From d6062a6d62c643a06c393745d032da3e6441d4bd Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 9 Mar 2018 14:53:19 +0000 Subject: [PATCH] irqchip/gic-v3: Reset APgRn registers at boot time Booting a crash kernel while in an interrupt handler is likely to leave the Active Priority Registers with some state that is not relevant to the new kernel, and is likely to lead to erratic behaviours such as interrupts not firing as their priority is already active. As a sanity measure, wipe the APRs clean on startup. We make sure to wipe both group 0 and 1 registers in order to avoid any surprise. Signed-off-by: Marc Zyngier --- arch/arm/include/asm/arch_gicv3.h | 41 +++++++++++++++++++++++++++++---------- drivers/irqchip/irq-gic-v3.c | 23 ++++++++++++++++++++++ 2 files changed, 54 insertions(+), 10 deletions(-) diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 1070044..27288bd 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -35,6 +35,18 @@ #define ICC_IGRPEN1 __ACCESS_CP15(c12, 0, c12, 7) #define ICC_BPR1 __ACCESS_CP15(c12, 0, c12, 3) +#define __ICC_AP0Rx(x) __ACCESS_CP15(c12, 0, c8, 4 | x) +#define ICC_AP0R0 __ICC_AP0Rx(0) +#define ICC_AP0R1 __ICC_AP0Rx(1) +#define ICC_AP0R2 __ICC_AP0Rx(2) +#define ICC_AP0R3 __ICC_AP0Rx(3) + +#define __ICC_AP1Rx(x) __ACCESS_CP15(c12, 0, c9, x) +#define ICC_AP1R0 __ICC_AP1Rx(0) +#define ICC_AP1R1 __ICC_AP1Rx(1) +#define ICC_AP1R2 __ICC_AP1Rx(2) +#define ICC_AP1R3 __ICC_AP1Rx(3) + #define ICC_HSRE __ACCESS_CP15(c12, 4, c9, 5) #define ICH_VSEIR __ACCESS_CP15(c12, 4, c9, 4) @@ -86,17 +98,17 @@ #define ICH_LRC14 __LRC8(6) #define ICH_LRC15 __LRC8(7) -#define __AP0Rx(x) __ACCESS_CP15(c12, 4, c8, x) -#define ICH_AP0R0 __AP0Rx(0) -#define ICH_AP0R1 __AP0Rx(1) -#define ICH_AP0R2 __AP0Rx(2) -#define ICH_AP0R3 __AP0Rx(3) +#define __ICH_AP0Rx(x) __ACCESS_CP15(c12, 4, c8, x) +#define ICH_AP0R0 __ICH_AP0Rx(0) +#define ICH_AP0R1 __ICH_AP0Rx(1) +#define ICH_AP0R2 __ICH_AP0Rx(2) +#define ICH_AP0R3 __ICH_AP0Rx(3) -#define __AP1Rx(x) __ACCESS_CP15(c12, 4, c9, x) -#define ICH_AP1R0 __AP1Rx(0) -#define ICH_AP1R1 __AP1Rx(1) -#define ICH_AP1R2 __AP1Rx(2) -#define ICH_AP1R3 __AP1Rx(3) +#define __ICH_AP1Rx(x) __ACCESS_CP15(c12, 4, c9, x) +#define ICH_AP1R0 __ICH_AP1Rx(0) +#define ICH_AP1R1 __ICH_AP1Rx(1) +#define ICH_AP1R2 __ICH_AP1Rx(2) +#define ICH_AP1R3 __ICH_AP1Rx(3) /* A32-to-A64 mappings used by VGIC save/restore */ @@ -125,6 +137,15 @@ static inline u64 read_ ## a64(void) \ return val; \ } +CPUIF_MAP(ICC_AP0R0, ICC_AP0R0_EL1) +CPUIF_MAP(ICC_AP0R1, ICC_AP0R1_EL1) +CPUIF_MAP(ICC_AP0R2, ICC_AP0R2_EL1) +CPUIF_MAP(ICC_AP0R3, ICC_AP0R3_EL1) +CPUIF_MAP(ICC_AP1R0, ICC_AP1R0_EL1) +CPUIF_MAP(ICC_AP1R1, ICC_AP1R1_EL1) +CPUIF_MAP(ICC_AP1R2, ICC_AP1R2_EL1) +CPUIF_MAP(ICC_AP1R3, ICC_AP1R3_EL1) + CPUIF_MAP(ICH_HCR, ICH_HCR_EL2) CPUIF_MAP(ICH_VTR, ICH_VTR_EL2) CPUIF_MAP(ICH_MISR, ICH_MISR_EL2) diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index d99cc07..0ea0250 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -532,6 +532,7 @@ static void gic_cpu_sys_reg_init(void) int i, cpu = smp_processor_id(); u64 mpidr = cpu_logical_map(cpu); u64 need_rss = MPIDR_RS(mpidr); + u32 val; /* * Need to check that the SRE bit has actually been set. If @@ -562,6 +563,28 @@ static void gic_cpu_sys_reg_init(void) gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop_dir); } + val = gic_read_ctlr(); + val &= ICC_CTLR_EL1_PRI_BITS_MASK; + val >>= ICC_CTLR_EL1_PRI_BITS_SHIFT; + + switch(val + 1) { + case 8: + case 7: + write_gicreg(0, ICC_AP0R3_EL1); + write_gicreg(0, ICC_AP1R3_EL1); + write_gicreg(0, ICC_AP0R2_EL1); + write_gicreg(0, ICC_AP1R2_EL1); + case 6: + write_gicreg(0, ICC_AP0R1_EL1); + write_gicreg(0, ICC_AP1R1_EL1); + case 5: + case 4: + write_gicreg(0, ICC_AP0R0_EL1); + write_gicreg(0, ICC_AP1R0_EL1); + } + + isb(); + /* ... and let's hit the road... */ gic_write_grpen1(1); -- 2.7.4