From d89564efe79419a093e966a959bf5ba2c94e693f Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 14 Sep 2016 09:52:07 -0700 Subject: [PATCH] regulator: core: Don't skip set_voltage_time when ramp delay disabled The current code assumes that only the ramp_delay is used to determine the time needed for the voltage to stabilize. This may be true for the calculation done by regulator_set_voltage_time_sel(), however regulators can implement their own set_voltage_time_sel() op which would be skipped if no ramp delay is specified. Remove the check in _regulator_do_set_voltage(), the functions calculating the ramp delay return 0 anyway when the ramp delay is not configured. Signed-off-by: Matthias Kaehlcke Signed-off-by: Mark Brown --- drivers/regulator/core.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b0076cc..df3028b 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2804,9 +2804,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, goto out; /* Call set_voltage_time_sel if successfully obtained old_selector */ - if (!rdev->constraints->ramp_disable && old_selector >= 0 - && old_selector != selector) { - + if (!old_selector >= 0 && old_selector != selector) { delay = ops->set_voltage_time_sel(rdev, old_selector, selector); if (delay < 0) { @@ -3051,10 +3049,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, else if (rdev->desc->ramp_delay) ramp_delay = rdev->desc->ramp_delay; - if (ramp_delay == 0) { - rdev_warn(rdev, "ramp_delay not set\n"); + if (ramp_delay == 0) return 0; - } /* sanity check */ if (!rdev->desc->ops->list_voltage) -- 2.7.4