From d51da4d4a9e6592d2e5645943a23e25dfd91939e Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Mon, 23 Feb 2015 09:40:33 +0530 Subject: [PATCH] dmaengine: qcom_bam_dma: Add support for BAM v1.7.0 Add register offset table entry for the newer (v1.7.0) version of the BAM IP found on MSM8916. Update the DT bindings documentation. Signed-off-by: Archit Taneja Tested-by: Ivan T. Ivanov Signed-off-by: Vinod Koul --- .../devicetree/bindings/dma/qcom_bam_dma.txt | 1 + drivers/dma/qcom_bam_dma.c | 30 ++++++++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt index f8c3311..1c9d48e 100644 --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt @@ -4,6 +4,7 @@ Required properties: - compatible: must be one of the following: * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 + * "qcom,bam-v1.7.0" for MSM8916 - reg: Address range for DMA registers - interrupts: Should contain the one interrupt shared by all channels - #dma-cells: must be <1>, the cell in the dmas property of the client device diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom_bam_dma.c index cbacee5..1576cd9 100644 --- a/drivers/dma/qcom_bam_dma.c +++ b/drivers/dma/qcom_bam_dma.c @@ -171,6 +171,35 @@ static const struct reg_offset_data bam_v1_4_reg_info[] = { [BAM_P_FIFO_SIZES] = { 0x1820, 0x00, 0x1000, 0x00 }, }; +static const struct reg_offset_data bam_v1_7_reg_info[] = { + [BAM_CTRL] = { 0x00000, 0x00, 0x00, 0x00 }, + [BAM_REVISION] = { 0x01000, 0x00, 0x00, 0x00 }, + [BAM_NUM_PIPES] = { 0x01008, 0x00, 0x00, 0x00 }, + [BAM_DESC_CNT_TRSHLD] = { 0x00008, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS] = { 0x03010, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_MSK] = { 0x03014, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_UNMASKED] = { 0x03018, 0x00, 0x00, 0x00 }, + [BAM_IRQ_STTS] = { 0x00014, 0x00, 0x00, 0x00 }, + [BAM_IRQ_CLR] = { 0x00018, 0x00, 0x00, 0x00 }, + [BAM_IRQ_EN] = { 0x0001C, 0x00, 0x00, 0x00 }, + [BAM_CNFG_BITS] = { 0x0007C, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_EE] = { 0x03000, 0x00, 0x00, 0x1000 }, + [BAM_IRQ_SRCS_MSK_EE] = { 0x03004, 0x00, 0x00, 0x1000 }, + [BAM_P_CTRL] = { 0x13000, 0x1000, 0x00, 0x00 }, + [BAM_P_RST] = { 0x13004, 0x1000, 0x00, 0x00 }, + [BAM_P_HALT] = { 0x13008, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_STTS] = { 0x13010, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_CLR] = { 0x13014, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_EN] = { 0x13018, 0x1000, 0x00, 0x00 }, + [BAM_P_EVNT_DEST_ADDR] = { 0x1382C, 0x00, 0x1000, 0x00 }, + [BAM_P_EVNT_REG] = { 0x13818, 0x00, 0x1000, 0x00 }, + [BAM_P_SW_OFSTS] = { 0x13800, 0x00, 0x1000, 0x00 }, + [BAM_P_DATA_FIFO_ADDR] = { 0x13824, 0x00, 0x1000, 0x00 }, + [BAM_P_DESC_FIFO_ADDR] = { 0x1381C, 0x00, 0x1000, 0x00 }, + [BAM_P_EVNT_GEN_TRSHLD] = { 0x13828, 0x00, 0x1000, 0x00 }, + [BAM_P_FIFO_SIZES] = { 0x13820, 0x00, 0x1000, 0x00 }, +}; + /* BAM CTRL */ #define BAM_SW_RST BIT(0) #define BAM_EN BIT(1) @@ -1051,6 +1080,7 @@ static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan, static const struct of_device_id bam_of_match[] = { { .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info }, { .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info }, + { .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_reg_info }, {} }; -- 2.7.4