From d483b983a5efaa101714186a8485a5fd4de42fba Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 5 Jul 2012 01:27:14 -0700 Subject: [PATCH] ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode We can control renesas_usbhs driver as 2 way which are autonomy mode and external IRQ trigger mode. Autonomy mode is very easy settings for platform, but it required USB power domain always ON, since its connection/disconnection IRQ come from it. If platform uses external IRQ trigger mode, USB power domain can be OFF, since its connection/disconnection IRQ come from external IRQ. This patch enable external IRQ mode. Now it is possible to add USB support on A4SP domain. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/board-armadillo800eva.c | 46 +++++++++++++++++++++----- 1 file changed, 38 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 12f96663..79891a6 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -133,14 +133,8 @@ * These are a little bit complex. * see * usbhsf_power_ctrl() - * - * CAUTION - * - * It uses autonomy mode for USB hotplug at this point - * (= usbhs_private.platform_callback.get_vbus is NULL), - * since we don't know what's happen on PM control - * on this workaround. */ +#define IRQ7 evt2irq(0x02e0) #define USBCR1 0xe605810a #define USBH 0xC6700000 #define USBH_USBCTR 0x10834 @@ -220,6 +214,20 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, } } +static int usbhsf_get_vbus(struct platform_device *pdev) +{ + return gpio_get_value(GPIO_PORT209); +} + +static irqreturn_t usbhsf_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + + renesas_usbhs_call_notify_hotplug(pdev); + + return IRQ_HANDLED; +} + static void usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -243,11 +251,14 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->host = NULL; priv->func = NULL; priv->usbh_base = NULL; + + free_irq(IRQ7, pdev); } static int usbhsf_hardware_init(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); + int ret; priv->phy = clk_get(&pdev->dev, "phy"); priv->usb24 = clk_get(&pdev->dev, "usb24"); @@ -267,6 +278,14 @@ static int usbhsf_hardware_init(struct platform_device *pdev) return -EIO; } + ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH); + /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */ clk_set_rate(priv->usb24, clk_get_rate(clk_get_parent(priv->usb24))); @@ -278,6 +297,7 @@ static struct usbhsf_private usbhsf_private = { .info = { .platform_callback = { .get_id = usbhsf_get_id, + .get_vbus = usbhsf_get_vbus, .hardware_init = usbhsf_hardware_init, .hardware_exit = usbhsf_hardware_exit, .power_ctrl = usbhsf_power_ctrl, @@ -1018,7 +1038,17 @@ static void __init eva_init(void) /* USB Host */ } else { /* USB Func */ - gpio_request(GPIO_FN_VBUS, NULL); + /* + * A1 chip has 2 IRQ7 pin and it was controled by MSEL register. + * OTOH, usbhs interrupt needs its value (HI/LOW) to decide + * USB connection/disconnection (usbhsf_get_vbus()). + * This means we needs to select GPIO_FN_IRQ7_PORT209 first, + * and select GPIO_PORT209 here + */ + gpio_request(GPIO_FN_IRQ7_PORT209, NULL); + gpio_request(GPIO_PORT209, NULL); + gpio_direction_input(GPIO_PORT209); + platform_device_register(&usbhsf_device); } -- 2.7.4