From d62dd8a0c808b6afac5c85547a84aad7b187b108 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sun, 25 Nov 2018 09:43:57 +0000 Subject: [PATCH] mlxsw: spectrum_fid: Introduce emulated 802.1Q FIDs The driver uses 802.1Q FIDs when offloading a VLAN-aware bridge. Unfortunately, it is not possible to assign a VNI to such FIDs, which prompts the driver to forbid the enslavement of VxLAN devices to a VLAN-aware bridge. Workaround this hardware limitation by creating a new family of FIDs, emulated 802.1Q FIDs. These FIDs are emulated using 802.1D FIDs, which can be assigned a VNI. The downside of this approach is that multiple {Port, VID}->FID entries are required, whereas only a single VID->FID is required with "true" 802.1Q FIDs. Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c index e1739cd..99ccb11 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c @@ -801,6 +801,39 @@ static const struct mlxsw_sp_fid_family mlxsw_sp_fid_8021d_family = { .lag_vid_valid = 1, }; +static const struct mlxsw_sp_fid_ops mlxsw_sp_fid_8021q_emu_ops = { + .setup = mlxsw_sp_fid_8021q_setup, + .configure = mlxsw_sp_fid_8021d_configure, + .deconfigure = mlxsw_sp_fid_8021d_deconfigure, + .index_alloc = mlxsw_sp_fid_8021d_index_alloc, + .compare = mlxsw_sp_fid_8021q_compare, + .flood_index = mlxsw_sp_fid_8021d_flood_index, + .port_vid_map = mlxsw_sp_fid_8021d_port_vid_map, + .port_vid_unmap = mlxsw_sp_fid_8021d_port_vid_unmap, + .vni_set = mlxsw_sp_fid_8021d_vni_set, + .vni_clear = mlxsw_sp_fid_8021d_vni_clear, + .nve_flood_index_set = mlxsw_sp_fid_8021d_nve_flood_index_set, + .nve_flood_index_clear = mlxsw_sp_fid_8021d_nve_flood_index_clear, +}; + +/* There are 4K-2 emulated 802.1Q FIDs, starting right after the 802.1D FIDs */ +#define MLXSW_SP_FID_8021Q_EMU_START (VLAN_N_VID + MLXSW_SP_FID_8021D_MAX) +#define MLXSW_SP_FID_8021Q_EMU_END (MLXSW_SP_FID_8021Q_EMU_START + \ + VLAN_VID_MASK - 2) + +/* Range and flood configuration must match mlxsw_config_profile */ +static const struct mlxsw_sp_fid_family mlxsw_sp_fid_8021q_emu_family = { + .type = MLXSW_SP_FID_TYPE_8021Q, + .fid_size = sizeof(struct mlxsw_sp_fid_8021q), + .start_index = MLXSW_SP_FID_8021Q_EMU_START, + .end_index = MLXSW_SP_FID_8021Q_EMU_END, + .flood_tables = mlxsw_sp_fid_8021d_flood_tables, + .nr_flood_tables = ARRAY_SIZE(mlxsw_sp_fid_8021d_flood_tables), + .rif_type = MLXSW_SP_RIF_TYPE_VLAN, + .ops = &mlxsw_sp_fid_8021q_emu_ops, + .lag_vid_valid = 1, +}; + static int mlxsw_sp_fid_rfid_configure(struct mlxsw_sp_fid *fid) { /* rFIDs are allocated by the device during init */ -- 2.7.4