Status; } @@ -512,16 +458,14 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread * driver state and LED blink state. */ - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) - { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { bData = *puCFGData; /* * Check Bit 8 for polarity. If it is set, * polarity is reverse polarity */ - if (bData & 0x80) - { + if (bData & 0x80) { Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 0; /* unset the bit 8 */ bData = bData & 0x7f; @@ -546,8 +490,7 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread * Check if all the LED settings are disabled. If it is disabled, * dont launch the LED control thread. */ - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) - { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { if ((Adapter->LEDInfo.LEDState[uiIndex].LED_Type == DISABLE_GPIO_NUM) || (Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0x7f) || (Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0)) @@ -581,8 +524,7 @@ static VOID LedGpioInit(PMINI_ADAPTER Adapter) /* Set all LED GPIO Mode to output mode */ if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0) BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: RDM Failed\n"); - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) - { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num); TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num, uiIndex); @@ -600,36 +542,25 @@ static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *G *GPIO_num_tx = DISABLE_GPIO_NUM; *GPIO_num_rx = DISABLE_GPIO_NUM; - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) - { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { if ((currdriverstate == NORMAL_OPERATION) || (currdriverstate == IDLEMODE_EXIT) || - (currdriverstate == FW_DOWNLOAD)) - { - if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) - { - if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) - { - if (*GPIO_num_tx == DISABLE_GPIO_NUM) - { + (currdriverstate == FW_DOWNLOAD)) { + if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) { + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) { + if (*GPIO_num_tx == DISABLE_GPIO_NUM) { *GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num; *uiLedTxIndex = uiIndex; - } - else - { + } else { *GPIO_num_rx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num; *uiLedRxIndex = uiIndex; } } } - } - else - { - if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) - { - if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) - { + } else { + if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) { + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) { *GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num; *uiLedTxIndex = uiIndex; } @@ -664,8 +595,7 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) GPIO_num = DISABLE_GPIO_NUM; - while (TRUE) - { + while (TRUE) { /* Wait till event is triggered */ if ((GPIO_num == DISABLE_GPIO_NUM) || @@ -674,13 +604,10 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) (currdriverstate != LOWPOWER_MODE_ENTER)) || (currdriverstate == LED_THREAD_INACTIVE)) - { Status = wait_event_interruptible(Adapter->LEDInfo.notify_led_event, currdriverstate != Adapter->DriverState || kthread_should_stop()); - } - if (kthread_should_stop() || Adapter->device_removed) - { + if (kthread_should_stop() || Adapter->device_removed) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; TURN_OFF_LED(1 << GPIO_num, uiLedIndex); @@ -688,32 +615,24 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) } if (GPIO_num != DISABLE_GPIO_NUM) - { TURN_OFF_LED(1 << GPIO_num, uiLedIndex); - } - if (Adapter->LEDInfo.bLedInitDone == FALSE) - { + if (Adapter->LEDInfo.bLedInitDone == FALSE) { LedGpioInit(Adapter); Adapter->LEDInfo.bLedInitDone = TRUE; } - switch (Adapter->DriverState) - { + switch (Adapter->DriverState) { case DRIVER_INIT: - { currdriverstate = DRIVER_INIT; /* Adapter->DriverState; */ BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate); if (GPIO_num != DISABLE_GPIO_NUM) - { TURN_ON_LED(1 << GPIO_num, uiLedIndex); - } - } + break; case FW_DOWNLOAD: - { /* * BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, * LED_DUMP_INFO, DBG_LVL_ALL, @@ -722,22 +641,16 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) currdriverstate = FW_DOWNLOAD; BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate); - if (GPIO_num != DISABLE_GPIO_NUM) - { + if (GPIO_num != DISABLE_GPIO_NUM) { timeout = 50; LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex, timeout, -1, currdriverstate); } - } break; case FW_DOWNLOAD_DONE: - { currdriverstate = FW_DOWNLOAD_DONE; BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate); if (GPIO_num != DISABLE_GPIO_NUM) - { TURN_ON_LED(1 << GPIO_num, uiLedIndex); - } - } break; case SHUTDOWN_EXIT: @@ -746,62 +659,49 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) * state as well. */ case NO_NETWORK_ENTRY: - { currdriverstate = NO_NETWORK_ENTRY; BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyGPIONum, currdriverstate); if (GPIO_num != DISABLE_GPIO_NUM) - { TURN_ON_LED(1 << GPIO_num, uiLedIndex); - } - } break; case NORMAL_OPERATION: { - UCHAR GPIO_num_tx = DISABLE_GPIO_NUM; - UCHAR GPIO_num_rx = DISABLE_GPIO_NUM; - UCHAR uiLEDTx = 0; - UCHAR uiLEDRx = 0; - currdriverstate = NORMAL_OPERATION; - Adapter->LEDInfo.bIdle_led_off = FALSE; - - BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate); - if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) - { - GPIO_num = DISABLE_GPIO_NUM; - } - else - { - /* - * If single LED is selected, use same - * for both Tx and Rx - */ - if (GPIO_num_tx == DISABLE_GPIO_NUM) - { - GPIO_num_tx = GPIO_num_rx; - uiLEDTx = uiLEDRx; - } - else if (GPIO_num_rx == DISABLE_GPIO_NUM) - { - GPIO_num_rx = GPIO_num_tx; - uiLEDRx = uiLEDTx; + UCHAR GPIO_num_tx = DISABLE_GPIO_NUM; + UCHAR GPIO_num_rx = DISABLE_GPIO_NUM; + UCHAR uiLEDTx = 0; + UCHAR uiLEDRx = 0; + currdriverstate = NORMAL_OPERATION; + Adapter->LEDInfo.bIdle_led_off = FALSE; + + BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate); + if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) { + GPIO_num = DISABLE_GPIO_NUM; + } else { + /* + * If single LED is selected, use same + * for both Tx and Rx + */ + if (GPIO_num_tx == DISABLE_GPIO_NUM) { + GPIO_num_tx = GPIO_num_rx; + uiLEDTx = uiLEDRx; + } else if (GPIO_num_rx == DISABLE_GPIO_NUM) { + GPIO_num_rx = GPIO_num_tx; + uiLEDRx = uiLEDTx; + } + /* + * Blink the LED in proportionate + * to Tx and Rx transmissions. + */ + LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx, currdriverstate); } - /* - * Blink the LED in proportionate - * to Tx and Rx transmissions. - */ - LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx, currdriverstate); - } } break; case LOWPOWER_MODE_ENTER: - { currdriverstate = LOWPOWER_MODE_ENTER; - if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) - { + if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) { /* Turn OFF all the LED */ uiResetValue = 0; - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) - { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } @@ -813,47 +713,35 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) wake_up(&Adapter->LEDInfo.idleModeSyncEvent); GPIO_num = DISABLE_GPIO_NUM; break; - } case IDLEMODE_CONTINUE: - { currdriverstate = IDLEMODE_CONTINUE; GPIO_num = DISABLE_GPIO_NUM; - } break; case IDLEMODE_EXIT: - { - } break; case DRIVER_HALT: - { currdriverstate = DRIVER_HALT; GPIO_num = DISABLE_GPIO_NUM; - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) - { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } /* Adapter->DriverState = DRIVER_INIT; */ - } break; case LED_THREAD_INACTIVE: - { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "InActivating LED thread..."); currdriverstate = LED_THREAD_INACTIVE; Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY; Adapter->LEDInfo.bLedInitDone = FALSE; /* disable ALL LED */ - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) - { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } - } break; case LED_THREAD_ACTIVE: - { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Activating LED thread again..."); if (Adapter->LinkUpStatus == FALSE) Adapter->DriverState = NO_NETWORK_ENTRY; @@ -861,7 +749,6 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) Adapter->DriverState = NORMAL_OPERATION; Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY; - } break; /* return; */ default: @@ -882,36 +769,29 @@ int InitLedSettings(PMINI_ADAPTER Adapter) * is used to change the polarity of the LED. */ - for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { + for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 1; - } /* * Read the LED settings of CONFIG file and map it * to GPIO numbers in EEPROM */ Status = ReadConfigFileStructure(Adapter, &bEnableThread); - if (STATUS_SUCCESS != Status) - { + if (STATUS_SUCCESS != Status) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: FAILED in ReadConfigFileStructure\n"); return Status; } - if (Adapter->LEDInfo.led_thread_running) - { - if (bEnableThread) + if (Adapter->LEDInfo.led_thread_running) { + if (bEnableThread) { ; - else - { + } else { Adapter->DriverState = DRIVER_HALT; wake_up(&Adapter->LEDInfo.notify_led_event); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; } - } - - else if (bEnableThread) - { + } else if (bEnableThread) { /* Create secondary thread to handle the LEDs */ init_waitqueue_head(&Adapter->LEDInfo.notify_led_event); init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent); @@ -919,8 +799,7 @@ int InitLedSettings(PMINI_ADAPTER Adapter) Adapter->LEDInfo.bIdle_led_off = FALSE; Adapter->LEDInfo.led_cntrl_threadid = kthread_run((int (*)(void *)) LEDControlThread, Adapter, "led_control_thread"); - if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) - { + if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) { BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n"); Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid); -- 2.7.4